Release 4.7 drivers/acpi/acpica/utnonansi.c
/*******************************************************************************
*
* Module Name: utnonansi - Non-ansi C library functions
*
******************************************************************************/
/*
* Copyright (C) 2000 - 2016, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utnonansi")
/*
* Non-ANSI C library functions - strlwr, strupr, stricmp, and a 64-bit
* version of strtoul.
*/
/*******************************************************************************
*
* FUNCTION: acpi_ut_strlwr (strlwr)
*
* PARAMETERS: src_string - The source string to convert
*
* RETURN: None
*
* DESCRIPTION: Convert a string to lowercase
*
******************************************************************************/
void acpi_ut_strlwr(char *src_string)
{
char *string;
ACPI_FUNCTION_ENTRY();
if (!src_string) {
return;
}
/* Walk entire string, lowercasing the letters */
for (string = src_string; *string; string++) {
*string = (char)tolower((int)*string);
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| robert moore | robert moore | 54 | 100.00% | 1 | 100.00% |
| Total | 54 | 100.00% | 1 | 100.00% |
/*******************************************************************************
*
* FUNCTION: acpi_ut_strupr (strupr)
*
* PARAMETERS: src_string - The source string to convert
*
* RETURN: None
*
* DESCRIPTION: Convert a string to uppercase
*
******************************************************************************/
void acpi_ut_strupr(char *src_string)
{
char *string;
ACPI_FUNCTION_ENTRY();
if (!src_string) {
return;
}
/* Walk entire string, uppercasing the letters */
for (string = src_string; *string; string++) {
*string = (char)toupper((int)*string);
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| robert moore | robert moore | 54 | 100.00% | 1 | 100.00% |
| Total | 54 | 100.00% | 1 | 100.00% |
/******************************************************************************
*
* FUNCTION: acpi_ut_stricmp (stricmp)
*
* PARAMETERS: string1 - first string to compare
* string2 - second string to compare
*
* RETURN: int that signifies string relationship. Zero means strings
* are equal.
*
* DESCRIPTION: Case-insensitive string compare. Implementation of the
* non-ANSI stricmp function.
*
******************************************************************************/
int acpi_ut_stricmp(char *string1, char *string2)
{
int c1;
int c2;
do {
c1 = tolower((int)*string1);
c2 = tolower((int)*string2);
string1++;
string2++;
}
while ((c1 == c2) && (c1));
return (c1 - c2);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| robert moore | robert moore | 70 | 100.00% | 1 | 100.00% |
| Total | 70 | 100.00% | 1 | 100.00% |
#if defined (ACPI_DEBUGGER) || defined (ACPI_APPLICATION)
/*******************************************************************************
*
* FUNCTION: acpi_ut_safe_strcpy, acpi_ut_safe_strcat, acpi_ut_safe_strncat
*
* PARAMETERS: Adds a "DestSize" parameter to each of the standard string
* functions. This is the size of the Destination buffer.
*
* RETURN: TRUE if the operation would overflow the destination buffer.
*
* DESCRIPTION: Safe versions of standard Clib string functions. Ensure that
* the result of the operation will not overflow the output string
* buffer.
*
* NOTE: These functions are typically only helpful for processing
* user input and command lines. For most ACPICA code, the
* required buffer length is precisely calculated before buffer
* allocation, so the use of these functions is unnecessary.
