Release 4.7 drivers/acpi/acpica/dsfield.c

/******************************************************************************
 *
 * Module Name: dsfield - Dispatcher field routines
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2016, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#include <acpi/acpi.h>
#include "accommon.h"
#include "amlcode.h"
#include "acdispat.h"
#include "acinterp.h"
#include "acnamesp.h"
#include "acparser.h"


#define _COMPONENT          ACPI_DISPATCHER
ACPI_MODULE_NAME("dsfield")

/* Local prototypes */
#ifdef ACPI_ASL_COMPILER
#include "acdisasm.h"
static acpi_status
acpi_ds_create_external_region(acpi_status lookup_status,
			       union acpi_parse_object *op,
			       char *path,
			       struct acpi_walk_state *walk_state,
			       struct acpi_namespace_node **node);
#endif

static acpi_status
acpi_ds_get_field_names(struct acpi_create_field_info *info,
			struct acpi_walk_state *walk_state,
			union acpi_parse_object *arg);

#ifdef ACPI_ASL_COMPILER
/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_create_external_region (iASL Disassembler only)
 *
 * PARAMETERS:  lookup_status   - Status from ns_lookup operation
 *              op              - Op containing the Field definition and args
 *              path            - Pathname of the region
 *  `           walk_state      - Current method state
 *              node            - Where the new region node is returned
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Add region to the external list if NOT_FOUND. Create a new
 *              region node/object.
 *
 ******************************************************************************/


static acpi_status

acpi_ds_create_external_region(acpi_status lookup_status,
			       union acpi_parse_object *op,
			       char *path,
			       struct acpi_walk_state *walk_state,
			       struct acpi_namespace_node **node)
{
	acpi_status status;
	union acpi_operand_object *obj_desc;

	if (lookup_status != AE_NOT_FOUND) {
		return (lookup_status);
	}

	/*
         * Table disassembly:
         * operation_region not found. Generate an External for it, and
         * insert the name into the namespace.
         */
	acpi_dm_add_op_to_external_list(op, path, ACPI_TYPE_REGION, 0, 0);

	status = acpi_ns_lookup(walk_state->scope_info, path, ACPI_TYPE_REGION,
				ACPI_IMODE_LOAD_PASS1, ACPI_NS_SEARCH_PARENT,
				walk_state, node);
	if (ACPI_FAILURE(status)) {
		return (status);
	}

	/* Must create and install a region object for the new node */

	obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_REGION);
	if (!obj_desc) {
		return (AE_NO_MEMORY);
	}

	obj_desc->region.node = *node;
	status = acpi_ns_attach_object(*node, obj_desc, ACPI_TYPE_REGION);
	return (status);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
robert moore
robert moore
145
100.00%
2
100.00%
Total
145
100.00%
2
100.00%

#endif

/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_create_buffer_field
 *
 * PARAMETERS:  op                  - Current parse op (create_XXField)
 *              walk_state          - Current state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Execute the create_field operators:
 *              create_bit_field_op,
 *              create_byte_field_op,
 *              create_word_field_op,
 *              create_dword_field_op,
 *              create_qword_field_op,
 *              create_field_op     (all of which define a field in a buffer)
 *
 ******************************************************************************/


acpi_status

acpi_ds_create_buffer_field(union acpi_parse_object *op,
			    struct acpi_walk_state *walk_state)
{
	union acpi_parse_object *arg;
	struct acpi_namespace_node *node;
	acpi_status status;
	union acpi_operand_object *obj_desc;
	union acpi_operand_object *second_desc = NULL;
	u32 flags;

	ACPI_FUNCTION_TRACE(ds_create_buffer_field);

	/*
         * Get the name_string argument (name of the new buffer_field)
         */
	if (op->common.aml_opcode == AML_CREATE_FIELD_OP) {

