Release 4.7 drivers/acpi/acpica/dswload2.c
/******************************************************************************
*
* Module Name: dswload2 - Dispatcher second pass namespace load callbacks
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2016, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "acparser.h"
#include "amlcode.h"
#include "acdispat.h"
#include "acinterp.h"
#include "acnamesp.h"
#include "acevents.h"
#define _COMPONENT ACPI_DISPATCHER
ACPI_MODULE_NAME("dswload2")
/*******************************************************************************
*
* FUNCTION: acpi_ds_load2_begin_op
*
* PARAMETERS: walk_state - Current state of the parse tree walk
* out_op - Wher to return op if a new one is created
*
* RETURN: Status
*
* DESCRIPTION: Descending callback used during the loading of ACPI tables.
*
******************************************************************************/
acpi_status
acpi_ds_load2_begin_op(struct acpi_walk_state *walk_state,
union acpi_parse_object **out_op)
{
union acpi_parse_object *op;
struct acpi_namespace_node *node;
acpi_status status;
acpi_object_type object_type;
char *buffer_ptr;
u32 flags;
ACPI_FUNCTION_TRACE(ds_load2_begin_op);
op = walk_state->op;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p State=%p\n", op,
walk_state));
if (op) {
if ((walk_state->control_state) &&
(walk_state->control_state->common.state ==
ACPI_CONTROL_CONDITIONAL_EXECUTING)) {
/* We are executing a while loop outside of a method */
status = acpi_ds_exec_begin_op(walk_state, out_op);
return_ACPI_STATUS(status);
}
/* We only care about Namespace opcodes here */
if ((!(walk_state->op_info->flags & AML_NSOPCODE) &&
(walk_state->opcode != AML_INT_NAMEPATH_OP)) ||
(!(walk_state->op_info->flags & AML_NAMED))) {
return_ACPI_STATUS(AE_OK);
}
/* Get the name we are going to enter or lookup in the namespace */
if (walk_state->opcode == AML_INT_NAMEPATH_OP) {
/* For Namepath op, get the path string */
buffer_ptr = op->common.value.string;
if (!buffer_ptr) {
/* No name, just exit */
return_ACPI_STATUS(AE_OK);
}
} else {
/* Get name from the op */
buffer_ptr = ACPI_CAST_PTR(char, &op->named.name);
}
} else {
/* Get the namestring from the raw AML */
buffer_ptr =
acpi_ps_get_next_namestring(&walk_state->parser_state);
}
/* Map the opcode into an internal object type */
object_type = walk_state->op_info->object_type;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"State=%p Op=%p Type=%X\n", walk_state, op,
object_type));
switch (walk_state->opcode) {
case AML_FIELD_OP:
case AML_BANK_FIELD_OP:
case AML_INDEX_FIELD_OP:
node = NULL;
status = AE_OK;
break;
case AML_INT_NAMEPATH_OP:
/*
* The name_path is an object reference to an existing object.
* Don't enter the name into the namespace, but look it up
* for use later.
*/
status =
acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
object_type, ACPI_IMODE_EXECUTE,
ACPI_NS_SEARCH_PARENT, walk_state, &(node));
break;
case AML_SCOPE_OP:
/* Special case for Scope(\) -> refers to the Root node */
if (op && (op->named.node == acpi_gbl_root_node)) {
node = op->named.node;
status =
acpi_ds_scope_stack_push(node, object_type,
walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
} else {
/*
* The Path is an object reference to an existing object.
* Don't enter the name into the namespace, but look it up
* for use later.
*/
status =
acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
object_type, ACPI_IMODE_EXECUTE,
ACPI_NS_SEARCH_PARENT, walk_state,
&(node));
if (ACPI_FAILURE(status)) {
#ifdef ACPI_ASL_COMPILER
if (status == AE_NOT_FOUND) {
status = AE_OK;
} else {
ACPI_ERROR_NAMESPACE(buffer_ptr,
status);
}
#else
ACPI_ERROR_NAMESPACE(buffer_ptr, status);
#endif
return_ACPI_STATUS(status);
}
}
/*
* We must check to make sure that the target is
* one of the opcodes that actually opens a scope
*/
switch (node->type) {
case ACPI_TYPE_ANY:
case ACPI_TYPE_LOCAL_SCOPE: /* Scope */
case ACPI_TYPE_DEVICE:
case ACPI_TYPE_POWER:
case ACPI_TYPE_PROCESSOR:
case ACPI_TYPE_THERMAL:
/* These are acceptable types */
break;
case ACPI_TYPE_INTEGER:
case ACPI_TYPE_STRING:
case ACPI_TYPE_BUFFER:
/*
* These types we will allow, but we will change the type.
