Contributors: 17
| Author |
Tokens |
Token Proportion |
Commits |
Commit Proportion |
| Heiner Kallweit |
314 |
25.36% |
7 |
25.00% |
| Shengzhou Liu |
170 |
13.73% |
1 |
3.57% |
| Johnson Leung |
158 |
12.76% |
1 |
3.57% |
| Jassi Brar |
142 |
11.47% |
1 |
3.57% |
| Linus Walleij |
119 |
9.61% |
1 |
3.57% |
| Giuseppe Cavallaro |
106 |
8.56% |
2 |
7.14% |
| Martin Blumenstingl |
95 |
7.67% |
5 |
17.86% |
| Shaohui Xie |
53 |
4.28% |
1 |
3.57% |
| Jonas Jensen |
29 |
2.34% |
1 |
3.57% |
| David Woodhouse |
23 |
1.86% |
1 |
3.57% |
| Kevin Hao |
12 |
0.97% |
1 |
3.57% |
| Jongsung Kim |
8 |
0.65% |
1 |
3.57% |
| Paul Gortmaker |
3 |
0.24% |
1 |
3.57% |
| Kunihiko Hayashi |
2 |
0.16% |
1 |
3.57% |
| Johan Hovold |
2 |
0.16% |
1 |
3.57% |
| Uwe Kleine-König |
1 |
0.08% |
1 |
3.57% |
| Holger Hoffstätte |
1 |
0.08% |
1 |
3.57% |
| Total |
1238 |
|
28 |
|
/*
* drivers/net/phy/realtek.c
*
* Driver for Realtek PHYs
*
* Author: Johnson Leung <r58129@freescale.com>
*
* Copyright (c) 2004 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/bitops.h>
#include <linux/phy.h>
#include <linux/module.h>
#define RTL821x_PHYSR 0x11
#define RTL821x_PHYSR_DUPLEX BIT(13)
#define RTL821x_PHYSR_SPEED GENMASK(15, 14)
#define RTL821x_INER 0x12
#define RTL8211B_INER_INIT 0x6400
#define RTL8211E_INER_LINK_STATUS BIT(10)
#define RTL8211F_INER_LINK_STATUS BIT(4)
#define RTL821x_INSR 0x13
#define RTL821x_PAGE_SELECT 0x1f
#define RTL8211F_INSR 0x1d
#define RTL8211F_TX_DELAY BIT(8)
#define RTL8201F_ISR 0x1e
#define RTL8201F_IER 0x13
#define RTL8366RB_POWER_SAVE 0x15
#define RTL8366RB_POWER_SAVE_ON BIT(12)
MODULE_DESCRIPTION("Realtek PHY driver");
MODULE_AUTHOR("Johnson Leung");
MODULE_LICENSE("GPL");
static int rtl821x_read_page(struct phy_device *phydev)
{
return __phy_read(phydev, RTL821x_PAGE_SELECT);
}
static int rtl821x_write_page(struct phy_device *phydev, int page)
{
return __phy_write(phydev, RTL821x_PAGE_SELECT, page);
}
static int rtl8201_ack_interrupt(struct phy_device *phydev)
{
int err;
err = phy_read(phydev, RTL8201F_ISR);
return (err < 0) ? err : 0;
}
static int rtl821x_ack_interrupt(struct phy_device *phydev)
{
int err;
err = phy_read(phydev, RTL821x_INSR);
return (err < 0) ? err : 0;
}
static int rtl8211f_ack_interrupt(struct phy_device *phydev)
{
int err;
err = phy_read_paged(phydev, 0xa43, RTL8211F_INSR);
return (err < 0) ? err : 0;
}
static int rtl8201_config_intr(struct phy_device *phydev)
{
u16 val;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
val = BIT(13) | BIT(12) | BIT(11);
else
val = 0;
return phy_write_paged(phydev, 0x7, RTL8201F_IER, val);
}
static int rtl8211b_config_intr(struct phy_device *phydev)
{
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_write(phydev, RTL821x_INER,
RTL8211B_INER_INIT);
else
err = phy_write(phydev, RTL821x_INER, 0);
return err;
}
static int rtl8211e_config_intr(struct phy_device *phydev)
{
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_write(phydev, RTL821x_INER,
RTL8211E_INER_LINK_STATUS);
else
err = phy_write(phydev, RTL821x_INER, 0);
return err;
}
static int rtl8211f_config_intr(struct phy_device *phydev)
{
u16 val;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
val = RTL8211F_INER_LINK_STATUS;
else
val = 0;
return phy_write_paged(phydev, 0xa42, RTL821x_INER, val);
}
static int rtl8211_config_aneg(struct phy_device *phydev)
{
int ret;
ret = genphy_config_aneg(phydev);
if (ret < 0)
return ret;
/* Quirk was copied from vendor driver. Unfortunately it includes no
* description of the magic numbers.