		/* For create_field, name is the 4th argument */

		arg = acpi_ps_get_arg(op, 3);
	} else {
		/* For all other create_XXXField operators, name is the 3rd argument */

		arg = acpi_ps_get_arg(op, 2);
	}

	if (!arg) {
		return_ACPI_STATUS(AE_AML_NO_OPERAND);
	}

	if (walk_state->deferred_node) {
		node = walk_state->deferred_node;
		status = AE_OK;
	} else {
		/* Execute flag should always be set when this function is entered */

		if (!(walk_state->parse_flags & ACPI_PARSE_EXECUTE)) {
			return_ACPI_STATUS(AE_AML_INTERNAL);
		}

		/* Creating new namespace node, should not already exist */

		flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE |
		    ACPI_NS_ERROR_IF_FOUND;

		/*
                 * Mark node temporary if we are executing a normal control
                 * method. (Don't mark if this is a module-level code method)
                 */
		if (walk_state->method_node &&
		    !(walk_state->parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
			flags |= ACPI_NS_TEMPORARY;
		}

		/* Enter the name_string into the namespace */

		status = acpi_ns_lookup(walk_state->scope_info,
					arg->common.value.string, ACPI_TYPE_ANY,
					ACPI_IMODE_LOAD_PASS1, flags,
					walk_state, &node);
		if (ACPI_FAILURE(status)) {
			ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
			return_ACPI_STATUS(status);
		}
	}

	/*
         * We could put the returned object (Node) on the object stack for later,
         * but for now, we will put it in the "op" object that the parser uses,
         * so we can get it again at the end of this scope.
         */
	op->common.node = node;

	/*
         * If there is no object attached to the node, this node was just created
         * and we need to create the field object. Otherwise, this was a lookup
         * of an existing node and we don't want to create the field object again.
         */
	obj_desc = acpi_ns_get_attached_object(node);
	if (obj_desc) {
		return_ACPI_STATUS(AE_OK);
	}

	/*
         * The Field definition is not fully parsed at this time.
         * (We must save the address of the AML for the buffer and index operands)
         */

	/* Create the buffer field object */

	obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_BUFFER_FIELD);
	if (!obj_desc) {
		status = AE_NO_MEMORY;
		goto cleanup;
	}

	/*
         * Remember location in AML stream of the field unit opcode and operands
         * -- since the buffer and index operands must be evaluated.
         */
	second_desc = obj_desc->common.next_object;
	second_desc->extra.aml_start = op->named.data;
	second_desc->extra.aml_length = op->named.length;
	obj_desc->buffer_field.node = node;

	/* Attach constructed field descriptors to parent node */

	status = acpi_ns_attach_object(node, obj_desc, ACPI_TYPE_BUFFER_FIELD);
	if (ACPI_FAILURE(status)) {
		goto cleanup;
	}

cleanup:

	/* Remove local reference to the object */

	acpi_ut_remove_reference(obj_desc);
	return_ACPI_STATUS(status);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
linus torvalds
linus torvalds
141
40.06%
2
12.50%
andy grover
andy grover
88
25.00%
5
31.25%
pre-git
pre-git
63
17.90%
2
12.50%
robert moore
robert moore
29
8.24%
5
31.25%
len brown
len brown
21
5.97%
1
6.25%
lin ming
lin ming
10
2.84%
1
6.25%
Total
352
100.00%
16
100.00%

/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_get_field_names
 *
 * PARAMETERS:  info            - create_field info structure
 *  `           walk_state      - Current method state
 *              arg             - First parser arg for the field name list
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Process all named fields in a field declaration. Names are
 *              entered into the namespace.
 *
 ******************************************************************************/


static acpi_status

acpi_ds_get_field_names(struct acpi_create_field_info *info,
			struct acpi_walk_state *walk_state,
			union acpi_parse_object *arg)
{
	acpi_status status;
	u64 position;
	union acpi_parse_object *child;

	ACPI_FUNCTION_TRACE_PTR(ds_get_field_names, info);

	/* First field starts at bit zero */

	info->field_bit_position = 0;

