| Author | Tokens | Token Proportion | Commits | Commit Proportion |
|---|---|---|---|---|
| Daniel Vetter | 315 | 26.54% | 46 | 42.99% |
| Dave Airlie | 278 | 23.42% | 3 | 2.80% |
| Rob Clark | 103 | 8.68% | 5 | 4.67% |
| Shawn Guo | 52 | 4.38% | 2 | 1.87% |
| Matt Roper | 45 | 3.79% | 3 | 2.80% |
| Kumar, Mahesh | 43 | 3.62% | 2 | 1.87% |
| Russell King | 37 | 3.12% | 2 | 1.87% |
| Tomeu Vizoso | 34 | 2.86% | 1 | 0.93% |
| Michel Dänzer | 29 | 2.44% | 1 | 0.93% |
| Chris Wilson | 26 | 2.19% | 3 | 2.80% |
| Benjamin Gaignard | 25 | 2.11% | 1 | 0.93% |
| Kristian Högsberg | 24 | 2.02% | 1 | 0.93% |
| Paulo Zanoni | 24 | 2.02% | 1 | 0.93% |
| Maarten Lankhorst | 21 | 1.77% | 7 | 6.54% |
| Gustavo Padovan | 21 | 1.77% | 1 | 0.93% |
| Lionel Landwerlin | 20 | 1.68% | 1 | 0.93% |
| Ville Syrjälä | 15 | 1.26% | 4 | 3.74% |
| Daniel Stone | 12 | 1.01% | 3 | 2.80% |
| Keith Packard | 10 | 0.84% | 2 | 1.87% |
| Boris Brezillon | 9 | 0.76% | 2 | 1.87% |
| Andrey Grodzovsky | 8 | 0.67% | 2 | 1.87% |
| Marek Szyprowski | 5 | 0.42% | 1 | 0.93% |
| Thierry Reding | 5 | 0.42% | 1 | 0.93% |
| Sean Paul | 5 | 0.42% | 2 | 1.87% |
| Jesse Barnes | 5 | 0.42% | 2 | 1.87% |
| Mario Kleiner | 4 | 0.34% | 1 | 0.93% |
| Vandana Kannan | 3 | 0.25% | 1 | 0.93% |
| David Herrmann | 2 | 0.17% | 1 | 0.93% |
| Haneen Mohammed | 2 | 0.17% | 1 | 0.93% |
| David Howells | 2 | 0.17% | 1 | 0.93% |
| Jani Nikula | 2 | 0.17% | 2 | 1.87% |
| Peter Rosin | 1 | 0.08% | 1 | 0.93% |
| Total | 1187 | 107 |
/* * Copyright © 2006 Keith Packard * Copyright © 2007-2008 Dave Airlie * Copyright © 2007-2008 Intel Corporation * Jesse Barnes <jesse.barnes@intel.com> * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #ifndef __DRM_CRTC_H__ #define __DRM_CRTC_H__ #include <linux/i2c.h> #include <linux/spinlock.h> #include <linux/types.h> #include <linux/fb.h> #include <linux/hdmi.h> #include <linux/media-bus-format.h> #include <uapi/drm/drm_mode.h> #include <uapi/drm/drm_fourcc.h> #include <drm/drm_modeset_lock.h> #include <drm/drm_rect.h> #include <drm/drm_mode_object.h> #include <drm/drm_framebuffer.h> #include <drm/drm_modes.h> #include <drm/drm_connector.h> #include <drm/drm_property.h> #include <drm/drm_bridge.h> #include <drm/drm_edid.h> #include <drm/drm_plane.h> #include <drm/drm_blend.h> #include <drm/drm_color_mgmt.h> #include <drm/drm_debugfs_crc.h> #include <drm/drm_mode_config.h> struct drm_device; struct drm_mode_set; struct drm_file; struct drm_clip_rect; struct drm_printer; struct device_node; struct dma_fence; struct edid; static inline int64_t U642I64(uint64_t val) { return (int64_t)*((int64_t *)&val); } static inline uint64_t I642U64(int64_t val) { return (uint64_t)*((uint64_t *)&val); } struct drm_crtc; struct drm_pending_vblank_event; struct drm_plane; struct drm_bridge; struct drm_atomic_state; struct drm_crtc_helper_funcs; struct drm_plane_helper_funcs; /** * struct drm_crtc_state - mutable CRTC state * * Note that the distinction between @enable and @active is rather subtile: * Flipping @active while @enable is set without changing anything else may * never return in a failure from the &drm_mode_config_funcs.atomic_check * callback. Userspace assumes that a DPMS On will always succeed. In other * words: @enable controls resource assignment, @active controls the actual * hardware state. * * The three booleans active_changed, connectors_changed and mode_changed are * intended to indicate whether a full modeset is needed, rather than strictly * describing what has changed in a commit. See also: * drm_atomic_crtc_needs_modeset() * * WARNING: Transitional helpers (like drm_helper_crtc_mode_set() or * drm_helper_crtc_mode_set_base()) do not maintain many of the derived control * state like @plane_mask so drivers not converted over to atomic helpers should * not rely on these being accurate! */ struct drm_crtc_state { /** @crtc: backpointer to the CRTC */ struct drm_crtc *crtc; /** * @enable: Whether the CRTC should be enabled, gates all other state. * This controls reservations of shared resources. Actual hardware state * is controlled by @active. */ bool enable; /** * @active: Whether the CRTC is actively displaying (used for DPMS). * Implies that @enable is set. The driver must not release any shared * resources if @active is set to false but @enable still true, because * userspace expects that a DPMS ON always succeeds. * * Hence drivers must not consult @active in their various * &drm_mode_config_funcs.atomic_check callback to reject an atomic * commit. They can consult it to aid in the computation of derived * hardware state, since even in the DPMS OFF state the display hardware * should be as much powered down as when the CRTC is completely * disabled through setting @enable to false. */ bool active; /** * @planes_changed: Planes on this crtc are