| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Paul Mackerras | 526 | 44.02% | 2 | 5.00% |
| Roy Zang | 268 | 22.43% | 1 | 2.50% |
| Benjamin Herrenschmidt | 95 | 7.95% | 6 | 15.00% |
| Olof Johansson | 95 | 7.95% | 4 | 10.00% |
| Varun Sethi | 47 | 3.93% | 2 | 5.00% |
| Johannes Berg | 28 | 2.34% | 1 | 2.50% |
| Kumar Gala | 24 | 2.01% | 2 | 5.00% |
| Christophe Leroy | 19 | 1.59% | 1 | 2.50% |
| Michael Ellerman | 18 | 1.51% | 3 | 7.50% |
| Kyle Moffett | 13 | 1.09% | 4 | 10.00% |
| Lennert Buytenhek | 12 | 1.00% | 1 | 2.50% |
| Scott Wood | 10 | 0.84% | 2 | 5.00% |
| Stephen Rothwell | 10 | 0.84% | 2 | 5.00% |
| Jia Hongtao | 8 | 0.67% | 1 | 2.50% |
| Arnd Bergmann | 6 | 0.50% | 1 | 2.50% |
| Dongsheng Wang | 5 | 0.42% | 1 | 2.50% |
| Meador Inge | 4 | 0.33% | 1 | 2.50% |
| Segher Boessenkool | 3 | 0.25% | 1 | 2.50% |
| Thomas Gleixner | 1 | 0.08% | 1 | 2.50% |
| Olaf Hering | 1 | 0.08% | 1 | 2.50% |
| Grant C. Likely | 1 | 0.08% | 1 | 2.50% |
| Greg Kroah-Hartman | 1 | 0.08% | 1 | 2.50% |
| Total | 1195 | 40 |
/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_POWERPC_MPIC_H #define _ASM_POWERPC_MPIC_H #ifdef __KERNEL__ #include <linux/irq.h> #include <asm/dcr.h> #include <asm/msi_bitmap.h> /* * Global registers */ #define MPIC_GREG_BASE 0x01000 #define MPIC_GREG_FEATURE_0 0x00000 #define MPIC_GREG_FEATURE_LAST_SRC_MASK 0x07ff0000 #define MPIC_GREG_FEATURE_LAST_SRC_SHIFT 16 #define MPIC_GREG_FEATURE_LAST_CPU_MASK 0x00001f00 #define MPIC_GREG_FEATURE_LAST_CPU_SHIFT 8 #define MPIC_GREG_FEATURE_VERSION_MASK 0xff #define MPIC_GREG_FEATURE_1 0x00010 #define MPIC_GREG_GLOBAL_CONF_0 0x00020 #define MPIC_GREG_GCONF_RESET 0x80000000 /* On the FSL mpic implementations the Mode field is expand to be * 2 bits wide: * 0b00 = pass through (interrupts routed to IRQ0) * 0b01 = Mixed mode * 0b10 = reserved * 0b11 = External proxy / coreint */ #define MPIC_GREG_GCONF_COREINT 0x60000000 #define MPIC_GREG_GCONF_8259_PTHROU_DIS 0x20000000 #define MPIC_GREG_GCONF_NO_BIAS 0x10000000 #define MPIC_GREG_GCONF_BASE_MASK 0x000fffff #define MPIC_GREG_GCONF_MCK 0x08000000 #define MPIC_GREG_GLOBAL_CONF_1 0x00030 #define MPIC_GREG_VENDOR_0 0x00040 #define MPIC_GREG_VENDOR_1 0x00050 #define MPIC_GREG_VENDOR_2 0x00060 #define MPIC_GREG_VENDOR_3 0x00070 #define MPIC_GREG_VENDOR_ID 0x00080 #define MPIC_GREG_VENDOR_ID_STEPPING_MASK 0x00ff0000 #define MPIC_GREG_VENDOR_ID_STEPPING_SHIFT 16 #define MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK 0x0000ff00 #define MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT 8 #define MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK 0x000000ff #define MPIC_GREG_PROCESSOR_INIT 0x00090 #define MPIC_GREG_IPI_VECTOR_PRI_0 0x000a0 #define MPIC_GREG_IPI_VECTOR_PRI_1 0x000b0 #define MPIC_GREG_IPI_VECTOR_PRI_2 0x000c0 #define MPIC_GREG_IPI_VECTOR_PRI_3 0x000d0 #define MPIC_GREG_IPI_STRIDE 0x10 #define MPIC_GREG_SPURIOUS 0x000e0 #define MPIC_GREG_TIMER_FREQ 0x000f0 /* * * Timer registers */ #define