Release 4.7 drivers/input/keyboard/hilkbd.c

/*
 *  linux/drivers/hil/hilkbd.c
 *
 *  Copyright (C) 1998 Philip Blundell <philb@gnu.org>
 *  Copyright (C) 1999 Matthew Wilcox <willy@bofh.ai>
 *  Copyright (C) 1999-2007 Helge Deller <deller@gmx.de>
 *
 *  Very basic HP Human Interface Loop (HIL) driver.
 *  This driver handles the keyboard on HP300 (m68k) and on some
 *  HP700 (parisc) series machines.
 *
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License version 2.  See the file COPYING in the main directory of this
 * archive for more details.
 */

#include <linux/pci_ids.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/input.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/hil.h>
#include <linux/io.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <asm/irq.h>
#ifdef CONFIG_HP300
#include <asm/hwtest.h>
#endif


MODULE_AUTHOR("Philip Blundell, Matthew Wilcox, Helge Deller");
MODULE_DESCRIPTION("HIL keyboard driver (basic functionality)");
MODULE_LICENSE("GPL v2");


#if defined(CONFIG_PARISC)

 #include <asm/io.h>
 #include <asm/hardware.h>
 #include <asm/parisc-device.h>
 
static unsigned long hil_base;	
/* HPA for the HIL device */
 
static unsigned int hil_irq;
 
#define HILBASE		hil_base 
/* HPPA (parisc) port address */
 
#define HIL_DATA		0x800
 
#define HIL_CMD		0x801
 
#define HIL_IRQ		hil_irq
 
#define hil_readb(p)		gsc_readb(p)
 
#define hil_writeb(v,p)	gsc_writeb((v),(p))

#elif defined(CONFIG_HP300)

 
#define HILBASE		0xf0428000UL 
/* HP300 (m68k) port address */
 
#define HIL_DATA		0x1
 
#define HIL_CMD		0x3
 
#define HIL_IRQ		2
 
#define hil_readb(p)		readb(p)
 
#define hil_writeb(v,p)	writeb((v),(p))

#else
#error "HIL is not supported on this platform"
#endif



/* HIL helper functions */


#define hil_busy()              (hil_readb(HILBASE + HIL_CMD) & HIL_BUSY)

#define hil_data_available()    (hil_readb(HILBASE + HIL_CMD) & HIL_DATA_RDY)

#define hil_status()            (hil_readb(HILBASE + HIL_CMD))

#define hil_command(x)          do { hil_writeb((x), HILBASE + HIL_CMD); } while (0)

#define hil_read_data()         (hil_readb(HILBASE + HIL_DATA))

#define hil_write_data(x)       do { hil_writeb((x), HILBASE + HIL_DATA); } while (0)

/* HIL constants */


#define	HIL_BUSY		0x02

#define	HIL_DATA_RDY		0x01


#define	HIL_SETARD		0xA0		
/* set auto-repeat delay */

#define	HIL_SETARR		0xA2		
/* set auto-repeat rate */

#define	HIL_SETTONE		0xA3		
/* set tone generator */

#define	HIL_CNMT		0xB2		
/* clear nmi */

#define	HIL_INTON		0x5C		
/* Turn on interrupts. */

#define	HIL_INTOFF		0x5D		
/* Turn off interrupts. */


#define	HIL_READKBDSADR		0xF9

#define	HIL_WRITEKBDSADR	0xE9


static unsigned int hphilkeyb_keycode[HIL_KEYCODES_SET1_TBLSIZE] __read_mostly =
	{ HIL_KEYCODES_SET1 };

/* HIL structure */
static struct {
	
struct input_dev *dev;

	
unsigned int curdev;

	
unsigned char s;
	
unsigned char c;
	
int valid;

	
unsigned char data[16];
	
unsigned int ptr;
	
spinlock_t lock;

	
void *dev_id;	/* native bus device */
} 
hil_dev;




static void poll_finished(void)
{
	int down;
	int key;
	unsigned char scode;

	switch (hil_dev.data[0]) {
	case 0x40:
		down = (hil_dev.data[1] & 1) == 0;
		scode = hil_dev.data[1] >> 1;
		key = hphilkeyb_keycode[scode];
		input_report_key(hil_dev.dev, key, down);
		break;
	}
	hil_dev.curdev = 0;
}


