cregit-Linux how code gets into the kernel

Release 4.17 arch/arm/mach-imx/mach-pca100.c

/*
 * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
 * Copyright (C) 2009 Sascha Hauer (kernel@pengutronix.de)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
 * MA 02110-1301, USA.
 */

#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/platform_data/at24.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>

#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <asm/mach/time.h>

#include "common.h"
#include "devices-imx27.h"
#include "ehci.h"
#include "hardware.h"
#include "iomux-mx27.h"
#include "ulpi.h"


#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)

#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)

#define SPI1_SS0 (GPIO_PORTD + 28)

#define SPI1_SS1 (GPIO_PORTD + 27)

#define SD2_CD (GPIO_PORTC + 29)


static const int pca100_pins[] __initconst = {
	/* UART1 */
	PE12_PF_UART1_TXD,
	PE13_PF_UART1_RXD,
	PE14_PF_UART1_CTS,
	PE15_PF_UART1_RTS,
	/* SDHC */
	PB4_PF_SD2_D0,
	PB5_PF_SD2_D1,
	PB6_PF_SD2_D2,
	PB7_PF_SD2_D3,
	PB8_PF_SD2_CMD,
	PB9_PF_SD2_CLK,
	SD2_CD | GPIO_GPIO | GPIO_IN,
	/* FEC */
	PD0_AIN_FEC_TXD0,
	PD1_AIN_FEC_TXD1,
	PD2_AIN_FEC_TXD2,
	PD3_AIN_FEC_TXD3,
	PD4_AOUT_FEC_RX_ER,
	PD5_AOUT_FEC_RXD1,
	PD6_AOUT_FEC_RXD2,
	PD7_AOUT_FEC_RXD3,
	PD8_AF_FEC_MDIO,
	PD9_AIN_FEC_MDC,
	PD10_AOUT_FEC_CRS,
	PD11_AOUT_FEC_TX_CLK,
	PD12_AOUT_FEC_RXD0,
	PD13_AOUT_FEC_RX_DV,
	PD14_AOUT_FEC_RX_CLK,
	PD15_AOUT_FEC_COL,
	PD16_AIN_FEC_TX_ER,
	PF23_AIN_FEC_TX_EN,
	/* SSI1 */
	PC20_PF_SSI1_FS,
	PC21_PF_SSI1_RXD,
	PC22_PF_SSI1_TXD,
	PC23_PF_SSI1_CLK,
	/* onboard I2C */
	PC5_PF_I2C2_SDA,
	PC6_PF_I2C2_SCL,
	/* external I2C */
	PD17_PF_I2C_DATA,
	PD18_PF_I2C_CLK,
	/* SPI1 */
	PD25_PF_CSPI1_RDY,
	PD29_PF_CSPI1_SCLK,
	PD30_PF_CSPI1_MISO,
	PD31_PF_CSPI1_MOSI,
	/* OTG */
	OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
	PC7_PF_USBOTG_DATA5,
	PC8_PF_USBOTG_DATA6,
	PC9_PF_USBOTG_DATA0,
	PC10_PF_USBOTG_DATA2,
	PC11_PF_USBOTG_DATA1,
	PC12_PF_USBOTG_DATA4,
	PC13_PF_USBOTG_DATA3,
	PE0_PF_USBOTG_NXT,
	PE1_PF_USBOTG_STP,
	PE2_PF_USBOTG_DIR,
	PE24_PF_USBOTG_CLK,
	PE25_PF_USBOTG_DATA7,
	/* USBH2 */
	USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
	PA0_PF_USBH2_CLK,
	PA1_PF_USBH2_DIR,
	PA2_PF_USBH2_DATA7,
	PA3_PF_USBH2_NXT,
	PA4_PF_USBH2_STP,
	PD19_AF_USBH2_DATA4,
	PD20_AF_USBH2_DATA3,
	PD21_AF_USBH2_DATA6,
	PD22_AF_USBH2_DATA0,
	PD23_AF_USBH2_DATA2,
	PD24_AF_USBH2_DATA1,
	PD26_AF_USBH2_DATA5,
	/* display */
	PA5_PF_LSCLK,
	PA6_PF_LD0,
	PA7_PF_LD1,
	PA8_PF_LD2,
	PA9_PF_LD3,
	PA10_PF_LD4,
	PA11_PF_LD5,
	PA12_PF_LD6,
	PA13_PF_LD7,
	PA14_PF_LD8,
	PA15_PF_LD9,
	PA16_PF_LD10,
	PA17_PF_LD11,
	PA18_PF_LD12,
	PA19_PF_LD13,
	PA20_PF_LD14,
	PA21_PF_LD15,
	PA22_PF_LD16,
	PA23_PF_LD17,
	PA26_PF_PS,
	PA28_PF_HSYNC,
	PA29_PF_VSYNC,
	PA31_PF_OE_ACD,
	/* free GPIO */
	GPIO_PORTC | 31 | GPIO_GPIO | GPIO_IN, /* GPIO0_IRQ */
	GPIO_PORTC | 25 | GPIO_GPIO | GPIO_IN, /* GPIO1_IRQ */
	GPIO_PORTE | 5 | GPIO_GPIO | GPIO_IN, /* GPIO2_IRQ */
};


