cregit-Linux how code gets into the kernel

Release 4.7 arch/arm/mach-omap2/omap-smp.c

/*
 * OMAP4 SMP source file. It contains platform specific functions
 * needed for the linux smp kernel.
 *
 * Copyright (C) 2009 Texas Instruments, Inc.
 *
 * Author:
 *      Santosh Shilimkar <santosh.shilimkar@ti.com>
 *
 * Platform file needed for the OMAP4 SMP. This file is based on arm
 * realview smp platform.
 * * Copyright (c) 2002 ARM Limited.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/init.h>
#include <linux/device.h>
#include <linux/smp.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>

#include <asm/smp_scu.h>
#include <asm/virt.h>

#include "omap-secure.h"
#include "omap-wakeupgen.h"
#include <asm/cputype.h>

#include "soc.h"
#include "iomap.h"
#include "common.h"
#include "clockdomain.h"
#include "pm.h"


#define CPU_MASK		0xff0ffff0

#define CPU_CORTEX_A9		0x410FC090

#define CPU_CORTEX_A15		0x410FC0F0


#define OMAP5_CORE_COUNT	0x2

/* SCU base address */

static void __iomem *scu_base;

static DEFINE_SPINLOCK(boot_lock);


void __iomem *omap4_get_scu_base(void) { return scu_base; }

Contributors

PersonTokensPropCommitsCommitProp
santosh shilimkarsantosh shilimkar12100.00%1100.00%
Total12100.00%1100.00%

#ifdef CONFIG_OMAP5_ERRATA_801819
void omap5_erratum_workaround_801819(void) { u32 acr, revidr; u32 acr_mask; /* REVIDR[3] indicates erratum fix available on silicon */ asm volatile ("mrc p15, 0, %0, c0, c0, 6" : "=r" (revidr)); if (revidr & (0x1 << 3)) return; asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr)); /* * BIT(27) - Disables streaming. All write-allocate lines allocate in * the L1 or L2 cache. * BIT(25) - Disables streaming. All write-allocate lines allocate in * the L1 cache. */ acr_mask = (0x3 << 25) | (0x3 << 27); /* do we already have it done.. if yes, skip expensive smc */ if ((acr & acr_mask) == acr_mask) return; acr |= acr_mask; omap_smc1(OMAP5_DRA7_MON_SET_ACR_INDEX, acr); pr_debug("%s: ARM erratum workaround 801819 applied on CPU%d\n", __func__, smp_processor_id()); }

Contributors

PersonTokensPropCommitsCommitProp
nishanth menonnishanth menon81100.00%1100.00%
Total81100.00%1100.00%

#else
static inline void omap5_erratum_workaround_801819(void) { }

Contributors

PersonTokensPropCommitsCommitProp
nishanth menonnishanth menon8100.00%1100.00%
Total8100.00%1100.00%

#endif
static void omap4_secondary_init(unsigned int cpu) { /* * Configure ACTRL and enable NS SMP bit access on CPU1 on HS device. * OMAP44XX EMU/HS devices - CPU0 SMP bit access is enabled in PPA * init and for CPU1, a secure PPA API provided. CPU0 must be ON * while executing NS_SMP API on CPU1 and PPA version must be 1.4.0+. * OMAP443X GP devices- SMP bit isn't accessible. * OMAP446X GP devices - SMP bit access is enabled on both CPUs. */ if (cpu_is_omap443x() && (omap_type() != OMAP2_DEVICE_TYPE_GP)) omap_secure_dispatcher(OMAP4_PPA_CPU_ACTRL_SMP_INDEX, 4, 0, 0, 0, 0, 0); if (soc_is_omap54xx() || soc_is_dra7xx()) { /* * Configure the CNTFRQ register for the secondary cpu's which * indicates the frequency of the cpu local timers. */ set_cntfreq(); /* Configure ACR to disable streaming WA for 801819 */ omap5_erratum_workaround_801819(); } /* * Synchronise with the boot thread. */ spin_lock(&boot_lock); spin_unlock(&boot_lock); }

