Release 4.7 drivers/acpi/acpica/dswload.c
  
  
/******************************************************************************
 *
 * Module Name: dswload - Dispatcher first pass namespace load callbacks
 *
 *****************************************************************************/
/*
 * Copyright (C) 2000 - 2016, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */
#include <acpi/acpi.h>
#include "accommon.h"
#include "acparser.h"
#include "amlcode.h"
#include "acdispat.h"
#include "acinterp.h"
#include "acnamesp.h"
#ifdef ACPI_ASL_COMPILER
#include "acdisasm.h"
#endif
#define _COMPONENT          ACPI_DISPATCHER
ACPI_MODULE_NAME("dswload")
/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_init_callbacks
 *
 * PARAMETERS:  walk_state      - Current state of the parse tree walk
 *              pass_number     - 1, 2, or 3
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Init walk state callbacks
 *
 ******************************************************************************/
acpi_status
acpi_ds_init_callbacks(struct acpi_walk_state *walk_state, u32 pass_number)
{
	switch (pass_number) {
	case 0:
		/* Parse only - caller will setup callbacks */
		walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
		    ACPI_PARSE_DELETE_TREE | ACPI_PARSE_DISASSEMBLE;
		walk_state->descending_callback = NULL;
		walk_state->ascending_callback = NULL;
		break;
	case 1:
		/* Load pass 1 */
		walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
		    ACPI_PARSE_DELETE_TREE;
		walk_state->descending_callback = acpi_ds_load1_begin_op;
		walk_state->ascending_callback = acpi_ds_load1_end_op;
		break;
	case 2:
		/* Load pass 2 */
		walk_state->parse_flags = ACPI_PARSE_LOAD_PASS1 |
		    ACPI_PARSE_DELETE_TREE;
		walk_state->descending_callback = acpi_ds_load2_begin_op;
		walk_state->ascending_callback = acpi_ds_load2_end_op;
		break;
	case 3:
		/* Execution pass */
#ifndef ACPI_NO_METHOD_EXECUTION
		walk_state->parse_flags |= ACPI_PARSE_EXECUTE |
		    ACPI_PARSE_DELETE_TREE;
		walk_state->descending_callback = acpi_ds_exec_begin_op;
		walk_state->ascending_callback = acpi_ds_exec_end_op;
#endif
		break;
	default:
		return (AE_BAD_PARAMETER);
	}
	return (AE_OK);
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| linus torvalds | linus torvalds | 101 | 73.72% | 1 | 25.00% | 
| robert moore | robert moore | 30 | 21.90% | 1 | 25.00% | 
| andy grover | andy grover | 6 | 4.38% | 2 | 50.00% | 
 | Total | 137 | 100.00% | 4 | 100.00% | 
/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_load1_begin_op
 *
 * PARAMETERS:  walk_state      - Current state of the parse tree walk
 *              out_op          - Where to return op if a new one is created
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Descending callback used during the loading of ACPI tables.
 *
 ******************************************************************************/
acpi_status
acpi_ds_load1_begin_op(struct acpi_walk_state *walk_state,
		       union acpi_parse_object **out_op)
{
	union acpi_parse_object *op;
	struct acpi_namespace_node *node;
	acpi_status status;
	acpi_object_type object_type;
	char *path;
	u32 flags;
	ACPI_FUNCTION_TRACE(ds_load1_begin_op);
	op = walk_state->op;
	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
			  walk_state));
	/* We are only interested in opcodes that have an associated name */
	if (op) {
		if (!(walk_state->op_info->flags & AML_NAMED)) {
			*out_op = op;
			return_ACPI_STATUS(AE_OK);
		}
		/* Check if this object has already been installed in the namespace */
		if (op->common.node) {
			*out_op = op;
			return_ACPI_STATUS(AE_OK);
		}
	}
	path = acpi_ps_get_next_namestring(&walk_state->parser_state);
	/* Map the raw opcode into an internal object type */
	object_type = walk_state->op_info->object_type;
	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
			  "State=%p Op=%p [%s]\n", walk_state, op,
			  acpi_ut_get_type_name(object_type)));
	switch (walk_state->opcode) {
	case AML_SCOPE_OP:
		/*
                 * The target name of the Scope() operator must exist at this point so
                 * that we can actually open the scope to enter new names underneath it.
                 * Allow search-to-root for single namesegs.
