Author | Tokens | Token Proportion | Commits | Commit Proportion |
---|---|---|---|---|
David Daney | 772 | 96.98% | 1 | 12.50% |
Peter Korsgaard | 7 | 0.88% | 2 | 25.00% |
Christian Hohnstaedt | 6 | 0.75% | 1 | 12.50% |
Andrew Lunn | 5 | 0.63% | 2 | 25.00% |
Peter Hüwe | 5 | 0.63% | 1 | 12.50% |
Johan Hovold | 1 | 0.13% | 1 | 12.50% |
Total | 796 | 8 |
/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 2011 - 2012 Cavium, Inc. */ #include <linux/module.h> #include <linux/phy.h> #include <linux/of.h> #define PHY_ID_BCM8706 0x0143bdc1 #define PHY_ID_BCM8727 0x0143bff0 #define BCM87XX_PMD_RX_SIGNAL_DETECT (MII_ADDR_C45 | 0x1000a) #define BCM87XX_10GBASER_PCS_STATUS (MII_ADDR_C45 | 0x30020) #define BCM87XX_XGXS_LANE_STATUS (MII_ADDR_C45 | 0x40018) #define BCM87XX_LASI_CONTROL (MII_ADDR_C45 | 0x39002) #define BCM87XX_LASI_STATUS (MII_ADDR_C45 | 0x39005) #if IS_ENABLED(CONFIG_OF_MDIO) /* Set and/or override some configuration registers based on the * broadcom,c45-reg-init property stored in the of_node for the phydev. * * broadcom,c45-reg-init = <devid reg mask value>,...; * * There may be one or more sets of <devid reg mask value>: * * devid: which sub-device to use. * reg: the register. * mask: if non-zero, ANDed with existing register value. * value: ORed with the masked value and written to the regiser. * */ static int bcm87xx_of_reg_init(struct phy_device *phydev) { const __be32 *paddr; const __be32 *paddr_end; int len, ret; if (!phydev->mdio.dev.of_node) return 0; paddr = of_get_property(phydev->mdio.dev.of_node, "broadcom,c45-reg-init", &len); if (!paddr) return 0; paddr_end = paddr + (len /= sizeof(*paddr)); ret = 0; while (paddr + 3 < paddr_end) { u16 devid = be32_to_cpup(paddr++); u16 reg = be32_to_cpup(paddr++); u16 mask = be32_to_cpup(paddr++); u16 val_bits = be32_to_cpup(paddr++); int val; u32 regnum = MII_ADDR_C45 | (devid << 16) | reg; val = 0; if (mask) { val = phy_read(phydev, regnum); if (val < 0) { ret = val; goto err; } val &= mask; } val |= val_bits; ret = phy_write(phydev, regnum, val); if (ret < 0) goto err; } err: return ret; } #else static int bcm87xx_of_reg_init(struct phy_device *phydev) { return 0; } #endif /* CONFIG_OF_MDIO */ static int bcm87xx_config_init(struct phy_device *phydev) { phydev->supported = SUPPORTED_10000baseR_FEC; phydev->advertising = ADVERTISED_10000baseR_FEC; phydev->state = PHY_NOLINK; phydev->autoneg = AUTONEG_DISABLE; bcm87xx_of_reg_init(phydev); return 0; } static int bcm87xx_config_aneg(struct phy_device *phydev) { return -EINVAL; } static int bcm87xx_read_status(struct phy_device *phydev) { int rx_signal_detect; int pcs_status; int xgxs_lane_status; rx_signal_detect = phy_read(phydev, BCM87XX_PMD_RX_SIGNAL_DETECT); if (rx_signal_detect < 0) return rx_signal_detect; if ((rx_signal_detect & 1) == 0) goto no_link; pcs_status = phy_read(phydev, BCM87XX_10GBASER_PCS_STATUS); if (pcs_status < 0) return pcs_status; if ((pcs_status & 1) == 0) goto no_link; xgxs_lane_status = phy_read(phydev, BCM87XX_XGXS_LANE_STATUS); if (xgxs_lane_status < 0) return xgxs_lane_status; if ((xgxs_lane_status & 0x1000) == 0) goto no_link; phydev->speed = 10000; phydev->link = 1; phydev->duplex = 1; return 0; no_link: phydev->link = 0; return 0; } static int bcm87xx_config_intr(struct phy_device *phydev) { int reg, err; reg = phy_read(phydev, BCM87XX_LASI_CONTROL); if (reg < 0) return reg; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) reg |= 1; else reg &= ~1; err = phy_write(phydev, BCM87XX_LASI_CONTROL, reg); return err; } static int bcm87xx_did_interrupt(struct phy_device *phydev) { int reg; reg = phy_read(phydev, BCM87XX_LASI_STATUS); if (reg < 0) { phydev_err(phydev, "Error: Read of BCM87XX_LASI_STATUS failed: %d\n", reg); return 0; } return (reg & 1) != 0; } static int bcm87xx_ack_interrupt(struct phy_device *phydev) { /* Reading the LASI status clears it. */ bcm87xx_did_interrupt(phydev); return 0; } static int bcm8706_match_phy_device(struct phy_device *phydev) { return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8706; } static int bcm8727_match_phy_device(struct phy_device *phydev) { return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8727; } static struct phy_driver bcm87xx_driver[] = { { .phy_id = PHY_ID_BCM8706, .phy_id_mask = 0xffffffff, .name = "Broadcom BCM8706", .flags = PHY_HAS_INTERRUPT, .config_init = bcm87xx_config_init, .config_aneg = bcm87xx_config_aneg, .read_status = bcm87xx_read_status, .ack_interrupt = bcm87xx_ack_interrupt, .config_intr = bcm87xx_config_intr, .did_interrupt = bcm87xx_did_interrupt, .match_phy_device = bcm8706_match_phy_device, }, { .phy_id = PHY_ID_BCM8727, .phy_id_mask = 0xffffffff, .name = "Broadcom BCM8727", .flags = PHY_HAS_INTERRUPT, .config_init = bcm87xx_config_init, .config_aneg = bcm87xx_config_aneg, .read_status = bcm87xx_read_status, .ack_interrupt = bcm87xx_ack_interrupt, .config_intr = bcm87xx_config_intr, .did_interrupt = bcm87xx_did_interrupt, .match_phy_device = bcm8727_match_phy_device, } }; module_phy_driver(bcm87xx_driver); MODULE_LICENSE("GPL");
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1