Release 4.7 drivers/eisa/pci_eisa.c
/*
* Minimalist driver for a generic PCI-to-EISA bridge.
*
* (C) 2003 Marc Zyngier <maz@wild-wind.fr.eu.org>
*
* This code is released under the GPL version 2.
*
* Ivan Kokshaysky <ink@jurassic.park.msu.ru> :
* Generalisation from i82375 to PCI_CLASS_BRIDGE_EISA.
*/
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/eisa.h>
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/init.h>
/* There is only *one* pci_eisa device per machine, right ? */
static struct eisa_root_device pci_eisa_root;
static int __init pci_eisa_init(struct pci_dev *pdev)
{
int rc, i;
struct resource *res, *bus_res = NULL;
if ((rc = pci_enable_device (pdev))) {
dev_err(&pdev->dev, "Could not enable device\n");
return rc;
}
/*
* The Intel 82375 PCI-EISA bridge is a subtractive-decode PCI
* device, so the resources available on EISA are the same as those
* available on the 82375 bus. This works the same as a PCI-PCI
* bridge in subtractive-decode mode (see pci_read_bridge_bases()).
* We assume other PCI-EISA bridges are similar.
*
* eisa_root_register() can only deal with a single io port resource,
* so we use the first valid io port resource.
*/
pci_bus_for_each_resource(pdev->bus, res, i)
if (res && (res->flags & IORESOURCE_IO)) {
bus_res = res;
break;
}
if (!bus_res) {
dev_err(&pdev->dev, "No resources available\n");
return -1;
}
pci_eisa_root.dev = &pdev->dev;
pci_eisa_root.res = bus_res;
pci_eisa_root.bus_base_addr = bus_res->start;
pci_eisa_root.slots = EISA_MAX_SLOTS;
pci_eisa_root.dma_mask = pdev->dma_mask;
dev_set_drvdata(pci_eisa_root.dev, &pci_eisa_root);
if (eisa_root_register (&pci_eisa_root)) {
dev_err(&pdev->dev, "Could not register EISA root\n");
return -1;
}
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| marc zyngier | marc zyngier | 88 | 50.00% | 2 | 28.57% |
| yinghai lu | yinghai lu | 63 | 35.80% | 1 | 14.29% |
| bjorn helgaas | bjorn helgaas | 13 | 7.39% | 1 | 14.29% |
| greg kroah-hartman | greg kroah-hartman | 10 | 5.68% | 1 | 14.29% |
| randy dunlap | randy dunlap | 1 | 0.57% | 1 | 14.29% |
| adrian bunk | adrian bunk | 1 | 0.57% | 1 | 14.29% |
| Total | 176 | 100.00% | 7 | 100.00% |
/*
* We have to call pci_eisa_init_early() before pnpacpi_init()/isapnp_init().
* Otherwise pnp resource will get enabled early and could prevent eisa
* to be initialized.
* Also need to make sure pci_eisa_init_early() is called after
* x86/pci_subsys_init().
* So need to use subsys_initcall_sync with it.
*/
static int __init pci_eisa_init_early(void)
{
struct pci_dev *dev = NULL;
int ret;
for_each_pci_dev(dev)
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_EISA) {
ret = pci_eisa_init(dev);
if (ret)
return ret;
}
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| yinghai lu | yinghai lu | 42 | 77.78% | 1 | 50.00% |
| marc zyngier | marc zyngier | 12 | 22.22% | 1 | 50.00% |
| Total | 54 | 100.00% | 2 | 100.00% |
subsys_initcall_sync(pci_eisa_init_early);
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| marc zyngier | marc zyngier | 125 | 47.89% | 2 | 22.22% |
| yinghai lu | yinghai lu | 108 | 41.38% | 2 | 22.22% |
| bjorn helgaas | bjorn helgaas | 13 | 4.98% | 1 | 11.11% |
| greg kroah-hartman | greg kroah-hartman | 10 | 3.83% | 1 | 11.11% |
| thierry vignaud | thierry vignaud | 3 | 1.15% | 1 | 11.11% |
| adrian bunk | adrian bunk | 1 | 0.38% | 1 | 11.11% |
| randy dunlap | randy dunlap | 1 | 0.38% | 1 | 11.11% |
| Total | 261 | 100.00% | 9 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.