Release 4.7 drivers/isdn/hardware/eicon/pc_init.h

Directory: drivers/isdn/hardware/eicon
/*
 *
 Copyright (c) Eicon Networks, 2002.
 *
 This source file is supplied for the use with
 Eicon Networks range of DIVA Server Adapters.
 *
 Eicon File Revision :    2.1
 *
 This program is free software; you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation; either version 2, or (at your option)
 any later version.
 *
 This program is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING ANY
 implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 See the GNU General Public License for more details.
 *
 You should have received a copy of the GNU General Public License
 along with this program; if not, write to the Free Software
 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 */
#ifndef PC_INIT_H_

#define PC_INIT_H_
/*------------------------------------------------------------------*/
/*
  Initialisation parameters for the card
  0x0008 <byte> TEI
  0x0009 <byte> NT2 flag
  0x000a <byte> Default DID length
  0x000b <byte> Disable watchdog flag
  0x000c <byte> Permanent connection flag
  0x000d <byte> Bit 3-8: L1 Hunt Group/Tristate
  0x000d <byte> Bit 1: QSig small CR length if set to 1
  0x000d <byte> Bit 2: QSig small CHI length if set to 1
  0x000e <byte> Bit 1-3: Stable L2, 0=OnDemand,1=NoDisc,2=permanent
  0x000e <byte> Bit 4: NT mode
  0x000e <byte> Bit 5: QSig Channel ID format
  0x000e <byte> Bit 6: QSig Call Forwarding Allowed Flag
  0x000e <byte> Bit 7: Disable AutoSPID Flag
  0x000f <byte> No order check flag
  0x0010 <byte> Force companding type:0=default,1=a-law,2=u-law
  0x0012 <byte> Low channel flag
  0x0013 <byte> Protocol version
  0x0014 <byte> CRC4 option:0=default,1=double_frm,2=multi_frm,3=auto
  0x0015 <byte> Bit 0: NoHscx30, Bit 1: Loopback flag, Bit 2: ForceHscx30
  0x0016 <byte> DSP info
  0x0017-0x0019 Serial number
  0x001a <byte> Card type
  0x0020 <string> OAD 0
  0x0040 <string> OSA 0
  0x0060 <string> SPID 0 (if not T.1)
  0x0060 <struct> if T.1: Robbed Bit Configuration
  0x0060          length (8)
  0x0061          RBS Answer Delay
  0x0062          RBS Config Bit 3, 4:
  0  0 -> Wink Start
  1  0 -> Loop Start
  0  1 -> Ground Start
  1  1 -> reserved
  Bit 5, 6:
  0  0 -> Pulse Dial -> Rotary
  1  0 -> DTMF
  0  1 -> MF
  1  1 -> reserved
  0x0063          RBS RX Digit Timeout
  0x0064          RBS Bearer Capability
  0x0065-0x0069   RBS Debug Mask
  0x0080 <string> OAD 1
  0x00a0 <string> OSA 1
  0x00c0 <string> SPID 1
  0x00e0 <w-element list> Additional configuration
*/