updated. Used by the atomic * helpers and drivers to steer the atomic commit control flow. */ bool planes_changed : 1; /** * @mode_changed: @mode or @enable has been changed. Used by the atomic * helpers and drivers to steer the atomic commit control flow. See also * drm_atomic_crtc_needs_modeset(). * * Drivers are supposed to set this for any CRTC state changes that * require a full modeset. They can also reset it to false if e.g. a * @mode change can be done without a full modeset by only changing * scaler settings. */ bool mode_changed : 1; /** * @active_changed: @active has been toggled. Used by the atomic * helpers and drivers to steer the atomic commit control flow. See also * drm_atomic_crtc_needs_modeset(). */ bool active_changed : 1; /** * @connectors_changed: Connectors to this crtc have been updated, * either in their state or routing. Used by the atomic * helpers and drivers to steer the atomic commit control flow. See also * drm_atomic_crtc_needs_modeset(). * * Drivers are supposed to set this as-needed from their own atomic * check code, e.g. from &drm_encoder_helper_funcs.atomic_check */ bool connectors_changed : 1; /** * @zpos_changed: zpos values of planes on this crtc have been updated. * Used by the atomic helpers and drivers to steer the atomic commit * control flow. */ bool zpos_changed : 1; /** * @color_mgmt_changed: Color management properties have changed * (@gamma_lut, @degamma_lut or @ctm). Used by the atomic helpers and * drivers to steer the atomic commit control flow. */ bool color_mgmt_changed : 1; /** * @no_vblank: * * Reflects the ability of a CRTC to send VBLANK events. This state * usually depends on the pipeline configuration, and the main usuage * is CRTCs feeding a writeback connector operating in oneshot mode. * In this case the VBLANK event is only generated when a job is queued * to the writeback connector, and we want the core to fake VBLANK * events when this part of the pipeline hasn't changed but others had * or when the CRTC and connectors are being disabled. * * __drm_atomic_helper_crtc_duplicate_state() will not reset the value * from the current state, the CRTC driver is then responsible for * updating this field when needed. * * Note that the combination of &drm_crtc_state.event == NULL and * &drm_crtc_state.no_blank == true is valid and usually used when the * writeback connector attached to the CRTC has a new job queued. In * this case the driver will send the VBLANK event on its own when the * writeback job is complete. */ bool no_vblank : 1; /** * @plane_mask: Bitmask of drm_plane_mask(plane) of planes attached to * this CRTC. */ u32 plane_mask; /** * @connector_mask: Bitmask of drm_connector_mask(connector) of * connectors attached to this CRTC. */ u32 connector_mask; /** * @encoder_mask: Bitmask of drm_encoder_mask(encoder) of encoders * attached to this CRTC. */ u32 encoder_mask; /** * @adjusted_mode: * * Internal display timings which can be used by the driver to handle * differences between the mode requested by userspace in @mode and what * is actually programmed into the hardware. * * For drivers using &drm_bridge, this stores hardware display timings * used between the CRTC and the first bridge. For other drivers, the * meaning of the adjusted_mode field is purely driver implementation * defined information, and will usually be used to store the hardware * display timings used between the CRTC and encoder blocks. */ struct drm_display_mode adjusted_mode; /** * @mode: * * Display timings requested by userspace. The driver should try to * match the refresh rate as close as possible (but note that it's * undefined what exactly is close enough, e.g. some of the HDMI modes * only differ in less than 1% of the refresh rate). The active width * and height as observed by userspace for positioning planes must match * exactly. * * For external connectors where the sink isn't fixed (like with a * built-in panel), this mode here should match the physical mode on the * wire to the last details (i.e. including sync polarities and * everything). */ struct drm_display_mode mode; /** * @mode_blob: &drm_property_blob for @mode, for exposing the mode to * atomic userspace. */ struct drm_property_blob *mode_blob; /** * @degamma_lut: * * Lookup table for converting framebuffer pixel data before apply the * color conversion matrix @ctm. See drm_crtc_enable_color_mgmt(). The * blob (if not NULL) is an array of &struct drm_color_lut. */ struct drm_property_blob *degamma_lut; /** * @ctm: * * Color transformation matrix. See drm_crtc_enable_color_mgmt(). The * blob (if not NULL) is a &struct drm_color_ctm. */ struct drm_property_blob *ctm; /** * @gamma_lut: * * Lookup table for converting pixel data after the color conversion * matrix @ctm. See drm_crtc_enable_color_mgmt(). The blob (if not * NULL) is an array of &struct drm_color_lut. */ struct drm_property_blob *gamma_lut; /** * @target_vblank: * * Target vertical blank period when a page flip * should take effect. */ u32 target_vblank; /** * @pageflip_flags: * * DRM_MODE_PAGE_FLIP_* flags, as passed to the page flip ioctl. * Zero in any other case. */ u32 pageflip_flags; /** * @event: * * Optional pointer to a DRM event to signal upon completion of the * state update. The driver must send out the event when the atomic * commit operation completes. There are two cases: * * - The event is for a CRTC which is being disabled through this * atomic commit. In that case the event can be send out any time * after the hardware has stopped scanning out the current * framebuffers. It should contain the timestamp and counter for the * last vblank before the display pipeline was shut off. The simplest * way to achieve that is calling drm_crtc_send_vblank_event() * somewhen after drm_crtc_vblank_off() has been called. * * - For a CRTC which is enabled at the end of the commit (even when it * undergoes an full modeset) the vblank timestamp and counter must * be for the vblank right before the first frame that scans out the * new set of buffers. Again the event can only be sent out after the * hardware has stopped scanning out the old buffers. * * - Events for disabled CRTCs are not allowed, and drivers can ignore * that case. * * This can be handled by the drm_crtc_send_vblank_event() function, * which the driver should call on the provided event upon completion of * the atomic commit. Note that if the driver supports vblank signalling * and timestamping the vblank counters and timestamps must agree with * the ones returned from page flip events. With the current vblank * helper infrastructure this can be achieved by holding a vblank * reference while the page flip is pending, acquired through * drm_crtc_vblank_get() and released with drm_crtc_vblank_put(). * Drivers are free to implement their own vblank counter and timestamp * tracking though, e.g. if they have accurate timestamp registers in * hardware. * * For hardware which supports some means to synchronize vblank * interrupt delivery with committing display state there's also * drm_crtc_arm_vblank_event(). See the documentation of that function * for a detailed discussion of the constraints it needs to be used * safely. * * If the device can't notify of flip completion in a race-free way * at all, then the event should be armed just after the page flip is * committed. In the worst case the driver will send the event to * userspace one frame too late. This doesn't allow for a real atomic * update, but it should avoid tearing. */ struct drm_pending_vblank_event *event; /** * @commit: * * This tracks how the commit for this update proceeds through the * various phases. This is never cleared, except when we destroy the * state, so that subsequent commits can synchronize with previous ones. */ struct drm_crtc_commit *commit; /** @state: backpointer to global drm_atomic_state */ struct drm_atomic_state *state; }; /** * struct drm_crtc_funcs - control CRTCs for a given device * * The drm_crtc_funcs structure is the central CRTC management structure * in the DRM. Each CRTC controls one or more connectors (note that the name * CRTC is simply historical, a CRTC may control LVDS, VGA, DVI, TV out, etc. * connectors, not just CRTs). * * Each driver is responsible for filling out this structure at startup time, * in addition to providing other modesetting features, like i2c and DDC * bus accessors. */ struct drm_crtc_funcs { /** * @reset: * * Reset CRTC hardware and software state to off. This function isn't * called by the core directly, only through drm_mode_config_reset(). * It's not a helper hook only for historical reasons. * * Atomic drivers can use drm_atomic_helper_crtc_reset() to reset * atomic state using this hook. */ void (*reset)(struct drm_crtc *crtc); /** * @cursor_set: * * Update the cursor image. The cursor position is relative to the CRTC * and can be partially or fully outside of the visible area. * * Note that contrary to all other KMS functions the legacy cursor entry * points don't take a framebuffer object, but instead take directly a * raw buffer object id from the driver's buffer manager (which is * either GEM or TTM for current drivers). * * This entry point is deprecated, drivers should instead implement * universal plane support and register a proper cursor plane using * drm_crtc_init_with_planes(). * * This callback is optional * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*cursor_set)(struct drm_crtc *crtc, struct drm_file *file_priv, uint32_t handle, uint32_t width, uint32_t height); /** * @cursor_set2: * * Update the cursor image, including hotspot information. The hotspot * must not affect the cursor position in CRTC coordinates, but is only * meant as a hint for virtualized display hardware to coordinate the * guests and hosts cursor position. The cursor hotspot is relative to * the cursor image. Otherwise this works exactly like @cursor_set. * * This entry point is deprecated, drivers should instead implement * universal plane support and register a proper cursor plane using * drm_crtc_init_with_planes(). * * This callback is optional. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*cursor_set2)(struct drm_crtc *crtc, struct drm_file *file_priv, uint32_t handle, uint32_t width, uint32_t height, int32_t hot_x, int32_t hot_y); /** * @cursor_move: * * Update the cursor position. The cursor does not need to be visible * when this hook is called. * * This entry point is deprecated, drivers should instead implement * universal plane support and register a proper cursor plane using * drm_crtc_init_with_planes(). * * This callback is optional. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*cursor_move)(struct drm_crtc *crtc, int x, int y); /** * @gamma_set: * * Set gamma on the CRTC. * * This callback is optional. * * Atomic drivers who want to support gamma tables should implement the * atomic color management support, enabled by calling * drm_crtc_enable_color_mgmt(), which then supports the legacy gamma * interface through the drm_atomic_helper_legacy_gamma_set() * compatibility implementation. */ int (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, uint32_t size, struct drm_modeset_acquire_ctx *ctx); /** * @destroy: * * Clean up plane resources. This is only called at driver unload time * through drm_mode_config_cleanup() since a CRTC cannot be hotplugged * in DRM. */ void (*destroy)(struct drm_crtc *crtc); /** * @set_config: * * This is the main legacy entry point to change the modeset state on a * CRTC. All the details of the desired configuration are passed in a * &struct drm_mode_set - see there for details. * * Drivers implementing atomic modeset should use * drm_atomic_helper_set_config() to implement this hook. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*set_config)(struct drm_mode_set *set, struct drm_modeset_acquire_ctx *ctx); /** * @page_flip: * * Legacy entry point to schedule a flip to the given framebuffer. * * Page flipping is a synchronization mechanism that replaces the frame * buffer being scanned out by the CRTC with a new frame buffer during * vertical blanking, avoiding tearing (except when requested otherwise * through the DRM_MODE_PAGE_FLIP_ASYNC flag). When an application * requests a page flip the DRM core verifies that the new frame buffer * is large enough to be scanned out by the CRTC in the currently * configured mode and then calls this hook with a pointer to the new * frame buffer. * * The driver must wait for any pending rendering to the new framebuffer * to complete before executing the flip. It should also wait for any * pending rendering from other drivers if the underlying buffer is a * shared dma-buf. * * An application can request to be notified when the page flip has * completed. The drm core will supply a &struct drm_event in the event * parameter in this case. This can be handled by the * drm_crtc_send_vblank_event() function, which the driver should call on * the provided event upon completion of the flip. Note that if * the driver supports vblank signalling and timestamping the vblank * counters and timestamps must agree with the ones returned from page * flip events. With the current vblank helper infrastructure this can * be achieved by holding a vblank reference while the page flip is * pending, acquired through drm_crtc_vblank_get() and released with * drm_crtc_vblank_put(). Drivers are free to implement their own vblank * counter and timestamp tracking though, e.g. if they have accurate * timestamp registers in hardware. * * This callback is optional. * * NOTE: * * Very early versions of the KMS ABI mandated that the driver must * block (but not reject) any rendering to the old framebuffer until the * flip operation has completed and the old framebuffer is no longer * visible. This requirement has been lifted, and userspace is instead * expected to request delivery of an event and wait with recycling old * buffers until such has been received. * * RETURNS: * * 0 on success or a negative error code on failure. Note that if a * page flip operation is already pending the callback should return * -EBUSY. Pageflips on a disabled CRTC (either by setting a NULL mode * or just runtime disabled through DPMS respectively the new atomic * "ACTIVE" state) should result in an -EINVAL error code. Note that * drm_atomic_helper_page_flip() checks this already for atomic drivers. */ int (*page_flip)(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event, uint32_t