Release 4.7 drivers/isdn/hardware/eicon/mi_pc.h
/*
*
Copyright (c) Eicon Networks, 2002.
*
This source file is supplied for the use with
Eicon Networks range of DIVA Server Adapters.
*
Eicon File Revision : 2.1
*
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
*
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU General Public License for more details.
*
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
/*----------------------------------------------------------------------------
// MAESTRA ISA PnP */
#define BRI_MEMORY_BASE 0x1f700000
#define BRI_MEMORY_SIZE 0x00100000
/* 1MB on the BRI */
#define BRI_SHARED_RAM_SIZE 0x00010000
/* 64k shared RAM */
#define BRI_RAY_TAYLOR_DSP_CODE_SIZE 0x00020000
/* max 128k DSP-Code (Ray Taylor's code) */
#define BRI_ORG_MAX_DSP_CODE_SIZE 0x00050000
/* max 320k DSP-Code (Telindus) */
#define BRI_V90D_MAX_DSP_CODE_SIZE 0x00060000
/* max 384k DSP-Code if V.90D included */
#define BRI_CACHED_ADDR(x) (((x) & 0x1fffffffL) | 0x80000000L)
#define BRI_UNCACHED_ADDR(x) (((x) & 0x1fffffffL) | 0xa0000000L)
#define ADDR 4
#define ADDRH 6
#define DATA 0
#define RESET 7
#define DEFAULT_ADDRESS 0x240
#define DEFAULT_IRQ 3
#define M_PCI_ADDR 0x04
/* MAESTRA BRI PCI */
#define M_PCI_ADDRH 0x0c
/* MAESTRA BRI PCI */
#define M_PCI_DATA 0x00
/* MAESTRA BRI PCI */
#define M_PCI_RESET 0x10
/* MAESTRA BRI PCI */
/*----------------------------------------------------------------------------
// MAESTRA PRI PCI */
#define MP_IRQ_RESET 0xc18
/* offset of isr in the CONFIG memory bar */
#define MP_IRQ_RESET_VAL 0xfe
/* value to clear an interrupt */
#define MP_MEMORY_SIZE 0x00400000
/* 4MB on standard PRI */
#define MP2_MEMORY_SIZE 0x00800000
/* 8MB on PRI Rev. 2 */
#define MP_SHARED_RAM_OFFSET 0x00001000
/* offset of shared RAM base in the DRAM memory bar */
#define MP_SHARED_RAM_SIZE 0x00010000
/* 64k shared RAM */
#define MP_PROTOCOL_OFFSET (MP_SHARED_RAM_OFFSET + MP_SHARED_RAM_SIZE)
#define MP_RAY_TAYLOR_DSP_CODE_SIZE 0x00040000
/* max 256k DSP-Code (Ray Taylor's code) */
#define MP_ORG_MAX_DSP_CODE_SIZE 0x00060000
/* max 384k DSP-Code (Telindus) */
#define MP_V90D_MAX_DSP_CODE_SIZE 0x00070000
/* max 448k DSP-Code if V.90D included) */
#define MP_VOIP_MAX_DSP_CODE_SIZE 0x00090000
/* max 576k DSP-Code if voice over IP included */
#define MP_CACHED_ADDR(x) (((x) & 0x1fffffffL) | 0x80000000L)
#define MP_UNCACHED_ADDR(x) (((x) & 0x1fffffffL) | 0xa0000000L)
#define MP_RESET 0x20
/* offset of RESET register in the DEVICES memory bar */
/* RESET register bits */
#define _MP_S2M_RESET 0x10
/* active lo */
#define _MP_LED2 0x08
/* 1 = on */
#define _MP_LED1 0x04
/* 1 = on */
#define _MP_DSP_RESET 0x02
/* active lo */
#define _MP_RISC_RESET 0x81
/* active hi, bit 7 for compatibility with old boards */
/* CPU exception context structure in MP shared ram after trap */
typedef struct mp_xcptcontext_s MP_XCPTC;
struct mp_xcptcontext_s {
dword sr;
dword cr;
dword epc;
dword vaddr;
dword regs[32];
dword mdlo;
dword mdhi;
dword reseverd;
dword xclass;
};
/* boot interface structure for PRI */
struct mp_load {
dword volatile cmd;
dword volatile addr;
dword volatile len;
dword volatile err;
dword volatile live;
dword volatile res1[0x1b];
dword volatile TrapId; /* has value 0x999999XX on a CPU trap */
dword volatile res2[0x03];
MP_XCPTC volatile xcpt; /* contains register dump */
dword volatile rest[((0x1020 >> 2) - 6) - 0x1b - 1 - 0x03 - (sizeof(MP_XCPTC) >> 2)];