                 */
		status =
		    acpi_ns_lookup(walk_state->scope_info, path, object_type,
				   ACPI_IMODE_EXECUTE, ACPI_NS_SEARCH_PARENT,
				   walk_state, &(node));
#ifdef ACPI_ASL_COMPILER
		if (status == AE_NOT_FOUND) {
			/*
                         * Table disassembly:
                         * Target of Scope() not found. Generate an External for it, and
                         * insert the name into the namespace.
                         */
			acpi_dm_add_op_to_external_list(op, path,
							ACPI_TYPE_DEVICE, 0, 0);
			status =
			    acpi_ns_lookup(walk_state->scope_info, path,
					   object_type, ACPI_IMODE_LOAD_PASS1,
					   ACPI_NS_SEARCH_PARENT, walk_state,
					   &node);
		}
#endif
		if (ACPI_FAILURE(status)) {
			ACPI_ERROR_NAMESPACE(path, status);
			return_ACPI_STATUS(status);
		}
		/*
                 * Check to make sure that the target is
                 * one of the opcodes that actually opens a scope
                 */
		switch (node->type) {
		case ACPI_TYPE_ANY:
		case ACPI_TYPE_LOCAL_SCOPE:	/* Scope  */
		case ACPI_TYPE_DEVICE:
		case ACPI_TYPE_POWER:
		case ACPI_TYPE_PROCESSOR:
		case ACPI_TYPE_THERMAL:
			/* These are acceptable types */
			break;
		case ACPI_TYPE_INTEGER:
		case ACPI_TYPE_STRING:
		case ACPI_TYPE_BUFFER:
			/*
                         * These types we will allow, but we will change the type.
                         * This enables some existing code of the form:
                         *
                         *  Name (DEB, 0)
                         *  Scope (DEB) { ... }
                         *
                         * Note: silently change the type here. On the second pass,
                         * we will report a warning
                         */
			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
					  "Type override - [%4.4s] had invalid type (%s) "
					  "for Scope operator, changed to type ANY\n",
					  acpi_ut_get_node_name(node),
					  acpi_ut_get_type_name(node->type)));
			node->type = ACPI_TYPE_ANY;
			walk_state->scope_info->common.value = ACPI_TYPE_ANY;
			break;
		case ACPI_TYPE_METHOD:
			/*
                         * Allow scope change to root during execution of module-level
                         * code. Root is typed METHOD during this time.
                         */
			if ((node == acpi_gbl_root_node) &&
			    (walk_state->
			     parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
				break;
			}
			/*lint -fallthrough */
		default:
			/* All other types are an error */
			ACPI_ERROR((AE_INFO,
				    "Invalid type (%s) for target of "
				    "Scope operator [%4.4s] (Cannot override)",
				    acpi_ut_get_type_name(node->type),
				    acpi_ut_get_node_name(node)));
			return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
		}
		break;
	default:
		/*
                 * For all other named opcodes, we will enter the name into
                 * the namespace.
                 *
                 * Setup the search flags.
                 * Since we are entering a name into the namespace, we do not want to
                 * enable the search-to-root upsearch.
                 *
                 * There are only two conditions where it is acceptable that the name
                 * already exists:
                 *    1) the Scope() operator can reopen a scoping object that was
                 *       previously defined (Scope, Method, Device, etc.)
                 *    2) Whenever we are parsing a deferred opcode (op_region, Buffer,
                 *       buffer_field, or Package), the name of the object is already
                 *       in the namespace.
                 */
		if (walk_state->deferred_node) {
			/* This name is already in the namespace, get the node */
			node = walk_state->deferred_node;
			status = AE_OK;
			break;
		}
		/*
                 * If we are executing a method, do not create any namespace objects
                 * during the load phase, only during execution.
                 */
		if (walk_state->method_node) {
			node = NULL;
			status = AE_OK;
			break;
		}
		flags = ACPI_NS_NO_UPSEARCH;
		if ((walk_state->opcode != AML_SCOPE_OP) &&
		    (!(walk_state->parse_flags & ACPI_PARSE_DEFERRED_OP))) {
			if (walk_state->namespace_override) {
				flags |= ACPI_NS_OVERRIDE_IF_FOUND;
				ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
						  "[%s] Override allowed\n",
						  acpi_ut_get_type_name
						  (object_type)));
			} else {
				flags |= ACPI_NS_ERROR_IF_FOUND;
				ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
						  "[%s] Cannot already exist\n",
						  acpi_ut_get_type_name
						  (object_type)));
			}
		} else {
			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
					  "[%s] Both Find or Create allowed\n",
					  acpi_ut_get_type_name(object_type)));
		}
		/*
                 * Enter the named type into the internal namespace. We enter the name
                 * as we go downward in the parse tree. Any necessary subobjects that
                 * involve arguments to the opcode must be created as we go back up the
                 * parse tree later.
