cregit-Linux how code gets into the kernel

Release 4.7 drivers/isdn/hisax/st5481_b.c

/*
 * Driver for ST5481 USB ISDN modem
 *
 * Author       Frode Isaksen
 * Copyright    2001 by Frode Isaksen      <fisaksen@bewan.com>
 *              2001 by Kai Germaschewski  <kai.germaschewski@gmx.de>
 *
 * This software may be used and distributed according to the terms
 * of the GNU General Public License, incorporated herein by reference.
 *
 */

#include <linux/init.h>
#include <linux/gfp.h>
#include <linux/usb.h>
#include <linux/netdevice.h>
#include <linux/bitrev.h>
#include "st5481.h"


static inline void B_L1L2(struct st5481_bcs *bcs, int pr, void *arg) { struct hisax_if *ifc = (struct hisax_if *) &bcs->b_if; ifc->l1l2(ifc, pr, arg); }

Contributors

PersonTokensPropCommitsCommitProp
linus torvaldslinus torvalds45100.00%1100.00%
Total45100.00%1100.00%

/* * Encode and transmit next frame. */
static void usb_b_out(struct st5481_bcs *bcs, int buf_nr) { struct st5481_b_out *b_out = &bcs->b_out; struct st5481_adapter *adapter = bcs->adapter; struct urb *urb; unsigned int packet_size, offset; int len, buf_size, bytes_sent; int i; struct sk_buff *skb; if (test_and_set_bit(buf_nr, &b_out->busy)) { DBG(4, "ep %d urb %d busy", (bcs->channel + 1) * 2, buf_nr); return; } urb = b_out->urb[buf_nr]; // Adjust isoc buffer size according to flow state if (b_out->flow_event & (OUT_DOWN | OUT_UNDERRUN)) { buf_size = NUM_ISO_PACKETS_B * SIZE_ISO_PACKETS_B_OUT + B_FLOW_ADJUST; packet_size = SIZE_ISO_PACKETS_B_OUT + B_FLOW_ADJUST; DBG(4, "B%d,adjust flow,add %d bytes", bcs->channel + 1, B_FLOW_ADJUST); } else if (b_out->flow_event & OUT_UP) { buf_size = NUM_ISO_PACKETS_B * SIZE_ISO_PACKETS_B_OUT - B_FLOW_ADJUST; packet_size = SIZE_ISO_PACKETS_B_OUT - B_FLOW_ADJUST; DBG(4, "B%d,adjust flow,remove %d bytes", bcs->channel + 1, B_FLOW_ADJUST); } else { buf_size = NUM_ISO_PACKETS_B * SIZE_ISO_PACKETS_B_OUT; packet_size = 8; } b_out->flow_event = 0; len = 0; while (len < buf_size) { if ((skb = b_out->tx_skb)) { DBG_SKB(0x100, skb); DBG(4, "B%d,len=%d", bcs->channel + 1, skb->len); if (bcs->mode == L1_MODE_TRANS) { bytes_sent = buf_size - len; if (skb->len < bytes_sent) bytes_sent = skb->len; { /* swap tx bytes to get hearable audio data */ register unsigned char *src = skb->data; register unsigned char *dest = urb->transfer_buffer + len; register unsigned int count; for (count = 0; count < bytes_sent; count++) *dest++ = bitrev8(*src++); } len += bytes_sent; } else { len += isdnhdlc_encode(&b_out->hdlc_state, skb->data, skb->len, &bytes_sent, urb->transfer_buffer + len, buf_size-len); } skb_pull(skb, bytes_sent); if (!skb->len) { // Frame sent b_out->tx_skb = NULL; B_L1L2(bcs, PH_DATA | CONFIRM, (void *)(unsigned long) skb->truesize); dev_kfree_skb_any(skb); /* if (!(bcs->tx_skb = skb_dequeue(&bcs->sq))) { */ /* st5481B_sched_event(bcs, B_XMTBUFREADY); */ /* } */ } } else { if (bcs->mode == L1_MODE_TRANS) { memset(urb->transfer_buffer + len, 0xff, buf_size-len); len = buf_size; } else { // Send flags len += isdnhdlc_encode(&b_out->hdlc_state, NULL, 0, &bytes_sent, urb->transfer_buffer + len, buf_size-len); } } } // Prepare the URB for (i = 0, offset = 0; offset < len; i++) { urb->iso_frame_desc[i].offset = offset; urb->iso_frame_desc[i].length = packet_size; offset += packet_size; packet_size = SIZE_ISO_PACKETS_B_OUT; } urb->transfer_buffer_length = len; urb->number_of_packets = i; urb->dev = adapter->usb_dev; DBG_ISO_PACKET(0x200, urb); SUBMIT_URB(urb, GFP_NOIO); }

