cregit-Linux how code gets into the kernel

Release 4.7 arch/arm/mach-omap2/board-ldp.c

/*
 * linux/arch/arm/mach-omap2/board-ldp.c
 *
 * Copyright (C) 2008 Texas Instruments Inc.
 * Nishant Kamat <nskamat@ti.com>
 *
 * Modified from mach-omap2/board-3430sdp.c
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <linux/mmc/host.h>
#include <linux/usb/phy.h>
#include <linux/platform_data/spi-omap2-mcspi.h>

#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

#include "common.h"
#include "gpmc.h"
#include "gpmc-smsc911x.h"

#include <video/omapdss.h>
#include <video/omap-panel-data.h>

#include "board-flash.h"
#include "mux.h"
#include "hsmmc.h"
#include "control.h"
#include "common-board-devices.h"


#define LDP_SMSC911X_CS		1

#define LDP_SMSC911X_GPIO	152

#define DEBUG_BASE		0x08000000

#define LDP_ETHR_START		DEBUG_BASE


static uint32_t board_keymap[] = {
	KEY(0, 0, KEY_1),
	KEY(1, 0, KEY_2),
	KEY(2, 0, KEY_3),
	KEY(0, 1, KEY_4),
	KEY(1, 1, KEY_5),
	KEY(2, 1, KEY_6),
	KEY(3, 1, KEY_F5),
	KEY(0, 2, KEY_7),
	KEY(1, 2, KEY_8),
	KEY(2, 2, KEY_9),
	KEY(3, 2, KEY_F6),
	KEY(0, 3, KEY_F7),
	KEY(1, 3, KEY_0),
	KEY(2, 3, KEY_F8),
	PERSISTENT_KEY(4, 5),
	KEY(4, 4, KEY_VOLUMEUP),
	KEY(5, 5, KEY_VOLUMEDOWN),
	0
};


static struct matrix_keymap_data board_map_data = {
	.keymap			= board_keymap,
	.keymap_size		= ARRAY_SIZE(board_keymap),
};


static struct twl4030_keypad_data ldp_kp_twl4030_data = {
	.keymap_data	= &board_map_data,
	.rows		= 6,
	.cols		= 6,
	.rep		= 1,
};


static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
	[0] = {
		.code			= KEY_ENTER,
		.gpio			= 101,
		.desc			= "enter sw",
		.active_low		= 1,
		.debounce_interval	= 30,
        },
	[1] = {
		.code			= KEY_F1,
		.gpio			= 102,
		.desc			= "func 1",
		.active_low		= 1,
		.debounce_interval	= 30,
        },
	[2] = {
		.code			= KEY_F2,
		.gpio			= 103,
		.desc			= "func 2",
		.active_low		= 1,
		.debounce_interval	= 30,
        },
	[3] = {
		.code			= KEY_F3,
		.gpio			= 104,
		.desc			= "func 3",
		.active_low		= 1,
		.debounce_interval 	= 30,
        },
	[4] = {
		.code			= KEY_F4,
		.gpio			= 105,
		.desc			= "func 4",
		.active_low		= 1,
		.debounce_interval	= 30,
        },
	[5] = {
		.code			= KEY_LEFT,
		.gpio			= 106,
		.desc			= "left sw",
		.active_low		= 1,
		.debounce_interval	= 30,
        },
	[6] = {
		.code			= KEY_RIGHT,
		.gpio			= 107,
		.desc			= "right sw",
		.active_low		= 1,
		.debounce_interval	= 30,
        },
	[7] = {
		.code			= KEY_UP,
		.gpio			= 108,
		.desc			= "up sw",
		.active_low		= 1,
		.debounce_interval	= 30,
        },
	[8] = {
		.code			= KEY_DOWN,
		.gpio			= 109,
		.desc			= "down sw",
		.active_low		= 1,
		.debounce_interval	= 30,
        },
};


static struct gpio_keys_platform_data ldp_gpio_keys = {
	.buttons		= ldp_gpio_keys_buttons,
	.nbuttons		= ARRAY_SIZE(ldp_gpio_keys_buttons),
	.rep			= 1,
};


static struct platform_device ldp_gpio_keys_device = {
	.name		= "gpio-keys",
	.id		= -1,
	.dev		= {
		.platform_data	= &ldp_gpio_keys,
        },
};


static struct omap_smsc911x_platform_data smsc911x_cfg = {
	.cs             = LDP_SMSC911X_CS,
	.gpio_irq       = LDP_SMSC911X_GPIO,
	.gpio_reset     = -EINVAL,
	.flags		= SMSC911X_USE_32BIT,
};


static inline void __init ldp_init_smsc911x(void) { gpmc_smsc911x_init(&smsc911x_cfg); }

