Release 4.7 drivers/fmc/fmc-write-eeprom.c
/*
* Copyright (C) 2012 CERN (www.cern.ch)
* Author: Alessandro Rubini <rubini@gnudd.com>
*
* Released according to the GNU GPL, version 2 or any later version.
*
* This work is part of the White Rabbit project, a research effort led
* by CERN, the European Institute for Nuclear Research.
*/
#include <linux/module.h>
#include <linux/string.h>
#include <linux/firmware.h>
#include <linux/init.h>
#include <linux/fmc.h>
#include <asm/unaligned.h>
/*
* This module uses the firmware loader to program the whole or part
* of the FMC eeprom. The meat is in the _run functions. However, no
* default file name is provided, to avoid accidental mishaps. Also,
* you must pass the busid argument
*/
static struct fmc_driver fwe_drv;
FMC_PARAM_BUSID(fwe_drv);
/* The "file=" is like the generic "gateware=" used elsewhere */
static char *fwe_file[FMC_MAX_CARDS];
static int fwe_file_n;
module_param_array_named(file, fwe_file, charp, &fwe_file_n, 0444);
static int fwe_run_tlv(struct fmc_device *fmc, const struct firmware *fw,
int write)
{
const uint8_t *p = fw->data;
int len = fw->size;
uint16_t thislen, thisaddr;
int err;
/* format is: 'w' addr16 len16 data... */
while (len > 5) {
thisaddr = get_unaligned_le16(p+1);
thislen = get_unaligned_le16(p+3);
if (p[0] != 'w' || thislen + 5 > len) {
dev_err(&fmc->dev, "invalid tlv at offset %ti\n",
p - fw->data);
return -EINVAL;
}
err = 0;
if (write) {
dev_info(&fmc->dev, "write %i bytes at 0x%04x\n",
thislen, thisaddr);
err = fmc->op->write_ee(fmc, thisaddr, p + 5, thislen);
}
if (err < 0) {
dev_err(&fmc->dev, "write failure @0x%04x\n",
thisaddr);
return err;
}
p += 5 + thislen;
len -= 5 + thislen;
}
if (write)
dev_info(&fmc->dev, "write_eeprom: success\n");
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| alessandro rubini | alessandro rubini | 203 | 100.00% | 1 | 100.00% |
| Total | 203 | 100.00% | 1 | 100.00% |
static int fwe_run_bin(struct fmc_device *fmc, const struct firmware *fw)
{
int ret;
dev_info(&fmc->dev, "programming %zi bytes\n", fw->size);
ret = fmc->op->write_ee(fmc, 0, (void *)fw->data, fw->size);
if (ret < 0) {
dev_info(&fmc->dev, "write_eeprom: error %i\n", ret);
return ret;
}
dev_info(&fmc->dev, "write_eeprom: success\n");
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| alessandro rubini | alessandro rubini | 95 | 100.00% | 1 | 100.00% |
| Total | 95 | 100.00% | 1 | 100.00% |
static int fwe_run(struct fmc_device *fmc, const struct firmware *fw, char *s)
{
char *last4 = s + strlen(s) - 4;
int err;
if (!strcmp(last4, ".bin"))
return fwe_run_bin(fmc, fw);
if (!strcmp(last4, ".tlv")) {
err = fwe_run_tlv(fmc, fw, 0);
if (!err)
err = fwe_run_tlv(fmc, fw, 1);
return err;
}
dev_err(&fmc->dev, "invalid file name \"%s\"\n", s);
return -EINVAL;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| alessandro rubini | alessandro rubini | 113 | 100.00% | 1 | 100.00% |
| Total | 113 | 100.00% | 1 | 100.00% |
/*
* Programming is done at probe time. Morever, only those listed with
* busid= are programmed.
* card is probed for, only one is programmed. Unfortunately, it's
* difficult to know in advance when probing the first card if others
* are there.
*/
static int fwe_probe(struct fmc_device *fmc)
{
int err, index = 0;
const struct firmware *fw;
struct device *dev = &fmc->dev;
char *s;
if (!fwe_drv.busid_n) {
dev_err(dev, "%s: no busid passed, refusing all cards\n",
KBUILD_MODNAME);
return -ENODEV;
}
if (fmc->op->validate)
index = fmc->op->validate(fmc, &fwe_drv);
if (index < 0) {
pr_err("%s: refusing device \"%s\"\n", KBUILD_MODNAME,
dev_name(dev));
return -ENODEV;
}
if (index >= fwe_file_n) {
pr_err("%s: no filename for device index %i\n",
KBUILD_MODNAME, index);
return -ENODEV;
}
s = fwe_file[index];
if (!s) {
pr_err("%s: no filename for \"%s\" not programming\n",
KBUILD_MODNAME, dev_name(dev));
return -ENOENT;
}
err = request_firmware(&fw, s, dev);
if (err < 0) {
dev_err(&fmc->dev, "request firmware \"%s\": error %i\n",
s, err);
return err;
}
fwe_run(fmc, fw, s);
release_firmware(fw);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| alessandro rubini | alessandro rubini | 210 | 99.53% | 1 | 50.00% |
| jingoo han | jingoo han | 1 | 0.47% | 1 | 50.00% |
| Total | 211 | 100.00% | 2 | 100.00% |
static int fwe_remove(struct fmc_device *fmc)
{
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| alessandro rubini | alessandro rubini | 13 | 92.86% | 1 | 50.00% |
| jingoo han | jingoo han | 1 | 7.14% | 1 | 50.00% |
| Total | 14 | 100.00% | 2 | 100.00% |
static struct fmc_driver fwe_drv = {
.version = FMC_VERSION,
.driver.name = KBUILD_MODNAME,
.probe = fwe_probe,
.remove = fwe_remove,
/* no table, as the current match just matches everything */
};
static int fwe_init(void)
{
int ret;
ret = fmc_driver_register(&fwe_drv);
return ret;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| alessandro rubini | alessandro rubini | 22 | 100.00% | 1 | 100.00% |
| Total | 22 | 100.00% | 1 | 100.00% |
static void fwe_exit(void)
{
fmc_driver_unregister(&fwe_drv);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| alessandro rubini | alessandro rubini | 14 | 100.00% | 1 | 100.00% |
| Total | 14 | 100.00% | 1 | 100.00% |
module_init(fwe_init);
module_exit(fwe_exit);
MODULE_LICENSE("GPL");
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| alessandro rubini | alessandro rubini | 773 | 99.61% | 1 | 33.33% |
| jingoo han | jingoo han | 2 | 0.26% | 1 | 33.33% |
| joe perches | joe perches | 1 | 0.13% | 1 | 33.33% |
| Total | 776 | 100.00% | 3 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.