#define PCINIT_END_OF_LIST                0x00

#define PCINIT_MODEM_GUARD_TONE           0x01

#define PCINIT_MODEM_MIN_SPEED            0x02

#define PCINIT_MODEM_MAX_SPEED            0x03

#define PCINIT_MODEM_PROTOCOL_OPTIONS     0x04

#define PCINIT_FAX_OPTIONS                0x05

#define PCINIT_FAX_MAX_SPEED              0x06

#define PCINIT_MODEM_OPTIONS              0x07

#define PCINIT_MODEM_NEGOTIATION_MODE     0x08

#define PCINIT_MODEM_MODULATIONS_MASK     0x09

#define PCINIT_MODEM_TRANSMIT_LEVEL       0x0a

#define PCINIT_FAX_DISABLED_RESOLUTIONS   0x0b

#define PCINIT_FAX_MAX_RECORDING_WIDTH    0x0c

#define PCINIT_FAX_MAX_RECORDING_LENGTH   0x0d

#define PCINIT_FAX_MIN_SCANLINE_TIME      0x0e

#define PCINIT_US_EKTS_CACH_HANDLES       0x0f

#define PCINIT_US_EKTS_BEGIN_CONF         0x10

#define PCINIT_US_EKTS_DROP_CONF          0x11

#define PCINIT_US_EKTS_CALL_TRANSFER      0x12

#define PCINIT_RINGERTONE_OPTION          0x13

#define PCINIT_CARD_ADDRESS               0x14

#define PCINIT_FPGA_FEATURES              0x15

#define PCINIT_US_EKTS_MWI                0x16

#define PCINIT_MODEM_SPEAKER_CONTROL      0x17

#define PCINIT_MODEM_SPEAKER_VOLUME       0x18

#define PCINIT_MODEM_CARRIER_WAIT_TIME    0x19

#define PCINIT_MODEM_CARRIER_LOSS_TIME    0x1a

#define PCINIT_UNCHAN_B_MASK              0x1b

#define PCINIT_PART68_LIMITER             0x1c

#define PCINIT_XDI_FEATURES               0x1d

#define PCINIT_QSIG_DIALECT               0x1e

#define PCINIT_DISABLE_AUTOSPID_FLAG      0x1f

#define PCINIT_FORCE_VOICE_MAIL_ALERT     0x20

#define PCINIT_PIAFS_TURNAROUND_FRAMES    0x21

#define PCINIT_L2_COUNT                   0x22

#define PCINIT_QSIG_FEATURES              0x23

#define PCINIT_NO_SIGNALLING              0x24

#define PCINIT_CARD_SN                    0x25

#define PCINIT_CARD_PORT                  0x26

#define PCINIT_ALERTTO                    0x27

#define PCINIT_MODEM_EYE_SETUP            0x28

#define PCINIT_FAX_V34_OPTIONS            0x29
/*------------------------------------------------------------------*/

