cregit-Linux how code gets into the kernel

Release 4.7 drivers/iio/gyro/adis16260.c

Directory: drivers/iio/gyro
/*
 * ADIS16260/ADIS16265 Programmable Digital Gyroscope Sensor Driver
 *
 * Copyright 2010 Analog Devices Inc.
 *
 * Licensed under the GPL-2 or later.
 */

#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/sysfs.h>
#include <linux/module.h>

#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/imu/adis.h>


#define ADIS16260_STARTUP_DELAY	220 
/* ms */


#define ADIS16260_FLASH_CNT  0x00 
/* Flash memory write count */

#define ADIS16260_SUPPLY_OUT 0x02 
/* Power supply measurement */

#define ADIS16260_GYRO_OUT   0x04 
/* X-axis gyroscope output */

#define ADIS16260_AUX_ADC    0x0A 
/* analog input channel measurement */

#define ADIS16260_TEMP_OUT   0x0C 
/* internal temperature measurement */

#define ADIS16260_ANGL_OUT   0x0E 
/* angle displacement */

#define ADIS16260_GYRO_OFF   0x14 
/* Calibration, offset/bias adjustment */

#define ADIS16260_GYRO_SCALE 0x16 
/* Calibration, scale adjustment */

#define ADIS16260_ALM_MAG1   0x20 
/* Alarm 1 magnitude/polarity setting */

#define ADIS16260_ALM_MAG2   0x22 
/* Alarm 2 magnitude/polarity setting */

#define ADIS16260_ALM_SMPL1  0x24 
/* Alarm 1 dynamic rate of change setting */

#define ADIS16260_ALM_SMPL2  0x26 
/* Alarm 2 dynamic rate of change setting */

#define ADIS16260_ALM_CTRL   0x28 
/* Alarm control */

#define ADIS16260_AUX_DAC    0x30 
/* Auxiliary DAC data */

#define ADIS16260_GPIO_CTRL  0x32 
/* Control, digital I/O line */

#define ADIS16260_MSC_CTRL   0x34 
/* Control, data ready, self-test settings */

#define ADIS16260_SMPL_PRD   0x36 
/* Control, internal sample rate */

#define ADIS16260_SENS_AVG   0x38 
/* Control, dynamic range, filtering */

#define ADIS16260_SLP_CNT    0x3A 
/* Control, sleep mode initiation */

#define ADIS16260_DIAG_STAT  0x3C 
/* Diagnostic, error flags */

#define ADIS16260_GLOB_CMD   0x3E 
/* Control, global commands */

#define ADIS16260_LOT_ID1    0x52 
/* Lot Identification Code 1 */

#define ADIS16260_LOT_ID2    0x54 
/* Lot Identification Code 2 */

#define ADIS16260_PROD_ID    0x56 
/* Product identifier;
                                   * convert to decimal = 16,265/16,260 */

#define ADIS16260_SERIAL_NUM 0x58 
/* Serial number */


#define ADIS16260_ERROR_ACTIVE			(1<<14)

#define ADIS16260_NEW_DATA			(1<<15)

/* MSC_CTRL */

#define ADIS16260_MSC_CTRL_MEM_TEST		(1<<11)
/* Internal self-test enable */

#define ADIS16260_MSC_CTRL_INT_SELF_TEST	(1<<10)

#define ADIS16260_MSC_CTRL_NEG_SELF_TEST	(1<<9)

#define ADIS16260_MSC_CTRL_POS_SELF_TEST	(1<<8)

#define ADIS16260_MSC_CTRL_DATA_RDY_EN		(1<<2)

#define ADIS16260_MSC_CTRL_DATA_RDY_POL_HIGH	(1<<1)

#define ADIS16260_MSC_CTRL_DATA_RDY_DIO2	(1<<0)

/* SMPL_PRD */
/* Time base (tB): 0 = 1.953 ms, 1 = 60.54 ms */

#define ADIS16260_SMPL_PRD_TIME_BASE	(1<<7)