flags, struct drm_modeset_acquire_ctx *ctx); /** * @page_flip_target: * * Same as @page_flip but with an additional parameter specifying the * absolute target vertical blank period (as reported by * drm_crtc_vblank_count()) when the flip should take effect. * * Note that the core code calls drm_crtc_vblank_get before this entry * point, and will call drm_crtc_vblank_put if this entry point returns * any non-0 error code. It's the driver's responsibility to call * drm_crtc_vblank_put after this entry point returns 0, typically when * the flip completes. */ int (*page_flip_target)(struct drm_crtc *crtc, struct drm_framebuffer *fb, struct drm_pending_vblank_event *event, uint32_t flags, uint32_t target, struct drm_modeset_acquire_ctx *ctx); /** * @set_property: * * This is the legacy entry point to update a property attached to the * CRTC. * * This callback is optional if the driver does not support any legacy * driver-private properties. For atomic drivers it is not used because * property handling is done entirely in the DRM core. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*set_property)(struct drm_crtc *crtc, struct drm_property *property, uint64_t val); /** * @atomic_duplicate_state: * * Duplicate the current atomic state for this CRTC and return it. * The core and helpers guarantee that any atomic state duplicated with * this hook and still owned by the caller (i.e. not transferred to the * driver by calling &drm_mode_config_funcs.atomic_commit) will be * cleaned up by calling the @atomic_destroy_state hook in this * structure. * * This callback is mandatory for atomic drivers. * * Atomic drivers which don't subclass &struct drm_crtc_state should use * drm_atomic_helper_crtc_duplicate_state(). Drivers that subclass the * state structure to extend it with driver-private state should use * __drm_atomic_helper_crtc_duplicate_state() to make sure shared state is * duplicated in a consistent fashion across drivers. * * It is an error to call this hook before &drm_crtc.state has been * initialized correctly. * * NOTE: * * If the duplicate state references refcounted resources this hook must * acquire a reference for each of them. The driver must release these * references again in @atomic_destroy_state. * * RETURNS: * * Duplicated atomic state or NULL when the allocation failed. */ struct drm_crtc_state *(*atomic_duplicate_state)(struct drm_crtc *crtc); /** * @atomic_destroy_state: * * Destroy a state duplicated with @atomic_duplicate_state and release * or unreference all resources it references * * This callback is mandatory for atomic drivers. */ void (*atomic_destroy_state)(struct drm_crtc *crtc, struct drm_crtc_state *state); /** * @atomic_set_property: * * Decode a driver-private property value and store the decoded value * into the passed-in state structure. Since the atomic core decodes all * standardized properties (even for extensions beyond the core set of * properties which might not be implemented by all drivers) this * requires drivers to subclass the state structure. * * Such driver-private properties should really only be implemented for * truly hardware/vendor specific state. Instead it is preferred to * standardize atomic extension and decode the properties used to expose * such an extension in the core. * * Do not call this function directly, use * drm_atomic_crtc_set_property() instead. * * This callback is optional if the driver does not support any * driver-private atomic properties. * * NOTE: * * This function is called in the state assembly phase of atomic * modesets, which can be aborted for any reason (including on * userspace's request to just check whether a configuration would be * possible). Drivers MUST NOT touch any persistent state (hardware or * software) or data structures except the passed in @state parameter. * * Also since userspace controls in which order properties are set this * function must not do any input validation (since the state update is * incomplete and hence likely inconsistent). Instead any such input * validation must be done in the various atomic_check callbacks. * * RETURNS: * * 0 if the property has been found, -EINVAL if the property isn't * implemented by the driver (which should never happen, the core only * asks for properties attached to this CRTC). No other validation is * allowed by the driver. The core already checks that the property * value is within the range (integer, valid enum value, ...) the driver * set when registering the property. */ int (*atomic_set_property)(struct drm_crtc *crtc, struct drm_crtc_state *state, struct drm_property *property, uint64_t val); /** * @atomic_get_property: * * Reads out the decoded driver-private property. This is used to * implement the GETCRTC IOCTL. * * Do not call this function directly, use * drm_atomic_crtc_get_property() instead. * * This callback is optional if the driver does not support any * driver-private atomic properties. * * RETURNS: * * 0 on success, -EINVAL if the property isn't implemented by the * driver (which should never happen, the core only asks for * properties attached to this CRTC). */ int (*atomic_get_property)(struct drm_crtc *crtc, const struct drm_crtc_state *state, struct drm_property *property, uint64_t *val); /** * @late_register: * * This optional hook can be used to register additional userspace * interfaces attached to the crtc like debugfs interfaces. * It is called late in the driver load sequence from drm_dev_register(). * Everything added from this callback should be unregistered in * the early_unregister callback. * * Returns: * * 0 on success, or a negative error code on failure. */ int (*late_register)(struct drm_crtc *crtc); /** * @early_unregister: * * This optional hook should be used to unregister the additional * userspace interfaces attached to the crtc from * @late_register. It is called from drm_dev_unregister(), * early in the driver unload sequence to disable userspace access * before data structures are torndown. */ void (*early_unregister)(struct drm_crtc *crtc); /** * @set_crc_source: * * Changes the source of CRC checksums of frames at the request of * userspace, typically for testing purposes. The sources available are * specific of each driver and a %NULL value indicates that CRC * generation is to be switched off. * * When CRC generation is enabled, the driver should call * drm_crtc_add_crc_entry() at each frame, providing any information * that characterizes the frame contents in the crcN arguments, as * provided from the configured source. Drivers must accept an "auto" * source name that will select a default source for this CRTC. * * Note that "auto" can depend upon the current modeset configuration, * e.g. it could pick an encoder or output specific CRC sampling point. * * This callback is optional if the driver does not support any CRC * generation functionality. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*set_crc_source)(struct drm_crtc *crtc, const char *source); /** * @verify_crc_source: * * verifies the source of CRC checksums of frames before setting the * source for CRC and during crc open. Source parameter can be NULL * while disabling crc source. * * This callback is optional if the driver does not support any CRC * generation functionality. * * RETURNS: * * 0 on success or a negative error code on failure. */ int (*verify_crc_source)(struct drm_crtc *crtc, const char *source, size_t *values_cnt); /** * @get_crc_sources: * * Driver callback for getting a list of all the available sources for * CRC generation. This callback depends upon verify_crc_source, So * verify_crc_source callback should be implemented before implementing * this. Driver can pass full list of available crc sources, this * callback does the verification on each crc-source before passing it * to userspace. * * This callback is optional if the driver does not support exporting of * possible CRC sources list. * * RETURNS: * * a constant character pointer to the list of all the available CRC * sources. On failure driver should return NULL. count should be * updated with number of sources in list. if zero we don't process any * source from the list. */ const char *const *(*get_crc_sources)(struct drm_crtc *crtc, size_t *count); /** * @atomic_print_state: * * If driver subclasses &struct drm_crtc_state, it should implement * this optional hook for printing additional driver specific state. * * Do not call this directly, use drm_atomic_crtc_print_state() * instead. */ void (*atomic_print_state)(struct drm_printer *p, const struct drm_crtc_state *state); /** * @get_vblank_counter: * * Driver callback for fetching a raw hardware vblank counter for the * CRTC. It's meant to be used by new drivers as the replacement of * &drm_driver.get_vblank_counter hook. * * This callback is optional. If a device doesn't have a hardware * counter, the driver can simply leave the hook as NULL. The DRM core * will account for missed vblank events while interrupts where disabled * based on system timestamps. * * Wraparound handling and loss of events due to modesetting is dealt * with in the DRM core code, as long as drivers call * drm_crtc_vblank_off() and drm_crtc_vblank_on() when disabling or * enabling a CRTC. * * See also &drm_device.vblank_disable_immediate and * &drm_device.max_vblank_count. * * Returns: * * Raw vblank counter value. */ u32 (*get_vblank_counter)(struct drm_crtc *crtc); /** * @enable_vblank: * * Enable vblank interrupts for the CRTC. It's meant to be used by * new drivers as the replacement of &drm_driver.enable_vblank hook. * * Returns: * * Zero on success, appropriate errno