	/* Process all elements in the field list (of parse nodes) */

	while (arg) {
		/*
                 * Four types of field elements are handled:
                 * 1) name - Enters a new named field into the namespace
                 * 2) offset - specifies a bit offset
                 * 3) access_as - changes the access mode/attributes
                 * 4) connection - Associate a resource template with the field
                 */
		switch (arg->common.aml_opcode) {
		case AML_INT_RESERVEDFIELD_OP:

			position = (u64)info->field_bit_position +
			    (u64)arg->common.value.size;

			if (position > ACPI_UINT32_MAX) {
				ACPI_ERROR((AE_INFO,
					    "Bit offset within field too large (> 0xFFFFFFFF)"));
				return_ACPI_STATUS(AE_SUPPORT);
			}

			info->field_bit_position = (u32) position;
			break;

		case AML_INT_ACCESSFIELD_OP:
		case AML_INT_EXTACCESSFIELD_OP:
			/*
                         * Get new access_type, access_attribute, and access_length fields
                         * -- to be used for all field units that follow, until the
                         * end-of-field or another access_as keyword is encountered.
                         * NOTE. These three bytes are encoded in the integer value
                         * of the parseop for convenience.
                         *
                         * In field_flags, preserve the flag bits other than the
                         * ACCESS_TYPE bits.
                         */

			/* access_type (byte_acc, word_acc, etc.) */

			info->field_flags = (u8)
			    ((info->
			      field_flags & ~(AML_FIELD_ACCESS_TYPE_MASK)) |
			     ((u8)((u32)(arg->common.value.integer & 0x07))));

			/* access_attribute (attrib_quick, attrib_byte, etc.) */

			info->attribute = (u8)
			    ((arg->common.value.integer >> 8) & 0xFF);

			/* access_length (for serial/buffer protocols) */

			info->access_length = (u8)
			    ((arg->common.value.integer >> 16) & 0xFF);
			break;

		case AML_INT_CONNECTION_OP:
			/*
                         * Clear any previous connection. New connection is used for all
                         * fields that follow, similar to access_as
                         */
			info->resource_buffer = NULL;
			info->connection_node = NULL;
			info->pin_number_index = 0;

			/*
                         * A Connection() is either an actual resource descriptor (buffer)
                         * or a named reference to a resource template
                         */
			child = arg->common.value.arg;
			if (child->common.aml_opcode == AML_INT_BYTELIST_OP) {
				info->resource_buffer = child->named.data;
				info->resource_length =
				    (u16)child->named.value.integer;
			} else {
				/* Lookup the Connection() namepath, it should already exist */

				status = acpi_ns_lookup(walk_state->scope_info,
							child->common.value.
							name, ACPI_TYPE_ANY,
							ACPI_IMODE_EXECUTE,
							ACPI_NS_DONT_OPEN_SCOPE,
							walk_state,
							&info->connection_node);
				if (ACPI_FAILURE(status)) {
					ACPI_ERROR_NAMESPACE(child->common.
							     value.name,
							     status);
					return_ACPI_STATUS(status);
				}
			}
			break;

		case AML_INT_NAMEDFIELD_OP:

			/* Lookup the name, it should already exist */

			status = acpi_ns_lookup(walk_state->scope_info,
						(char *)&arg->named.name,
						info->field_type,
						ACPI_IMODE_EXECUTE,
						ACPI_NS_DONT_OPEN_SCOPE,
						walk_state, &info->field_node);
			if (ACPI_FAILURE(status)) {
				ACPI_ERROR_NAMESPACE((char *)&arg->named.name,
						     status);
				return_ACPI_STATUS(status);
			} else {
				arg->common.node = info->field_node;
				info->field_bit_length = arg->common.value.size;

				/*
                                 * If there is no object attached to the node, this node was
                                 * just created and we need to create the field object.
                                 * Otherwise, this was a lookup of an existing node and we
                                 * don't want to create the field object again.
                                 */
				if (!acpi_ns_get_attached_object
				    (info->field_node)) {
					status = acpi_ex_prep_field_value(info);
					if (ACPI_FAILURE(status)) {
						return_ACPI_STATUS(status);
					}
				}
			}

