Release 4.7 drivers/block/paride/epat.c

/* 
        epat.c  (c) 1997-8  Grant R. Guenther <grant@torque.net>
                            Under the terms of the GNU General Public License.

        This is the low level protocol driver for the EPAT parallel
        to IDE adapter from Shuttle Technologies.  This adapter is
        used in many popular parallel port disk products such as the
        SyQuest EZ drives, the Avatar Shark and the Imation SuperDisk.
        
*/

/* Changes:

        1.01    GRG 1998.05.06 init_proto, release_proto
        1.02    Joshua b. Jore CPP(renamed), epat_connect, epat_disconnect

*/


#define EPAT_VERSION      "1.02"

#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>

#include "paride.h"


#define j44(a,b)		(((a>>4)&0x0f)+(b&0xf0))

#define j53(a,b)		(((a>>3)&0x1f)+((b<<4)&0xe0))


static int epatc8;

module_param(epatc8, int, 0);
MODULE_PARM_DESC(epatc8, "support for the Shuttle EP1284 chip, "
	"used in any recent Imation SuperDisk (LS-120) drive.");

/* cont =  0   IDE register file
   cont =  1   IDE control registers
   cont =  2   internal EPAT registers
*/


static int cont_map[3] = { 0x18, 0x10, 0 };



static void epat_write_regr( PIA *pi, int cont, int regr, int val)

{	int r;

	r = regr + cont_map[cont];

	switch (pi->mode) {

	case 0:
	case 1:
	case 2:	w0(0x60+r); w2(1); w0(val); w2(4);
		break;

	case 3:
	case 4:
	case 5: w3(0x40+r); w4(val);
		break;

	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
93
100.00%
1
100.00%
Total
93
100.00%
1
100.00%



static int epat_read_regr( PIA *pi, int cont, int regr )

{	int  a, b, r;

	r = regr + cont_map[cont];

	switch (pi->mode) {

	case 0:	w0(r); w2(1); w2(3); 
		a = r1(); w2(4); b = r1();
		return j44(a,b);

	case 1: w0(0x40+r); w2(1); w2(4);
		a = r1(); b = r2(); w0(0xff);
		return j53(a,b);

	case 2: w0(0x20+r); w2(1); w2(0x25);
		a = r0(); w2(4);
		return a;

	case 3:
	case 4:
	case 5: w3(r); w2(0x24); a = r4(); w2(4);
		return a;

	}
	return -1;	/* never gets here */
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
194
100.00%
1
100.00%
Total
194
100.00%
1
100.00%



static void epat_read_block( PIA *pi, char * buf, int count )

{	int  k, ph, a, b;

	switch (pi->mode) {

	case 0:	w0(7); w2(1); w2(3); w0(0xff);
		ph = 0;
		for(k=0;k<count;k++) {
			if (k == count-1) w0(0xfd);
			w2(6+ph); a = r1();
			if (a & 8) b = a; 
			  else { w2(4+ph); b = r1(); }
			buf[k] = j44(a,b);
			ph =  1 - ph;
		}
		w0(0); w2(4);
		break;

	case 1: w0(0x47); w2(1); w2(5); w0(0xff);
		ph = 0;
		for(k=0;k<count;k++) {
			if (k == count-1) w0(0xfd); 
			w2(4+ph);
			a = r1(); b = r2();
			buf[k] = j53(a,b);
			ph = 1 - ph;
		}
		w0(0); w2(4);
		break;

	case 2: w0(0x27); w2(1); w2(0x25); w0(0);
		ph = 0;
		for(k=0;k<count-1;k++) {
			w2(0x24+ph);
			buf[k] = r0();
			ph = 1 - ph;
		}
		w2(0x26); w2(0x27); buf[count-1] = r0(); 
		w2(0x25); w2(4);
		break;

	case 3: w3(0x80); w2(0x24);
		for(k=0;k<count-1;k++) buf[k] = r4();
		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
		w2(4);
		break;

	case 4: w3(0x80); w2(0x24);
		for(k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
		buf[count-2] = r4();
		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
		w2(4);
		break;

	case 5: w3(0x80); w2(0x24);
		for(k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
		for(k=count-4;k<count-1;k++) buf[k] = r4();
		w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
		w2(4);
		break;

	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
608
100.00%
1
100.00%
Total
608
100.00%
1
100.00%



static void epat_write_block( PIA *pi, char * buf, int count )   

{	int ph, k;

	switch (pi->mode) {

	case 0:
	case 1:
	case 2: w0(0x67); w2(1); w2(5);
		ph = 0;
		for(k=0;k<count;k++) {
		  	w0(buf[k]);
			w2(4+ph);
			ph = 1 - ph;
		}
		w2(7); w2(4);
		break;

	case 3: w3(0xc0); 
		for(k=0;k<count;k++) w4(buf[k]);
		w2(4);
		break;

	case 4: w3(0xc0); 
		for(k=0;k<(count/2);k++) w4w(((u16 *)buf)[k]);
		w2(4);
		break;

	case 5: w3(0xc0); 
		for(k=0;k<(count/4);k++) w4l(((u32 *)buf)[k]);
		w2(4);
		break;

	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
230
100.00%
1
100.00%
Total
230
100.00%
1
100.00%

/* these macros access the EPAT registers in native addressing */


#define	WR(r,v)		epat_write_regr(pi,2,r,v)

#define	RR(r)		(epat_read_regr(pi,2,r))

/* and these access the IDE task file */


#define WRi(r,v)         epat_write_regr(pi,0,r,v)

#define RRi(r)           (epat_read_regr(pi,0,r))

