cregit-Linux how code gets into the kernel

Release 4.7 drivers/input/keyboard/qt1070.c

/*
 *  Atmel AT42QT1070 QTouch Sensor Controller
 *
 *  Copyright (C) 2011 Atmel
 *
 *  Authors: Bo Shen <voice.shen@atmel.com>
 *
 *  Base on AT42QT2160 driver by:
 *  Raphael Derosso Pereira <raphaelpereira@gmail.com>
 *  Copyright (C) 2009
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/delay.h>

/* Address for each register */

#define CHIP_ID            0x00

#define QT1070_CHIP_ID     0x2E


#define FW_VERSION         0x01

#define QT1070_FW_VERSION  0x15


#define DET_STATUS         0x02


#define KEY_STATUS         0x03

/* Calibrate */

#define CALIBRATE_CMD      0x38

#define QT1070_CAL_TIME    200

/* Reset */

#define RESET              0x39

#define QT1070_RESET_TIME  255

/* AT42QT1070 support up to 7 keys */

static const unsigned short qt1070_key2code[] = {
	KEY_0, KEY_1, KEY_2, KEY_3,
	KEY_4, KEY_5, KEY_6,
};


struct qt1070_data {
	
struct i2c_client *client;
	
struct input_dev *input;
	
unsigned int irq;
	
unsigned short keycodes[ARRAY_SIZE(qt1070_key2code)];
	
u8 last_keys;
};


static int qt1070_read(struct i2c_client *client, u8 reg) { int ret; ret = i2c_smbus_read_byte_data(client, reg); if (ret < 0) dev_err(&client->dev, "can not read register, returned %d\n", ret); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
bo shenbo shen47100.00%1100.00%
Total47100.00%1100.00%


static int qt1070_write(struct i2c_client *client, u8 reg, u8 data) { int ret; ret = i2c_smbus_write_byte_data(client, reg, data); if (ret < 0) dev_err(&client->dev, "can not write register, returned %d\n", ret); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
bo shenbo shen52100.00%1100.00%
Total52100.00%1100.00%


static bool qt1070_identify(struct i2c_client *client) { int id, ver; /* Read Chip ID */ id = qt1070_read(client, CHIP_ID); if (id != QT1070_CHIP_ID) { dev_err(&client->dev, "ID %d not supported\n", id); return false; } /* Read firmware version */ ver = qt1070_read(client, FW_VERSION); if (ver < 0) { dev_err(&client->dev, "could not read the firmware version\n"); return false; } dev_info(&client->dev, "AT42QT1070 firmware version %x\n", ver); return true; }

Contributors

PersonTokensPropCommitsCommitProp
bo shenbo shen95100.00%1100.00%
Total95100.00%1100.00%


static irqreturn_t qt1070_interrupt(int irq, void *dev_id) { struct qt1070_data *data = dev_id; struct i2c_client *client = data->client; struct input_dev *input = data->input; int i; u8 new_keys, keyval, mask = 0x01; /* Read the detected status register, thus clearing interrupt */ qt1070_read(client, DET_STATUS); /* Read which key changed */ new_keys = qt1070_read(client, KEY_STATUS); for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) { keyval = new_keys & mask; if ((data->last_keys & mask) != keyval) input_report_key(input, data->keycodes[i], keyval); mask <<= 1; } input_sync(input); data->last_keys = new_keys; return IRQ_HANDLED; }

Contributors

PersonTokensPropCommitsCommitProp
bo shenbo shen136100.00%1100.00%
Total136100.00%1100.00%


static int qt1070_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct qt1070_data *data; struct input_dev *input; int i; int err; err = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE); if (!err) { dev_err(&client->dev, "%s adapter not supported\n", dev_driver_string(&client->adapter->dev)); return -ENODEV; } if (!client->irq) { dev_err(&client->dev, "please assign the irq to this device\n"); return -EINVAL; } /* Identify the qt1070 chip */ if (!qt1070_identify(client)) return -ENODEV; data = kzalloc(sizeof(struct qt1070_data), GFP_KERNEL); input = input_allocate_device(); if (!data || !input) { dev_err(&client->dev, "insufficient memory\n"); err = -ENOMEM; goto err_free_mem; } data->client = client; data->input = input; data->irq = client->irq; input->name = "AT42QT1070 QTouch Sensor"; input->dev.parent = &client->dev; input->id.bustype = BUS_I2C; /* Add the keycode */ input->keycode = data->keycodes; input->keycodesize = sizeof(data->keycodes[0]); input->keycodemax = ARRAY_SIZE(qt1070_key2code); __set_bit(EV_KEY, input->evbit); for (i = 0; i < ARRAY_SIZE(qt1070_key2code); i++) { data->keycodes[i] = qt1070_key2code[i]; __set_bit(qt1070_key2code[i], input->keybit); } /* Calibrate device */ qt1070_write(client, CALIBRATE_CMD, 1); msleep(QT1070_CAL_TIME); /* Soft reset */ qt1070_write(client, RESET, 1); msleep(QT1070_RESET_TIME); err = request_threaded_irq(client->irq, NULL, qt1070_interrupt, IRQF_TRIGGER_NONE | IRQF_ONESHOT, client->dev.driver->name, data); if (err) { dev_err(&client->dev, "fail to request irq\n"); goto err_free_mem; } /* Register the input device */ err = input_register_device(data->input); if (err) { dev_err(&client->dev, "Failed to register input device\n"); goto err_free_irq; } i2c_set_clientdata(client, data); /* Read to clear the chang line */ qt1070_read(client, DET_STATUS); return 0; err_free_irq: free_irq(client->irq, data); err_free_mem: input_free_device(input); kfree(data); return err; }

Contributors

PersonTokensPropCommitsCommitProp
bo shenbo shen43299.54%150.00%
lars-peter clausenlars-peter clausen20.46%150.00%
Total434100.00%2100.00%


static int qt1070_remove(struct i2c_client *client) { struct qt1070_data *data = i2c_get_clientdata(client); /* Release IRQ */ free_irq(client->irq, data); input_unregister_device(data->input); kfree(data); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
bo shenbo shen46100.00%1100.00%
Total46100.00%1100.00%

#ifdef CONFIG_PM_SLEEP
static int qt1070_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct qt1070_data *data = i2c_get_clientdata(client); if (device_may_wakeup(dev)) enable_irq_wake(data->irq); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
bo shenbo shen48100.00%1100.00%
Total48100.00%1100.00%


static int qt1070_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct qt1070_data *data = i2c_get_clientdata(client); if (device_may_wakeup(dev)) disable_irq_wake(data->irq); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
bo shenbo shen48100.00%1100.00%
Total48100.00%1100.00%

#endif static SIMPLE_DEV_PM_OPS(qt1070_pm_ops, qt1070_suspend, qt1070_resume); static const struct i2c_device_id qt1070_id[] = { { "qt1070", 0 }, { }, }; MODULE_DEVICE_TABLE(i2c, qt1070_id); static struct i2c_driver qt1070_driver = { .driver = { .name = "qt1070", .pm = &qt1070_pm_ops, }, .id_table = qt1070_id, .probe = qt1070_probe, .remove = qt1070_remove, }; module_i2c_driver(qt1070_driver); MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); MODULE_DESCRIPTION("Driver for AT42QT1070 QTouch sensor"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
bo shenbo shen112099.12%240.00%
axel linaxel lin80.71%240.00%
lars-peter clausenlars-peter clausen20.18%120.00%
Total1130100.00%5100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}