Contributors
Person
Tokens
Prop
Commits
CommitProp
helge deller
helge deller
83
100.00%
1
100.00%
Total
83
100.00%
1
100.00%



static inline void handle_status(unsigned char s, unsigned char c)
{
	if (c & 0x8) {
		/* End of block */
		if (c & 0x10)
			poll_finished();
	} else {
		if (c & 0x10) {
			if (hil_dev.curdev)
				poll_finished();  /* just in case */
			hil_dev.curdev = c & 7;
			hil_dev.ptr = 0;
		}
	}
}


Contributors
Person
Tokens
Prop
Commits
CommitProp
helge deller
helge deller
68
100.00%
1
100.00%
Total
68
100.00%
1
100.00%



static inline void handle_data(unsigned char s, unsigned char c)
{
	if (hil_dev.curdev) {
		hil_dev.data[hil_dev.ptr++] = c;
		hil_dev.ptr &= 15;
	}
}


Contributors
Person
Tokens
Prop
Commits
CommitProp
helge deller
helge deller
41
100.00%
1
100.00%
Total
41
100.00%
1
100.00%

/* handle HIL interrupts */


static irqreturn_t hil_interrupt(int irq, void *handle)
{
	unsigned char s, c;

	s = hil_status();
	c = hil_read_data();

	switch (s >> 4) {
	case 0x5:
		handle_status(s, c);
		break;
	case 0x6:
		handle_data(s, c);
		break;
	case 0x4:
		hil_dev.s = s;
		hil_dev.c = c;
		mb();
		hil_dev.valid = 1;
		break;
	}
	return IRQ_HANDLED;
}


Contributors
Person
Tokens
Prop
Commits
CommitProp
helge deller
helge deller
87
100.00%
1
100.00%
Total
87
100.00%
1
100.00%

/* send a command to the HIL */


static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len)
{
	unsigned long flags;

	spin_lock_irqsave(&hil_dev.lock, flags);
	while (hil_busy())
		/* wait */;
	hil_command(cmd);
	while (len--) {
		while (hil_busy())
			/* wait */;
		hil_write_data(*(data++));
	}
	spin_unlock_irqrestore(&hil_dev.lock, flags);
}


Contributors
Person
Tokens
Prop
Commits
CommitProp
helge deller
helge deller
78
100.00%
1
100.00%
Total
78
100.00%
1
100.00%

/* initialize HIL */


static int hil_keyb_init(void)
{
	unsigned char c;
	unsigned int i, kbid;
	wait_queue_head_t hil_wait;
	int err;

	if (hil_dev.dev)
		return -ENODEV; /* already initialized */

	init_waitqueue_head(&hil_wait);
	spin_lock_init(&hil_dev.lock);

	hil_dev.dev = input_allocate_device();
	if (!hil_dev.dev)
		return -ENOMEM;

	err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id);
	if (err) {
		printk(KERN_ERR "HIL: Can't get IRQ\n");
		goto err1;
	}

	/* Turn on interrupts */
	hil_do(HIL_INTON, NULL, 0);

	/* Look for keyboards */
	hil_dev.valid = 0;	/* clear any pending data */
	hil_do(HIL_READKBDSADR, NULL, 0);

	wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3 * HZ);
	if (!hil_dev.valid)
		printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n");

	c = hil_dev.c;
	hil_dev.valid = 0;
	if (c == 0) {
		kbid = -1;
		printk(KERN_WARNING "HIL: no keyboard present\n");
	} else {
		kbid = ffz(~c);
		printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid);
	}

	/* set it to raw mode */
	c = 0;
	hil_do(HIL_WRITEKBDSADR, &c, 1);

	for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++)
		if (hphilkeyb_keycode[i] != KEY_RESERVED)
			__set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit);

	hil_dev.dev->evbit[0]	= BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
	hil_dev.dev->ledbit[0]	= BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) |
		BIT_MASK(LED_SCROLLL);
	hil_dev.dev->keycodemax	= HIL_KEYCODES_SET1_TBLSIZE;
	hil_dev.dev->keycodesize= sizeof(hphilkeyb_keycode[0]);
	hil_dev.dev->keycode	= hphilkeyb_keycode;
	hil_dev.dev->name	= "HIL keyboard";
	hil_dev.dev->phys	= "hpkbd/input0";

	hil_dev.dev->id.bustype	= BUS_HIL;
	hil_dev.dev->id.vendor	= PCI_VENDOR_ID_HP;
	hil_dev.dev->id.product	= 0x0001;
	hil_dev.dev->id.version	= 0x0010;

	err = input_register_device(hil_dev.dev);
	if (err) {
		printk(KERN_ERR "HIL: Can't register device\n");
		goto err2;
	}

	printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n",
	       hil_dev.dev->name, kbid, HILBASE, HIL_IRQ);

	return 0;

err2:
	hil_do(HIL_INTOFF, NULL, 0);
	free_irq(HIL_IRQ, hil_dev.dev_id);
err1:
	input_free_device(hil_dev.dev);
	hil_dev.dev = NULL;
	return err;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
helge deller
helge deller
401
86.24%
4
66.67%
cyrill gorcunov
cyrill gorcunov
59
12.69%
1
16.67%
jiri slaby
jiri slaby
5
1.08%
1
16.67%
Total
465
100.00%
6
100.00%



static void hil_keyb_exit(void)
{
	if (HIL_IRQ)
		free_irq(HIL_IRQ, hil_dev.dev_id);