if the vblank interrupt cannot * be enabled. */ int (*enable_vblank)(struct drm_crtc *crtc); /** * @disable_vblank: * * Disable vblank interrupts for the CRTC. It's meant to be used by * new drivers as the replacement of &drm_driver.disable_vblank hook. */ void (*disable_vblank)(struct drm_crtc *crtc); }; /** * struct drm_crtc - central CRTC control structure * * Each CRTC may have one or more connectors associated with it. This structure * allows the CRTC to be controlled. */ struct drm_crtc { /** @dev: parent DRM device */ struct drm_device *dev; /** @port: OF node used by drm_of_find_possible_crtcs(). */ struct device_node *port; /** * @head: * * List of all CRTCs on @dev, linked from &drm_mode_config.crtc_list. * Invariant over the lifetime of @dev and therefore does not need * locking. */ struct list_head head; /** @name: human readable name, can be overwritten by the driver */ char *name; /** * @mutex: * * This provides a read lock for the overall CRTC state (mode, dpms * state, ...) and a write lock for everything which can be update * without a full modeset (fb, cursor data, CRTC properties ...). A full * modeset also need to grab &drm_mode_config.connection_mutex. * * For atomic drivers specifically this protects @state. */ struct drm_modeset_lock mutex; /** @base: base KMS object for ID tracking etc. */ struct drm_mode_object base; /** * @primary: * Primary plane for this CRTC. Note that this is only * relevant for legacy IOCTL, it specifies the plane implicitly used by * the SETCRTC and PAGE_FLIP IOCTLs. It does not have any significance * beyond that. */ struct drm_plane *primary; /** * @cursor: * Cursor plane for this CRTC. Note that this is only relevant for * legacy IOCTL, it specifies the plane implicitly used by the SETCURSOR * and SETCURSOR2 IOCTLs. It does not have any significance * beyond that. */ struct drm_plane *cursor; /** * @index: Position inside the mode_config.list, can be used as an array * index. It is invariant over the lifetime of the CRTC. */ unsigned index; /** * @cursor_x: Current x position of the cursor, used for universal * cursor planes because the SETCURSOR IOCTL only can update the * framebuffer without supplying the coordinates. Drivers should not use * this directly, atomic drivers should look at &drm_plane_state.crtc_x * of the cursor plane instead. */ int cursor_x; /** * @cursor_y: Current y position of the cursor, used for universal * cursor planes because the SETCURSOR IOCTL only can update the * framebuffer without supplying the coordinates. Drivers should not use * this directly, atomic drivers should look at &drm_plane_state.crtc_y * of the cursor plane instead. */ int cursor_y; /** * @enabled: * * Is this CRTC enabled? Should only be used by legacy drivers, atomic * drivers should instead consult &drm_crtc_state.enable and * &drm_crtc_state.active. Atomic drivers can update this by calling * drm_atomic_helper_update_legacy_modeset_state(). */ bool enabled; /** * @mode: * * Current mode timings. Should only be used by legacy drivers, atomic * drivers should instead consult &drm_crtc_state.mode. Atomic drivers * can update this by calling * drm_atomic_helper_update_legacy_modeset_state(). */ struct drm_display_mode mode; /** * @hwmode: * * Programmed mode in hw, after adjustments for encoders, crtc, panel * scaling etc. Should only be used by legacy drivers, for high * precision vblank timestamps in * drm_calc_vbltimestamp_from_scanoutpos(). * * Note that atomic drivers should not use this, but instead use * &drm_crtc_state.adjusted_mode. And for high-precision timestamps * drm_calc_vbltimestamp_from_scanoutpos() used &drm_vblank_crtc.hwmode, * which is filled out by calling drm_calc_timestamping_constants(). */ struct drm_display_mode hwmode; /** * @x: * x position on screen. Should only be used by legacy drivers, atomic * drivers should look at &drm_plane_state.crtc_x of the primary plane * instead. Updated by calling * drm_atomic_helper_update_legacy_modeset_state(). */ int x; /** * @y: * y position on screen. Should only be used by legacy drivers, atomic * drivers should look at &drm_plane_state.crtc_y of the primary plane * instead. Updated by calling * drm_atomic_helper_update_legacy_modeset_state(). */ int y; /** @funcs: CRTC control functions */ const struct drm_crtc_funcs *funcs; /** * @gamma_size: Size of legacy gamma ramp reported to userspace. Set up * by calling drm_mode_crtc_set_gamma_size(). */ uint32_t gamma_size; /** * @gamma_store: Gamma ramp values used by the legacy SETGAMMA and * GETGAMMA IOCTls. Set up by calling drm_mode_crtc_set_gamma_size(). */ uint16_t *gamma_store; /** @helper_private: mid-layer private data */ const struct drm_crtc_helper_funcs *helper_private; /** @properties: property tracking for this CRTC */ struct drm_object_properties