* This enables some existing code of the form:
*
* Name (DEB, 0)
* Scope (DEB) { ... }
*/
ACPI_WARNING((AE_INFO,
"Type override - [%4.4s] had invalid type (%s) "
"for Scope operator, changed to type ANY",
acpi_ut_get_node_name(node),
acpi_ut_get_type_name(node->type)));
node->type = ACPI_TYPE_ANY;
walk_state->scope_info->common.value = ACPI_TYPE_ANY;
break;
case ACPI_TYPE_METHOD:
/*
* Allow scope change to root during execution of module-level
* code. Root is typed METHOD during this time.
*/
if ((node == acpi_gbl_root_node) &&
(walk_state->
parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
break;
}
/*lint -fallthrough */
default:
/* All other types are an error */
ACPI_ERROR((AE_INFO,
"Invalid type (%s) for target of "
"Scope operator [%4.4s] (Cannot override)",
acpi_ut_get_type_name(node->type),
acpi_ut_get_node_name(node)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
break;
default:
/* All other opcodes */
if (op && op->common.node) {
/* This op/node was previously entered into the namespace */
node = op->common.node;
if (acpi_ns_opens_scope(object_type)) {
status =
acpi_ds_scope_stack_push(node, object_type,
walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
return_ACPI_STATUS(AE_OK);
}
/*
* Enter the named type into the internal namespace. We enter the name
* as we go downward in the parse tree. Any necessary subobjects that
* involve arguments to the opcode must be created as we go back up the
* parse tree later.
*
* Note: Name may already exist if we are executing a deferred opcode.
*/
if (walk_state->deferred_node) {
/* This name is already in the namespace, get the node */
node = walk_state->deferred_node;
status = AE_OK;
break;
}
flags = ACPI_NS_NO_UPSEARCH;
if (walk_state->pass_number == ACPI_IMODE_EXECUTE) {
/* Execution mode, node cannot already exist, node is temporary */
flags |= ACPI_NS_ERROR_IF_FOUND;
if (!
(walk_state->
parse_flags & ACPI_PARSE_MODULE_LEVEL)) {
flags |= ACPI_NS_TEMPORARY;
}
}
/* Add new entry or lookup existing entry */
status =
acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
object_type, ACPI_IMODE_LOAD_PASS2, flags,
walk_state, &node);
if (ACPI_SUCCESS(status) && (flags & ACPI_NS_TEMPORARY)) {
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"***New Node [%4.4s] %p is temporary\n",
acpi_ut_get_node_name(node), node));
}
break;
}
if (ACPI_FAILURE(status)) {
ACPI_ERROR_NAMESPACE(buffer_ptr, status);
return_ACPI_STATUS(status);
}
if (!op) {
/* Create a new op */
op = acpi_ps_alloc_op(walk_state->opcode, walk_state->aml);
if (!op) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Initialize the new op */
if (node) {
op->named.name = node->name.integer;
}
*out_op = op;
}
/*
* Put the Node in the "op" object that the parser uses, so we
* can get it again quickly when this scope is closed
*/
op->common.node = node;
return_ACPI_STATUS(status);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| robert moore | robert moore | 822 | 99.52% | 4 | 80.00% |
| lv zheng | lv zheng | 4 | 0.48% | 1 | 20.00% |
| Total | 826 | 100.00% | 5 | 100.00% |
/*******************************************************************************
*
* FUNCTION: acpi_ds_load2_end_op
*
* PARAMETERS: walk_state - Current state of the parse tree walk
*
* RETURN: Status
*
* DESCRIPTION: Ascending callback used during the loading of the namespace,
* both control methods and everything else.