			/* Keep track of bit position for the next field */

			position = (u64)info->field_bit_position +
			    (u64)arg->common.value.size;

			if (position > ACPI_UINT32_MAX) {
				ACPI_ERROR((AE_INFO,
					    "Field [%4.4s] bit offset too large (> 0xFFFFFFFF)",
					    ACPI_CAST_PTR(char,
							  &info->field_node->
							  name)));
				return_ACPI_STATUS(AE_SUPPORT);
			}

			info->field_bit_position += info->field_bit_length;
			info->pin_number_index++;	/* Index relative to previous Connection() */
			break;

		default:

			ACPI_ERROR((AE_INFO,
				    "Invalid opcode in field list: 0x%X",
				    arg->common.aml_opcode));
			return_ACPI_STATUS(AE_AML_BAD_OPCODE);
		}

		arg = arg->common.next;
	}

	return_ACPI_STATUS(AE_OK);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
robert moore
robert moore
211
36.25%
10
43.48%
andy grover
andy grover
169
29.04%
8
34.78%
pre-git
pre-git
111
19.07%
1
4.35%
linus torvalds
linus torvalds
79
13.57%
3
13.04%
lin ming
lin ming
12
2.06%
1
4.35%
Total
582
100.00%
23
100.00%

/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_create_field
 *
 * PARAMETERS:  op              - Op containing the Field definition and args
 *              region_node     - Object for the containing Operation Region
 *  `           walk_state      - Current method state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create a new field in the specified operation region
 *
 ******************************************************************************/


acpi_status

acpi_ds_create_field(union acpi_parse_object *op,
		     struct acpi_namespace_node *region_node,
		     struct acpi_walk_state *walk_state)
{
	acpi_status status;
	union acpi_parse_object *arg;
	struct acpi_create_field_info info;

	ACPI_FUNCTION_TRACE_PTR(ds_create_field, op);

	/* First arg is the name of the parent op_region (must already exist) */

	arg = op->common.value.arg;

	if (!region_node) {
		status =
		    acpi_ns_lookup(walk_state->scope_info,
				   arg->common.value.name, ACPI_TYPE_REGION,
				   ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
				   walk_state, &region_node);
#ifdef ACPI_ASL_COMPILER
		status = acpi_ds_create_external_region(status, arg,
							arg->common.value.name,
							walk_state,
							&region_node);
#endif
		if (ACPI_FAILURE(status)) {
			ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
			return_ACPI_STATUS(status);
		}
	}

	memset(&info, 0, sizeof(struct acpi_create_field_info));

	/* Second arg is the field flags */

	arg = arg->common.next;
	info.field_flags = (u8) arg->common.value.integer;
	info.attribute = 0;

	/* Each remaining arg is a Named Field */

	info.field_type = ACPI_TYPE_LOCAL_REGION_FIELD;
	info.region_node = region_node;

	status = acpi_ds_get_field_names(&info, walk_state, arg->common.next);
	return_ACPI_STATUS(status);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
linus torvalds
linus torvalds
114
52.53%
2
11.76%
robert moore
robert moore
43
19.82%
5
29.41%
andy grover
andy grover
43
19.82%
8
47.06%
pre-git
pre-git
17
7.83%
2
11.76%
Total
217
100.00%
17
100.00%

/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_init_field_objects
 *
 * PARAMETERS:  op              - Op containing the Field definition and args
 *  `           walk_state      - Current method state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: For each "Field Unit" name in the argument list that is
 *              part of the field declaration, enter the name into the
 *              namespace.
 *
 ******************************************************************************/


acpi_status

acpi_ds_init_field_objects(union acpi_parse_object *op,
			   struct acpi_walk_state *walk_state)
{
	acpi_status status;
	union acpi_parse_object *arg = NULL;
	struct acpi_namespace_node *node;
	u8 type = 0;
	u32 flags;

	ACPI_FUNCTION_TRACE_PTR(ds_init_field_objects, op);

	/* Execute flag should always be set when this function is entered */

	if (!(walk_state->parse_flags & ACPI_PARSE_EXECUTE)) {
		if (walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP) {