#define ADIS16260_SMPL_PRD_DIV_MASK	0x7F

/* SLP_CNT */

#define ADIS16260_SLP_CNT_POWER_OFF     0x80

/* DIAG_STAT */

#define ADIS16260_DIAG_STAT_ALARM2	(1<<9)

#define ADIS16260_DIAG_STAT_ALARM1	(1<<8)

#define ADIS16260_DIAG_STAT_FLASH_CHK_BIT	6

#define ADIS16260_DIAG_STAT_SELF_TEST_BIT	5

#define ADIS16260_DIAG_STAT_OVERFLOW_BIT	4

#define ADIS16260_DIAG_STAT_SPI_FAIL_BIT	3

#define ADIS16260_DIAG_STAT_FLASH_UPT_BIT	2

#define ADIS16260_DIAG_STAT_POWER_HIGH_BIT	1

#define ADIS16260_DIAG_STAT_POWER_LOW_BIT	0

/* GLOB_CMD */

#define ADIS16260_GLOB_CMD_SW_RESET	(1<<7)

#define ADIS16260_GLOB_CMD_FLASH_UPD	(1<<3)

#define ADIS16260_GLOB_CMD_DAC_LATCH	(1<<2)

#define ADIS16260_GLOB_CMD_FAC_CALIB	(1<<1)

#define ADIS16260_GLOB_CMD_AUTO_NULL	(1<<0)


#define ADIS16260_SPI_SLOW	(u32)(300 * 1000)

#define ADIS16260_SPI_BURST	(u32)(1000 * 1000)

#define ADIS16260_SPI_FAST	(u32)(2000 * 1000)

/* At the moment triggers are only used for ring buffer
 * filling. This may change!
 */


#define ADIS16260_SCAN_GYRO	0

#define ADIS16260_SCAN_SUPPLY	1

#define ADIS16260_SCAN_AUX_ADC	2

#define ADIS16260_SCAN_TEMP	3

#define ADIS16260_SCAN_ANGL	4


struct adis16260_chip_info {
	
unsigned int gyro_max_val;
	
unsigned int gyro_max_scale;
	
const struct iio_chan_spec *channels;
	
unsigned int num_channels;
};


struct adis16260 {
	
const struct adis16260_chip_info *info;

	
struct adis adis;
};


enum adis16260_type {
	
ADIS16251,
	
ADIS16260,
	
ADIS16266,
};


static const struct iio_chan_spec adis16260_channels[] = {
	ADIS_GYRO_CHAN(X, ADIS16260_GYRO_OUT, ADIS16260_SCAN_GYRO,
		BIT(IIO_CHAN_INFO_CALIBBIAS) |
		BIT(IIO_CHAN_INFO_CALIBSCALE),
		BIT(IIO_CHAN_INFO_SAMP_FREQ), 14),
	ADIS_INCLI_CHAN(X, ADIS16260_ANGL_OUT, ADIS16260_SCAN_ANGL, 0,
		BIT(IIO_CHAN_INFO_SAMP_FREQ), 14),
	ADIS_TEMP_CHAN(ADIS16260_TEMP_OUT, ADIS16260_SCAN_TEMP,
		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
	ADIS_SUPPLY_CHAN(ADIS16260_SUPPLY_OUT, ADIS16260_SCAN_SUPPLY,
		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
	ADIS_AUX_ADC_CHAN(ADIS16260_AUX_ADC, ADIS16260_SCAN_AUX_ADC,
		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
	IIO_CHAN_SOFT_TIMESTAMP(5),
};


