cregit-Linux how code gets into the kernel

Release 4.17 arch/arm/mach-imx/mach-kzm_arm11_01.c

/*
 * KZM-ARM11-01 support
 *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
 *
 * based on code for MX31ADS,
 *  Copyright (C) 2000 Deep Blue Solutions Ltd
 *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
 *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/gpio.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/smsc911x.h>
#include <linux/types.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>

#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/memory.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>

#include "common.h"
#include "devices-imx31.h"
#include "hardware.h"
#include "iomux-mx3.h"


#define KZM_ARM11_IO_ADDRESS(x) (IOMEM(                                 \
        IMX_IO_P2V_MODULE(x, MX31_CS4) ?:                               \
        IMX_IO_P2V_MODULE(x, MX31_CS5)) ?:                              \
        MX31_IO_ADDRESS(x))

/*
 *  KZM-ARM11-01 Board Control Registers on FPGA
 */

#define KZM_ARM11_CTL1		(MX31_CS4_BASE_ADDR + 0x1000)

#define KZM_ARM11_CTL2		(MX31_CS4_BASE_ADDR + 0x1001)

#define KZM_ARM11_RSW1		(MX31_CS4_BASE_ADDR + 0x1002)

#define KZM_ARM11_BACK_LIGHT	(MX31_CS4_BASE_ADDR + 0x1004)

#define KZM_ARM11_FPGA_REV	(MX31_CS4_BASE_ADDR + 0x1008)

#define KZM_ARM11_7SEG_LED	(MX31_CS4_BASE_ADDR + 0x1010)

#define KZM_ARM11_LEDS		(MX31_CS4_BASE_ADDR + 0x1020)

#define KZM_ARM11_DIPSW2	(MX31_CS4_BASE_ADDR + 0x1003)

/*
 * External UART for touch panel on FPGA
 */

#define KZM_ARM11_16550		(MX31_CS4_BASE_ADDR + 0x1050)

#if IS_ENABLED(CONFIG_SERIAL_8250)
/*
 * KZM-ARM11-01 has an external UART on FPGA
 */

static struct plat_serial8250_port serial_platform_data[] = {
	{
		.membase	= KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
		.mapbase	= KZM_ARM11_16550,
		/* irq number is run-time assigned */
		.irqflags	= IRQ_TYPE_EDGE_RISING,
		.uartclk	= 14745600,
		.regshift	= 0,
		.iotype		= UPIO_MEM,
		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
				  UPF_BUGGY_UART,
        },
	{},
};


static struct resource serial8250_resources[] = {
	{
		.start	= KZM_ARM11_16550,
		.end	= KZM_ARM11_16550 + 0x10,
		.flags	= IORESOURCE_MEM,
        },
	{
		/* irq number is run-time assigned */
		.flags	= IORESOURCE_IRQ,
        },
};


static struct platform_device serial_device = {
	.name		= "serial8250",
	.id		= PLAT8250_DEV_PLATFORM,
	.dev		= {
				.platform_data = serial_platform_data,
                          },
	.num_resources	= ARRAY_SIZE(serial8250_resources),
	.resource	= serial8250_resources,
};


static int __init kzm_init_ext_uart(void) { u8 tmp; /* * GPIO 1-1: external UART interrupt line */ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)); gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int"); gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); /* * Unmask UART interrupt */ tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); tmp |= 0x2; __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); serial_platform_data[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); serial8250_resources[1].start = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); serial8250_resources[1].end = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); return platform_device_register(&serial_device); }

Contributors

PersonTokensPropCommitsCommitProp
Yoichi Yuasa7160.17%133.33%
Shawn Guo4538.14%133.33%
Uwe Kleine-König21.69%133.33%
Total118100.00%3100.00%

#else
static inline int kzm_init_ext_uart(void) { return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Yoichi Yuasa12100.00%1100.00%
Total12100.00%1100.00%

#endif /* * SMSC LAN9118 */ #if IS_ENABLED(CONFIG_SMSC911X) static struct smsc911x_platform_config kzm_smsc9118_config = { .phy_interface = PHY_INTERFACE_MODE_MII, .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; static struct resource kzm_smsc9118_resources[] = { { .start = MX31_CS5_BASE_ADDR, .end = MX31_CS5_BASE_ADDR + SZ_128K - 1, .flags = IORESOURCE_MEM, }, { /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; static struct platform_device kzm_smsc9118_device = { .name = "smsc911x", .id = -1, .num_resources = ARRAY_SIZE(kzm_smsc9118_resources), .resource = kzm_smsc9118_resources, .dev = { .platform_data = &kzm_smsc9118_config, }, }; static struct regulator_consumer_supply dummy_supplies[] = { REGULATOR_SUPPLY("vdd33a", "smsc911x"), REGULATOR_SUPPLY("vddvario", "smsc911x"), };
static int __init kzm_init_smsc9118(void) { /* * GPIO 1-2: SMSC9118 interrupt line */ mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO)); gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int"); gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); kzm_smsc9118_resources[1].start = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); kzm_smsc9118_resources[1].end = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); return platform_device_register(&kzm_smsc9118_device); }

