cregit-Linux how code gets into the kernel

Release 4.7 drivers/ata/pata_sch.c

Directory: drivers/ata
/*
 *  pata_sch.c - Intel SCH PATA controllers
 *
 *  Copyright (c) 2008 Alek Du <alek.du@intel.com>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License 2 as published
 *  by the Free Software Foundation.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; see the file COPYING.  If not, write to
 *  the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */

/*
 *  Supports:
 *    Intel SCH (AF82US15W, AF82US15L, AF82UL11L) chipsets -- see spec at:
 *    http://download.intel.com/design/chipsets/embedded/datashts/319537.pdf
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <linux/dmi.h>


#define DRV_NAME	"pata_sch"

#define DRV_VERSION	"0.2"

/* see SCH datasheet page 351 */
enum {
	
D0TIM	= 0x80,		/* Device 0 Timing Register */
	
D1TIM	= 0x84,		/* Device 1 Timing Register */
	
PM	= 0x07,		/* PIO Mode Bit Mask */
	
MDM	= (0x03 << 8),	/* Multi-word DMA Mode Bit Mask */
	
UDM	= (0x07 << 16), /* Ultra DMA Mode Bit Mask */
	
PPE	= (1 << 30),	/* Prefetch/Post Enable */
	
USD	= (1 << 31),	/* Use Synchronous DMA */
};

static int sch_init_one(struct pci_dev *pdev,
			 const struct pci_device_id *ent);
static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev);
static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev);


static const struct pci_device_id sch_pci_tbl[] = {
	/* Intel SCH PATA Controller */
	{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_SCH_IDE), 0 },
	{ }	/* terminate list */
};


static struct pci_driver sch_pci_driver = {
	.name			= DRV_NAME,
	.id_table		= sch_pci_tbl,
	.probe			= sch_init_one,
	.remove			= ata_pci_remove_one,
#ifdef CONFIG_PM_SLEEP
	.suspend		= ata_pci_device_suspend,
	.resume			= ata_pci_device_resume,
#endif
};


static struct scsi_host_template sch_sht = {
	ATA_BMDMA_SHT(DRV_NAME),
};


static struct ata_port_operations sch_pata_ops = {
	.inherits		= &ata_bmdma_port_ops,
	.cable_detect		= ata_cable_unknown,
	.set_piomode		= sch_set_piomode,
	.set_dmamode		= sch_set_dmamode,
};


static struct ata_port_info sch_port_info = {
	.flags		= ATA_FLAG_SLAVE_POSS,
	.pio_mask	= ATA_PIO4,
	.mwdma_mask	= ATA_MWDMA2,
	.udma_mask	= ATA_UDMA5,
	.port_ops	= &sch_pata_ops,
};

MODULE_AUTHOR("Alek Du <alek.du@intel.com>");
MODULE_DESCRIPTION("SCSI low-level driver for Intel SCH PATA controllers");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, sch_pci_tbl);

MODULE_VERSION(DRV_VERSION);

/**
 *      sch_set_piomode - Initialize host controller PATA PIO timings
 *      @ap: Port whose timings we are configuring
 *      @adev: ATA device
 *
 *      Set PIO mode for device, in host controller PCI config space.
 *
 *      LOCKING:
 *      None (inherited from caller).
 */


static void sch_set_piomode(struct ata_port *ap, struct ata_device *adev) { unsigned int pio = adev->pio_mode - XFER_PIO_0; struct pci_dev *dev = to_pci_dev(ap->host->dev); unsigned int port = adev->devno ? D1TIM : D0TIM; unsigned int data; pci_read_config_dword(dev, port, &data); /* see SCH datasheet page 351 */ /* set PIO mode */ data &= ~(PM | PPE); data |= pio; /* enable PPE for block device */ if (adev->class == ATA_DEV_ATA) data |= PPE; pci_write_config_dword(dev, port, data); }

Contributors

PersonTokensPropCommitsCommitProp
alek dualek du103100.00%1100.00%
Total103100.00%1100.00%

/** * sch_set_dmamode - Initialize host controller PATA DMA timings * @ap: Port whose timings we are configuring * @adev: ATA device * * Set MW/UDMA mode for device, in host controller PCI config space. * * LOCKING: * None (inherited from caller). */
static void sch_set_dmamode(struct ata_port *ap, struct ata_device *adev) { unsigned int dma_mode = adev->dma_mode; struct pci_dev *dev = to_pci_dev(ap->host->dev); unsigned int port = adev->devno ? D1TIM : D0TIM; unsigned int data; pci_read_config_dword(dev, port, &data); /* see SCH datasheet page 351 */ if (dma_mode >= XFER_UDMA_0) { /* enable Synchronous DMA mode */ data |= USD; data &= ~UDM; data |= (dma_mode - XFER_UDMA_0) << 16; } else { /* must be MWDMA mode, since we masked SWDMA already */ data &= ~(USD | MDM); data |= (dma_mode - XFER_MW_DMA_0) << 8; } pci_write_config_dword(dev, port, data); }

Contributors

PersonTokensPropCommitsCommitProp
alek dualek du125100.00%1100.00%
Total125100.00%1100.00%

/** * sch_init_one - Register SCH ATA PCI device with kernel services * @pdev: PCI device to register * @ent: Entry in sch_pci_tbl matching with @pdev * * LOCKING: * Inherited from PCI layer (may sleep). * * RETURNS: * Zero on success, or -ERRNO value. */
static int sch_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { const struct ata_port_info *ppi[] = { &sch_port_info, NULL }; ata_print_version_once(&pdev->dev, DRV_VERSION); return ata_pci_bmdma_init_one(pdev, ppi, &sch_sht, NULL, 0); }

Contributors

PersonTokensPropCommitsCommitProp
alek dualek du5191.07%125.00%
tejun heotejun heo47.14%250.00%
joe perchesjoe perches11.79%125.00%
Total56100.00%4100.00%

module_pci_driver(sch_pci_driver);

Overall Contributors

PersonTokensPropCommitsCommitProp
alek dualek du58998.49%114.29%
tejun heotejun heo40.67%228.57%
axel linaxel lin20.33%114.29%
bartlomiej zolnierkiewiczbartlomiej zolnierkiewicz10.17%114.29%
joe perchesjoe perches10.17%114.29%
mark saltermark salter10.17%114.29%
Total598100.00%7100.00%
Directory: drivers/ata
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}