MPIC_TIMER_BASE 0x01100 #define MPIC_TIMER_STRIDE 0x40 #define MPIC_TIMER_GROUP_STRIDE 0x1000 #define MPIC_TIMER_CURRENT_CNT 0x00000 #define MPIC_TIMER_BASE_CNT 0x00010 #define MPIC_TIMER_VECTOR_PRI 0x00020 #define MPIC_TIMER_DESTINATION 0x00030 /* * Per-Processor registers */ #define MPIC_CPU_THISBASE 0x00000 #define MPIC_CPU_BASE 0x20000 #define MPIC_CPU_STRIDE 0x01000 #define MPIC_CPU_IPI_DISPATCH_0 0x00040 #define MPIC_CPU_IPI_DISPATCH_1 0x00050 #define MPIC_CPU_IPI_DISPATCH_2 0x00060 #define MPIC_CPU_IPI_DISPATCH_3 0x00070 #define MPIC_CPU_IPI_DISPATCH_STRIDE 0x00010 #define MPIC_CPU_CURRENT_TASK_PRI 0x00080 #define MPIC_CPU_TASKPRI_MASK 0x0000000f #define MPIC_CPU_WHOAMI 0x00090 #define MPIC_CPU_WHOAMI_MASK 0x0000001f #define MPIC_CPU_INTACK 0x000a0 #define MPIC_CPU_EOI 0x000b0 #define MPIC_CPU_MCACK 0x000c0 /* * Per-source registers */ #define MPIC_IRQ_BASE 0x10000 #define MPIC_IRQ_STRIDE 0x00020 #define MPIC_IRQ_VECTOR_PRI 0x00000 #define MPIC_VECPRI_MASK 0x80000000 #define MPIC_VECPRI_ACTIVITY 0x40000000 /* Read Only */ #define MPIC_VECPRI_PRIORITY_MASK 0x000f0000 #define MPIC_VECPRI_PRIORITY_SHIFT 16 #define MPIC_VECPRI_VECTOR_MASK 0x000007ff #define MPIC_VECPRI_POLARITY_POSITIVE 0x00800000 #define MPIC_VECPRI_POLARITY_NEGATIVE 0x00000000 #define MPIC_VECPRI_POLARITY_MASK 0x00800000 #define MPIC_VECPRI_SENSE_LEVEL 0x00400000 #define MPIC_VECPRI_SENSE_EDGE 0x00000000 #define MPIC_VECPRI_SENSE_MASK 0x00400000 #define MPIC_IRQ_DESTINATION 0x00010 #define MPIC_FSL_BRR1 0x00000 #define MPIC_FSL_BRR1_VER 0x0000ffff #define MPIC_MAX_IRQ_SOURCES 2048 #define MPIC_MAX_CPUS 32 #define MPIC_MAX_ISU 32 #define MPIC_MAX_ERR 32 #define MPIC_FSL_ERR_INT 16 /* * Tsi108 implementation of MPIC has many differences from the original one */ /* * Global registers */ #define TSI108_GREG_BASE 0x00000 #define TSI108_GREG_FEATURE_0 0x00000 #define TSI108_GREG_GLOBAL_CONF_0 0x00004 #define TSI108_GREG_VENDOR_ID 0x0000c #define TSI108_GREG_IPI_VECTOR_PRI_0 0x00204 /* Doorbell 0 */ #define TSI108_GREG_IPI_STRIDE 0x0c #define TSI108_GREG_SPURIOUS 0x00010 #define TSI108_GREG_TIMER_FREQ 0x00014 /* * Timer registers */ #define TSI108_TIMER_BASE 0x0030 #define TSI108_TIMER_STRIDE 0x10 #define TSI108_TIMER_CURRENT_CNT 0x00000 #define TSI108_TIMER_BASE_CNT 0x00004 #define TSI108_TIMER_VECTOR_PRI 0x00008 #define TSI108_TIMER_DESTINATION 0x0000c /* * Per-Processor registers */ #define TSI108_CPU_BASE 0x00300 #define TSI108_CPU_STRIDE 0x00040 #define TSI108_CPU_IPI_DISPATCH_0 0x00200 #define TSI108_CPU_IPI_DISPATCH_STRIDE 0x00000 #define TSI108_CPU_CURRENT_TASK_PRI 0x00000 #define TSI108_CPU_WHOAMI 0xffffffff #define TSI108_CPU_INTACK 0x00004 #define TSI108_CPU_EOI 0x00008 #define TSI108_CPU_MCACK 0x00004 /* Doesn't really exist here */ /* * Per-source registers */ #define TSI108_IRQ_BASE 0x00100 #define TSI108_IRQ_STRIDE 0x00008 #define TSI108_IRQ_VECTOR_PRI 0x00000 #define TSI108_VECPRI_VECTOR_MASK 0x000000ff #define TSI108_VECPRI_POLARITY_POSITIVE 0x01000000 #define TSI108_VECPRI_POLARITY_NEGATIVE 0x00000000 #define TSI108_VECPRI_SENSE_LEVEL 0x02000000 #define TSI108_VECPRI_SENSE_EDGE 0x00000000 #define TSI108_VECPRI_POLARITY_MASK 0x01000000 #define TSI108_VECPRI_SENSE_MASK 0x02000000 #define TSI108_IRQ_DESTINATION 0x00004 /* weird mpic register indices and mask bits in the HW info array */ enum { MPIC_IDX_GREG_BASE = 0, MPIC_IDX_GREG_FEATURE_0, MPIC_IDX_GREG_GLOBAL_CONF_0, MPIC_IDX_GREG_VENDOR_ID, MPIC_IDX_GREG_IPI_VECTOR_PRI_0, MPIC_IDX_GREG_IPI_STRIDE, MPIC_IDX_GREG_SPURIOUS, MPIC_IDX_GREG_TIMER_FREQ, MPIC_IDX_TIMER_BASE, MPIC_IDX_TIMER_STRIDE, MPIC_IDX_TIMER_CURRENT_CNT, MPIC_IDX_TIMER_BASE_CNT, MPIC_IDX_TIMER_VECTOR_PRI, MPIC_IDX_TIMER_DESTINATION, MPIC_IDX_CPU_BASE, MPIC_IDX_CPU_STRIDE, MPIC_IDX_CPU_IPI_DISPATCH_0, MPIC_IDX_CPU_IPI_DISPATCH_STRIDE, MPIC_IDX_CPU_CURRENT_TASK_PRI, MPIC_IDX_CPU_WHOAMI, MPIC_IDX_CPU_INTACK, MPIC_IDX_CPU_EOI, MPIC_IDX_CPU_MCACK, MPIC_IDX_IRQ_BASE, MPIC_IDX_IRQ_STRIDE, MPIC_IDX_IRQ_VECTOR_PRI, MPIC_IDX_VECPRI_VECTOR_MASK, MPIC_IDX_VECPRI_POLARITY_POSITIVE, MPIC_IDX_VECPRI_POLARITY_NEGATIVE, MPIC_IDX_VECPRI_SENSE_LEVEL, MPIC_IDX_VECPRI_SENSE_EDGE, MPIC_IDX_VECPRI_POLARITY_MASK, MPIC_IDX_VECPRI_SENSE_MASK, MPIC_IDX_IRQ_DESTINATION, MPIC_IDX_END }; #ifdef CONFIG_MPIC_U3_HT_IRQS /* Fixup table entry */ struct mpic_irq_fixup { u8 __iomem *base; u8 __iomem *applebase; u32 data; unsigned int index; }; #endif /* CONFIG_MPIC_U3_HT_IRQS */ enum mpic_reg_type { mpic_access_mmio_le, mpic_access_mmio_be, #ifdef CONFIG_PPC_DCR mpic_access_dcr #endif }; struct mpic_reg_bank { u32 __iomem *base; #ifdef CONFIG_PPC_DCR dcr_host_t dhost; #endif /* CONFIG_PPC_DCR */ }; struct mpic_irq_save { u32 vecprio, dest; #ifdef CONFIG_MPIC_U3_HT_IRQS u32 fixup_data; #endif }; /* The instance data of a given MPIC */ struct mpic { /* The OpenFirmware dt node for this MPIC */ struct device_node *node; /* The remapper for this MPIC */ struct irq_domain *irqhost; /* The "linux" controller struct */ struct irq_chip hc_irq; #ifdef CONFIG_MPIC_U3_HT_IRQS struct irq_chip hc_ht_irq; #endif #ifdef CONFIG_SMP struct irq_chip hc_ipi; #endif struct irq_chip hc_tm; struct irq_chip hc_err; const char *name; /* Flags */ unsigned int flags; /* How many irq sources in a given ISU */ unsigned int isu_size; unsigned int isu_shift; unsigned int isu_mask; /* Number of sources */ unsigned int num_sources; /* vector numbers used for internal sources (ipi/timers) */ unsigned int ipi_vecs[4]; unsigned int timer_vecs[8]; /* vector numbers used for FSL MPIC error interrupts */ unsigned int err_int_vecs[MPIC_MAX_ERR]; /* Spurious vector to program into unused sources */ unsigned int spurious_vec; #ifdef CONFIG_MPIC_U3_HT_IRQS /* The fixup table */ struct mpic_irq_fixup *fixups; raw_spinlock_t fixup_lock; #endif /* Register access method */ enum mpic_reg_type reg_type; /* The physical base address of the MPIC */ phys_addr_t paddr; /* The various ioremap'ed bases */ struct mpic_reg_bank thiscpuregs; struct