static const struct iio_chan_spec adis16266_channels[] = {
	ADIS_GYRO_CHAN(X, ADIS16260_GYRO_OUT, ADIS16260_SCAN_GYRO,
		BIT(IIO_CHAN_INFO_CALIBBIAS) |
		BIT(IIO_CHAN_INFO_CALIBSCALE),
		BIT(IIO_CHAN_INFO_SAMP_FREQ), 14),
	ADIS_TEMP_CHAN(ADIS16260_TEMP_OUT, ADIS16260_SCAN_TEMP,
		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
	ADIS_SUPPLY_CHAN(ADIS16260_SUPPLY_OUT, ADIS16260_SCAN_SUPPLY,
		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
	ADIS_AUX_ADC_CHAN(ADIS16260_AUX_ADC, ADIS16260_SCAN_AUX_ADC,
		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
	IIO_CHAN_SOFT_TIMESTAMP(4),
};


static const struct adis16260_chip_info adis16260_chip_info_table[] = {
	[ADIS16251] = {
		.gyro_max_scale = 80,
		.gyro_max_val = IIO_RAD_TO_DEGREE(4368),
		.channels = adis16260_channels,
		.num_channels = ARRAY_SIZE(adis16260_channels),
        },
	[ADIS16260] = {
		.gyro_max_scale = 320,
		.gyro_max_val = IIO_RAD_TO_DEGREE(4368),
		.channels = adis16260_channels,
		.num_channels = ARRAY_SIZE(adis16260_channels),
        },
	[ADIS16266] = {
		.gyro_max_scale = 14000,
		.gyro_max_val = IIO_RAD_TO_DEGREE(3357),
		.channels = adis16266_channels,
		.num_channels = ARRAY_SIZE(adis16266_channels),
        },
};

/* Power down the device */

static int adis16260_stop_device(struct iio_dev *indio_dev) { struct adis16260 *adis16260 = iio_priv(indio_dev); int ret; u16 val = ADIS16260_SLP_CNT_POWER_OFF; ret = adis_write_reg_16(&adis16260->adis, ADIS16260_SLP_CNT, val); if (ret) dev_err(&indio_dev->dev, "problem with turning device off: SLP_CNT"); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
lars-peter clausenlars-peter clausen60100.00%1100.00%
Total60100.00%1100.00%

static const u8 adis16260_addresses[][2] = { [ADIS16260_SCAN_GYRO] = { ADIS16260_GYRO_OFF, ADIS16260_GYRO_SCALE }, };
static int adis16260_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct adis16260 *adis16260 = iio_priv(indio_dev); const struct adis16260_chip_info *info = adis16260->info; struct adis *adis = &adis16260->adis; int ret; u8 addr; s16 val16; switch (mask) { case IIO_CHAN_INFO_RAW: return adis_single_conversion(indio_dev, chan, ADIS16260_ERROR_ACTIVE, val); case IIO_CHAN_INFO_SCALE: switch (chan->type) { case IIO_ANGL_VEL: *val = info->gyro_max_scale; *val2 = info->gyro_max_val; return IIO_VAL_FRACTIONAL; case IIO_INCLI: *val = 0; *val2 = IIO_DEGREE_TO_RAD(36630); return IIO_VAL_INT_PLUS_MICRO; case IIO_VOLTAGE: if (chan->channel == 0) { *val = 1; *val2 = 831500; /* 1.8315 mV */ } else { *val = 0; *val2 = 610500; /* 610.5 uV */ } return IIO_VAL_INT_PLUS_MICRO; case IIO_TEMP: *val = 145; *val2 = 300000; /* 0.1453 C */ return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } case IIO_CHAN_INFO_OFFSET: *val = 250000 / 1453; /* 25 C = 0x00 */ return IIO_VAL_INT; case IIO_CHAN_INFO_CALIBBIAS: addr = adis16260_addresses[chan->scan_index][0]; ret = adis_read_reg_16(adis, addr, &val16); if (ret) return ret; *val = sign_extend32(val16, 11); return IIO_VAL_INT; case IIO_CHAN_INFO_CALIBSCALE: addr = adis16260_addresses[chan->scan_index][1]; ret = adis_read_reg_16(adis, addr, &val16); if (ret) return ret; *val = val16; return IIO_VAL_INT; case IIO_CHAN_INFO_SAMP_FREQ: ret = adis_read_reg_16(adis, ADIS16260_SMPL_PRD, &val16); if (ret) return ret; if (spi_get_device_id(adis->spi)->driver_data) /* If an adis16251 */ *val = (val16 & ADIS16260_SMPL_PRD_TIME_BASE) ? 8 : 256; else *val = (val16 & ADIS16260_SMPL_PRD_TIME_BASE) ? 66 : 2048; *val /= (val16 & ADIS16260_SMPL_PRD_DIV_MASK) + 1; return IIO_VAL_INT; } return -EINVAL; }