Contributors

PersonTokensPropCommitsCommitProp
stanley miaostanley miao1381.25%133.33%
mike rapoportmike rapoport212.50%133.33%
steve glendinningsteve glendinning16.25%133.33%
Total16100.00%3100.00%

/* LCD */ #define LCD_PANEL_RESET_GPIO 55 #define LCD_PANEL_QVGA_GPIO 56 static const struct display_timing ldp_lcd_videomode = { .pixelclock = { 0, 5400000, 0 }, .hactive = { 0, 240, 0 }, .hfront_porch = { 0, 3, 0 }, .hback_porch = { 0, 39, 0 }, .hsync_len = { 0, 3, 0 }, .vactive = { 0, 320, 0 }, .vfront_porch = { 0, 2, 0 }, .vback_porch = { 0, 7, 0 }, .vsync_len = { 0, 1, 0 }, .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, }; static struct panel_dpi_platform_data ldp_lcd_pdata = { .name = "lcd", .source = "dpi.0", .data_lines = 18, .display_timing = &ldp_lcd_videomode, .enable_gpio = -1, /* filled in code */ .backlight_gpio = -1, /* filled in code */ }; static struct platform_device ldp_lcd_device = { .name = "panel-dpi", .id = 0, .dev.platform_data = &ldp_lcd_pdata, }; static struct omap_dss_board_info ldp_dss_data = { .default_display_name = "lcd", };
static void __init ldp_display_init(void) { int r; static struct gpio gpios[] __initdata = { {LCD_PANEL_RESET_GPIO, GPIOF_OUT_INIT_HIGH, "LCD RESET"}, {LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "LCD QVGA"}, }; r = gpio_request_array(gpios, ARRAY_SIZE(gpios)); if (r) { pr_err("Cannot request LCD GPIOs, error %d\n", r); return; } omap_display_init(&ldp_dss_data); }

Contributors

PersonTokensPropCommitsCommitProp
tomi valkeinentomi valkeinen6594.20%250.00%
imre deakimre deak22.90%125.00%
archit tanejaarchit taneja22.90%125.00%
Total69100.00%4100.00%


static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { int res; /* LCD enable GPIO */ ldp_lcd_pdata.enable_gpio = gpio + 7; /* Backlight enable GPIO */ ldp_lcd_pdata.backlight_gpio = gpio + 15; res = platform_device_register(&ldp_lcd_device); if (res) pr_err("Unable to register LCD: %d\n", res); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
tomi valkeinentomi valkeinen3558.33%250.00%
tony lindgrentony lindgren2236.67%125.00%
archit tanejaarchit taneja35.00%125.00%
Total60100.00%4100.00%

static struct twl4030_gpio_platform_data ldp_gpio_data = { .setup = ldp_twl_gpio_setup, }; static struct regulator_consumer_supply ldp_vmmc1_supply[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data ldp_vmmc1 = { .constraints = { .min_uV = 1850000, .max_uV = 3150000, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(ldp_vmmc1_supply), .consumer_supplies = ldp_vmmc1_supply, }; /* ads7846 on SPI */ static struct regulator_consumer_supply ldp_vaux1_supplies[] = { REGULATOR_SUPPLY("vcc", "spi1.0"), }; /* VAUX1 */ static struct regulator_init_data ldp_vaux1 = { .constraints = { .min_uV = 3000000, .max_uV = 3000000, .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(ldp_vaux1_supplies), .consumer_supplies = ldp_vaux1_supplies, }; static struct regulator_consumer_supply ldp_vpll2_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), REGULATOR_SUPPLY("vdds_dsi", "omapdss_dpi.0"), REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; static struct regulator_init_data ldp_vpll2 = { .constraints = { .name = "VDVI", .min_uV = 1800000, .max_uV = 1800000, .apply_uV = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(ldp_vpll2_supplies), .consumer_supplies = ldp_vpll2_supplies, }; static struct twl4030_platform_data ldp_twldata = { /* platform_data for children goes here */ .vmmc1 = &ldp_vmmc1, .vaux1 = &ldp_vaux1, .vpll2 = &ldp_vpll2, .gpio = &ldp_gpio_data, .keypad = &ldp_kp_twl4030_data, };
static int __init omap_i2c_init(void) { omap3_pmic_get_config(&ldp_twldata, TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0); omap3_pmic_init("twl4030", &ldp_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
nishant kamatnishant kamat3870.37%133.33%
peter ujfalusipeter ujfalusi1222.22%133.33%
mike rapoportmike rapoport47.41%133.33%
Total54100.00%3100.00%

