cregit-Linux how code gets into the kernel

Release 4.7 drivers/input/touchscreen/hampshire.c

/*
 * Hampshire serial touchscreen driver
 *
 * Copyright (c) 2010 Adam Bennett
 * Based on the dynapro driver (c) Tias Guns
 *
 */

/*
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published by
 * the Free Software Foundation.
 */

/*
 * 2010/04/08 Adam Bennett <abennett72@gmail.com>
 *   Copied dynapro.c and edited for Hampshire 4-byte protocol
 */

#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>


#define DRIVER_DESC	"Hampshire serial touchscreen driver"

MODULE_AUTHOR("Adam Bennett <abennett72@gmail.com>");

MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");

/*
 * Definitions & global arrays.
 */


#define HAMPSHIRE_FORMAT_TOUCH_BIT 0x40

#define HAMPSHIRE_FORMAT_LENGTH 4

#define HAMPSHIRE_RESPONSE_BEGIN_BYTE 0x80


#define HAMPSHIRE_MIN_XC 0

#define HAMPSHIRE_MAX_XC 0x1000

#define HAMPSHIRE_MIN_YC 0

#define HAMPSHIRE_MAX_YC 0x1000


#define HAMPSHIRE_GET_XC(data) (((data[3] & 0x0c) >> 2) | (data[1] << 2) | ((data[0] & 0x38) << 6))

#define HAMPSHIRE_GET_YC(data) ((data[3] & 0x03) | (data[2] << 2) | ((data[0] & 0x07) << 9))

#define HAMPSHIRE_GET_TOUCHED(data) (HAMPSHIRE_FORMAT_TOUCH_BIT & data[0])

/*
 * Per-touchscreen data.
 */


struct hampshire {
	
struct input_dev *dev;
	
struct serio *serio;
	
int idx;
	
unsigned char data[HAMPSHIRE_FORMAT_LENGTH];
	
char phys[32];
};


static void hampshire_process_data(struct hampshire *phampshire) { struct input_dev *dev = phampshire->dev; if (HAMPSHIRE_FORMAT_LENGTH == ++phampshire->idx) { input_report_abs(dev, ABS_X, HAMPSHIRE_GET_XC(phampshire->data)); input_report_abs(dev, ABS_Y, HAMPSHIRE_GET_YC(phampshire->data)); input_report_key(dev, BTN_TOUCH, HAMPSHIRE_GET_TOUCHED(phampshire->data)); input_sync(dev); phampshire->idx = 0; } }

Contributors

PersonTokensPropCommitsCommitProp
adam bennettadam bennett84100.00%1100.00%
Total84100.00%1100.00%


static irqreturn_t hampshire_interrupt(struct serio *serio, unsigned char data, unsigned int flags) { struct hampshire *phampshire = serio_get_drvdata(serio); phampshire->data[phampshire->idx] = data; if (HAMPSHIRE_RESPONSE_BEGIN_BYTE & phampshire->data[0]) hampshire_process_data(phampshire); else dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n", phampshire->data[0]); return IRQ_HANDLED; }

Contributors

PersonTokensPropCommitsCommitProp
adam bennettadam bennett77100.00%1100.00%
Total77100.00%1100.00%


static void hampshire_disconnect(struct serio *serio) { struct hampshire *phampshire = serio_get_drvdata(serio); input_get_device(phampshire->dev); input_unregister_device(phampshire->dev); serio_close(serio); serio_set_drvdata(serio, NULL); input_put_device(phampshire->dev); kfree(phampshire); }

Contributors

PersonTokensPropCommitsCommitProp
adam bennettadam bennett59100.00%1100.00%
Total59100.00%1100.00%

/* * hampshire_connect() is the routine that is called when someone adds a * new serio device that supports hampshire protocol and registers it as * an input device. This is usually accomplished using inputattach. */
static int hampshire_connect(struct serio *serio, struct serio_driver *drv) { struct hampshire *phampshire; struct input_dev *input_dev; int err; phampshire = kzalloc(sizeof(struct hampshire), GFP_KERNEL); input_dev = input_allocate_device(); if (!phampshire || !input_dev) { err = -ENOMEM; goto fail1; } phampshire->serio = serio; phampshire->dev = input_dev; snprintf(phampshire->phys, sizeof(phampshire->phys), "%s/input0", serio->phys); input_dev->name = "Hampshire Serial TouchScreen"; input_dev->phys = phampshire->phys; input_dev->id.bustype = BUS_RS232; input_dev->id.vendor = SERIO_HAMPSHIRE; input_dev->id.product = 0; input_dev->id.version = 0x0001; input_dev->dev.parent = &serio->dev; input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); input_set_abs_params(phampshire->dev, ABS_X, HAMPSHIRE_MIN_XC, HAMPSHIRE_MAX_XC, 0, 0); input_set_abs_params(phampshire->dev, ABS_Y, HAMPSHIRE_MIN_YC, HAMPSHIRE_MAX_YC, 0, 0); serio_set_drvdata(serio, phampshire); err = serio_open(serio, drv); if (err) goto fail2; err = input_register_device(phampshire->dev); if (err) goto fail3; return 0; fail3: serio_close(serio); fail2: serio_set_drvdata(serio, NULL); fail1: input_free_device(input_dev); kfree(phampshire); return err; }

Contributors

PersonTokensPropCommitsCommitProp
adam bennettadam bennett293100.00%1100.00%
Total293100.00%1100.00%

/* * The serio driver structure. */ static struct serio_device_id hampshire_serio_ids[] = { { .type = SERIO_RS232, .proto = SERIO_HAMPSHIRE, .id = SERIO_ANY, .extra = SERIO_ANY, }, { 0 } }; MODULE_DEVICE_TABLE(serio, hampshire_serio_ids); static struct serio_driver hampshire_drv = { .driver = { .name = "hampshire", }, .description = DRIVER_DESC, .id_table = hampshire_serio_ids, .interrupt = hampshire_interrupt, .connect = hampshire_connect, .disconnect = hampshire_disconnect, }; module_serio_driver(hampshire_drv);

Overall Contributors

PersonTokensPropCommitsCommitProp
adam bennettadam bennett72399.72%150.00%
axel linaxel lin20.28%150.00%
Total725100.00%2100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}