Release 4.18 drivers/regulator/sy8106a-regulator.c

// SPDX-License-Identifier: GPL-2.0+
//
// sy8106a-regulator.c - Regulator device driver for SY8106A
//
// Copyright (C) 2016 Ondřej Jirman <megous@megous.com>
// Copyright (c) 2017-2018 Icenowy Zheng <icenowy@aosc.io>

#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>


#define SY8106A_REG_VOUT1_SEL		0x01

#define SY8106A_REG_VOUT_COM		0x02

#define SY8106A_REG_VOUT1_SEL_MASK	0x7f

#define SY8106A_DISABLE_REG		BIT(0)
/*
 * The I2C controlled voltage will only work when this bit is set; otherwise
 * it will behave like a fixed regulator.
 */

#define SY8106A_GO_BIT			BIT(7)


struct sy8106a {
	
struct regulator_dev *rdev;
	
struct regmap *regmap;
	
u32 fixed_voltage;
};


static const struct regmap_config sy8106a_regmap_config = {
	.reg_bits = 8,
	.val_bits = 8,
};


static const struct regulator_ops sy8106a_ops = {
	.set_voltage_sel = regulator_set_voltage_sel_regmap,
	.set_voltage_time_sel = regulator_set_voltage_time_sel,
	.get_voltage_sel = regulator_get_voltage_sel_regmap,
	.list_voltage = regulator_list_voltage_linear,
	/* Enabling/disabling the regulator is not yet implemented */
};

/* Default limits measured in millivolts */

#define SY8106A_MIN_MV		680

#define SY8106A_MAX_MV		1950

#define SY8106A_STEP_MV		10


static const struct regulator_desc sy8106a_reg = {
	.name = "SY8106A",
	.id = 0,
	.ops = &sy8106a_ops,
	.type = REGULATOR_VOLTAGE,
	.n_voltages = ((SY8106A_MAX_MV - SY8106A_MIN_MV) / SY8106A_STEP_MV) + 1,
	.min_uV = (SY8106A_MIN_MV * 1000),
	.uV_step = (SY8106A_STEP_MV * 1000),
	.vsel_reg = SY8106A_REG_VOUT1_SEL,
	.vsel_mask = SY8106A_REG_VOUT1_SEL_MASK,
	/*
         * This ramp_delay is a conservative default value which works on
         * H3/H5 boards VDD-CPUX situations.
         */
	.ramp_delay = 200,
	.owner = THIS_MODULE,
};

/*
 * I2C driver interface functions
 */


static int sy8106a_i2c_probe(struct i2c_client *i2c,
			    const struct i2c_device_id *id)
{
	struct sy8106a *chip;
	struct device *dev = &i2c->dev;
	struct regulator_dev *rdev = NULL;
	struct regulator_config config = { };
	unsigned int reg, vsel;
	int error;

	chip = devm_kzalloc(&i2c->dev, sizeof(struct sy8106a), GFP_KERNEL);
	if (!chip)
		return -ENOMEM;

	error = of_property_read_u32(dev->of_node, "silergy,fixed-microvolt",
				     &chip->fixed_voltage);
	if (error)
		return error;

	if (chip->fixed_voltage < SY8106A_MIN_MV * 1000 ||
	    chip->fixed_voltage > SY8106A_MAX_MV * 1000)
		return -EINVAL;

	chip->regmap = devm_regmap_init_i2c(i2c, &sy8106a_regmap_config);
	if (IS_ERR(chip->regmap)) {
		error = PTR_ERR(chip->regmap);
		dev_err(dev, "Failed to allocate register map: %d\n", error);
		return error;
	}

	config.dev = &i2c->dev;
	config.regmap = chip->regmap;
	config.driver_data = chip;

	config.of_node = dev->of_node;
	config.init_data = of_get_regulator_init_data(dev, dev->of_node,
						      &sy8106a_reg);

	if (!config.init_data)
		return -ENOMEM;

	/* Ensure GO_BIT is enabled when probing */
	error = regmap_read(chip->regmap, SY8106A_REG_VOUT1_SEL, &reg);
	if (error)
		return error;

	if (!(reg & SY8106A_GO_BIT)) {
		vsel = (chip->fixed_voltage / 1000 - SY8106A_MIN_MV) /
		       SY8106A_STEP_MV;

		error = regmap_write(chip->regmap, SY8106A_REG_VOUT1_SEL,
				     vsel | SY8106A_GO_BIT);
		if (error)
			return error;
	}

	/* Probe regulator */
	rdev = devm_regulator_register(&i2c->dev, &sy8106a_reg, &config);
	if (IS_ERR(rdev)) {
		error = PTR_ERR(rdev);
		dev_err(&i2c->dev, "Failed to register SY8106A regulator: %d\n", error);
		return error;
	}

	chip->rdev = rdev;

	i2c_set_clientdata(i2c, chip);

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
Ondrej Jirman
361
100.00%
1
100.00%
Total
361
100.00%
1
100.00%


static const struct of_device_id sy8106a_i2c_of_match[] = {
	{ .compatible = "silergy,sy8106a" },
	{ },
};
MODULE_DEVICE_TABLE(of, sy8106a_i2c_of_match);


static const struct i2c_device_id sy8106a_i2c_id[] = {
	{ "sy8106a", 0 },
	{ },
};
MODULE_DEVICE_TABLE(i2c, sy8106a_i2c_id);


static struct i2c_driver sy8106a_regulator_driver = {
	.driver = {
		.name = "sy8106a",
		.of_match_table	= of_match_ptr(sy8106a_i2c_of_match),
        },
	.probe = sy8106a_i2c_probe,
	.id_table = sy8106a_i2c_id,
};

module_i2c_driver(sy8106a_regulator_driver);

MODULE_AUTHOR("Ondřej Jirman <megous@megous.com>");
MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
MODULE_DESCRIPTION("Regulator device driver for Silergy SY8106A");
MODULE_LICENSE("GPL");
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
Ondrej Jirman
678
100.00%
1
100.00%
Total
678
100.00%
1
100.00%
Directory: drivers/regulator

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.