Release 4.7 arch/x86/include/asm/thread_info.h

/* thread_info.h: low-level thread information
 *
 * Copyright (C) 2002  David Howells (dhowells@redhat.com)
 * - Incorporating suggestions made by Linus Torvalds and Dave Miller
 */

#ifndef _ASM_X86_THREAD_INFO_H

#define _ASM_X86_THREAD_INFO_H

#include <linux/compiler.h>
#include <asm/page.h>
#include <asm/percpu.h>
#include <asm/types.h>

/*
 * TOP_OF_KERNEL_STACK_PADDING is a number of unused bytes that we
 * reserve at the top of the kernel stack.  We do it because of a nasty
 * 32-bit corner case.  On x86_32, the hardware stack frame is
 * variable-length.  Except for vm86 mode, struct pt_regs assumes a
 * maximum-length frame.  If we enter from CPL 0, the top 8 bytes of
 * pt_regs don't actually exist.  Ordinarily this doesn't matter, but it
 * does in at least one case:
 *
 * If we take an NMI early enough in SYSENTER, then we can end up with
 * pt_regs that extends above sp0.  On the way out, in the espfix code,
 * we can read the saved SS value, but that value will be above sp0.
 * Without this offset, that can result in a page fault.  (We are
 * careful that, in this case, the value we read doesn't matter.)
 *
 * In vm86 mode, the hardware frame is much longer still, so add 16
 * bytes to make room for the real-mode segments.
 *
 * x86_64 has a fixed-length stack frame.
 */
#ifdef CONFIG_X86_32
# ifdef CONFIG_VM86

#  define TOP_OF_KERNEL_STACK_PADDING 16
# else

#  define TOP_OF_KERNEL_STACK_PADDING 8
# endif
#else

# define TOP_OF_KERNEL_STACK_PADDING 0
#endif

/*
 * low level task data that entry.S needs immediate access to
 * - this struct should fit entirely inside of one cache line
 * - this struct shares the supervisor stack pages
 */
#ifndef __ASSEMBLY__
struct task_struct;
#include <asm/cpufeature.h>
#include <linux/atomic.h>


struct thread_info {
	
struct task_struct	*task;		/* main task structure */
	
__u32			flags;		/* low level flags */
	
__u32			status;		/* thread synchronous flags */
	
__u32			cpu;		/* current CPU */
	
mm_segment_t		addr_limit;
	
unsigned int		sig_on_uaccess_error:1;
	
unsigned int		uaccess_err:1;	/* uaccess failed */
};


#define INIT_THREAD_INFO(tsk)			\
{                                               \
        .task           = &tsk,                 \
        .flags          = 0,                    \
        .cpu            = 0,                    \
        .addr_limit     = KERNEL_DS,            \
}


#define init_thread_info	(init_thread_union.thread_info)

#define init_stack		(init_thread_union.stack)

#else /* !__ASSEMBLY__ */

#include <asm/asm-offsets.h>

#endif

/*
 * thread information flags
 * - these are process state flags that various assembly files
 *   may need to access
 * - pending work-to-be-done flags are in LSW
 * - other flags in MSW
 * Warning: layout of LSW is hardcoded in entry.S
 */

#define TIF_SYSCALL_TRACE	0	
/* syscall trace active */

#define TIF_NOTIFY_RESUME	1	
/* callback before returning to user */

#define TIF_SIGPENDING		2	
/* signal pending */

#define TIF_NEED_RESCHED	3	
/* rescheduling necessary */

#define TIF_SINGLESTEP		4	
/* reenable singlestep on user return*/

#define TIF_SYSCALL_EMU		6	
/* syscall emulation active */

#define TIF_SYSCALL_AUDIT	7	
/* syscall auditing active */

#define TIF_SECCOMP		8	
/* secure computing */

#define TIF_USER_RETURN_NOTIFY	11	
/* notify kernel of userspace return */

#define TIF_UPROBE		12	
/* breakpointed or singlestepping */

#define TIF_NOTSC		16	
/* TSC is not accessible in userland */

#define TIF_IA32		17	
/* IA32 compatibility process */

#define TIF_FORK		18	
/* ret_from_fork */

#define TIF_NOHZ		19	
/* in adaptive nohz mode */

#define TIF_MEMDIE		20	
/* is terminating due to OOM killer */

#define TIF_POLLING_NRFLAG	21	
/* idle is polling for TIF_NEED_RESCHED */

#define TIF_IO_BITMAP		22	
/* uses I/O bitmap */

#define TIF_FORCED_TF		24	
/* true if TF in eflags artificially */

#define TIF_BLOCKSTEP		25	
/* set when we want DEBUGCTLMSR_BTF */

#define TIF_LAZY_MMU_UPDATES	27	
/* task is updating the mmu lazily */

#define TIF_SYSCALL_TRACEPOINT	28	
/* syscall tracepoint instrumentation */

#define TIF_ADDR32		29	
/* 32-bit address space on 64 bits */

#define TIF_X32			30	
/* 32-bit native x86-64 binary */


#define _TIF_SYSCALL_TRACE	(1 << TIF_SYSCALL_TRACE)