Contributors

PersonTokensPropCommitsCommitProp
jonathan cameronjonathan cameron27972.85%642.86%
lars-peter clausenlars-peter clausen10326.89%750.00%
barry songbarry song10.26%17.14%
Total383100.00%14100.00%


static int adis16260_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { struct adis16260 *adis16260 = iio_priv(indio_dev); struct adis *adis = &adis16260->adis; int ret; u8 addr; u8 t; switch (mask) { case IIO_CHAN_INFO_CALIBBIAS: if (val < -2048 || val >= 2048) return -EINVAL; addr = adis16260_addresses[chan->scan_index][0]; return adis_write_reg_16(adis, addr, val); case IIO_CHAN_INFO_CALIBSCALE: if (val < 0 || val >= 4096) return -EINVAL; addr = adis16260_addresses[chan->scan_index][1]; return adis_write_reg_16(adis, addr, val); case IIO_CHAN_INFO_SAMP_FREQ: mutex_lock(&indio_dev->mlock); if (spi_get_device_id(adis->spi)->driver_data) t = 256 / val; else t = 2048 / val; if (t > ADIS16260_SMPL_PRD_DIV_MASK) t = ADIS16260_SMPL_PRD_DIV_MASK; else if (t > 0) t--; if (t >= 0x0A) adis->spi->max_speed_hz = ADIS16260_SPI_SLOW; else adis->spi->max_speed_hz = ADIS16260_SPI_FAST; ret = adis_write_reg_8(adis, ADIS16260_SMPL_PRD, t); mutex_unlock(&indio_dev->mlock); return ret; } return -EINVAL; }

Contributors

PersonTokensPropCommitsCommitProp
jonathan cameronjonathan cameron18977.46%457.14%
lars-peter clausenlars-peter clausen5522.54%342.86%
Total244100.00%7100.00%