Contributors

PersonTokensPropCommitsCommitProp
linus torvaldslinus torvalds49886.76%112.50%
andrew mortonandrew morton6310.98%112.50%
alan coxalan cox40.70%112.50%
joe perchesjoe perches30.52%112.50%
akinobu mitaakinobu mita30.52%112.50%
oliver neukumoliver neukum10.17%112.50%
karsten keilkarsten keil10.17%112.50%
greg kroah-hartmangreg kroah-hartman10.17%112.50%
Total574100.00%8100.00%

/* * Start transferring (flags or data) on the B channel, since * FIFO counters has been set to a non-zero value. */
static void st5481B_start_xfer(void *context) { struct st5481_bcs *bcs = context; DBG(4, "B%d", bcs->channel + 1); // Start transmitting (flags or data) on B channel usb_b_out(bcs, 0); usb_b_out(bcs, 1); }

Contributors

PersonTokensPropCommitsCommitProp
linus torvaldslinus torvalds45100.00%1100.00%
Total45100.00%1100.00%

/* * If the adapter has only 2 LEDs, the green * LED will blink with a rate depending * on the number of channels opened. */
static void led_blink(struct st5481_adapter *adapter) { u_char leds = adapter->leds; // 50 frames/sec for each channel if (++adapter->led_counter % 50) { return; } if (adapter->led_counter % 100) { leds |= GREEN_LED; } else { leds &= ~GREEN_LED; } st5481_usb_device_ctrl_msg(adapter, GPIO_OUT, leds, NULL, NULL); }

Contributors

PersonTokensPropCommitsCommitProp
linus torvaldslinus torvalds6598.48%150.00%
andrew mortonandrew morton11.52%150.00%
Total66100.00%2100.00%


static void usb_b_out_complete(struct urb *urb) { struct st5481_bcs *bcs = urb->context; struct st5481_b_out *b_out = &bcs->b_out; struct st5481_adapter *adapter = bcs->adapter; int buf_nr; buf_nr = get_buf_nr(b_out->urb, urb); test_and_clear_bit(buf_nr, &b_out->busy); if (unlikely(urb->status < 0)) { switch (urb->status) { case -ENOENT: case -ESHUTDOWN: case -ECONNRESET: DBG(4, "urb killed status %d", urb->status); return; // Give up default: WARNING("urb status %d", urb->status); if (b_out->busy == 0) { st5481_usb_pipe_reset(adapter, (bcs->channel + 1) * 2 | USB_DIR_OUT, NULL, NULL); } break; } } usb_b_out(bcs, buf_nr); if (adapter->number_of_leds == 2) led_blink(adapter); }

Contributors

PersonTokensPropCommitsCommitProp
linus torvaldslinus torvalds13981.29%240.00%
karsten keilkarsten keil2514.62%120.00%
oliver neukumoliver neukum63.51%120.00%
arjan van de venarjan van de ven10.58%120.00%
Total171100.00%5100.00%