#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)

#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)

#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)

#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)

#define _TIF_SYSCALL_EMU	(1 << TIF_SYSCALL_EMU)

#define _TIF_SYSCALL_AUDIT	(1 << TIF_SYSCALL_AUDIT)

#define _TIF_SECCOMP		(1 << TIF_SECCOMP)

#define _TIF_USER_RETURN_NOTIFY	(1 << TIF_USER_RETURN_NOTIFY)

#define _TIF_UPROBE		(1 << TIF_UPROBE)

#define _TIF_NOTSC		(1 << TIF_NOTSC)

#define _TIF_IA32		(1 << TIF_IA32)

#define _TIF_FORK		(1 << TIF_FORK)

#define _TIF_NOHZ		(1 << TIF_NOHZ)

#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)

#define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)

#define _TIF_FORCED_TF		(1 << TIF_FORCED_TF)

#define _TIF_BLOCKSTEP		(1 << TIF_BLOCKSTEP)

#define _TIF_LAZY_MMU_UPDATES	(1 << TIF_LAZY_MMU_UPDATES)

#define _TIF_SYSCALL_TRACEPOINT	(1 << TIF_SYSCALL_TRACEPOINT)

#define _TIF_ADDR32		(1 << TIF_ADDR32)

#define _TIF_X32		(1 << TIF_X32)

/*
 * work to do in syscall_trace_enter().  Also includes TIF_NOHZ for
 * enter_from_user_mode()
 */

#define _TIF_WORK_SYSCALL_ENTRY	\
	(_TIF_SYSCALL_TRACE | _TIF_SYSCALL_EMU | _TIF_SYSCALL_AUDIT |   \
         _TIF_SECCOMP | _TIF_SYSCALL_TRACEPOINT |       \
         _TIF_NOHZ)

/* work to do on any return to user space */

#define _TIF_ALLWORK_MASK						\
	((0x0000FFFF & ~_TIF_SECCOMP) | _TIF_SYSCALL_TRACEPOINT |       \
        _TIF_NOHZ)

/* flags to check in __switch_to() */

#define _TIF_WORK_CTXSW							\
	(_TIF_IO_BITMAP|_TIF_NOTSC|_TIF_BLOCKSTEP)


#define _TIF_WORK_CTXSW_PREV (_TIF_WORK_CTXSW|_TIF_USER_RETURN_NOTIFY)

#define _TIF_WORK_CTXSW_NEXT (_TIF_WORK_CTXSW)


#define STACK_WARN		(THREAD_SIZE/8)

/*
 * macros/functions for gaining access to the thread information structure
 *
 * preempt_count needs to be 1 initially, until the scheduler is functional.
 */
#ifndef __ASSEMBLY__



static inline struct thread_info *current_thread_info(void)
{
	return (struct thread_info *)(current_top_of_stack() - THREAD_SIZE);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
christoph lameter
christoph lameter
19
79.17%
1
33.33%
andy lutomirski
andy lutomirski
5
20.83%
2
66.67%
Total
24
100.00%
3
100.00%



static inline unsigned long current_stack_pointer(void)
{
	unsigned long sp;
#ifdef CONFIG_X86_64
	asm("mov %%rsp,%0" : "=g" (sp));
#else
	asm("mov %%esp,%0" : "=g" (sp));
#endif
	return sp;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
andy lutomirski
andy lutomirski
26
100.00%
1
100.00%
Total
26
100.00%
1
100.00%

#else /* !__ASSEMBLY__ */

#ifdef CONFIG_X86_64

# define cpu_current_top_of_stack (cpu_tss + TSS_sp0)
#endif

/* Load thread_info address into "reg" */

#define GET_THREAD_INFO(reg) \
	_ASM_MOV PER_CPU_VAR(cpu_current_top_of_stack),reg ; \
        _ASM_SUB $(THREAD_SIZE),reg ;

/*
 * ASM operand which evaluates to a 'thread_info' address of
 * the current task, if it is known that "reg" is exactly "off"
 * bytes below the top of the stack currently.
 *
 * ( The kernel stack's size is known at build time, it is usually
 *   2 or 4 pages, and the bottom  of the kernel stack contains
 *   the thread_info structure. So to access the thread_info very
 *   quickly from assembly code we can calculate down from the
 *   top of the kernel stack to the bottom, using constant,
 *   build-time calculations only. )
 *
 * For example, to fetch the current thread_info->flags value into %eax
 * on x86-64 defconfig kernels, in syscall entry code where RSP is
 * currently at exactly SIZEOF_PTREGS bytes away from the top of the
 * stack:
 *
 *      mov ASM_THREAD_INFO(TI_flags, %rsp, SIZEOF_PTREGS), %eax
 *
 * will translate to:
 *
 *      8b 84 24 b8 c0 ff ff      mov    -0x3f48(%rsp), %eax
 *
 * which is below the current RSP by almost 16K.
 */