*
******************************************************************************/
acpi_status acpi_ds_load2_end_op(struct acpi_walk_state *walk_state)
{
union acpi_parse_object *op;
acpi_status status = AE_OK;
acpi_object_type object_type;
struct acpi_namespace_node *node;
union acpi_parse_object *arg;
struct acpi_namespace_node *new_node;
#ifndef ACPI_NO_METHOD_EXECUTION
u32 i;
u8 region_space;
#endif
ACPI_FUNCTION_TRACE(ds_load2_end_op);
op = walk_state->op;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Opcode [%s] Op %p State %p\n",
walk_state->op_info->name, op, walk_state));
/* Check if opcode had an associated namespace object */
if (!(walk_state->op_info->flags & AML_NSOBJECT)) {
return_ACPI_STATUS(AE_OK);
}
if (op->common.aml_opcode == AML_SCOPE_OP) {
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"Ending scope Op=%p State=%p\n", op,
walk_state));
}
object_type = walk_state->op_info->object_type;
/*
* Get the Node/name from the earlier lookup
* (It was saved in the *op structure)
*/
node = op->common.node;
/*
* Put the Node on the object stack (Contains the ACPI Name of
* this object)
*/
walk_state->operands[0] = (void *)node;
walk_state->num_operands = 1;
/* Pop the scope stack */
if (acpi_ns_opens_scope(object_type) &&
(op->common.aml_opcode != AML_INT_METHODCALL_OP)) {
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"(%s) Popping scope for Op %p\n",
acpi_ut_get_type_name(object_type), op));
status = acpi_ds_scope_stack_pop(walk_state);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
}
/*
* Named operations are as follows:
*
* AML_ALIAS
* AML_BANKFIELD
* AML_CREATEBITFIELD
* AML_CREATEBYTEFIELD
* AML_CREATEDWORDFIELD
* AML_CREATEFIELD
* AML_CREATEQWORDFIELD
* AML_CREATEWORDFIELD
* AML_DATA_REGION
* AML_DEVICE
* AML_EVENT
* AML_FIELD
* AML_INDEXFIELD
* AML_METHOD
* AML_METHODCALL
* AML_MUTEX
* AML_NAME
* AML_NAMEDFIELD
* AML_OPREGION
* AML_POWERRES
* AML_PROCESSOR
* AML_SCOPE
* AML_THERMALZONE
*/
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"Create-Load [%s] State=%p Op=%p NamedObj=%p\n",
acpi_ps_get_opcode_name(op->common.aml_opcode),
walk_state, op, node));
/* Decode the opcode */
arg = op->common.value.arg;
switch (walk_state->op_info->type) {
#ifndef ACPI_NO_METHOD_EXECUTION
case AML_TYPE_CREATE_FIELD:
/*
* Create the field object, but the field buffer and index must
* be evaluated later during the execution phase
*/
status = acpi_ds_create_buffer_field(op, walk_state);
break;
case AML_TYPE_NAMED_FIELD:
/*
* If we are executing a method, initialize the field
*/
if (walk_state->method_node) {
status = acpi_ds_init_field_objects(op, walk_state);
}
switch (op->common.aml_opcode) {
case AML_INDEX_FIELD_OP:
status =
acpi_ds_create_index_field(op,
(acpi_handle)arg->common.
node, walk_state);
break;
case AML_BANK_FIELD_OP:
status =
acpi_ds_create_bank_field(op, arg->common.node,
walk_state);
break;
case AML_FIELD_OP:
status =
acpi_ds_create_field(op, arg->common.node,
walk_state);
break;
default:
/* All NAMED_FIELD opcodes must be handled above */
break;
}
break;
case AML_TYPE_NAMED_SIMPLE:
status = acpi_ds_create_operands(walk_state, arg);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
switch (op->common.aml_opcode) {
case AML_PROCESSOR_OP:
status = acpi_ex_create_processor(walk_state);
break;
case AML_POWER_RES_OP:
status = acpi_ex_create_power_resource(walk_state);
break;
case AML_MUTEX_OP:
status = acpi_ex_create_mutex(walk_state);
break;
case AML_EVENT_OP:
status = acpi_ex_create_event(walk_state);
break;
case AML_ALIAS_OP:
status = acpi_ex_create_alias(walk_state);
break;
default:
/* Unknown opcode */
status = AE_OK;
goto cleanup;
}
/* Delete operands */
for (i = 1; i < walk_state->num_operands; i++) {
acpi_ut_remove_reference(walk_state->operands[i]);
walk_state->operands[i] = NULL;
}
break;
#endif /* ACPI_NO_METHOD_EXECUTION */
case AML_TYPE_NAMED_COMPLEX:
switch (op->common.aml_opcode) {
#ifndef ACPI_NO_METHOD_EXECUTION
case AML_REGION_OP:
case AML_DATA_REGION_OP:
if (op->common.aml_opcode == AML_REGION_OP) {
region_space = (acpi_adr_space_type)
((op->common.value.arg)->common.value.
integer);
} else {
region_space = ACPI_ADR_SPACE_DATA_TABLE;
}
/*
* The op_region is not fully parsed at this time. The only valid
* argument is the space_id. (We must save the address of the
* AML of the address and length operands)
*
* If we have a valid region, initialize it. The namespace is
* unlocked at this point.