#define PCINIT_MODEM_GUARD_TONE_NONE            0x00

#define PCINIT_MODEM_GUARD_TONE_550HZ           0x01

#define PCINIT_MODEM_GUARD_TONE_1800HZ          0x02

#define PCINIT_MODEM_GUARD_TONE_CHOICES         0x03

#define PCINIT_MODEMPROT_DISABLE_V42_V42BIS     0x0001

#define PCINIT_MODEMPROT_DISABLE_MNP_MNP5       0x0002

#define PCINIT_MODEMPROT_REQUIRE_PROTOCOL       0x0004

#define PCINIT_MODEMPROT_DISABLE_V42_DETECT     0x0008

#define PCINIT_MODEMPROT_DISABLE_COMPRESSION    0x0010

#define PCINIT_MODEMPROT_REQUIRE_PROTOCOL_V34UP 0x0020

#define PCINIT_MODEMPROT_NO_PROTOCOL_IF_1200    0x0100

#define PCINIT_MODEMPROT_BUFFER_IN_V42_DETECT   0x0200

#define PCINIT_MODEMPROT_DISABLE_V42_SREJ       0x0400

#define PCINIT_MODEMPROT_DISABLE_MNP3           0x0800

#define PCINIT_MODEMPROT_DISABLE_MNP4           0x1000

#define PCINIT_MODEMPROT_DISABLE_MNP10          0x2000

#define PCINIT_MODEMPROT_NO_PROTOCOL_IF_V22BIS  0x4000

#define PCINIT_MODEMPROT_NO_PROTOCOL_IF_V32BIS  0x8000

#define PCINIT_MODEMCONFIG_LEASED_LINE_MODE     0x00000001L

#define PCINIT_MODEMCONFIG_4_WIRE_OPERATION     0x00000002L

#define PCINIT_MODEMCONFIG_DISABLE_BUSY_DETECT  0x00000004L

#define PCINIT_MODEMCONFIG_DISABLE_CALLING_TONE 0x00000008L

#define PCINIT_MODEMCONFIG_DISABLE_ANSWER_TONE  0x00000010L

#define PCINIT_MODEMCONFIG_ENABLE_DIAL_TONE_DET 0x00000020L

#define PCINIT_MODEMCONFIG_USE_POTS_INTERFACE   0x00000040L

#define PCINIT_MODEMCONFIG_FORCE_RAY_TAYLOR_FAX 0x00000080L

#define PCINIT_MODEMCONFIG_DISABLE_RETRAIN      0x00000100L

#define PCINIT_MODEMCONFIG_DISABLE_STEPDOWN     0x00000200L

#define PCINIT_MODEMCONFIG_DISABLE_SPLIT_SPEED  0x00000400L

#define PCINIT_MODEMCONFIG_DISABLE_TRELLIS      0x00000800L

#define PCINIT_MODEMCONFIG_ALLOW_RDL_TEST_LOOP  0x00001000L

#define PCINIT_MODEMCONFIG_DISABLE_STEPUP       0x00002000L

#define PCINIT_MODEMCONFIG_DISABLE_FLUSH_TIMER  0x00004000L

#define PCINIT_MODEMCONFIG_REVERSE_DIRECTION    0x00008000L

#define PCINIT_MODEMCONFIG_DISABLE_TX_REDUCTION 0x00010000L

#define PCINIT_MODEMCONFIG_DISABLE_PRECODING    0x00020000L

#define PCINIT_MODEMCONFIG_DISABLE_PREEMPHASIS  0x00040000L

#define PCINIT_MODEMCONFIG_DISABLE_SHAPING      0x00080000L

#define PCINIT_MODEMCONFIG_DISABLE_NONLINEAR_EN 0x00100000L

#define PCINIT_MODEMCONFIG_DISABLE_MANUALREDUCT 0x00200000L

#define PCINIT_MODEMCONFIG_DISABLE_16_POINT_TRN 0x00400000L