                 */
		status =
		    acpi_ns_lookup(walk_state->scope_info, path, object_type,
				   ACPI_IMODE_LOAD_PASS1, flags, walk_state,
				   &node);
		if (ACPI_FAILURE(status)) {
			if (status == AE_ALREADY_EXISTS) {
				/* The name already exists in this scope */
				if (node->flags & ANOBJ_IS_EXTERNAL) {
					/*
                                         * Allow one create on an object or segment that was
                                         * previously declared External
                                         */
					node->flags &= ~ANOBJ_IS_EXTERNAL;
					node->type = (u8) object_type;
					/* Just retyped a node, probably will need to open a scope */
					if (acpi_ns_opens_scope(object_type)) {
						status =
						    acpi_ds_scope_stack_push
						    (node, object_type,
						     walk_state);
						if (ACPI_FAILURE(status)) {
							return_ACPI_STATUS
							    (status);
						}
					}
					status = AE_OK;
				}
			}
			if (ACPI_FAILURE(status)) {
				ACPI_ERROR_NAMESPACE(path, status);
				return_ACPI_STATUS(status);
			}
		}
		break;
	}
	/* Common exit */
	if (!op) {
		/* Create a new op */
		op = acpi_ps_alloc_op(walk_state->opcode, walk_state->aml);
		if (!op) {
			return_ACPI_STATUS(AE_NO_MEMORY);
		}
	}
	/* Initialize the op */
#if (defined (ACPI_NO_METHOD_EXECUTION) || defined (ACPI_CONSTANT_EVAL_ONLY))
	op->named.path = ACPI_CAST_PTR(u8, path);
#endif
	if (node) {
		/*
                 * Put the Node in the "op" object that the parser uses, so we
                 * can get it again quickly when this scope is closed
                 */
		op->common.node = node;
		op->named.name = node->name.integer;
	}
	acpi_ps_append_arg(acpi_ps_get_parent_scope(&walk_state->parser_state),
			   op);
	*out_op = op;
	return_ACPI_STATUS(status);
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| andy grover | andy grover | 243 | 31.76% | 9 | 27.27% | 
| robert moore | robert moore | 211 | 27.58% | 12 | 36.36% | 
| pre-git | pre-git | 126 | 16.47% | 2 | 6.06% | 
| len brown | len brown | 81 | 10.59% | 4 | 12.12% | 
| linus torvalds | linus torvalds | 69 | 9.02% | 3 | 9.09% | 
| lv zheng | lv zheng | 35 | 4.58% | 3 | 9.09% | 
 | Total | 765 | 100.00% | 33 | 100.00% | 
/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_load1_end_op
 *
 * PARAMETERS:  walk_state      - Current state of the parse tree walk
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Ascending callback used during the loading of the namespace,
 *              both control methods and everything else.
 *
 ******************************************************************************/
acpi_status acpi_ds_load1_end_op(struct acpi_walk_state *walk_state)
{
	union acpi_parse_object *op;
	acpi_object_type object_type;
	acpi_status status = AE_OK;
	ACPI_FUNCTION_TRACE(ds_load1_end_op);
	op = walk_state->op;
	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
			  walk_state));
	/* We are only interested in opcodes that have an associated name */
	if (!(walk_state->op_info->flags & (AML_NAMED | AML_FIELD))) {
		return_ACPI_STATUS(AE_OK);
	}
	/* Get the object type to determine if we should pop the scope */
	object_type = walk_state->op_info->object_type;
#ifndef ACPI_NO_METHOD_EXECUTION
	if (walk_state->op_info->flags & AML_FIELD) {
		/*
                 * If we are executing a method, do not create any namespace objects
                 * during the load phase, only during execution.
                 */
		if (!walk_state->method_node) {
			if (walk_state->opcode == AML_FIELD_OP ||
			    walk_state->opcode == AML_BANK_FIELD_OP ||
			    walk_state->opcode == AML_INDEX_FIELD_OP) {
				status =
				    acpi_ds_init_field_objects(op, walk_state);
			}
		}
		return_ACPI_STATUS(status);
	}
	/*
         * If we are executing a method, do not create any namespace objects
         * during the load phase, only during execution.
