cregit-Linux how code gets into the kernel

Release 4.7 drivers/media/common/b2c2/flexcop-i2c.c

/*
 * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
 * flexcop-i2c.c - flexcop internal 2Wire bus (I2C) and dvb i2c initialization
 * see flexcop.c for copyright information
 */
#include "flexcop.h"


#define FC_MAX_I2C_RETRIES 100000


static int flexcop_i2c_operation(struct flexcop_device *fc, flexcop_ibi_value *r100) { int i; flexcop_ibi_value r; r100->tw_sm_c_100.working_start = 1; deb_i2c("r100 before: %08x\n",r100->raw); fc->write_ibi_reg(fc, tw_sm_c_100, ibi_zero); fc->write_ibi_reg(fc, tw_sm_c_100, *r100); /* initiating i2c operation */ for (i = 0; i < FC_MAX_I2C_RETRIES; i++) { r = fc->read_ibi_reg(fc, tw_sm_c_100); if (!r.tw_sm_c_100.no_base_addr_ack_error) { if (r.tw_sm_c_100.st_done) { *r100 = r; deb_i2c("i2c success\n"); return 0; } } else { deb_i2c("suffering from an i2c ack_error\n"); return -EREMOTEIO; } } deb_i2c("tried %d times i2c operation, " "never finished or too many ack errors.\n", i); return -EREMOTEIO; }

Contributors

PersonTokensPropCommitsCommitProp
johannes stezenbachjohannes stezenbach14498.63%266.67%
uwe buglauwe bugla21.37%133.33%
Total146100.00%3100.00%


static int flexcop_i2c_read4(struct flexcop_i2c_adapter *i2c, flexcop_ibi_value r100, u8 *buf) { flexcop_ibi_value r104; int len = r100.tw_sm_c_100.total_bytes, /* remember total_bytes is buflen-1 */ ret; /* work-around to have CableStar2 and SkyStar2 rev 2.7 work * correctly: * * the ITD1000 is behind an i2c-gate which closes automatically * after an i2c-transaction the STV0297 needs 2 consecutive reads * one with no_base_addr = 0 and one with 1 * * those two work-arounds are conflictin: we check for the card * type, it is set when probing the ITD1000 */ if (i2c->fc->dev_type == FC_SKY_REV27) r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr; ret = flexcop_i2c_operation(i2c->fc, &r100); if (ret != 0) { deb_i2c("Retrying operation\n"); r100.tw_sm_c_100.no_base_addr_ack_error = i2c->no_base_addr; ret = flexcop_i2c_operation(i2c->fc, &r100); } if (ret != 0) { deb_i2c("read failed. %d\n", ret); return ret; } buf[0] = r100.tw_sm_c_100.data1_reg; if (len > 0) { r104 = i2c->fc->read_ibi_reg(i2c->fc, tw_sm_c_104); deb_i2c("read: r100: %08x, r104: %08x\n", r100.raw, r104.raw); /* there is at least one more byte, otherwise we wouldn't be here */ buf[1] = r104.tw_sm_c_104.data2_reg; if (len > 1) buf[2] = r104.tw_sm_c_104.data3_reg; if (len > 2) buf[3] = r104.tw_sm_c_104.data4_reg; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
johannes stezenbachjohannes stezenbach15371.16%240.00%
patrick boettcherpatrick boettcher3717.21%240.00%
antti seppalaantti seppala2511.63%120.00%
Total215100.00%5100.00%


static int flexcop_i2c_write4(struct flexcop_device *fc, flexcop_ibi_value r100, u8 *buf) { flexcop_ibi_value r104; int len = r100.tw_sm_c_100.total_bytes; /* remember total_bytes is buflen-1 */ r104.raw = 0; /* there is at least one byte, otherwise we wouldn't be here */ r100.tw_sm_c_100.data1_reg = buf[0]; r104.tw_sm_c_104.data2_reg = len > 0 ? buf[1] : 0; r104.tw_sm_c_104.data3_reg = len > 1 ? buf[2] : 0; r104.tw_sm_c_104.data4_reg = len > 2 ? buf[3] : 0; deb_i2c("write: r100: %08x, r104: %08x\n", r100.raw, r104.raw); /* write the additional i2c data before doing the actual i2c operation */ fc->write_ibi_reg(fc, tw_sm_c_104, r104); return flexcop_i2c_operation(fc, &r100); }

Contributors

PersonTokensPropCommitsCommitProp
johannes stezenbachjohannes stezenbach134100.00%2100.00%
Total134100.00%2100.00%