*/
if (phydev->speed == SPEED_100 && phydev->autoneg == AUTONEG_DISABLE) {
phy_write(phydev, 0x17, 0x2138);
phy_write(phydev, 0x0e, 0x0260);
} else {
phy_write(phydev, 0x17, 0x2108);
phy_write(phydev, 0x0e, 0x0000);
}
return 0;
}
static int rtl8211c_config_init(struct phy_device *phydev)
{
/* RTL8211C has an issue when operating in Gigabit slave mode */
phy_set_bits(phydev, MII_CTRL1000,
CTL1000_ENABLE_MASTER | CTL1000_AS_MASTER);
return genphy_config_init(phydev);
}
static int rtl8211f_config_init(struct phy_device *phydev)
{
int ret;
u16 val = 0;
ret = genphy_config_init(phydev);
if (ret < 0)
return ret;
/* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
val = RTL8211F_TX_DELAY;
return phy_modify_paged(phydev, 0xd08, 0x11, RTL8211F_TX_DELAY, val);
}
static int rtl8211b_suspend(struct phy_device *phydev)
{
phy_write(phydev, MII_MMD_DATA, BIT(9));
return genphy_suspend(phydev);
}
static int rtl8211b_resume(struct phy_device *phydev)
{
phy_write(phydev, MII_MMD_DATA, 0);
return genphy_resume(phydev);
}
static int rtl8366rb_config_init(struct phy_device *phydev)
{
int ret;
ret = genphy_config_init(phydev);
if (ret < 0)
return ret;
ret = phy_set_bits(phydev, RTL8366RB_POWER_SAVE,
RTL8366RB_POWER_SAVE_ON);
if (ret) {
dev_err(&phydev->mdio.dev,
"error enabling power management\n");
}
return ret;
}
static struct phy_driver realtek_drvs[] = {
{
.phy_id = 0x00008201,
.name = "RTL8201CP Ethernet",
.phy_id_mask = 0x0000ffff,
.features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT,
}, {
.phy_id = 0x001cc816,
.name = "RTL8201F Fast Ethernet",
.phy_id_mask = 0x001fffff,
.features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.ack_interrupt = &rtl8201_ack_interrupt,
.config_intr = &rtl8201_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
.phy_id = 0x001cc910,
.name = "RTL8211 Gigabit Ethernet",
.phy_id_mask = 0x001fffff,
.features = PHY_GBIT_FEATURES,
.config_aneg = rtl8211_config_aneg,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
}, {
.phy_id = 0x001cc912,
.name = "RTL8211B Gigabit Ethernet",
.phy_id_mask = 0x001fffff,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.ack_interrupt = &rtl821x_ack_interrupt,
.config_intr = &rtl8211b_config_intr,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
.suspend = rtl8211b_suspend,
.resume = rtl8211b_resume,
}, {
.phy_id = 0x001cc913,
.name = "RTL8211C Gigabit Ethernet",
.phy_id_mask = 0x001fffff,
.features = PHY_GBIT_FEATURES,
.config_init = rtl8211c_config_init,
.read_mmd = &genphy_read_mmd_unsupported,
.write_mmd = &genphy_write_mmd_unsupported,
}, {
.phy_id = 0x001cc914,
.name = "RTL8211DN Gigabit Ethernet",
.phy_id_mask = 0x001fffff,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.ack_interrupt = rtl821x_ack_interrupt,
.config_intr = rtl8211e_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
.phy_id = 0x001cc915,
.name = "RTL8211E Gigabit Ethernet",
.phy_id_mask = 0x001fffff,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.ack_interrupt = &rtl821x_ack_interrupt,
.config_intr = &rtl8211e_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
}, {
.phy_id = 0x001cc916,
.name = "RTL8211F Gigabit Ethernet",
.phy_id_mask = 0x001fffff,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &rtl8211f_config_init,
.ack_interrupt = &rtl8211f_ack_interrupt,
.config_intr = &rtl8211f_config_intr,
.suspend = genphy_suspend,
.resume = genphy_resume,
.read_page = rtl821x_read_page,
.write_page = rtl821x_write_page,
}, {
.phy_id = 0x001cc961,
.name = "RTL8366RB Gigabit Ethernet",
.phy_id_mask = 0x001fffff,
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &rtl8366rb_config_init,
.suspend = genphy_suspend,
.resume = genphy_resume,
},
};
module_phy_driver(realtek_drvs);
static struct mdio_device_id __maybe_unused realtek_tbl[] = {
{ 0x001cc816, 0x001fffff },
{ 0x001cc910, 0x001fffff },
{ 0x001cc912, 0x001fffff },
{ 0x001cc913, 0x001fffff },
{ 0x001cc914, 0x001fffff },
{ 0x001cc915, 0x001fffff },
{ 0x001cc916, 0x001fffff },
{ 0x001cc961, 0x001fffff },
{ }
};
MODULE_DEVICE_TABLE(mdio, realtek_tbl);