Release 4.7 drivers/block/paride/ktti.c
/*
ktti.c (c) 1998 Grant R. Guenther <grant@torque.net>
Under the terms of the GNU General Public License.
ktti.c is a low-level protocol driver for the KT Technology
parallel port adapter. This adapter is used in the "PHd"
portable hard-drives. As far as I can tell, this device
supports 4-bit mode _only_.
*/
#define KTTI_VERSION "1.0"
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/wait.h>
#include <asm/io.h>
#include "paride.h"
#define j44(a,b) (((a>>4)&0x0f)|(b&0xf0))
/* cont = 0 - access the IDE register file
cont = 1 - access the IDE command set
*/
static int cont_map[2] = { 0x10, 0x08 };
static void ktti_write_regr( PIA *pi, int cont, int regr, int val)
{ int r;
r = regr + cont_map[cont];
w0(r); w2(0xb); w2(0xa); w2(3); w2(6);
w0(val); w2(3); w0(0); w2(6); w2(0xb);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
pre-git | pre-git | 81 | 100.00% | 1 | 100.00% |
| Total | 81 | 100.00% | 1 | 100.00% |
static int ktti_read_regr( PIA *pi, int cont, int regr )
{ int a, b, r;
r = regr + cont_map[cont];
w0(r); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9);
a = r1(); w2(0xc); b = r1(); w2(9); w2(0xc); w2(9);
return j44(a,b);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
pre-git | pre-git | 100 | 100.00% | 1 | 100.00% |
| Total | 100 | 100.00% | 1 | 100.00% |
static void ktti_read_block( PIA *pi, char * buf, int count )
{ int k, a, b;
for (k=0;k<count/2;k++) {
w0(0x10); w2(0xb); w2(0xa); w2(9); w2(0xc); w2(9);
a = r1(); w2(0xc); b = r1(); w2(9);
buf[2*k] = j44(a,b);
a = r1(); w2(0xc); b = r1(); w2(9);
buf[2*k+1] = j44(a,b);
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
pre-git | pre-git | 141 | 100.00% | 1 | 100.00% |
| Total | 141 | 100.00% | 1 | 100.00% |
static void ktti_write_block( PIA *pi, char * buf, int count )
{ int k;
for (k=0;k<count/2;k++) {
w0(0x10); w2(0xb); w2(0xa); w2(3); w2(6);
w0(buf[2*k]); w2(3);
w0(buf[2*k+1]); w2(6);
w2(0xb);
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
pre-git | pre-git | 99 | 100.00% | 1 | 100.00% |
| Total | 99 | 100.00% | 1 | 100.00% |
static void ktti_connect ( PIA *pi )
{ pi->saved_r0 = r0();
pi->saved_r2 = r2();
w2(0xb); w2(0xa); w0(0); w2(3); w2(6);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
pre-git | pre-git | 49 | 100.00% | 1 | 100.00% |
| Total | 49 | 100.00% | 1 | 100.00% |
static void ktti_disconnect ( PIA *pi )
{ w2(0xb); w2(0xa); w0(0xa0); w2(3); w2(4);
w0(pi->saved_r0);
w2(pi->saved_r2);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
pre-git | pre-git | 49 | 100.00% | 1 | 100.00% |
| Total | 49 | 100.00% | 1 | 100.00% |
static void ktti_log_adapter( PIA *pi, char * scratch, int verbose )
{ printk("%s: ktti %s, KT adapter at 0x%x, delay %d\n",
pi->device,KTTI_VERSION,pi->port,pi->delay);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
pre-git | pre-git | 36 | 100.00% | 1 | 100.00% |
| Total | 36 | 100.00% | 1 | 100.00% |
static struct pi_protocol ktti = {
.owner = THIS_MODULE,
.name = "ktti",
.max_mode = 1,
.epp_first = 2,
.default_delay = 1,
.max_units = 1,
.write_regr = ktti_write_regr,
.read_regr = ktti_read_regr,
.write_block = ktti_write_block,
.read_block = ktti_read_block,
.connect = ktti_connect,
.disconnect = ktti_disconnect,
.log_adapter = ktti_log_adapter,
};
static int __init ktti_init(void)
{
return paride_register(&ktti);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
pre-git | pre-git | 12 | 75.00% | 1 | 33.33% |
al viro | al viro | 3 | 18.75% | 1 | 33.33% |
alexey dobriyan | alexey dobriyan | 1 | 6.25% | 1 | 33.33% |
| Total | 16 | 100.00% | 3 | 100.00% |
static void __exit ktti_exit(void)
{
paride_unregister(&ktti);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
pre-git | pre-git | 11 | 73.33% | 1 | 33.33% |
al viro | al viro | 3 | 20.00% | 1 | 33.33% |
alexey dobriyan | alexey dobriyan | 1 | 6.67% | 1 | 33.33% |
| Total | 15 | 100.00% | 3 | 100.00% |
MODULE_LICENSE("GPL");
module_init(ktti_init)
module_exit(ktti_exit)
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
pre-git | pre-git | 655 | 90.59% | 2 | 28.57% |
al viro | al viro | 60 | 8.30% | 2 | 28.57% |
linus torvalds | linus torvalds | 6 | 0.83% | 2 | 28.57% |
alexey dobriyan | alexey dobriyan | 2 | 0.28% | 1 | 14.29% |
| Total | 723 | 100.00% | 7 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.