#define ASM_THREAD_INFO(field, reg, off) ((field)+(off)-THREAD_SIZE)(reg)

#endif

/*
 * Thread-synchronous status.
 *
 * This is different from the flags in that nobody else
 * ever touches our thread-synchronous status, so we don't
 * have to worry about atomic accesses.
 */

#define TS_COMPAT		0x0002	
/* 32bit syscall active (64BIT)*/

#define TS_RESTORE_SIGMASK	0x0008	
/* restore signal mask in do_signal() */

#ifndef __ASSEMBLY__

#define HAVE_SET_RESTORE_SIGMASK	1


static inline void set_restore_sigmask(void)
{
	struct thread_info *ti = current_thread_info();
	ti->status |= TS_RESTORE_SIGMASK;
	WARN_ON(!test_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags));
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
ingo molnar
ingo molnar
32
76.19%
1
33.33%
thomas gleixner
thomas gleixner
5
11.90%
1
33.33%
al viro
al viro
5
11.90%
1
33.33%
Total
42
100.00%
3
100.00%



static inline void clear_restore_sigmask(void)
{
	current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
al viro
al viro
17
100.00%
1
100.00%
Total
17
100.00%
1
100.00%



static inline bool test_restore_sigmask(void)
{
	return current_thread_info()->status & TS_RESTORE_SIGMASK;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
al viro
al viro
17
100.00%
1
100.00%
Total
17
100.00%
1
100.00%



static inline bool test_and_clear_restore_sigmask(void)
{
	struct thread_info *ti = current_thread_info();
	if (!(ti->status & TS_RESTORE_SIGMASK))
		return false;
	ti->status &= ~TS_RESTORE_SIGMASK;
	return true;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
al viro
al viro
41
100.00%
1
100.00%
Total
41
100.00%
1
100.00%



static inline bool in_ia32_syscall(void)
{
#ifdef CONFIG_X86_32
	return true;
#endif
#ifdef CONFIG_IA32_EMULATION
	if (current_thread_info()->status & TS_COMPAT)
		return true;
#endif
	return false;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
srikar dronamraju
srikar dronamraju
36
97.30%
1
50.00%
dmitry safonov
dmitry safonov
1
2.70%
1
50.00%
Total
37
100.00%
2
100.00%

/*
 * Force syscall return via IRET by making it look as if there was
 * some work pending. IRET is our most capable (but slowest) syscall
 * return path, which is able to restore modified SS, CS and certain
 * EFLAGS values that other (fast) syscall return instructions
 * are not able to restore properly.
 */

#define force_iret() set_thread_flag(TIF_NOTIFY_RESUME)

extern void arch_task_cache_init(void);
extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
extern void arch_release_task_struct(struct task_struct *tsk);
#endif	/* !__ASSEMBLY__ */

#endif /* _ASM_X86_THREAD_INFO_H */
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
christoph lameter
christoph lameter
227
34.34%
7
12.73%
al viro
al viro
80
12.10%
2
3.64%
andy lutomirski
andy lutomirski
56
8.47%
7
12.73%
ingo molnar
ingo molnar
46
6.96%
3
5.45%
srikar dronamraju
srikar dronamraju
45
6.81%
2
3.64%
suresh siddha
suresh siddha
31
4.69%
1
1.82%
thomas gleixner
thomas gleixner
23
3.48%
3
5.45%
h. peter anvin
h. peter anvin
22
3.33%
3
5.45%
peter zijlstra
peter zijlstra
20
3.03%
3
5.45%
brian gerst
brian gerst
18
2.72%
2
3.64%
denys vlasenko
denys vlasenko
16
2.42%
2
3.64%
frederic weisbecker
frederic weisbecker
16
2.42%
3
5.45%
roland mcgrath
roland mcgrath
13
1.97%
2
3.64%
avi kivity
avi kivity
10
1.51%
1
1.82%
jeremy fitzhardinge
jeremy fitzhardinge
10
1.51%
2
3.64%
jan beulich
jan beulich
7
1.06%
1
1.82%
josh stone
josh stone
5
0.76%
1
1.82%
steven rostedt
steven rostedt
4
0.61%
1
1.82%
hiroshi shimamoto
hiroshi shimamoto
3
0.45%
1
1.82%
borislav petkov
borislav petkov
2
0.30%
2
3.64%
anton vorontsov
anton vorontsov
2
0.30%
1
1.82%
andreas dilger
andreas dilger
1
0.15%
1
1.82%
oleg nesterov
oleg nesterov
1
0.15%
1
1.82%
joe korty
joe korty
1
0.15%
1
1.82%
dmitry safonov
dmitry safonov
1
0.15%
1
1.82%
arun sharma
arun sharma
1
0.15%
1
1.82%
Total
661
100.00%
55
100.00%
  
Directory: arch/x86/include/asm

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.