	/* Turn off interrupts */
	hil_do(HIL_INTOFF, NULL, 0);

	input_unregister_device(hil_dev.dev);
	hil_dev.dev = NULL;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
cyrill gorcunov
cyrill gorcunov
25
56.82%
1
33.33%
helge deller
helge deller
19
43.18%
2
66.67%
Total
44
100.00%
3
100.00%

#if defined(CONFIG_PARISC)


static int hil_probe_chip(struct parisc_device *dev)
{
	/* Only allow one HIL keyboard */
	if (hil_dev.dev)
		return -ENODEV;

	if (!dev->irq) {
		printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n",
			(void *)dev->hpa.start);
		return -ENODEV;
	}

	hil_base = dev->hpa.start;
	hil_irq  = dev->irq;
	hil_dev.dev_id = dev;

	printk(KERN_INFO "Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq);

	return hil_keyb_init();
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
helge deller
helge deller
81
95.29%
2
66.67%
matthew wilcox
matthew wilcox
4
4.71%
1
33.33%
Total
85
100.00%
3
100.00%



static int hil_remove_chip(struct parisc_device *dev)
{
	hil_keyb_exit();

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
helge deller
helge deller
17
100.00%
1
100.00%
Total
17
100.00%
1
100.00%


static struct parisc_device_id hil_tbl[] = {
	{ HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 },
	{ 0, }
};

#if 0
/* Disabled to avoid conflicts with the HP SDC HIL drivers */
MODULE_DEVICE_TABLE(parisc, hil_tbl);
#endif


static struct parisc_driver hil_driver = {
	.name		= "hil",
	.id_table	= hil_tbl,
	.probe		= hil_probe_chip,
	.remove		= hil_remove_chip,
};



static int __init hil_init(void)
{
	return register_parisc_driver(&hil_driver);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
helge deller
helge deller
16
100.00%
1
100.00%
Total
16
100.00%
1
100.00%



static void __exit hil_exit(void)
{
	unregister_parisc_driver(&hil_driver);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
helge deller
helge deller
15
100.00%
2
100.00%
Total
15
100.00%
2
100.00%

#else /* !CONFIG_PARISC */



static int __init hil_init(void)
{
	int error;

	/* Only allow one HIL keyboard */
	if (hil_dev.dev)
		return -EBUSY;

	if (!MACH_IS_HP300)
		return -ENODEV;

	if (!hwreg_present((void *)(HILBASE + HIL_DATA))) {
		printk(KERN_ERR "HIL: hardware register was not found\n");
		return -ENODEV;
	}

	if (!request_region(HILBASE + HIL_DATA, 2, "hil")) {
		printk(KERN_ERR "HIL: IOPORT region already used\n");
		return -EIO;
	}

	error = hil_keyb_init();
	if (error) {
		release_region(HILBASE + HIL_DATA, 2);
		return error;
	}

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
helge deller
helge deller
112
100.00%
3
100.00%
Total
112
100.00%
3
100.00%



static void __exit hil_exit(void)
{
	hil_keyb_exit();
	release_region(HILBASE + HIL_DATA, 2);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
helge deller
helge deller
21
100.00%
2
100.00%
Total
21
100.00%
2
100.00%

#endif /* CONFIG_PARISC */


module_init(hil_init);

module_exit(hil_exit);
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
helge deller
helge deller
1403
92.36%
4
33.33%
cyrill gorcunov
cyrill gorcunov
86
5.66%
1
8.33%
al viro
al viro
14
0.92%
1
8.33%
matthew wilcox
matthew wilcox
6
0.39%
3
25.00%
jiri slaby
jiri slaby
5
0.33%
1
8.33%
alexey dobriyan
alexey dobriyan
3
0.20%
1
8.33%
geert uytterhoeven
geert uytterhoeven
2
0.13%
1
8.33%
Total
1519
100.00%
12
100.00%
  
Directory: drivers/input/keyboard

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.