			/* bank_field Op is deferred, just return OK */

			return_ACPI_STATUS(AE_OK);
		}

		return_ACPI_STATUS(AE_AML_INTERNAL);
	}

	/*
         * Get the field_list argument for this opcode. This is the start of the
         * list of field elements.
         */
	switch (walk_state->opcode) {
	case AML_FIELD_OP:

		arg = acpi_ps_get_arg(op, 2);
		type = ACPI_TYPE_LOCAL_REGION_FIELD;
		break;

	case AML_BANK_FIELD_OP:

		arg = acpi_ps_get_arg(op, 4);
		type = ACPI_TYPE_LOCAL_BANK_FIELD;
		break;

	case AML_INDEX_FIELD_OP:

		arg = acpi_ps_get_arg(op, 3);
		type = ACPI_TYPE_LOCAL_INDEX_FIELD;
		break;

	default:

		return_ACPI_STATUS(AE_BAD_PARAMETER);
	}

	/* Creating new namespace node(s), should not already exist */

	flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE |
	    ACPI_NS_ERROR_IF_FOUND;

	/*
         * Mark node(s) temporary if we are executing a normal control
         * method. (Don't mark if this is a module-level code method)
         */
	if (walk_state->method_node &&
	    !(walk_state->parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
		flags |= ACPI_NS_TEMPORARY;
	}

	/*
         * Walk the list of entries in the field_list
         * Note: field_list can be of zero length. In this case, Arg will be NULL.
         */
	while (arg) {
		/*
                 * Ignore OFFSET/ACCESSAS/CONNECTION terms here; we are only interested
                 * in the field names in order to enter them into the namespace.
                 */
		if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) {
			status = acpi_ns_lookup(walk_state->scope_info,
						(char *)&arg->named.name, type,
						ACPI_IMODE_LOAD_PASS1, flags,
						walk_state, &node);
			if (ACPI_FAILURE(status)) {
				ACPI_ERROR_NAMESPACE((char *)&arg->named.name,
						     status);
				if (status != AE_ALREADY_EXISTS) {
					return_ACPI_STATUS(status);
				}

				/* Name already exists, just ignore this error */

				status = AE_OK;
			}

			arg->common.node = node;
		}

		/* Get the next field element in the list */

		arg = arg->common.next;
	}

	return_ACPI_STATUS(AE_OK);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
andy grover
andy grover
217
74.06%
7
50.00%
robert moore
robert moore
52
17.75%
5
35.71%
lin ming
lin ming
24
8.19%
2
14.29%
Total
293
100.00%
14
100.00%

/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_create_bank_field
 *
 * PARAMETERS:  op              - Op containing the Field definition and args
 *              region_node     - Object for the containing Operation Region
 *              walk_state      - Current method state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create a new bank field in the specified operation region
 *
 ******************************************************************************/


acpi_status

acpi_ds_create_bank_field(union acpi_parse_object *op,
			  struct acpi_namespace_node *region_node,
			  struct acpi_walk_state *walk_state)
{
	acpi_status status;
	union acpi_parse_object *arg;
	struct acpi_create_field_info info;

	ACPI_FUNCTION_TRACE_PTR(ds_create_bank_field, op);

	/* First arg is the name of the parent op_region (must already exist) */

	arg = op->common.value.arg;
	if (!region_node) {
		status =
		    acpi_ns_lookup(walk_state->scope_info,
				   arg->common.value.name, ACPI_TYPE_REGION,
				   ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
				   walk_state, &region_node);
#ifdef ACPI_ASL_COMPILER
		status = acpi_ds_create_external_region(status, arg,
							arg->common.value.name,
							walk_state,
							&region_node);
#endif
		if (ACPI_FAILURE(status)) {
			ACPI_ERROR_NAMESPACE(arg->common.value.name, status);
			return_ACPI_STATUS(status);
		}
	}

	/* Second arg is the Bank Register (Field) (must already exist) */

	arg = arg->common.next;
	status =
	    acpi_ns_lookup(walk_state->scope_info, arg->common.value.string,
			   ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
			   ACPI_NS_SEARCH_PARENT, walk_state,
			   &info.register_node);
	if (ACPI_FAILURE(status)) {
		ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
		return_ACPI_STATUS(status);
	}

