Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
Sylwester Nawrocki | 547 | 98.74% | 10 | 58.82% |
Junghak Sung | 2 | 0.36% | 2 | 11.76% |
Mauro Carvalho Chehab | 2 | 0.36% | 2 | 11.76% |
Sachin Kamat | 2 | 0.36% | 2 | 11.76% |
Hans Verkuil | 1 | 0.18% | 1 | 5.88% |
Total | 554 | 17 |
/* * Copyright (C) 2012 Samsung Electronics Co., Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #ifndef FIMC_LITE_H_ #define FIMC_LITE_H_ #include <linux/sizes.h> #include <linux/io.h> #include <linux/irqreturn.h> #include <linux/platform_device.h> #include <linux/sched.h> #include <linux/spinlock.h> #include <linux/types.h> #include <linux/videodev2.h> #include <media/media-entity.h> #include <media/videobuf2-v4l2.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-device.h> #include <media/v4l2-mediabus.h> #include <media/drv-intf/exynos-fimc.h> #define FIMC_LITE_DRV_NAME "exynos-fimc-lite" #define FLITE_CLK_NAME "flite" #define FIMC_LITE_MAX_DEVS 3 #define FLITE_REQ_BUFS_MIN 2 #define FLITE_DEFAULT_WIDTH 640 #define FLITE_DEFAULT_HEIGHT 480 /* Bit index definitions for struct fimc_lite::state */ enum { ST_FLITE_LPM, ST_FLITE_PENDING, ST_FLITE_RUN, ST_FLITE_STREAM, ST_FLITE_SUSPENDED, ST_FLITE_OFF, ST_FLITE_IN_USE, ST_FLITE_CONFIG, ST_SENSOR_STREAM, }; #define FLITE_SD_PAD_SINK 0 #define FLITE_SD_PAD_SOURCE_DMA 1 #define FLITE_SD_PAD_SOURCE_ISP 2 #define FLITE_SD_PADS_NUM 3 /** * struct flite_drvdata - FIMC-LITE IP variant data structure * @max_width: maximum camera interface input width in pixels * @max_height: maximum camera interface input height in pixels * @out_width_align: minimum output width alignment in pixels * @win_hor_offs_align: minimum camera interface crop window horizontal * offset alignment in pixels * @out_hor_offs_align: minimum output DMA compose rectangle horizontal * offset alignment in pixels * @max_dma_bufs: number of output DMA buffer start address registers * @num_instances: total number of FIMC-LITE IP instances available */ struct flite_drvdata { unsigned short max_width; unsigned short max_height; unsigned short out_width_align; unsigned short win_hor_offs_align; unsigned short out_hor_offs_align; unsigned short max_dma_bufs; unsigned short num_instances; }; struct fimc_lite_events { unsigned int data_overflow; }; #define FLITE_MAX_PLANES 1 /** * struct flite_frame - source/target frame properties * @f_width: full pixel width * @f_height: full pixel height * @rect: crop/composition rectangle * @fmt: pointer to pixel format description data structure */ struct flite_frame { u16 f_width; u16 f_height; struct v4l2_rect rect; const struct fimc_fmt *fmt; }; /** * struct flite_buffer - video buffer structure * @vb: vb2 buffer * @list: list head for the buffers queue * @paddr: DMA buffer start address * @index: DMA start address register's index */ struct flite_buffer { struct vb2_v4l2_buffer vb; struct list_head list; dma_addr_t paddr; unsigned short index; }; /** * struct fimc_lite - fimc lite structure * @pdev: pointer to FIMC-LITE platform device * @dd: SoC specific driver data structure * @ve: exynos video device entity structure * @v4l2_dev: pointer to top the level v4l2_device * @fh: v4l2 file handle * @subdev: FIMC-LITE subdev * @vd_pad: media (sink) pad for the capture video node * @subdev_pads: the subdev media pads * @sensor: sensor subdev attached to FIMC-LITE directly or through MIPI-CSIS * @ctrl_handler: v4l2 control handler * @test_pattern: test pattern controls * @index: FIMC-LITE platform device index * @pipeline: video capture pipeline data structure * @pipeline_ops: media pipeline ops for the video node driver * @slock: spinlock protecting this data structure and the hw registers * @lock: mutex serializing video device and the subdev operations * @clock: FIMC-LITE gate clock * @regs: memory mapped io registers * @irq_queue: interrupt handler waitqueue * @payload: image size in bytes (w x h x bpp) * @inp_frame: camera input frame structure * @out_frame: DMA output frame structure * @out_path: output data path (DMA or FIFO) * @source_subdev_grp_id: source subdev group id * @state: driver state flags * @pending_buf_q: pending buffers queue head * @active_buf_q: the queue head of buffers scheduled in hardware * @vb_queue: vb2 buffers queue * @buf_index: helps to keep track of the DMA start address register index * @active_buf_count: number of video buffers scheduled in hardware * @frame_count: the captured frames counter * @reqbufs_count: the number of buffers requested with REQBUFS ioctl */ struct fimc_lite { struct platform_device *pdev; struct flite_drvdata *dd; struct exynos_video_entity ve; struct v4l2_device *v4l2_dev; struct v4l2_fh fh; struct v4l2_subdev subdev; struct media_pad vd_pad; struct media_pad subdev_pads[FLITE_SD_PADS_NUM]; struct v4l2_subdev *sensor; struct v4l2_ctrl_handler ctrl_handler; struct v4l2_ctrl *test_pattern; int index; struct mutex lock; spinlock_t slock; struct clk *clock; void __iomem *regs; wait_queue_head_t irq_queue; unsigned long payload[FLITE_MAX_PLANES]; struct flite_frame inp_frame; struct flite_frame out_frame; atomic_t out_path; unsigned int source_subdev_grp_id; unsigned long state; struct list_head pending_buf_q; struct list_head active_buf_q; struct vb2_queue vb_queue; unsigned short buf_index; unsigned int frame_count; unsigned int reqbufs_count; struct fimc_lite_events events; bool streaming; }; static inline bool fimc_lite_active(struct fimc_lite *fimc) { unsigned long flags; bool ret; spin_lock_irqsave(&fimc->slock, flags); ret = fimc->state & (1 << ST_FLITE_RUN) || fimc->state & (1 << ST_FLITE_PENDING); spin_unlock_irqrestore(&fimc->slock, flags); return ret; } static inline void fimc_lite_active_queue_add(struct fimc_lite *dev, struct flite_buffer *buf) { list_add_tail(&buf->list, &dev->active_buf_q); } static inline struct flite_buffer *fimc_lite_active_queue_pop( struct fimc_lite *dev) { struct flite_buffer *buf = list_entry(dev->active_buf_q.next, struct flite_buffer, list); list_del(&buf->list); return buf; } static inline void fimc_lite_pending_queue_add(struct fimc_lite *dev, struct flite_buffer *buf) { list_add_tail(&buf->list, &dev->pending_buf_q); } static inline struct flite_buffer *fimc_lite_pending_queue_pop( struct fimc_lite *dev) { struct flite_buffer *buf = list_entry(dev->pending_buf_q.next, struct flite_buffer, list); list_del(&buf->list); return buf; } #endif /* FIMC_LITE_H_ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1