static const struct iio_info adis16260_info = { .read_raw = &adis16260_read_raw, .write_raw = &adis16260_write_raw, .update_scan_mode = adis_update_scan_mode, .driver_module = THIS_MODULE, }; static const char * const adis1620_status_error_msgs[] = { [ADIS16260_DIAG_STAT_FLASH_CHK_BIT] = "Flash checksum error", [ADIS16260_DIAG_STAT_SELF_TEST_BIT] = "Self test error", [ADIS16260_DIAG_STAT_OVERFLOW_BIT] = "Sensor overrange", [ADIS16260_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure", [ADIS16260_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed", [ADIS16260_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 5.25", [ADIS16260_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 4.75", }; static const struct adis_data adis16260_data = { .write_delay = 30, .read_delay = 30, .msc_ctrl_reg = ADIS16260_MSC_CTRL, .glob_cmd_reg = ADIS16260_GLOB_CMD, .diag_stat_reg = ADIS16260_DIAG_STAT, .self_test_mask = ADIS16260_MSC_CTRL_MEM_TEST, .startup_delay = ADIS16260_STARTUP_DELAY, .status_error_msgs = adis1620_status_error_msgs, .status_error_mask = BIT(ADIS16260_DIAG_STAT_FLASH_CHK_BIT) | BIT(ADIS16260_DIAG_STAT_SELF_TEST_BIT) | BIT(ADIS16260_DIAG_STAT_OVERFLOW_BIT) | BIT(ADIS16260_DIAG_STAT_SPI_FAIL_BIT) | BIT(ADIS16260_DIAG_STAT_FLASH_UPT_BIT) | BIT(ADIS16260_DIAG_STAT_POWER_HIGH_BIT) | BIT(ADIS16260_DIAG_STAT_POWER_LOW_BIT), };
static int adis16260_probe(struct spi_device *spi) { const struct spi_device_id *id; struct adis16260 *adis16260; struct iio_dev *indio_dev; int ret; id = spi_get_device_id(spi); if (!id) return -ENODEV; /* setup the industrialio driver allocated elements */ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adis16260)); if (!indio_dev) return -ENOMEM; adis16260 = iio_priv(indio_dev); /* this is only used for removal purposes */ spi_set_drvdata(spi, indio_dev); adis16260->info = &adis16260_chip_info_table[id->driver_data]; indio_dev->name = id->name; indio_dev->dev.parent = &spi->dev; indio_dev->info = &adis16260_info; indio_dev->channels = adis16260->info->channels; indio_dev->num_channels = adis16260->info->num_channels; indio_dev->modes = INDIO_DIRECT_MODE; ret = adis_init(&adis16260->adis, indio_dev, spi, &adis16260_data); if (ret) return ret; ret = adis_setup_buffer_and_trigger(&adis16260->adis, indio_dev, NULL); if (ret) return ret; /* Get the device into a sane initial state */ ret = adis_initial_startup(&adis16260->adis); if (ret) goto error_cleanup_buffer_trigger; ret = iio_device_register(indio_dev); if (ret) goto error_cleanup_buffer_trigger; return 0; error_cleanup_buffer_trigger: adis_cleanup_buffer_and_trigger(&adis16260->adis, indio_dev); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
barry songbarry song8634.96%17.14%
lars-peter clausenlars-peter clausen8634.96%428.57%
jonathan cameronjonathan cameron5923.98%857.14%
sachin kamatsachin kamat156.10%17.14%
Total246100.00%14100.00%


static int adis16260_remove(struct spi_device *spi) { struct iio_dev *indio_dev = spi_get_drvdata(spi); struct adis16260 *adis16260 = iio_priv(indio_dev); iio_device_unregister(indio_dev); adis16260_stop_device(indio_dev); adis_cleanup_buffer_and_trigger(&adis16260->adis, indio_dev); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
barry songbarry song3666.67%120.00%
lars-peter clausenlars-peter clausen1629.63%360.00%
jonathan cameronjonathan cameron23.70%120.00%
Total54100.00%5100.00%

/* * These parts do not need to be differentiated until someone adds * support for the on chip filtering. */ static const struct spi_device_id adis16260_id[] = { {"adis16260", ADIS16260}, {"adis16265", ADIS16260}, {"adis16266", ADIS16266}, {"adis16250", ADIS16260}, {"adis16255", ADIS16260}, {"adis16251", ADIS16251}, {} }; MODULE_DEVICE_TABLE(spi, adis16260_id); static struct spi_driver adis16260_driver = { .driver = { .name = "adis16260", }, .probe = adis16260_probe, .remove = adis16260_remove, .id_table = adis16260_id, }; module_spi_driver(adis16260_driver); MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); MODULE_DESCRIPTION("Analog Devices ADIS16260/5 Digital Gyroscope Sensor"); MODULE_LICENSE("GPL v2");

Overall Contributors

PersonTokensPropCommitsCommitProp
lars-peter clausenlars-peter clausen105854.90%1544.12%
jonathan cameronjonathan cameron64533.47%1544.12%
barry songbarry song20510.64%12.94%
sachin kamatsachin kamat150.78%12.94%
paul gortmakerpaul gortmaker30.16%12.94%
michael hennerichmichael hennerich10.05%12.94%
Total1927100.00%34100.00%
Directory: drivers/iio/gyro
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}