properties; /** * @state: * * Current atomic state for this CRTC. * * This is protected by @mutex. Note that nonblocking atomic commits * access the current CRTC state without taking locks. Either by going * through the &struct drm_atomic_state pointers, see * for_each_oldnew_crtc_in_state(), for_each_old_crtc_in_state() and * for_each_new_crtc_in_state(). Or through careful ordering of atomic * commit operations as implemented in the atomic helpers, see * &struct drm_crtc_commit. */ struct drm_crtc_state *state; /** * @commit_list: * * List of &drm_crtc_commit structures tracking pending commits. * Protected by @commit_lock. This list holds its own full reference, * as does the ongoing commit. * * "Note that the commit for a state change is also tracked in * &drm_crtc_state.commit. For accessing the immediately preceding * commit in an atomic update it is recommended to just use that * pointer in the old CRTC state, since accessing that doesn't need * any locking or list-walking. @commit_list should only be used to * stall for framebuffer cleanup that's signalled through * &drm_crtc_commit.cleanup_done." */ struct list_head commit_list; /** * @commit_lock: * * Spinlock to protect @commit_list. */ spinlock_t commit_lock; #ifdef CONFIG_DEBUG_FS /** * @debugfs_entry: * * Debugfs directory for this CRTC. */ struct dentry *debugfs_entry; #endif /** * @crc: * * Configuration settings of CRC capture. */ struct drm_crtc_crc crc; /** * @fence_context: * * timeline context used for fence operations. */ unsigned int fence_context; /** * @fence_lock: * * spinlock to protect the fences in the fence_context. */ spinlock_t fence_lock; /** * @fence_seqno: * * Seqno variable used as monotonic counter for the fences * created on the CRTC's timeline. */ unsigned long fence_seqno; /** * @timeline_name: * * The name of the CRTC's fence timeline. */ char timeline_name[32]; }; /** * struct drm_mode_set - new values for a CRTC config change * @fb: framebuffer to use for new config * @crtc: CRTC whose configuration we're about to change * @mode: mode timings to use * @x: position of this CRTC relative to @fb * @y: position of this CRTC relative to @fb * @connectors: array of connectors to drive with this CRTC if possible * @num_connectors: size of @connectors array * * This represents a modeset configuration for the legacy SETCRTC ioctl and is * also used internally. Atomic drivers instead use &drm_atomic_state. */ struct drm_mode_set { struct drm_framebuffer *fb; struct drm_crtc *crtc; struct drm_display_mode *mode; uint32_t x; uint32_t y; struct drm_connector **connectors; size_t num_connectors; }; #define obj_to_crtc(x) container_of(x, struct drm_crtc, base) __printf(6, 7) int drm_crtc_init_with_planes(struct drm_device *dev, struct drm_crtc *crtc, struct drm_plane *primary, struct drm_plane *cursor, const struct drm_crtc_funcs *funcs, const char *name, ...); void drm_crtc_cleanup(struct drm_crtc *crtc); /** * drm_crtc_index - find the index of a registered CRTC * @crtc: CRTC to find index for * * Given a registered CRTC, return the index of that CRTC within a DRM * device's list of CRTCs. */ static inline unsigned int drm_crtc_index(const struct drm_crtc *crtc) { return crtc->index; } /** * drm_crtc_mask - find the mask of a registered CRTC * @crtc: CRTC to find mask for * * Given a registered CRTC, return the mask bit of that CRTC for the * &drm_encoder.possible_crtcs and &drm_plane.possible_crtcs fields. */ static inline uint32_t drm_crtc_mask(const struct drm_crtc *crtc) { return 1 << drm_crtc_index(crtc); } int drm_crtc_force_disable(struct drm_crtc *crtc); int drm_crtc_force_disable_all(struct drm_device *dev); int drm_mode_set_config_internal(struct drm_mode_set *set); struct drm_crtc *drm_crtc_from_index(struct drm_device *dev, int idx); /** * drm_crtc_find - look up a CRTC object from its ID * @dev: DRM device * @file_priv: drm file to check for lease against. * @id: &drm_mode_object ID * * This can be used to look up a CRTC from its userspace ID. Only used by * drivers for legacy IOCTLs and interface, nowadays extensions to the KMS * userspace interface should be done using &drm_property. */ static inline struct drm_crtc *drm_crtc_find(struct drm_device *dev, struct drm_file *file_priv, uint32_t id) { struct drm_mode_object *mo; mo = drm_mode_object_find(dev, file_priv, id, DRM_MODE_OBJECT_CRTC); return mo ? obj_to_crtc(mo) : NULL; } /** * drm_for_each_crtc - iterate over all CRTCs * @crtc: a &struct drm_crtc as the loop cursor * @dev: the &struct drm_device * * Iterate over all CRTCs of @dev. */ #define drm_for_each_crtc(crtc, dev) \ list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head) #endif /* __DRM_CRTC_H__ */
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
Created with Cregit http://github.com/cregit/cregit
Version 2.0-RC1