dword volatile signature;
dword data[60000]; /* real interface description */
};
/*----------------------------------------------------------------------------*/
/* SERVER 4BRI (Quattro PCI) */
#define MQ_BOARD_REG_OFFSET 0x800000
/* PC relative On board registers offset */
#define MQ_BREG_RISC 0x1200
/* RISC Reset ect */
#define MQ_RISC_COLD_RESET_MASK 0x0001
/* RISC Cold reset */
#define MQ_RISC_WARM_RESET_MASK 0x0002
/* RISC Warm reset */
#define MQ_BREG_IRQ_TEST 0x0608
/* Interrupt request, no CPU interaction */
#define MQ_IRQ_REQ_ON 0x1
#define MQ_IRQ_REQ_OFF 0x0
#define MQ_BOARD_DSP_OFFSET 0xa00000
/* PC relative On board DSP regs offset */
#define MQ_DSP1_ADDR_OFFSET 0x0008
/* Addr register offset DSP 1 subboard 1 */
#define MQ_DSP2_ADDR_OFFSET 0x0208
/* Addr register offset DSP 2 subboard 1 */
#define MQ_DSP1_DATA_OFFSET 0x0000
/* Data register offset DSP 1 subboard 1 */
#define MQ_DSP2_DATA_OFFSET 0x0200
/* Data register offset DSP 2 subboard 1 */
#define MQ_DSP_JUNK_OFFSET 0x0400
/* DSP Data/Addr regs subboard offset */
#define MQ_ISAC_DSP_RESET 0x0028
/* ISAC and DSP reset address offset */
#define MQ_BOARD_ISAC_DSP_RESET 0x800028
/* ISAC and DSP reset address offset */
#define MQ_INSTANCE_COUNT 4
/* 4BRI consists of four instances */
#define MQ_MEMORY_SIZE 0x00400000
/* 4MB on standard 4BRI */
#define MQ_CTRL_SIZE 0x00002000
/* 8K memory mapped registers */
#define MQ_SHARED_RAM_SIZE 0x00010000
/* 64k shared RAM */
#define MQ_ORG_MAX_DSP_CODE_SIZE 0x00050000
/* max 320k DSP-Code (Telindus) */
#define MQ_V90D_MAX_DSP_CODE_SIZE 0x00060000
/* max 384K DSP-Code if V.90D included */
#define MQ_VOIP_MAX_DSP_CODE_SIZE 0x00028000
/* max 4*160k = 640K DSP-Code if voice over IP included */
#define MQ_CACHED_ADDR(x) (((x) & 0x1fffffffL) | 0x80000000L)
#define MQ_UNCACHED_ADDR(x) (((x) & 0x1fffffffL) | 0xa0000000L)
/*--------------------------------------------------------------------------------------------*/
/* Additional definitions reflecting the different address map of the SERVER 4BRI V2 */
#define MQ2_BREG_RISC 0x0200
/* RISC Reset ect */
#define MQ2_BREG_IRQ_TEST 0x0400
/* Interrupt request, no CPU interaction */
#define MQ2_BOARD_DSP_OFFSET 0x800000
/* PC relative On board DSP regs offset */
#define MQ2_DSP1_DATA_OFFSET 0x1800
/* Data register offset DSP 1 subboard 1 */
#define MQ2_DSP1_ADDR_OFFSET 0x1808
/* Addr register offset DSP 1 subboard 1 */
#define MQ2_DSP2_DATA_OFFSET 0x1810
/* Data register offset DSP 2 subboard 1 */
#define MQ2_DSP2_ADDR_OFFSET 0x1818
/* Addr register offset DSP 2 subboard 1 */
#define MQ2_DSP_JUNK_OFFSET 0x1000
/* DSP Data/Addr regs subboard offset */
#define MQ2_ISAC_DSP_RESET 0x0000
/* ISAC and DSP reset address offset */
#define MQ2_BOARD_ISAC_DSP_RESET 0x800000
/* ISAC and DSP reset address offset */
#define MQ2_IPACX_CONFIG 0x0300
/* IPACX Configuration TE(0)/NT(1) */
#define MQ2_BOARD_IPACX_CONFIG 0x800300
/* "" */
#define MQ2_MEMORY_SIZE 0x01000000
/* 16MB code/data memory */
#define MQ2_CTRL_SIZE 0x00008000
/* 32K memory mapped registers */
/*----------------------------------------------------------------------------*/
/* SERVER BRI 2M/2F as derived from 4BRI V2 */
#define BRI2_MEMORY_SIZE 0x00800000
/* 8MB code/data memory */
#define BRI2_PROTOCOL_MEMORY_SIZE (MQ2_MEMORY_SIZE >> 2)
/* same as one 4BRI Rev.2 task */
#define BRI2_CTRL_SIZE 0x00008000
/* 32K memory mapped registers */
#define M_INSTANCE_COUNT 1
/* BRI consists of one instance */