Contributors

PersonTokensPropCommitsCommitProp
Yoichi Yuasa4551.72%133.33%
Shawn Guo3034.48%133.33%
Fabio Estevam1213.79%133.33%
Total87100.00%3100.00%

#else
static inline int kzm_init_smsc9118(void) { return 0; }

Contributors

PersonTokensPropCommitsCommitProp
Yoichi Yuasa12100.00%1100.00%
Total12100.00%1100.00%

#endif #if IS_ENABLED(CONFIG_SERIAL_IMX) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, };
static void __init kzm_init_imx_uart(void) { imx31_add_imx_uart0(&uart_pdata); imx31_add_imx_uart1(&uart_pdata); }

Contributors

PersonTokensPropCommitsCommitProp
Yoichi Yuasa1990.48%150.00%
Uwe Kleine-König29.52%150.00%
Total21100.00%2100.00%

#else
static inline void kzm_init_imx_uart(void) { }

Contributors

PersonTokensPropCommitsCommitProp
Yoichi Yuasa8100.00%1100.00%
Total8100.00%1100.00%

#endif static int kzm_pins[] __initdata = { MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, MX31_PIN_DCD_DCE1__DCD_DCE1, MX31_PIN_RI_DCE1__RI_DCE1, MX31_PIN_DSR_DCE1__DSR_DCE1, MX31_PIN_DTR_DCE1__DTR_DCE1, MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2, MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2, MX31_PIN_DCD_DTE1__DCD_DTE2, MX31_PIN_RI_DTE1__RI_DTE2, MX31_PIN_DSR_DTE1__DSR_DTE2, MX31_PIN_DTR_DTE1__DTR_DTE2, }; /* * Board specific initialization. */
static void __init kzm_board_init(void) { imx31_soc_init(); mxc_iomux_setup_multiple_pins(kzm_pins, ARRAY_SIZE(kzm_pins), "kzm"); kzm_init_imx_uart(); pr_info("Clock input source is 26MHz\n"); }

Contributors

PersonTokensPropCommitsCommitProp
Yoichi Yuasa2990.62%150.00%
Shawn Guo39.38%150.00%
Total32100.00%2100.00%


static void __init kzm_late_init(void) { kzm_init_ext_uart(); kzm_init_smsc9118(); }

Contributors

PersonTokensPropCommitsCommitProp
Vladimir Zapolskiy15100.00%1100.00%
Total15100.00%1100.00%

/* * This structure defines static mappings for the kzm-arm11-01 board. */ static struct map_desc kzm_io_desc[] __initdata = { { .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), .length = MX31_CS4_SIZE, .type = MT_DEVICE }, { .virtual = (unsigned long)MX31_CS5_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), .length = MX31_CS5_SIZE, .type = MT_DEVICE }, }; /* * Set up static virtual mappings. */
static void __init kzm_map_io(void) { mx31_map_io(); iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc)); }

Contributors

PersonTokensPropCommitsCommitProp
Yoichi Yuasa22100.00%1100.00%
Total22100.00%1100.00%


static void __init kzm_timer_init(void) { mx31_clocks_init(26000000); }

Contributors

PersonTokensPropCommitsCommitProp
Yoichi Yuasa14100.00%1100.00%
Total14100.00%1100.00%

MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01") .atag_offset = 0x100, .map_io = kzm_map_io, .init_early = imx31_init_early, .init_irq = mx31_init_irq, .init_time = kzm_timer_init, .init_machine = kzm_board_init, .init_late = kzm_late_init, .restart = mxc_restart, MACHINE_END

Overall Contributors

PersonTokensPropCommitsCommitProp
Yoichi Yuasa67574.01%15.00%
Shawn Guo859.32%420.00%
Uwe Kleine-König707.68%735.00%
Fabio Estevam404.39%15.00%
Vladimir Zapolskiy202.19%15.00%
Arnd Bergmann80.88%15.00%
Russell King80.88%210.00%
Javier Martinez Canillas30.33%15.00%
Stephen Warren20.22%15.00%
Nico Pitre10.11%15.00%
Total912100.00%20100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.