static struct omap2_hsmmc_info mmc[] __initdata = { { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, {} /* Terminator */ }; static struct platform_device *ldp_devices[] __initdata = { &ldp_gpio_keys_device, }; #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; #endif static struct mtd_partition ldp_nand_partitions[] = { /* All the partition sizes are listed in terms of NAND block size */ { .name = "X-Loader-NAND", .offset = 0, .size = 4 * (64 * 2048), /* 512KB, 0x80000 */ .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "U-Boot-NAND", .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ .size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */ .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "Boot Env-NAND", .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */ .size = 2 * (64 * 2048), /* 256KB, 0x40000 */ }, { .name = "Kernel-NAND", .offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/ .size = 240 * (64 * 2048), /* 30M, 0x1E00000 */ }, { .name = "File System - NAND", .offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */ .size = MTDPART_SIZ_FULL, /* 96MB, 0x6000000 */ }, }; static struct regulator_consumer_supply dummy_supplies[] = { REGULATOR_SUPPLY("vddvario", "smsc911x.0"), REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), };
static void __init omap_ldp_init(void) { regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); ldp_init_smsc911x(); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); omap_ads7846_init(1, 54, 310, NULL); omap_serial_init(); omap_sdrc_init(NULL, NULL); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), 0, 0, nand_default_timings); omap_hsmmc_init(mmc); ldp_display_init(); }

Contributors

PersonTokensPropCommitsCommitProp
tony lindgrentony lindgren2928.16%738.89%
nishant kamatnishant kamat1514.56%15.56%
sukumar ghoraisukumar ghorai1312.62%211.11%
russ dillruss dill1211.65%15.56%
stanley miaostanley miao109.71%15.56%
kishon vijay abraham ikishon vijay abraham i98.74%15.56%
mike rapoportmike rapoport87.77%211.11%
tomi valkeinentomi valkeinen32.91%15.56%
maulik mankadmaulik mankad21.94%15.56%
afzal mohammedafzal mohammed21.94%15.56%
Total103100.00%18100.00%

MACHINE_START(OMAP_LDP, "OMAP LDP board") .atag_offset = 0x100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, .init_machine = omap_ldp_init, .init_late = omap3430_init_late, .init_time = omap_init_time, .restart = omap3xxx_restart, MACHINE_END

Overall Contributors

PersonTokensPropCommitsCommitProp
tony lindgrentony lindgren84247.68%1627.12%
tomi valkeinentomi valkeinen38221.63%46.78%
sukumar ghoraisukumar ghorai1629.17%35.08%
nishant kamatnishant kamat1236.96%11.69%
mike rapoportmike rapoport482.72%58.47%
imre deakimre deak412.32%11.69%
russ dillruss dill372.10%11.69%
stanley miaostanley miao362.04%11.69%
russell kingrussell king170.96%58.47%
kishon vijay abraham ikishon vijay abraham i120.68%11.69%
peter ujfalusipeter ujfalusi120.68%11.69%
oleg drokinoleg drokin100.57%11.69%
archit tanejaarchit taneja70.40%23.39%
steve glendinningsteve glendinning60.34%11.69%
shawn guoshawn guo50.28%11.69%
paul walmsleypaul walmsley40.23%23.39%
arnd bergmannarnd bergmann40.23%11.69%
felipe balbifelipe balbi30.17%23.39%
janusz krzysztofikjanusz krzysztofik30.17%11.69%
nicolas pitrenicolas pitre20.11%11.69%
afzal mohammedafzal mohammed20.11%11.69%
maulik mankadmaulik mankad20.11%11.69%
adrian hunteradrian hunter20.11%23.39%
manjunath kondaiah gmanjunath kondaiah g20.11%23.39%
santosh shilimkarsantosh shilimkar10.06%11.69%
stephen warrenstephen warren10.06%11.69%
Total1766100.00%59100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}