/* * Start or stop the transfer on the B channel. */
static void st5481B_mode(struct st5481_bcs *bcs, int mode) { struct st5481_b_out *b_out = &bcs->b_out; struct st5481_adapter *adapter = bcs->adapter; DBG(4, "B%d,mode=%d", bcs->channel + 1, mode); if (bcs->mode == mode) return; bcs->mode = mode; // Cancel all USB transfers on this B channel usb_unlink_urb(b_out->urb[0]); usb_unlink_urb(b_out->urb[1]); b_out->busy = 0; st5481_in_mode(&bcs->b_in, mode); if (bcs->mode != L1_MODE_NULL) { // Open the B channel if (bcs->mode != L1_MODE_TRANS) { u32 features = HDLC_BITREVERSE; if (bcs->mode == L1_MODE_HDLC_56K) features |= HDLC_56KBIT; isdnhdlc_out_init(&b_out->hdlc_state, features); } st5481_usb_pipe_reset(adapter, (bcs->channel + 1) * 2, NULL, NULL); // Enable B channel interrupts st5481_usb_device_ctrl_msg(adapter, FFMSK_B1 + (bcs->channel * 2), OUT_UP + OUT_DOWN + OUT_UNDERRUN, NULL, NULL); // Enable B channel FIFOs st5481_usb_device_ctrl_msg(adapter, OUT_B1_COUNTER+(bcs->channel * 2), 32, st5481B_start_xfer, bcs); if (adapter->number_of_leds == 4) { if (bcs->channel == 0) { adapter->leds |= B1_LED; } else { adapter->leds |= B2_LED; } } } else { // Disble B channel interrupts st5481_usb_device_ctrl_msg(adapter, FFMSK_B1+(bcs->channel * 2), 0, NULL, NULL); // Disable B channel FIFOs st5481_usb_device_ctrl_msg(adapter, OUT_B1_COUNTER+(bcs->channel * 2), 0, NULL, NULL); if (adapter->number_of_leds == 4) { if (bcs->channel == 0) { adapter->leds &= ~B1_LED; } else { adapter->leds &= ~B2_LED; } } else { st5481_usb_device_ctrl_msg(adapter, GPIO_OUT, adapter->leds, NULL, NULL); } if (b_out->tx_skb) { dev_kfree_skb_any(b_out->tx_skb); b_out->tx_skb = NULL; } } }

Contributors

PersonTokensPropCommitsCommitProp
linus torvaldslinus torvalds35494.91%133.33%
karsten keilkarsten keil184.83%133.33%
andrew mortonandrew morton10.27%133.33%
Total373100.00%3100.00%


static int st5481_setup_b_out(struct st5481_bcs *bcs) { struct usb_device *dev = bcs->adapter->usb_dev; struct usb_interface *intf; struct usb_host_interface *altsetting = NULL; struct usb_host_endpoint *endpoint; struct st5481_b_out *b_out = &bcs->b_out; DBG(4, ""); intf = usb_ifnum_to_if(dev, 0); if (intf) altsetting = usb_altnum_to_altsetting(intf, 3); if (!altsetting) return -ENXIO; // Allocate URBs and buffers for the B channel out endpoint = &altsetting->endpoint[EP_B1_OUT - 1 + bcs->channel * 2]; DBG(4, "endpoint address=%02x,packet size=%d", endpoint->desc.bEndpointAddress, le16_to_cpu(endpoint->desc.wMaxPacketSize)); // Allocate memory for 8000bytes/sec + extra bytes if underrun return st5481_setup_isocpipes(b_out->urb, dev, usb_sndisocpipe(dev, endpoint->desc.bEndpointAddress), NUM_ISO_PACKETS_B, SIZE_ISO_PACKETS_B_OUT, NUM_ISO_PACKETS_B * SIZE_ISO_PACKETS_B_OUT + B_FLOW_ADJUST, usb_b_out_complete, bcs); }

Contributors

PersonTokensPropCommitsCommitProp
linus torvaldslinus torvalds12173.78%125.00%
alan sternalan stern3219.51%125.00%
greg kroah-hartmangreg kroah-hartman116.71%250.00%
Total164100.00%4100.00%


static void st5481_release_b_out(struct st5481_bcs *bcs) { struct st5481_b_out *b_out = &bcs->b_out; DBG(4, ""); st5481_release_isocpipes(b_out->urb); }