*
* Need to unlock interpreter if it is locked (if we are running
* a control method), in order to allow _REG methods to be run
* during acpi_ev_initialize_region.
*/
if (walk_state->method_node) {
/*
* Executing a method: initialize the region and unlock
* the interpreter
*/
status = acpi_ex_create_region(op->named.data,
op->named.length,
region_space,
walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
acpi_ex_exit_interpreter();
}
status =
acpi_ev_initialize_region
(acpi_ns_get_attached_object(node), FALSE);
if (walk_state->method_node) {
acpi_ex_enter_interpreter();
}
if (ACPI_FAILURE(status)) {
/*
* If AE_NOT_EXIST is returned, it is not fatal
* because many regions get created before a handler
* is installed for said region.
*/
if (AE_NOT_EXIST == status) {
status = AE_OK;
}
}
break;
case AML_NAME_OP:
status = acpi_ds_create_node(walk_state, node, op);
break;
case AML_METHOD_OP:
/*
* method_op pkg_length name_string method_flags term_list
*
* Note: We must create the method node/object pair as soon as we
* see the method declaration. This allows later pass1 parsing
* of invocations of the method (need to know the number of
* arguments.)
*/
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"LOADING-Method: State=%p Op=%p NamedObj=%p\n",
walk_state, op, op->named.node));
if (!acpi_ns_get_attached_object(op->named.node)) {
walk_state->operands[0] =
ACPI_CAST_PTR(void, op->named.node);
walk_state->num_operands = 1;
status =
acpi_ds_create_operands(walk_state,
op->common.value.
arg);
if (ACPI_SUCCESS(status)) {
status =
acpi_ex_create_method(op->named.
data,
op->named.
length,
walk_state);
}
walk_state->operands[0] = NULL;
walk_state->num_operands = 0;
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
break;
#endif /* ACPI_NO_METHOD_EXECUTION */
default:
/* All NAMED_COMPLEX opcodes must be handled above */
break;
}
break;
case AML_CLASS_INTERNAL:
/* case AML_INT_NAMEPATH_OP: */
break;
case AML_CLASS_METHOD_CALL:
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"RESOLVING-MethodCall: State=%p Op=%p NamedObj=%p\n",
walk_state, op, node));
/*
* Lookup the method name and save the Node
*/
status =
acpi_ns_lookup(walk_state->scope_info,
arg->common.value.string, ACPI_TYPE_ANY,
ACPI_IMODE_LOAD_PASS2,
ACPI_NS_SEARCH_PARENT |
ACPI_NS_DONT_OPEN_SCOPE, walk_state,
&(new_node));
if (ACPI_SUCCESS(status)) {
/*
* Make sure that what we found is indeed a method
* We didn't search for a method on purpose, to see if the name
* would resolve
*/
if (new_node->type != ACPI_TYPE_METHOD) {
status = AE_AML_OPERAND_TYPE;
}
/* We could put the returned object (Node) on the object stack for
* later, but for now, we will put it in the "op" object that the
* parser uses, so we can get it again at the end of this scope
*/
op->common.node = new_node;
} else {
ACPI_ERROR_NAMESPACE(arg->common.value.string, status);
}
break;
default:
break;
}
cleanup:
/* Remove the Node pushed at the very beginning */
walk_state->operands[0] = NULL;
walk_state->num_operands = 0;
return_ACPI_STATUS(status);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| robert moore | robert moore | 959 | 100.00% | 3 | 100.00% |
| Total | 959 | 100.00% | 3 | 100.00% |
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| robert moore | robert moore | 1817 | 99.78% | 6 | 85.71% |
| lv zheng | lv zheng | 4 | 0.22% | 1 | 14.29% |
| Total | 1821 | 100.00% | 7 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.