mpic_reg_bank gregs; struct mpic_reg_bank tmregs; struct mpic_reg_bank cpuregs[MPIC_MAX_CPUS]; struct mpic_reg_bank isus[MPIC_MAX_ISU]; /* ioremap'ed base for error interrupt registers */ u32 __iomem *err_regs; /* Protected sources */ unsigned long *protected; #ifdef CONFIG_MPIC_WEIRD /* Pointer to HW info array */ u32 *hw_set; #endif #ifdef CONFIG_PCI_MSI struct msi_bitmap msi_bitmap; #endif #ifdef CONFIG_MPIC_BROKEN_REGREAD u32 isu_reg0_shadow[MPIC_MAX_IRQ_SOURCES]; #endif /* link */ struct mpic *next; #ifdef CONFIG_PM struct mpic_irq_save *save_data; #endif }; extern struct bus_type mpic_subsys; /* * MPIC flags (passed to mpic_alloc) * * The top 4 bits contain an MPIC bhw id that is used to index the * register offsets and some masks when CONFIG_MPIC_WEIRD is set. * Note setting any ID (leaving those bits to 0) means standard MPIC */ /* * This is a secondary ("chained") controller; it only uses the CPU0 * registers. Primary controllers have IPIs and affinity control. */ #define MPIC_SECONDARY 0x00000001 /* Set this for a big-endian MPIC */ #define MPIC_BIG_ENDIAN 0x00000002 /* Broken U3 MPIC */ #define MPIC_U3_HT_IRQS 0x00000004 /* Broken IPI registers (autodetected) */ #define MPIC_BROKEN_IPI 0x00000008 /* Spurious vector requires EOI */ #define MPIC_SPV_EOI 0x00000020 /* No passthrough disable */ #define MPIC_NO_PTHROU_DIS 0x00000040 /* DCR based MPIC */ #define MPIC_USES_DCR 0x00000080 /* MPIC has 11-bit vector fields (or larger) */ #define MPIC_LARGE_VECTORS 0x00000100 /* Enable delivery of prio 15 interrupts as MCK instead of EE */ #define MPIC_ENABLE_MCK 0x00000200 /* Disable bias among target selection, spread interrupts evenly */ #define MPIC_NO_BIAS 0x00000400 /* Destination only supports a single CPU at a time */ #define MPIC_SINGLE_DEST_CPU 0x00001000 /* Enable CoreInt delivery of interrupts */ #define MPIC_ENABLE_COREINT 0x00002000 /* Do not reset the MPIC during initialization */ #define MPIC_NO_RESET 0x00004000 /* Freescale MPIC (compatible includes "fsl,mpic") */ #define MPIC_FSL 0x00008000 /* Freescale MPIC supports EIMR (error interrupt mask register). * This flag is set for MPIC version >= 4.1 (version determined * from the BRR1 register). */ #define MPIC_FSL_HAS_EIMR 0x00010000 /* MPIC HW modification ID */ #define MPIC_REGSET_MASK 0xf0000000 #define MPIC_REGSET(val) (((val) & 0xf ) << 28) #define MPIC_GET_REGSET(flags) (((flags) >> 28) & 0xf) #define MPIC_REGSET_STANDARD MPIC_REGSET(0) /* Original MPIC */ #define MPIC_REGSET_TSI108 MPIC_REGSET(1) /* Tsi108/109 PIC */ /* Get the version of primary MPIC */ #ifdef CONFIG_MPIC extern u32 fsl_mpic_primary_get_version(void); #else static inline u32 fsl_mpic_primary_get_version(void) { return 0; } #endif /* Allocate the controller structure and setup the linux irq descs * for the range if interrupts passed in. No HW initialization is * actually performed. * * @phys_addr: physial base address of the MPIC * @flags: flags, see constants above * @isu_size: number of interrupts