Contributors

PersonTokensPropCommitsCommitProp
linus torvaldslinus torvalds35100.00%1100.00%
Total35100.00%1100.00%


int st5481_setup_b(struct st5481_bcs *bcs) { int retval; DBG(4, ""); retval = st5481_setup_b_out(bcs); if (retval) goto err; bcs->b_in.bufsize = HSCX_BUFMAX; bcs->b_in.num_packets = NUM_ISO_PACKETS_B; bcs->b_in.packet_size = SIZE_ISO_PACKETS_B_IN; bcs->b_in.ep = (bcs->channel ? EP_B2_IN : EP_B1_IN) | USB_DIR_IN; bcs->b_in.counter = bcs->channel ? IN_B2_COUNTER : IN_B1_COUNTER; bcs->b_in.adapter = bcs->adapter; bcs->b_in.hisax_if = &bcs->b_if.ifc; retval = st5481_setup_in(&bcs->b_in); if (retval) goto err_b_out; return 0; err_b_out: st5481_release_b_out(bcs); err: return retval; }

Contributors

PersonTokensPropCommitsCommitProp
linus torvaldslinus torvalds145100.00%1100.00%
Total145100.00%1100.00%

/* * Release buffers and URBs for the B channels */
void st5481_release_b(struct st5481_bcs *bcs) { DBG(4, ""); st5481_release_in(&bcs->b_in); st5481_release_b_out(bcs); }

Contributors

PersonTokensPropCommitsCommitProp
linus torvaldslinus torvalds30100.00%1100.00%
Total30100.00%1100.00%

/* * st5481_b_l2l1 is the entry point for upper layer routines that want to * transmit on the B channel. PH_DATA | REQUEST is a normal packet that * we either start transmitting (if idle) or queue (if busy). * PH_PULL | REQUEST can be called to request a callback message * (PH_PULL | CONFIRM) * once the link is idle. After a "pull" callback, the upper layer * routines can use PH_PULL | INDICATION to send data. */
void st5481_b_l2l1(struct hisax_if *ifc, int pr, void *arg) { struct st5481_bcs *bcs = ifc->priv; struct sk_buff *skb = arg; long mode; DBG(4, ""); switch (pr) { case PH_DATA | REQUEST: BUG_ON(bcs->b_out.tx_skb); bcs->b_out.tx_skb = skb; break; case PH_ACTIVATE | REQUEST: mode = (long) arg; DBG(4, "B%d,PH_ACTIVATE_REQUEST %ld", bcs->channel + 1, mode); st5481B_mode(bcs, mode); B_L1L2(bcs, PH_ACTIVATE | INDICATION, NULL); break; case PH_DEACTIVATE | REQUEST: DBG(4, "B%d,PH_DEACTIVATE_REQUEST", bcs->channel + 1); st5481B_mode(bcs, L1_MODE_NULL); B_L1L2(bcs, PH_DEACTIVATE | INDICATION, NULL); break; default: WARNING("pr %#x\n", pr); } }

Contributors

PersonTokensPropCommitsCommitProp
linus torvaldslinus torvalds15695.71%125.00%
alan coxalan cox31.84%125.00%
eric sesterhenneric sesterhenn31.84%125.00%
arjan van de venarjan van de ven10.61%125.00%
Total163100.00%4100.00%


Overall Contributors

PersonTokensPropCommitsCommitProp
linus torvaldslinus torvalds165189.92%211.11%
andrew mortonandrew morton653.54%15.56%
karsten keilkarsten keil442.40%316.67%
alan sternalan stern321.74%15.56%
greg kroah-hartmangreg kroah-hartman120.65%316.67%
alan coxalan cox70.38%15.56%
oliver neukumoliver neukum70.38%15.56%
akinobu mitaakinobu mita60.33%15.56%
joe perchesjoe perches40.22%15.56%
eric sesterhenneric sesterhenn30.16%15.56%
arjan van de venarjan van de ven20.11%15.56%
tejun heotejun heo20.11%15.56%
lucas de marchilucas de marchi10.05%15.56%
Total1836100.00%18100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}