static const struct imxuart_platform_data uart_pdata __initconst = {
	.flags = IMXUART_HAVE_RTSCTS,
};

static const struct mxc_nand_platform_data

pca100_nand_board_info __initconst = {
	.width = 1,
	.hw_ecc = 1,
};


static const struct imxi2c_platform_data pca100_i2c1_data __initconst = {
	.bitrate = 100000,
};


static struct at24_platform_data board_eeprom = {
	.byte_len = 4096,
	.page_size = 32,
	.flags = AT24_FLAG_ADDR16,
};


static struct i2c_board_info pca100_i2c_devices[] = {
	{
		I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
		.platform_data = &board_eeprom,
        }, {
		I2C_BOARD_INFO("pcf8563", 0x51),
        }, {
		I2C_BOARD_INFO("lm75", 0x4a),
        }
};


static struct spi_eeprom at25320 = {
	.name		= "at25320an",
	.byte_len	= 4096,
	.page_size	= 32,
	.flags		= EE_ADDR2,
};


static struct spi_board_info pca100_spi_board_info[] __initdata = {
	{
		.modalias = "at25",
		.max_speed_hz = 30000,
		.bus_num = 0,
		.chip_select = 1,
		.platform_data = &at25320,
        },
};


static int pca100_spi_cs[] = {SPI1_SS0, SPI1_SS1};


static const struct spi_imx_master pca100_spi0_data __initconst = {
	.chipselect	= pca100_spi_cs,
	.num_chipselect = ARRAY_SIZE(pca100_spi_cs),
};


static void pca100_ac97_warm_reset(struct snd_ac97 *ac97) { mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); gpio_set_value(GPIO_PORTC + 20, 1); udelay(2); gpio_set_value(GPIO_PORTC + 20, 0); mxc_gpio_mode(PC20_PF_SSI1_FS); msleep(2); }

Contributors

PersonTokensPropCommitsCommitProp
Sascha Hauer55100.00%1100.00%
Total55100.00%1100.00%


static void pca100_ac97_cold_reset(struct snd_ac97 *ac97) { mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */ gpio_set_value(GPIO_PORTC + 20, 0); mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT); /* TX */ gpio_set_value(GPIO_PORTC + 22, 0); mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT); /* reset */ gpio_set_value(GPIO_PORTC + 28, 0); udelay(10); gpio_set_value(GPIO_PORTC + 28, 1); mxc_gpio_mode(PC20_PF_SSI1_FS); mxc_gpio_mode(PC22_PF_SSI1_TXD); msleep(2); }

Contributors

PersonTokensPropCommitsCommitProp
Sascha Hauer103100.00%1100.00%
Total103100.00%1100.00%

static const struct imx_ssi_platform_data pca100_ssi_pdata __initconst = { .ac97_reset = pca100_ac97_cold_reset, .ac97_warm_reset = pca100_ac97_warm_reset, .flags = IMX_SSI_USE_AC97, };
static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data) { int ret; ret = request_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), detect_irq, IRQF_TRIGGER_FALLING, "imx-mmc-detect", data); if (ret) printk(KERN_ERR "pca100: Failed to request irq for sd/mmc detection\n"); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
Luotao Fu5189.47%133.33%
Shawn Guo58.77%133.33%
Masanari Iida11.75%133.33%
Total57100.00%3100.00%


static void pca100_sdhc2_exit(struct device *dev, void *data) { free_irq(gpio_to_irq(IMX_GPIO_NR(3, 29)), data); }

Contributors

PersonTokensPropCommitsCommitProp
Luotao Fu2583.33%150.00%
Shawn Guo516.67%150.00%
Total30100.00%2100.00%

static const struct imxmmc_platform_data sdhc_pdata __initconst = { .init = pca100_sdhc2_init, .exit = pca100_sdhc2_exit, };
static int otg_phy_init(struct platform_device *pdev) { gpio_set_value(OTG_PHY_CS_GPIO, 0); mdelay(10); return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); }

Contributors

PersonTokensPropCommitsCommitProp
Sascha Hauer33100.00%2100.00%
Total33100.00%2100.00%

static struct mxc_usbh_platform_data otg_pdata __initdata = { .init = otg_phy_init, .portsc = MXC_EHCI_MODE_ULPI, };
static int usbh2_phy_init(struct platform_device *pdev) { gpio_set_value(USBH2_PHY_CS_GPIO, 0); mdelay(10); return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI); }

Contributors

PersonTokensPropCommitsCommitProp
Sascha Hauer33100.00%2100.00%
Total33100.00%2100.00%

static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .init = usbh2_phy_init, .portsc = MXC_EHCI_MODE_ULPI, }; static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .operating_mode = FSL_USB2_DR_DEVICE, .phy_mode = FSL_USB2_PHY_ULPI, }; static bool otg_mode_host __initdata;
static int __init pca100_otg_mode(char *options) { if (!strcmp(options, "host")) otg_mode_host = true; else if (!strcmp(options, "device")) otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); return 1; }