	/*
         * Third arg is the bank_value
         * This arg is a term_arg, not a constant
         * It will be evaluated later, by acpi_ds_eval_bank_field_operands
         */
	arg = arg->common.next;

	/* Fourth arg is the field flags */

	arg = arg->common.next;
	info.field_flags = (u8) arg->common.value.integer;

	/* Each remaining arg is a Named Field */

	info.field_type = ACPI_TYPE_LOCAL_BANK_FIELD;
	info.region_node = region_node;

	/*
         * Use Info.data_register_node to store bank_field Op
         * It's safe because data_register_node will never be used when create
         * bank field \we store aml_start and aml_length in the bank_field Op for
         * late evaluation. Used in acpi_ex_prep_field_value(Info)
         *
         * TBD: Or, should we add a field in struct acpi_create_field_info, like
         * "void *ParentOp"?
         */
	info.data_register_node = (struct acpi_namespace_node *)op;

	status = acpi_ds_get_field_names(&info, walk_state, arg->common.next);
	return_ACPI_STATUS(status);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
127
44.72%
2
11.76%
andy grover
andy grover
59
20.77%
8
47.06%
linus torvalds
linus torvalds
55
19.37%
2
11.76%
robert moore
robert moore
31
10.92%
4
23.53%
lin ming
lin ming
12
4.23%
1
5.88%
Total
284
100.00%
17
100.00%

/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_create_index_field
 *
 * PARAMETERS:  op              - Op containing the Field definition and args
 *              region_node     - Object for the containing Operation Region
 *  `           walk_state      - Current method state
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Create a new index field in the specified operation region
 *
 ******************************************************************************/


acpi_status

acpi_ds_create_index_field(union acpi_parse_object *op,
			   struct acpi_namespace_node *region_node,
			   struct acpi_walk_state *walk_state)
{
	acpi_status status;
	union acpi_parse_object *arg;
	struct acpi_create_field_info info;

	ACPI_FUNCTION_TRACE_PTR(ds_create_index_field, op);

	/* First arg is the name of the Index register (must already exist) */

	arg = op->common.value.arg;
	status =
	    acpi_ns_lookup(walk_state->scope_info, arg->common.value.string,
			   ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
			   ACPI_NS_SEARCH_PARENT, walk_state,
			   &info.register_node);
	if (ACPI_FAILURE(status)) {
		ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
		return_ACPI_STATUS(status);
	}

	/* Second arg is the data register (must already exist) */

	arg = arg->common.next;
	status =
	    acpi_ns_lookup(walk_state->scope_info, arg->common.value.string,
			   ACPI_TYPE_ANY, ACPI_IMODE_EXECUTE,
			   ACPI_NS_SEARCH_PARENT, walk_state,
			   &info.data_register_node);
	if (ACPI_FAILURE(status)) {
		ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
		return_ACPI_STATUS(status);
	}

	/* Next arg is the field flags */

	arg = arg->common.next;
	info.field_flags = (u8) arg->common.value.integer;

	/* Each remaining arg is a Named Field */

	info.field_type = ACPI_TYPE_LOCAL_INDEX_FIELD;
	info.region_node = region_node;

	status = acpi_ds_get_field_names(&info, walk_state, arg->common.next);
	return_ACPI_STATUS(status);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
127
54.98%
2
14.29%
andy grover
andy grover
55
23.81%
7
50.00%
linus torvalds
linus torvalds
46
19.91%
3
21.43%
robert moore
robert moore
3
1.30%
2
14.29%
Total
231
100.00%
14
100.00%

Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
andy grover
andy grover
633
28.72%
10
26.32%
robert moore
robert moore
586
26.59%
18
47.37%
pre-git
pre-git
461
20.92%
2
5.26%
linus torvalds
linus torvalds
438
19.87%
3
7.89%
lin ming
lin ming
58
2.63%
2
5.26%
len brown
len brown
27
1.23%
2
5.26%
patrick mochel
patrick mochel
1
0.05%
1
2.63%
Total
2204
100.00%
38
100.00%
  
Directory: drivers/acpi/acpica

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.