         */
	if (!walk_state->method_node) {
		if (op->common.aml_opcode == AML_REGION_OP) {
			status =
			    acpi_ex_create_region(op->named.data,
						  op->named.length,
						  (acpi_adr_space_type)
						  ((op->common.value.arg)->
						   common.value.integer),
						  walk_state);
			if (ACPI_FAILURE(status)) {
				return_ACPI_STATUS(status);
			}
		} else if (op->common.aml_opcode == AML_DATA_REGION_OP) {
			status =
			    acpi_ex_create_region(op->named.data,
						  op->named.length,
						  ACPI_ADR_SPACE_DATA_TABLE,
						  walk_state);
			if (ACPI_FAILURE(status)) {
				return_ACPI_STATUS(status);
			}
		}
	}
#endif
	if (op->common.aml_opcode == AML_NAME_OP) {
		/* For Name opcode, get the object type from the argument */
		if (op->common.value.arg) {
			object_type = (acpi_ps_get_opcode_info((op->common.
								value.arg)->
							       common.
							       aml_opcode))->
			    object_type;
			/* Set node type if we have a namespace node */
			if (op->common.node) {
				op->common.node->type = (u8) object_type;
			}
		}
	}
	/*
         * If we are executing a method, do not create any namespace objects
         * during the load phase, only during execution.
         */
	if (!walk_state->method_node) {
		if (op->common.aml_opcode == AML_METHOD_OP) {
			/*
                         * method_op pkg_length name_string method_flags term_list
                         *
                         * Note: We must create the method node/object pair as soon as we
                         * see the method declaration. This allows later pass1 parsing
                         * of invocations of the method (need to know the number of
                         * arguments.)
                         */
			ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
					  "LOADING-Method: State=%p Op=%p NamedObj=%p\n",
					  walk_state, op, op->named.node));
			if (!acpi_ns_get_attached_object(op->named.node)) {
				walk_state->operands[0] =
				    ACPI_CAST_PTR(void, op->named.node);
				walk_state->num_operands = 1;
				status =
				    acpi_ds_create_operands(walk_state,
							    op->common.value.
							    arg);
				if (ACPI_SUCCESS(status)) {
					status =
					    acpi_ex_create_method(op->named.
								  data,
								  op->named.
								  length,
								  walk_state);
				}
				walk_state->operands[0] = NULL;
				walk_state->num_operands = 0;
				if (ACPI_FAILURE(status)) {
					return_ACPI_STATUS(status);
				}
			}
		}
	}
	/* Pop the scope stack (only if loading a table) */
	if (!walk_state->method_node && acpi_ns_opens_scope(object_type)) {
		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
				  "(%s): Popping scope for Op %p\n",
				  acpi_ut_get_type_name(object_type), op));
		status = acpi_ds_scope_stack_pop(walk_state);
	}
	return_ACPI_STATUS(status);
}
Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| andy grover | andy grover | 284 | 53.08% | 6 | 33.33% | 
| robert moore | robert moore | 76 | 14.21% | 5 | 27.78% | 
| pre-git | pre-git | 73 | 13.64% | 2 | 11.11% | 
| linus torvalds | linus torvalds | 54 | 10.09% | 3 | 16.67% | 
| lin ming | lin ming | 47 | 8.79% | 1 | 5.56% | 
| len brown | len brown | 1 | 0.19% | 1 | 5.56% | 
 | Total | 535 | 100.00% | 18 | 100.00% | 
Overall Contributors
 | Person | Tokens | Prop | Commits | CommitProp | 
| andy grover | andy grover | 535 | 36.17% | 12 | 26.09% | 
| robert moore | robert moore | 324 | 21.91% | 18 | 39.13% | 
| linus torvalds | linus torvalds | 225 | 15.21% | 3 | 6.52% | 
| pre-git | pre-git | 217 | 14.67% | 2 | 4.35% | 
| len brown | len brown | 94 | 6.36% | 6 | 13.04% | 
| lin ming | lin ming | 47 | 3.18% | 1 | 2.17% | 
| lv zheng | lv zheng | 36 | 2.43% | 3 | 6.52% | 
| patrick mochel | patrick mochel | 1 | 0.07% | 1 | 2.17% | 
 | Total | 1479 | 100.00% | 46 | 100.00% | 
  
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.