*
******************************************************************************/
u8 acpi_ut_safe_strcpy(char *dest, acpi_size dest_size, char *source)
{
if (strlen(source) >= dest_size) {
return (TRUE);
}
strcpy(dest, source);
return (FALSE);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| robert moore | robert moore | 44 | 100.00% | 1 | 100.00% |
| Total | 44 | 100.00% | 1 | 100.00% |
u8 acpi_ut_safe_strcat(char *dest, acpi_size dest_size, char *source)
{
if ((strlen(dest) + strlen(source)) >= dest_size) {
return (TRUE);
}
strcat(dest, source);
return (FALSE);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| robert moore | robert moore | 51 | 100.00% | 1 | 100.00% |
| Total | 51 | 100.00% | 1 | 100.00% |
u8
acpi_ut_safe_strncat(char *dest,
acpi_size dest_size,
char *source, acpi_size max_transfer_length)
{
acpi_size actual_transfer_length;
actual_transfer_length = ACPI_MIN(max_transfer_length, strlen(source));
if ((strlen(dest) + actual_transfer_length) >= dest_size) {
return (TRUE);
}
strncat(dest, source, max_transfer_length);
return (FALSE);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| robert moore | robert moore | 68 | 100.00% | 1 | 100.00% |
| Total | 68 | 100.00% | 1 | 100.00% |
#endif
/*******************************************************************************
*
* FUNCTION: acpi_ut_strtoul64
*
* PARAMETERS: string - Null terminated string
* base - Radix of the string: 16 or 10 or
* ACPI_ANY_BASE
* max_integer_byte_width - Maximum allowable integer,in bytes:
* 4 or 8 (32 or 64 bits)
* ret_integer - Where the converted integer is
* returned
*
* RETURN: Status and Converted value
*
* DESCRIPTION: Convert a string into an unsigned value. Performs either a
* 32-bit or 64-bit conversion, depending on the input integer
* size (often the current mode of the interpreter).
*
* NOTES: Negative numbers are not supported, as they are not supported
* by ACPI.
*
* acpi_gbl_integer_byte_width should be set to the proper width.
* For the core ACPICA code, this width depends on the DSDT
* version. For iASL, the default byte width is always 8 for the
* parser, but error checking is performed later to flag cases
* where a 64-bit constant is defined in a 32-bit DSDT/SSDT.
*
* Does not support Octal strings, not needed at this time.
*
******************************************************************************/
acpi_status
acpi_ut_strtoul64(char *string,
u32 base, u32 max_integer_byte_width, u64 *ret_integer)
{
u32 this_digit = 0;
u64 return_value = 0;
u64 quotient;
u64 dividend;
u8 valid_digits = 0;
u8 sign_of0x = 0;
u8 term = 0;
ACPI_FUNCTION_TRACE_STR(ut_strtoul64, string);
switch (base) {
case ACPI_ANY_BASE:
case 10:
case 16:
break;
default:
/* Invalid Base */
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
if (!string) {
goto error_exit;
}
/* Skip over any white space in the buffer */
while ((*string) && (isspace((int)*string) || *string == '\t')) {
string++;
}
if (base == ACPI_ANY_BASE) {
/*
* Base equal to ACPI_ANY_BASE means 'Either decimal or hex'.
* We need to determine if it is decimal or hexadecimal.
*/
if ((*string == '0') && (tolower((int)*(string + 1)) == 'x')) {
sign_of0x = 1;
base = 16;
/* Skip over the leading '0x' */
string += 2;
} else {
base = 10;
}
}
/* Any string left? Check that '0x' is not followed by white space. */
if (!(*string) || isspace((int)*string) || *string == '\t') {
if (base == ACPI_ANY_BASE) {
goto error_exit;
} else {
goto all_done;
}
}
/*
* Perform a 32-bit or 64-bit conversion, depending upon the input
* byte width
*/
dividend = (max_integer_byte_width <= ACPI_MAX32_BYTE_WIDTH) ?
ACPI_UINT32_MAX : ACPI_UINT64_MAX;
/* Main loop: convert the string to a 32- or 64-bit integer */
while (*string) {
if (isdigit((int)*string)) {
/* Convert ASCII 0-9 to Decimal value */
this_digit = ((u8)*string) - '0';
} else if (base == 10) {
/* Digit is out of range; possible in to_integer case only */
term = 1;
} else {
this_digit = (u8)toupper((int)*string);
if (isxdigit((int)this_digit)) {
/* Convert ASCII Hex char to value */
this_digit = this_digit - 'A' + 10;
} else {
term = 1;
}
}
if (term) {
if (base == ACPI_ANY_BASE) {
goto error_exit;
} else {
break;
}
} else if ((valid_digits == 0) && (this_digit == 0)
&& !sign_of0x) {
/* Skip zeros */
string++;
continue;
}
valid_digits++;
if (sign_of0x && ((valid_digits > 16) ||
((valid_digits > 8)
&& (max_integer_byte_width <=
ACPI_MAX32_BYTE_WIDTH)))) {
/*
* This is to_integer operation case.
* No restrictions for string-to-integer conversion,
* see ACPI spec.