#define PCINIT_MODEMCONFIG_DISABLE_2400_SYMBOLS 0x01000000L

#define PCINIT_MODEMCONFIG_DISABLE_2743_SYMBOLS 0x02000000L

#define PCINIT_MODEMCONFIG_DISABLE_2800_SYMBOLS 0x04000000L

#define PCINIT_MODEMCONFIG_DISABLE_3000_SYMBOLS 0x08000000L

#define PCINIT_MODEMCONFIG_DISABLE_3200_SYMBOLS 0x10000000L

#define PCINIT_MODEMCONFIG_DISABLE_3429_SYMBOLS 0x20000000L

#define PCINIT_MODEM_NEGOTIATE_HIGHEST          0x00

#define PCINIT_MODEM_NEGOTIATE_DISABLED         0x01

#define PCINIT_MODEM_NEGOTIATE_IN_CLASS         0x02

#define PCINIT_MODEM_NEGOTIATE_V100             0x03

#define PCINIT_MODEM_NEGOTIATE_V8               0x04

#define PCINIT_MODEM_NEGOTIATE_V8BIS            0x05

#define PCINIT_MODEM_NEGOTIATE_CHOICES          0x06

#define PCINIT_MODEMMODULATION_DISABLE_V21      0x00000001L

#define PCINIT_MODEMMODULATION_DISABLE_V23      0x00000002L

#define PCINIT_MODEMMODULATION_DISABLE_V22      0x00000004L

#define PCINIT_MODEMMODULATION_DISABLE_V22BIS   0x00000008L

#define PCINIT_MODEMMODULATION_DISABLE_V32      0x00000010L

#define PCINIT_MODEMMODULATION_DISABLE_V32BIS   0x00000020L

#define PCINIT_MODEMMODULATION_DISABLE_V34      0x00000040L

#define PCINIT_MODEMMODULATION_DISABLE_V90      0x00000080L

#define PCINIT_MODEMMODULATION_DISABLE_BELL103  0x00000100L

#define PCINIT_MODEMMODULATION_DISABLE_BELL212A 0x00000200L

#define PCINIT_MODEMMODULATION_DISABLE_VFC      0x00000400L

#define PCINIT_MODEMMODULATION_DISABLE_K56FLEX  0x00000800L

#define PCINIT_MODEMMODULATION_DISABLE_X2       0x00001000L

#define PCINIT_MODEMMODULATION_ENABLE_V29FDX    0x00010000L

#define PCINIT_MODEMMODULATION_ENABLE_V33       0x00020000L

#define PCINIT_MODEMMODULATION_ENABLE_V90A      0x00040000L

#define PCINIT_MODEM_TRANSMIT_LEVEL_CHOICES     0x10

#define PCINIT_MODEM_SPEAKER_OFF                0x00

#define PCINIT_MODEM_SPEAKER_DURING_TRAIN       0x01

#define PCINIT_MODEM_SPEAKER_TIL_CONNECT        0x02

#define PCINIT_MODEM_SPEAKER_ALWAYS_ON          0x03

#define PCINIT_MODEM_SPEAKER_CHOICES            0x04

#define PCINIT_MODEM_SPEAKER_VOLUME_MIN         0x00

#define PCINIT_MODEM_SPEAKER_VOLUME_LOW         0x01

#define PCINIT_MODEM_SPEAKER_VOLUME_HIGH        0x02

#define PCINIT_MODEM_SPEAKER_VOLUME_MAX         0x03

#define PCINIT_MODEM_SPEAKER_VOLUME_CHOICES     0x04
/*------------------------------------------------------------------*/