Contributors

PersonTokensPropCommitsCommitProp
Sascha Hauer4794.00%150.00%
Benoît Thébaudeau36.00%150.00%
Total50100.00%2100.00%

__setup("otg_mode=", pca100_otg_mode); /* framebuffer info */ static struct imx_fb_videomode pca100_fb_modes[] = { { .mode = { .name = "EMERGING-ETV570G0DHU", .refresh = 60, .xres = 640, .yres = 480, .pixclock = 39722, /* in ps (25.175 MHz) */ .hsync_len = 30, .left_margin = 114, .right_margin = 16, .vsync_len = 3, .upper_margin = 32, .lower_margin = 0, }, /* * TFT * Pixel pol active high * HSYNC active low * VSYNC active low * use HSYNC for ACD count * line clock disable while idle * always enable line clock even if no data */ .pcr = 0xf0c08080, .bpp = 16, }, }; static const struct imx_fb_platform_data pca100_fb_data __initconst = { .mode = pca100_fb_modes, .num_modes = ARRAY_SIZE(pca100_fb_modes), .pwmr = 0x00A903FF, .lscr1 = 0x00120300, .dmacr = 0x00020010, };
static void __init pca100_init(void) { int ret; imx27_soc_init(); ret = mxc_gpio_setup_multiple_pins(pca100_pins, ARRAY_SIZE(pca100_pins), "PCA100"); if (ret) printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret); imx27_add_imx_uart0(&uart_pdata); imx27_add_mxc_nand(&pca100_nand_board_info); /* only the i2c master 1 is used on this CPU card */ i2c_register_board_info(1, pca100_i2c_devices, ARRAY_SIZE(pca100_i2c_devices)); imx27_add_imx_i2c(1, &pca100_i2c1_data); mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_IN); mxc_gpio_mode(GPIO_PORTD | 27 | GPIO_GPIO | GPIO_IN); spi_register_board_info(pca100_spi_board_info, ARRAY_SIZE(pca100_spi_board_info)); imx27_add_spi_imx0(&pca100_spi0_data); imx27_add_imx_fb(&pca100_fb_data); imx27_add_fec(NULL); imx27_add_imx2_wdt(); imx27_add_mxc_w1(); }

Contributors

PersonTokensPropCommitsCommitProp
Luotao Fu9875.97%218.18%
Vladimir Zapolskiy1813.95%19.09%
Uwe Kleine-König86.20%654.55%
Shawn Guo32.33%19.09%
Sascha Hauer21.55%19.09%
Total129100.00%11100.00%


static void __init pca100_late_init(void) { imx27_add_imx_ssi(0, &pca100_ssi_pdata); imx27_add_mxc_mmc(1, &sdhc_pdata); gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs"); gpio_direction_output(OTG_PHY_CS_GPIO, 1); gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs"); gpio_direction_output(USBH2_PHY_CS_GPIO, 1); if (otg_mode_host) { otg_pdata.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); if (otg_pdata.otg) imx27_add_mxc_ehci_otg(&otg_pdata); } else { gpio_set_value(OTG_PHY_CS_GPIO, 0); imx27_add_fsl_usb2_udc(&otg_device_pdata); } usbh2_pdata.otg = imx_otg_ulpi_create( ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); if (usbh2_pdata.otg) imx27_add_mxc_ehci_hs(2, &usbh2_pdata); }

Contributors

PersonTokensPropCommitsCommitProp
Sascha Hauer9274.80%228.57%
Vladimir Zapolskiy2419.51%114.29%
Uwe Kleine-König54.07%228.57%
Markus Pargmann10.81%114.29%
Luotao Fu10.81%114.29%
Total123100.00%7100.00%


static void __init pca100_timer_init(void) { mx27_clocks_init(26000000); }

Contributors

PersonTokensPropCommitsCommitProp
Luotao Fu14100.00%1100.00%
Total14100.00%1100.00%

MACHINE_START(PCA100, "phyCARD-i.MX27") .atag_offset = 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, .init_irq = mx27_init_irq, .init_machine = pca100_init, .init_late = pca100_late_init, .init_time = pca100_timer_init, .restart = mxc_restart, MACHINE_END

Overall Contributors

PersonTokensPropCommitsCommitProp
Luotao Fu77854.18%38.33%
Sascha Hauer53036.91%513.89%
Vladimir Zapolskiy473.27%12.78%
Uwe Kleine-König432.99%1541.67%
Shawn Guo221.53%513.89%
Russell King50.35%12.78%
Benoît Thébaudeau50.35%12.78%
Stephen Warren20.14%12.78%
Masanari Iida10.07%12.78%
Nico Pitre10.07%12.78%
Vivien Didelot10.07%12.78%
Markus Pargmann10.07%12.78%
Total1436100.00%36100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with cregit.