cregit-Linux how code gets into the kernel

Release 4.7 drivers/ide/cs5520.c

Directory: drivers/ide
/*
 *      IDE tuning and bus mastering support for the CS5510/CS5520
 *      chipsets
 *
 *      The CS5510/CS5520 are slightly unusual devices. Unlike the 
 *      typical IDE controllers they do bus mastering with the drive in
 *      PIO mode and smarter silicon.
 *
 *      The practical upshot of this is that we must always tune the
 *      drive for the right PIO mode. We must also ignore all the blacklists
 *      and the drive bus mastering DMA information.
 *
 *      *** This driver is strictly experimental ***
 *
 *      (c) Copyright Red Hat Inc 2002
 * 
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * For the avoidance of doubt the "preferred form" of this code is one which
 * is in an open non patent encumbered format. Where cryptographic key signing
 * forms part of the process of creating an executable the information
 * including keys needed to generate an equivalently functional executable
 * are deemed to be part of the source code.
 *
 */
 
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/ide.h>
#include <linux/dma-mapping.h>


#define DRV_NAME "cs5520"


struct pio_clocks
{
	
int address;
	
int assert;
	
int recovery;
};


static struct pio_clocks cs5520_pio_clocks[]={
	{3, 6, 11},
	{2, 5, 6},
	{1, 4, 3},
	{1, 3, 2},
	{1, 2, 1}
};


static void cs5520_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) { struct pci_dev *pdev = to_pci_dev(hwif->dev); int controller = drive->dn > 1 ? 1 : 0; const u8 pio = drive->pio_mode - XFER_PIO_0; /* 8bit CAT/CRT - 8bit command timing for channel */ pci_write_config_byte(pdev, 0x62 + controller, (cs5520_pio_clocks[pio].recovery << 4) | (cs5520_pio_clocks[pio].assert)); /* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */ /* FIXME: should these use address ? */ /* Data read timing */ pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1), (cs5520_pio_clocks[pio].recovery << 4) | (cs5520_pio_clocks[pio].assert)); /* Write command timing */ pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1), (cs5520_pio_clocks[pio].recovery << 4) | (cs5520_pio_clocks[pio].assert)); }

Contributors

PersonTokensPropCommitsCommitProp
alan coxalan cox13986.34%120.00%
bartlomiej zolnierkiewiczbartlomiej zolnierkiewicz2213.66%480.00%
Total161100.00%5100.00%


static void cs5520_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) { printk(KERN_ERR "cs55x0: bad ide timing.\n"); drive->pio_mode = XFER_PIO_0 + 0; cs5520_set_pio_mode(hwif, drive); }

Contributors

PersonTokensPropCommitsCommitProp
bartlomiej zolnierkiewiczbartlomiej zolnierkiewicz2365.71%480.00%
alan coxalan cox1234.29%120.00%
Total35100.00%5100.00%

static const struct ide_port_ops cs5520_port_ops = { .set_pio_mode = cs5520_set_pio_mode, .set_dma_mode = cs5520_set_dma_mode, }; static const struct ide_port_info cyrix_chipset = { .name = DRV_NAME, .enablebits = { { 0x60, 0x01, 0x01 }, { 0x60, 0x02, 0x02 } }, .port_ops = &cs5520_port_ops, .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_CS5520, .pio_mask = ATA_PIO4, }; /* * The 5510/5520 are a bit weird. They don't quite set up the way * the PCI helper layer expects so we must do much of the set up * work longhand. */
static int cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id) { const struct ide_port_info *d = &cyrix_chipset; struct ide_hw hw[2], *hws[] = { NULL, NULL }; ide_setup_pci_noise(dev, d); /* We must not grab the entire device, it has 'ISA' space in its * BARS too and we will freak out other bits of the kernel */ if (pci_enable_device_io(dev)) { printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name); return -ENODEV; } pci_set_master(dev); if (dma_set_mask(&dev->dev, DMA_BIT_MASK(32))) { printk(KERN_WARNING "%s: No suitable DMA available.\n", d->name); return -ENODEV; } /* * Now the chipset is configured we can let the core * do all the device setup for us */ ide_pci_setup_ports(dev, d, &hw[0], &hws[0]); hw[0].irq = 14; hw[1].irq = 15; return ide_host_add(d, hws, 2, NULL); }

Contributors

PersonTokensPropCommitsCommitProp
bartlomiej zolnierkiewiczbartlomiej zolnierkiewicz7043.75%1263.16%
alan coxalan cox6943.12%15.26%
david s. millerdavid s. miller95.62%15.26%
yang hongyangyang hongyang42.50%15.26%
quentin lambertquentin lambert42.50%15.26%
benjamin herrenschmidtbenjamin herrenschmidt21.25%210.53%
amit gudamit gud21.25%15.26%
Total160100.00%19100.00%

static const struct pci_device_id cs5520_pci_tbl[] = { { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), 0 }, { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), 1 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl); static struct pci_driver cs5520_pci_driver = { .name = "Cyrix_IDE", .id_table = cs5520_pci_tbl, .probe = cs5520_init_one, .suspend = ide_pci_suspend, .resume = ide_pci_resume, };
static int __init cs5520_ide_init(void) { return ide_pci_register_driver(&cs5520_pci_driver); }

Contributors

PersonTokensPropCommitsCommitProp
alan coxalan cox1487.50%133.33%
bartlomiej zolnierkiewiczbartlomiej zolnierkiewicz212.50%266.67%
Total16100.00%3100.00%

module_init(cs5520_ide_init); MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("PCI driver module for Cyrix 5510/5520 IDE"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
alan coxalan cox38160.96%12.78%
bartlomiej zolnierkiewiczbartlomiej zolnierkiewicz22135.36%2775.00%
david s. millerdavid s. miller91.44%12.78%
quentin lambertquentin lambert40.64%12.78%
yang hongyangyang hongyang40.64%12.78%
benjamin herrenschmidtbenjamin herrenschmidt20.32%25.56%
amit gudamit gud20.32%12.78%
deepak saxenadeepak saxena10.16%12.78%
tobias klausertobias klauser10.16%12.78%
greg kroah-hartmangreg kroah-hartman0.00%00.00%
Total625100.00%36100.00%
Directory: drivers/ide
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}