#define PCINIT_FAXCONFIG_DISABLE_FINE           0x0001

#define PCINIT_FAXCONFIG_DISABLE_ECM            0x0002

#define PCINIT_FAXCONFIG_ECM_64_BYTES           0x0004

#define PCINIT_FAXCONFIG_DISABLE_2D_CODING      0x0008

#define PCINIT_FAXCONFIG_DISABLE_T6_CODING      0x0010

#define PCINIT_FAXCONFIG_DISABLE_UNCOMPR        0x0020

#define PCINIT_FAXCONFIG_REFUSE_POLLING         0x0040

#define PCINIT_FAXCONFIG_HIDE_TOTAL_PAGES       0x0080

#define PCINIT_FAXCONFIG_HIDE_ALL_HEADLINE      0x0100

#define PCINIT_FAXCONFIG_HIDE_PAGE_INFO         0x0180

#define PCINIT_FAXCONFIG_HEADLINE_OPTIONS_MASK  0x0180

#define PCINIT_FAXCONFIG_DISABLE_FEATURE_FALLBACK 0x0200

#define PCINIT_FAXCONFIG_V34FAX_CONTROL_RATE_1200 0x0800

#define PCINIT_FAXCONFIG_DISABLE_V34FAX         0x1000

#define PCINIT_FAXCONFIG_DISABLE_R8_0770_OR_200 0x01

#define PCINIT_FAXCONFIG_DISABLE_R8_1540        0x02

#define PCINIT_FAXCONFIG_DISABLE_R16_1540_OR_400 0x04

#define PCINIT_FAXCONFIG_DISABLE_R4_0385_OR_100 0x08

#define PCINIT_FAXCONFIG_DISABLE_300_300        0x10

#define PCINIT_FAXCONFIG_DISABLE_INCH_BASED     0x40

#define PCINIT_FAXCONFIG_DISABLE_METRIC_BASED   0x80

#define PCINIT_FAXCONFIG_REC_WIDTH_ISO_A3       0

#define PCINIT_FAXCONFIG_REC_WIDTH_ISO_B4       1

#define PCINIT_FAXCONFIG_REC_WIDTH_ISO_A4       2

#define PCINIT_FAXCONFIG_REC_WIDTH_COUNT        3

#define PCINIT_FAXCONFIG_REC_LENGTH_UNLIMITED   0

#define PCINIT_FAXCONFIG_REC_LENGTH_ISO_B4      1

#define PCINIT_FAXCONFIG_REC_LENGTH_ISO_A4      2

#define PCINIT_FAXCONFIG_REC_LENGTH_COUNT       3

#define PCINIT_FAXCONFIG_SCANLINE_TIME_00_00_00 0

#define PCINIT_FAXCONFIG_SCANLINE_TIME_05_05_05 1

#define PCINIT_FAXCONFIG_SCANLINE_TIME_10_05_05 2

#define PCINIT_FAXCONFIG_SCANLINE_TIME_10_10_10 3

#define PCINIT_FAXCONFIG_SCANLINE_TIME_20_10_10 4

#define PCINIT_FAXCONFIG_SCANLINE_TIME_20_20_20 5

#define PCINIT_FAXCONFIG_SCANLINE_TIME_40_20_20 6

#define PCINIT_FAXCONFIG_SCANLINE_TIME_40_40_40 7

#define PCINIT_FAXCONFIG_SCANLINE_TIME_RES_8    8

#define PCINIT_FAXCONFIG_SCANLINE_TIME_RES_9    9

#define PCINIT_FAXCONFIG_SCANLINE_TIME_RES_10   10

#define PCINIT_FAXCONFIG_SCANLINE_TIME_10_10_05 11

#define PCINIT_FAXCONFIG_SCANLINE_TIME_20_10_05 12

#define PCINIT_FAXCONFIG_SCANLINE_TIME_20_20_10 13

#define PCINIT_FAXCONFIG_SCANLINE_TIME_40_20_10 14

#define PCINIT_FAXCONFIG_SCANLINE_TIME_40_40_20 15

#define PCINIT_FAXCONFIG_SCANLINE_TIME_COUNT    16

#define PCINIT_FAXCONFIG_DISABLE_TX_REDUCTION   0x00010000L

#define PCINIT_FAXCONFIG_DISABLE_PRECODING      0x00020000L

#define PCINIT_FAXCONFIG_DISABLE_PREEMPHASIS    0x00040000L

#define PCINIT_FAXCONFIG_DISABLE_SHAPING        0x00080000L

#define PCINIT_FAXCONFIG_DISABLE_NONLINEAR_EN   0x00100000L

#define PCINIT_FAXCONFIG_DISABLE_MANUALREDUCT   0x00200000L

#define PCINIT_FAXCONFIG_DISABLE_16_POINT_TRN   0x00400000L

#define PCINIT_FAXCONFIG_DISABLE_2400_SYMBOLS   0x01000000L

#define PCINIT_FAXCONFIG_DISABLE_2743_SYMBOLS   0x02000000L

#define PCINIT_FAXCONFIG_DISABLE_2800_SYMBOLS   0x04000000L

#define PCINIT_FAXCONFIG_DISABLE_3000_SYMBOLS   0x08000000L

#define PCINIT_FAXCONFIG_DISABLE_3200_SYMBOLS   0x10000000L

#define PCINIT_FAXCONFIG_DISABLE_3429_SYMBOLS   0x20000000L
/*--------------------------------------------------------------------------*/

#define PCINIT_XDI_CMA_FOR_ALL_NL_PRIMITIVES    0x01
/*--------------------------------------------------------------------------*/

#define PCINIT_FPGA_PLX_ACCESS_SUPPORTED        0x01
/*--------------------------------------------------------------------------*/
#endif
/*--------------------------------------------------------------------------*/
Overall Contributors
Person Tokens Prop Commits CommitProp
armin schindler armin schindler 751 99.73% 1 50.00%
joe perches joe perches 2 0.27% 1 50.00%
Total 753 100.00% 2 100.00%
  Directory: drivers/isdn/hardware/eicon

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
	Person	Tokens	Prop	Commits	CommitProp
armin schindler	armin schindler	751	99.73%	1	50.00%
joe perches	joe perches	2	0.27%	1	50.00%
	Total	753	100.00%	2	100.00%
cregit-Linux how code gets into the kernel

Release 4.7 drivers/isdn/hardware/eicon/pc_init.h

Overall Contributors