/*
* Some useful constants for proper initialization of the GT6401x
*/
#define ID_REG 0x0000
/*Pci reg-contain the Dev&Ven ID of the card*/
#define RAS0_BASEREG 0x0010
/*Ras0 register - contain the base addr Ras0*/
#define RAS2_BASEREG 0x0014
#define CS_BASEREG 0x0018
#define BOOT_BASEREG 0x001c
#define GTREGS_BASEREG 0x0024
/*GTRegsBase reg-contain the base addr where*/
/*the GT64010 internal regs where mapped */
/*
* GT64010 internal registers
*/
/* DRAM device coding */
#define LOW_RAS0_DREG 0x0400
/*Ras0 low decode address*/
#define HI_RAS0_DREG 0x0404
/*Ras0 high decode address*/
#define LOW_RAS1_DREG 0x0408
/*Ras1 low decode address*/
#define HI_RAS1_DREG 0x040c
/*Ras1 high decode address*/
#define LOW_RAS2_DREG 0x0410
/*Ras2 low decode address*/
#define HI_RAS2_DREG 0x0414
/*Ras2 high decode address*/
#define LOW_RAS3_DREG 0x0418
/*Ras3 low decode address*/
#define HI_RAS3_DREG 0x041c
/*Ras3 high decode address*/
/* I/O CS device coding */
#define LOW_CS0_DREG 0x0420
/* CS0* low decode register */
#define HI_CS0_DREG 0x0424
/* CS0* high decode register */
#define LOW_CS1_DREG 0x0428
/* CS1* low decode register */
#define HI_CS1_DREG 0x042c
/* CS1* high decode register */
#define LOW_CS2_DREG 0x0430
/* CS2* low decode register */
#define HI_CS2_DREG 0x0434
/* CS2* high decode register */
#define LOW_CS3_DREG 0x0438
/* CS3* low decode register */
#define HI_CS3_DREG 0x043c
/* CS3* high decode register */
/* Boot PROM device coding */
#define LOW_BOOTCS_DREG 0x0440
/* Boot CS low decode register */
#define HI_BOOTCS_DREG 0x0444
/* Boot CS High decode register */
/* DRAM group coding (for CPU) */
#define LO_RAS10_GREG 0x0008
/*Ras1..0 group low decode address*/
#define HI_RAS10_GREG 0x0010
/*Ras1..0 group high decode address*/
#define LO_RAS32_GREG 0x0018
/*Ras3..2 group low decode address */
#define HI_RAS32_GREG 0x0020
/*Ras3..2 group high decode address */
/* I/O CS group coding for (CPU) */
#define LO_CS20_GREG 0x0028
/* CS2..0 group low decode register */
#define HI_CS20_GREG 0x0030
/* CS2..0 group high decode register */
#define LO_CS3B_GREG 0x0038
/* CS3 & PROM group low decode register */
#define HI_CS3B_GREG 0x0040
/* CS3 & PROM group high decode register */
/* Galileo specific PCI config. */
#define PCI_TIMEOUT_RET 0x0c04
/* Time Out and retry register */
#define RAS10_BANKSIZE 0x0c08
/* RAS 1..0 group PCI bank size */
#define RAS32_BANKSIZE 0x0c0c
/* RAS 3..2 group PCI bank size */
#define CS20_BANKSIZE 0x0c10
/* CS 2..0 group PCI bank size */
#define CS3B_BANKSIZE 0x0c14
/* CS 3 & Boot group PCI bank size */
#define DRAM_SIZE 0x0001
/*Dram size in mega bytes*/
#define PROM_SIZE 0x08000
/*Prom size in bytes*/
/*--------------------------------------------------------------------------*/
#define OFFS_DIVA_INIT_TASK_COUNT 0x68
#define OFFS_DSP_CODE_BASE_ADDR 0x6c
#define OFFS_XLOG_BUF_ADDR 0x70
#define OFFS_XLOG_COUNT_ADDR 0x74
#define OFFS_XLOG_OUT_ADDR 0x78
#define OFFS_PROTOCOL_END_ADDR 0x7c
#define OFFS_PROTOCOL_ID_STRING 0x80
/*--------------------------------------------------------------------------*/
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| armin schindler | armin schindler | 767 | 99.61% | 1 | 25.00% |
| alan cox | alan cox | 1 | 0.13% | 1 | 25.00% |
| steven cole | steven cole | 1 | 0.13% | 1 | 25.00% |
| joe perches | joe perches | 1 | 0.13% | 1 | 25.00% |
| Total | 770 | 100.00% | 4 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.