/* $Id: xdi_msg.h,v 1.1.2.2 2001/02/16 08:40:36 armin Exp $ */ #ifndef __DIVA_XDI_UM_CFG_MESSAGE_H__ #define __DIVA_XDI_UM_CFG_MESSAGE_H__ /* Definition of messages used to communicate between XDI device driver and user mode configuration utility */ /* As acknowledge one DWORD - card ordinal will be read from the card */ #define DIVA_XDI_UM_CMD_GET_CARD_ORDINAL 0 /* no acknowledge will be generated, memory block will be written in the memory at given offset */ #define DIVA_XDI_UM_CMD_WRITE_SDRAM_BLOCK 1 /* no acknowledge will be genatated, FPGA will be programmed */ #define DIVA_XDI_UM_CMD_WRITE_FPGA 2 /* As acknowledge block of SDRAM will be read in the user buffer */ #define DIVA_XDI_UM_CMD_READ_SDRAM 3 /* As acknowledge dword with serial number will be read in the user buffer */ #define DIVA_XDI_UM_CMD_GET_SERIAL_NR 4 /* As acknowledge struct consisting from 9 dwords with PCI info. dword[0...7] = 8 PCI BARS dword[9] = IRQ */ #define DIVA_XDI_UM_CMD_GET_PCI_HW_CONFIG 5 /* Reset of the board + activation of primary boot loader */ #define DIVA_XDI_UM_CMD_RESET_ADAPTER 6 /* Called after code download to start adapter at specified address Start does set new set of features due to fact that we not know if protocol features have changed */ #define DIVA_XDI_UM_CMD_START_ADAPTER 7 /* Stop adapter, called if user wishes to stop adapter without unload of the driver, to reload adapter with different protocol */ #define DIVA_XDI_UM_CMD_STOP_ADAPTER 8 /* Get state of current adapter Acknowledge is one dword with following values: 0 - adapter ready for download 1 - adapter running 2 - adapter dead 3 - out of service, driver should be restarted or hardware problem */ #define DIVA_XDI_UM_CMD_GET_CARD_STATE 9 /* Reads XLOG entry from the card */ #define DIVA_XDI_UM_CMD_READ_XLOG_ENTRY 10 /* Set untranslated protocol code features */ #define DIVA_XDI_UM_CMD_SET_PROTOCOL_FEATURES 11 typedef struct _diva_xdi_um_cfg_cmd_data_set_features { dword features; } diva_xdi_um_cfg_cmd_data_set_features_t; typedef struct _diva_xdi_um_cfg_cmd_data_start { dword offset; dword features; } diva_xdi_um_cfg_cmd_data_start_t; typedef struct _diva_xdi_um_cfg_cmd_data_write_sdram { dword ram_number; dword offset; dword length; } diva_xdi_um_cfg_cmd_data_write_sdram_t; typedef struct _diva_xdi_um_cfg_cmd_data_write_fpga { dword fpga_number; dword image_length; } diva_xdi_um_cfg_cmd_data_write_fpga_t; typedef struct _diva_xdi_um_cfg_cmd_data_read_sdram { dword ram_number; dword offset; dword length; } diva_xdi_um_cfg_cmd_data_read_sdram_t; typedef union _diva_xdi_um_cfg_cmd_data { diva_xdi_um_cfg_cmd_data_write_sdram_t write_sdram; diva_xdi_um_cfg_cmd_data_write_fpga_t write_fpga; diva_xdi_um_cfg_cmd_data_read_sdram_t read_sdram; diva_xdi_um_cfg_cmd_data_start_t start; diva_xdi_um_cfg_cmd_data_set_features_t features; } diva_xdi_um_cfg_cmd_data_t; typedef struct _diva_xdi_um_cfg_cmd { dword adapter; /* Adapter number 1...N */ dword command; diva_xdi_um_cfg_cmd_data_t command_data; dword data_length; /* Plain binary data will follow */ } diva_xdi_um_cfg_cmd_t; #endifOverall Contributors
| Person | Tokens | Prop | Commits | CommitProp | |
| armin schindler | armin schindler | 178 | 98.34% | 1 | 25.00% |
| rasmus villemoes | rasmus villemoes | 1 | 0.55% | 1 | 25.00% |
| joe perches | joe perches | 1 | 0.55% | 1 | 25.00% |
| kai germaschewski | kai germaschewski | 1 | 0.55% | 1 | 25.00% |
| Total | 181 | 100.00% | 4 | 100.00% |