/* FIXME:  the CPP stuff should be fixed to handle multiple EPATs on a chain */


#define CPP(x) 	w2(4);w0(0x22);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
                w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);



static void epat_connect ( PIA *pi )

{       pi->saved_r0 = r0();
        pi->saved_r2 = r2();

 	/* Initialize the chip */
	CPP(0);

	if (epatc8) {
		CPP(0x40);CPP(0xe0);
		w0(0);w2(1);w2(4);
		WR(0x8,0x12);WR(0xc,0x14);WR(0x12,0x10);
		WR(0xe,0xf);WR(0xf,4);
		/* WR(0xe,0xa);WR(0xf,4); */
		WR(0xe,0xd);WR(0xf,0);
		/* CPP(0x30); */
	}

        /* Connect to the chip */
	CPP(0xe0);
        w0(0);w2(1);w2(4); /* Idle into SPP */
        if (pi->mode >= 3) {
          w0(0);w2(1);w2(4);w2(0xc);
          /* Request EPP */
          w0(0x40);w2(6);w2(7);w2(4);w2(0xc);w2(4);
        }

	if (!epatc8) {
		WR(8,0x10); WR(0xc,0x14); WR(0xa,0x38); WR(0x12,0x10);
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
linus torvalds
linus torvalds
161
70.00%
1
33.33%
pre-git
pre-git
60
26.09%
1
33.33%
andrew morton
andrew morton
9
3.91%
1
33.33%
Total
230
100.00%
3
100.00%



static void epat_disconnect (PIA *pi)
{	CPP(0x30);
	w0(pi->saved_r0);
	w2(pi->saved_r2);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
28
96.55%
1
50.00%
linus torvalds
linus torvalds
1
3.45%
1
50.00%
Total
29
100.00%
2
100.00%



static int epat_test_proto( PIA *pi, char * scratch, int verbose )

{       int     k, j, f, cc;
	int	e[2] = {0,0};

        epat_connect(pi);
	cc = RR(0xd);
	epat_disconnect(pi);

	epat_connect(pi);
	for (j=0;j<2;j++) {
  	    WRi(6,0xa0+j*0x10);
            for (k=0;k<256;k++) {
                WRi(2,k^0xaa);
                WRi(3,k^0x55);
                if (RRi(2) != (k^0xaa)) e[j]++;
                }
	    }
        epat_disconnect(pi);

        f = 0;
        epat_connect(pi);
        WR(0x13,1); WR(0x13,0); WR(0xa,0x11);
        epat_read_block(pi,scratch,512);
	
        for (k=0;k<256;k++) {
            if ((scratch[2*k] & 0xff) != k) f++;
            if ((scratch[2*k+1] & 0xff) != (0xff-k)) f++;
        }
        epat_disconnect(pi);

        if (verbose)  {
            printk("%s: epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
		   pi->device,pi->port,pi->mode,cc,e[0],e[1],f);
	}
	
        return (e[0] && e[1]) || f;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
296
100.00%
1
100.00%
Total
296
100.00%
1
100.00%



static void epat_log_adapter( PIA *pi, char * scratch, int verbose )

{	int	ver;
        char    *mode_string[6] = 
		   {"4-bit","5/3","8-bit","EPP-8","EPP-16","EPP-32"};

	epat_connect(pi);
	WR(0xa,0x38);		/* read the version code */
        ver = RR(0xb);
        epat_disconnect(pi);

	printk("%s: epat %s, Shuttle EPAT chip %x at 0x%x, ",
		pi->device,EPAT_VERSION,ver,pi->port);
	printk("mode %d (%s), delay %d\n",pi->mode,
		mode_string[pi->mode],pi->delay);

}

Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
103
100.00%
1
100.00%
Total
103
100.00%
1
100.00%


static struct pi_protocol epat = {
	.owner		= THIS_MODULE,
	.name		= "epat",
	.max_mode	= 6,
	.epp_first	= 3,
	.default_delay	= 1,
	.max_units	= 1,
	.write_regr	= epat_write_regr,
	.read_regr	= epat_read_regr,
	.write_block	= epat_write_block,
	.read_block	= epat_read_block,
	.connect	= epat_connect,
	.disconnect	= epat_disconnect,
	.test_proto	= epat_test_proto,
	.log_adapter	= epat_log_adapter,
};



static int __init epat_init(void)
{
#ifdef CONFIG_PARIDE_EPATC8
	epatc8 = 1;
#endif
	return paride_register(&epat);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
12
48.00%
1
25.00%
andrew morton
andrew morton
9
36.00%
1
25.00%
al viro
al viro
3
12.00%
1
25.00%
alexey dobriyan
alexey dobriyan
1
4.00%
1
25.00%
Total
25
100.00%
4
100.00%



static void __exit epat_exit(void)
{
	paride_unregister(&epat);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
11
73.33%
1
33.33%
al viro
al viro
3
20.00%
1
33.33%
alexey dobriyan
alexey dobriyan
1
6.67%
1
33.33%
Total
15
100.00%
3
100.00%

MODULE_LICENSE("GPL");
module_init(epat_init)
module_exit(epat_exit)
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
pre-git
pre-git
1764
86.47%
2
22.22%
linus torvalds
linus torvalds
172
8.43%
3
33.33%
al viro
al viro
63
3.09%
2
22.22%
andrew morton
andrew morton
39
1.91%
1
11.11%
alexey dobriyan
alexey dobriyan
2
0.10%
1
11.11%
Total
2040
100.00%
9
100.00%
  
Directory: drivers/block/paride

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.