in an ISU. Use 0 to use a * standard ISU-less setup (aka powermac) * @irq_offset: first irq number to assign to this mpic * @irq_count: number of irqs to use with this mpic IRQ sources. Pass 0 * to match the number of sources * @ipi_offset: first irq number to assign to this mpic IPI sources, * used only on primary mpic * @senses: array of sense values * @senses_num: number of entries in the array * * Note about the sense array. If none is passed, all interrupts are * setup to be level negative unless MPIC_U3_HT_IRQS is set in which * case they are edge positive (and the array is ignored anyway). * The values in the array start at the first source of the MPIC, * that is senses[0] correspond to linux irq "irq_offset". */ extern struct mpic *mpic_alloc(struct device_node *node, phys_addr_t phys_addr, unsigned int flags, unsigned int isu_size, unsigned int irq_count, const char *name); /* Assign ISUs, to call before mpic_init() * * @mpic: controller structure as returned by mpic_alloc() * @isu_num: ISU number * @phys_addr: physical address of the ISU */ extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num, phys_addr_t phys_addr); /* Initialize the controller. After this has been called, none of the above * should be called again for this mpic */ extern void mpic_init(struct mpic *mpic); /* * All of the following functions must only be used after the * ISUs have been assigned and the controller fully initialized * with mpic_init() */ /* Change the priority of an interrupt. Default is 8 for irqs and * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the * IPI number is then the offset'ed (linux irq number mapped to the IPI) */ extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); /* Setup a non-boot CPU */ extern void mpic_setup_this_cpu(void); /* Clean up for kexec (or cpu offline or ...) */ extern void mpic_teardown_this_cpu(int secondary); /* Get the current cpu priority for this cpu (0..15) */ extern int mpic_cpu_get_priority(void); /* Set the current cpu priority for this cpu */ extern void mpic_cpu_set_priority(int prio); /* Request IPIs on primary mpic */ extern void mpic_request_ipis(void); /* Send a message (IPI) to a given target (cpu number or MSG_*) */ void smp_mpic_message_pass(int target, int msg); /* Unmask a specific virq */ extern void mpic_unmask_irq(struct irq_data *d); /* Mask a specific virq */ extern void mpic_mask_irq(struct irq_data *d); /* EOI a specific virq */ extern void mpic_end_irq(struct irq_data *d); /* Fetch interrupt from a given mpic */ extern unsigned int mpic_get_one_irq(struct mpic *mpic); /* This one gets from the primary mpic */ extern unsigned int mpic_get_irq(void); /* This one gets from the primary mpic via CoreInt*/ extern unsigned int mpic_get_coreint_irq(void); /* Fetch Machine Check interrupt from primary mpic */ extern unsigned int mpic_get_mcirq(void); #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_MPIC_H */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1