*/
goto error_exit;
}
/* Divide the digit into the correct position */
(void)acpi_ut_short_divide((dividend - (u64)this_digit), base,
"ient, NULL);
if (return_value > quotient) {
if (base == ACPI_ANY_BASE) {
goto error_exit;
} else {
break;
}
}
return_value *= base;
return_value += this_digit;
string++;
}
/* All done, normal exit */
all_done:
ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Converted value: %8.8X%8.8X\n",
ACPI_FORMAT_UINT64(return_value)));
*ret_integer = return_value;
return_ACPI_STATUS(AE_OK);
error_exit:
/* Base was set/validated above (10 or 16) */
if (base == 10) {
return_ACPI_STATUS(AE_BAD_DECIMAL_CONSTANT);
} else {
return_ACPI_STATUS(AE_BAD_HEX_CONSTANT);
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| robert moore | robert moore | 513 | 100.00% | 3 | 100.00% |
| Total | 513 | 100.00% | 3 | 100.00% |
#ifdef _OBSOLETE_FUNCTIONS
/* Removed: 01/2016 */
/*******************************************************************************
*
* FUNCTION: strtoul64
*
* PARAMETERS: string - Null terminated string
* terminater - Where a pointer to the terminating byte
* is returned
* base - Radix of the string
*
* RETURN: Converted value
*
* DESCRIPTION: Convert a string into an unsigned value.
*
******************************************************************************/
acpi_status strtoul64(char *string, u32 base, u64 *ret_integer)
{
u32 index;
u32 sign;
u64 return_value = 0;
acpi_status status = AE_OK;
*ret_integer = 0;
switch (base) {
case 0:
case 8:
case 10:
case 16:
break;
default:
/*
* The specified Base parameter is not in the domain of
* this function:
*/
return (AE_BAD_PARAMETER);
}
/* Skip over any white space in the buffer: */
while (isspace((int)*string) || *string == '\t') {
++string;
}
/*
* The buffer may contain an optional plus or minus sign.
* If it does, then skip over it but remember what is was:
*/
if (*string == '-') {
sign = ACPI_SIGN_NEGATIVE;
++string;
} else if (*string == '+') {
++string;
sign = ACPI_SIGN_POSITIVE;
} else {
sign = ACPI_SIGN_POSITIVE;
}
/*
* If the input parameter Base is zero, then we need to
* determine if it is octal, decimal, or hexadecimal:
*/
if (base == 0) {
if (*string == '0') {
if (tolower((int)*(++string)) == 'x') {
base = 16;
++string;
} else {
base = 8;
}
} else {
base = 10;
}
}
/*
* For octal and hexadecimal bases, skip over the leading
* 0 or 0x, if they are present.
*/
if (base == 8 && *string == '0') {
string++;
}
if (base == 16 && *string == '0' && tolower((int)*(++string)) == 'x') {
string++;
}
/* Main loop: convert the string to an unsigned long */
while (*string) {
if (isdigit((int)*string)) {
index = ((u8)*string) - '0';
} else {
index = (u8)toupper((int)*string);
if (isupper((int)index)) {
index = index - 'A' + 10;
} else {
goto error_exit;
}
}
if (index >= base) {
goto error_exit;
}
/* Check to see if value is out of range: */
if (return_value > ((ACPI_UINT64_MAX - (u64)index) / (u64)base)) {
goto error_exit;
} else {
return_value *= base;
return_value += index;
}
++string;
}
/* If a minus sign was present, then "the conversion is negated": */
if (sign == ACPI_SIGN_NEGATIVE) {
return_value = (ACPI_UINT32_MAX - return_value) + 1;
}
*ret_integer = return_value;
return (status);
error_exit:
switch (base) {
case 8:
status = AE_BAD_OCTAL_CONSTANT;
break;
case 10:
status = AE_BAD_DECIMAL_CONSTANT;
break;
case 16:
status = AE_BAD_HEX_CONSTANT;
break;
default:
/* Base validated above */
break;
}
return (status);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| robert moore | robert moore | 426 | 100.00% | 2 | 100.00% |
| Total | 426 | 100.00% | 2 | 100.00% |
#endif
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| robert moore | robert moore | 1322 | 100.00% | 5 | 100.00% |
| Total | 1322 | 100.00% | 5 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.