Contributors

PersonTokensPropCommitsCommitProp
santosh shilimkarsantosh shilimkar5171.83%240.00%
r sricharanr sricharan1115.49%120.00%
nishanth menonnishanth menon79.86%120.00%
marc zyngiermarc zyngier22.82%120.00%
Total71100.00%5100.00%


static int omap4_boot_secondary(unsigned int cpu, struct task_struct *idle) { static struct clockdomain *cpu1_clkdm; static bool booted; static struct powerdomain *cpu1_pwrdm; void __iomem *base = omap_get_wakeupgen_base(); /* * Set synchronisation state between this boot processor * and the secondary one */ spin_lock(&boot_lock); /* * Update the AuxCoreBoot0 with boot state for secondary core. * omap4_secondary_startup() routine will hold the secondary core till * the AuxCoreBoot1 register is updated with cpu state * A barrier is added to ensure that write buffer is drained */ if (omap_secure_apis_support()) omap_modify_auxcoreboot0(0x200, 0xfffffdff); else writel_relaxed(0x20, base + OMAP_AUX_CORE_BOOT_0); if (!cpu1_clkdm && !cpu1_pwrdm) { cpu1_clkdm = clkdm_lookup("mpu1_clkdm"); cpu1_pwrdm = pwrdm_lookup("cpu1_pwrdm"); } /* * The SGI(Software Generated Interrupts) are not wakeup capable * from low power states. This is known limitation on OMAP4 and * needs to be worked around by using software forced clockdomain * wake-up. To wakeup CPU1, CPU0 forces the CPU1 clockdomain to * software force wakeup. The clockdomain is then put back to * hardware supervised mode. * More details can be found in OMAP4430 TRM - Version J * Section : * 4.3.4.2 Power States of CPU0 and CPU1 */ if (booted && cpu1_pwrdm && cpu1_clkdm) { /* * GIC distributor control register has changed between * CortexA9 r1pX and r2pX. The Control Register secure * banked version is now composed of 2 bits: * bit 0 == Secure Enable * bit 1 == Non-Secure Enable * The Non-Secure banked register has not changed * Because the ROM Code is based on the r1pX GIC, the CPU1 * GIC restoration will cause a problem to CPU0 Non-Secure SW. * The workaround must be: * 1) Before doing the CPU1 wakeup, CPU0 must disable * the GIC distributor * 2) CPU1 must re-enable the GIC distributor on * it's wakeup path. */ if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { local_irq_disable(); gic_dist_disable(); } /* * Ensure that CPU power state is set to ON to avoid CPU * powerdomain transition on wfi */ clkdm_wakeup_nolock(cpu1_clkdm); pwrdm_set_next_pwrst(cpu1_pwrdm, PWRDM_POWER_ON); clkdm_allow_idle_nolock(cpu1_clkdm); if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD)) { while (gic_dist_disabled()) { udelay(1); cpu_relax(); } gic_timer_retrigger(); local_irq_enable(); } } else { dsb_sev(); booted = true; } arch_send_wakeup_ipi_mask(cpumask_of(cpu)); /* * Now the secondary core is starting up let it run its * calibrations, then wait for it to finish */ spin_unlock(&boot_lock); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
santosh shilimkarsantosh shilimkar15478.57%861.54%
colin crosscolin cross3517.86%17.69%
grygorii strashkogrygorii strashko31.53%17.69%
marc zyngiermarc zyngier21.02%17.69%
victor kamenskyvictor kamensky10.51%17.69%
rob herringrob herring10.51%17.69%
Total196100.00%13100.00%

/* * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. */
static void __init omap4_smp_init_cpus(void) { unsigned int i = 0, ncores = 1, cpu_id; /* Use ARM cpuid check here, as SoC detection will not work so early */ cpu_id = read_cpuid_id() & CPU_MASK; if (cpu_id == CPU_CORTEX_A9) { /* * Currently we can't call ioremap here because * SoC detection won't work until after init_early. */ scu_base = OMAP2_L4_IO_ADDRESS(scu_a9_get_base()); BUG_ON(!scu_base); ncores = scu_get_core_count(scu_base); } else if (cpu_id == CPU_CORTEX_A15) { ncores = OMAP5_CORE_COUNT; } /* sanity check */ if (ncores > nr_cpu_ids) { pr_warn("SMP: %u cores greater than maximum (%u), clipping\n", ncores, nr_cpu_ids); ncores = nr_cpu_ids; } for (i = 0; i < ncores; i++) set_cpu_possible(i, true); }

Contributors

PersonTokensPropCommitsCommitProp
santosh shilimkarsantosh shilimkar6859.65%330.00%
russell kingrussell king2521.93%330.00%
tony lindgrentony lindgren1714.91%220.00%
marc zyngiermarc zyngier21.75%110.00%
uwe kleine-koeniguwe kleine-koenig21.75%110.00%
Total114100.00%10100.00%


static void __init omap4_smp_prepare_cpus(unsigned int max_cpus) { void *startup_addr = omap4_secondary_startup; void __iomem *base = omap_get_wakeupgen_base(); /* * Initialise the SCU and wake up the secondary core using * wakeup_secondary(). */ if (scu_base) scu_enable(scu_base); if (cpu_is_omap446x()) startup_addr = omap4460_secondary_startup; if (soc_is_dra74x() || soc_is_omap54xx()) omap5_erratum_workaround_801819(); /* * Write the address of secondary startup routine into the * AuxCoreBoot1 where ROM code will jump and start executing * on secondary core once out of WFE * A barrier is added to ensure that write buffer is drained */ if (omap_secure_apis_support()) omap_auxcoreboot_addr(virt_to_phys(startup_addr)); else /* * If the boot CPU is in HYP mode then start secondary * CPU in HYP mode as well. */ if ((__boot_cpu_mode & MODE_MASK) == HYP_MODE) writel_relaxed(virt_to_phys(omap5_secondary_hyp_startup), base + OMAP_AUX_CORE_BOOT_1); else writel_relaxed(virt_to_phys(omap5_secondary_startup), base + OMAP_AUX_CORE_BOOT_1); }

Contributors

PersonTokensPropCommitsCommitProp
santosh shilimkarsantosh shilimkar6763.21%444.44%
lennart sorensenlennart sorensen2422.64%111.11%
nishanth menonnishanth menon1110.38%111.11%
marc zyngiermarc zyngier21.89%111.11%
russell kingrussell king10.94%111.11%
victor kamenskyvictor kamensky10.94%111.11%
Total106100.00%9100.00%

const struct smp_operations omap4_smp_ops __initconst = { .smp_init_cpus = omap4_smp_init_cpus, .smp_prepare_cpus = omap4_smp_prepare_cpus, .smp_secondary_init = omap4_secondary_init, .smp_boot_secondary = omap4_boot_secondary, #ifdef CONFIG_HOTPLUG_CPU .cpu_die = omap4_cpu_die, #endif };

Overall Contributors

PersonTokensPropCommitsCommitProp
santosh shilimkarsantosh shilimkar41358.17%1336.11%
nishanth menonnishanth menon11416.06%12.78%
marc zyngiermarc zyngier456.34%12.78%
colin crosscolin cross354.93%12.78%
lennart sorensenlennart sorensen273.80%12.78%
tony lindgrentony lindgren273.80%719.44%
russell kingrussell king263.66%411.11%
r sricharanr sricharan111.55%12.78%
grygorii strashkogrygorii strashko30.42%12.78%
victor kamenskyvictor kamensky20.28%12.78%
masahiro yamadamasahiro yamada20.28%12.78%
uwe kleine-koeniguwe kleine-koenig20.28%12.78%
rob herringrob herring20.28%25.56%
anoop thomas mathewanoop thomas mathew10.14%12.78%
Total710100.00%36100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}