int flexcop_i2c_request(struct flexcop_i2c_adapter *i2c, flexcop_access_op_t op, u8 chipaddr, u8 addr, u8 *buf, u16 len) { int ret; #ifdef DUMP_I2C_MESSAGES int i; #endif u16 bytes_to_transfer; flexcop_ibi_value r100; deb_i2c("op = %d\n",op); r100.raw = 0; r100.tw_sm_c_100.chipaddr = chipaddr; r100.tw_sm_c_100.twoWS_rw = op; r100.tw_sm_c_100.twoWS_port_reg = i2c->port; #ifdef DUMP_I2C_MESSAGES printk(KERN_DEBUG "%d ", i2c->port); if (op == FC_READ) printk("rd("); else printk("wr("); printk("%02x): %02x ", chipaddr, addr); #endif /* in that case addr is the only value -> * we write it twice as baseaddr and val0 * BBTI is doing it like that for ISL6421 at least */ if (i2c->no_base_addr && len == 0 && op == FC_WRITE) { buf = &addr; len = 1; } while (len != 0) { bytes_to_transfer = len > 4 ? 4 : len; r100.tw_sm_c_100.total_bytes = bytes_to_transfer - 1; r100.tw_sm_c_100.baseaddr = addr; if (op == FC_READ) ret = flexcop_i2c_read4(i2c, r100, buf); else ret = flexcop_i2c_write4(i2c->fc, r100, buf); #ifdef DUMP_I2C_MESSAGES for (i = 0; i < bytes_to_transfer; i++) printk("%02x ", buf[i]); #endif if (ret < 0) return ret; buf += bytes_to_transfer; addr += bytes_to_transfer; len -= bytes_to_transfer; } #ifdef DUMP_I2C_MESSAGES printk("\n"); #endif return 0; }

Contributors

PersonTokensPropCommitsCommitProp
johannes stezenbachjohannes stezenbach15856.83%266.67%
patrick boettcherpatrick boettcher12043.17%133.33%
Total278100.00%3100.00%

/* exported for PCI i2c */ EXPORT_SYMBOL(flexcop_i2c_request); /* master xfer callback for demodulator */
static int flexcop_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) { struct flexcop_i2c_adapter *i2c = i2c_get_adapdata(i2c_adap); int i, ret = 0; /* Some drivers use 1 byte or 0 byte reads as probes, which this * driver doesn't support. These probes will always fail, so this * hack makes them always succeed. If one knew how, it would of * course be better to actually do the read. */ if (num == 1 && msgs[0].flags == I2C_M_RD && msgs[0].len <= 1) return 1; if (mutex_lock_interruptible(&i2c->fc->i2c_mutex)) return -ERESTARTSYS; for (i = 0; i < num; i++) { /* reading */ if (i+1 < num && (msgs[i+1].flags == I2C_M_RD)) { ret = i2c->fc->i2c_request(i2c, FC_READ, msgs[i].addr, msgs[i].buf[0], msgs[i+1].buf, msgs[i+1].len); i++; /* skip the following message */ } else /* writing */ ret = i2c->fc->i2c_request(i2c, FC_WRITE, msgs[i].addr, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1); if (ret < 0) { deb_i2c("i2c master_xfer failed"); break; } } mutex_unlock(&i2c->fc->i2c_mutex); if (ret == 0) ret = num; return ret; }

Contributors

PersonTokensPropCommitsCommitProp
johannes stezenbachjohannes stezenbach17065.38%120.00%
patrick boettcherpatrick boettcher5721.92%120.00%
trent piephotrent piepho2810.77%120.00%
ingo molnaringo molnar41.54%120.00%
matthias schwarzottmatthias schwarzott10.38%120.00%
Total260100.00%5100.00%


static u32 flexcop_i2c_func(struct i2c_adapter *adapter) { return I2C_FUNC_I2C; }

Contributors

PersonTokensPropCommitsCommitProp
johannes stezenbachjohannes stezenbach14100.00%1100.00%
Total14100.00%1100.00%

static struct i2c_algorithm flexcop_algo = { .master_xfer = flexcop_master_xfer, .functionality = flexcop_i2c_func, };
int flexcop_i2c_init(struct flexcop_device *fc) { int ret; mutex_init(&fc->i2c_mutex); fc->fc_i2c_adap[0].fc = fc; fc->fc_i2c_adap[1].fc = fc; fc->fc_i2c_adap[2].fc = fc; fc->fc_i2c_adap[0].port = FC_I2C_PORT_DEMOD; fc->fc_i2c_adap[1].port = FC_I2C_PORT_EEPROM; fc->fc_i2c_adap[2].port = FC_I2C_PORT_TUNER; strlcpy(fc->fc_i2c_adap[0].i2c_adap.name, "B2C2 FlexCop I2C to demod", sizeof(fc->fc_i2c_adap[0].i2c_adap.name)); strlcpy(fc->fc_i2c_adap[1].i2c_adap.name, "B2C2 FlexCop I2C to eeprom", sizeof(fc->fc_i2c_adap[1].i2c_adap.name)); strlcpy(fc->fc_i2c_adap[2].i2c_adap.name, "B2C2 FlexCop I2C to tuner", sizeof(fc->fc_i2c_adap[2].i2c_adap.name)); i2c_set_adapdata(&fc->fc_i2c_adap[0].i2c_adap, &fc->fc_i2c_adap[0]); i2c_set_adapdata(&fc->fc_i2c_adap[1].i2c_adap, &fc->fc_i2c_adap[1]); i2c_set_adapdata(&fc->fc_i2c_adap[2].i2c_adap, &fc->fc_i2c_adap[2]); fc->fc_i2c_adap[0].i2c_adap.algo = fc->fc_i2c_adap[1].i2c_adap.algo = fc->fc_i2c_adap[2].i2c_adap.algo = &flexcop_algo; fc->fc_i2c_adap[0].i2c_adap.algo_data = fc->fc_i2c_adap[1].i2c_adap.algo_data = fc->fc_i2c_adap[2].i2c_adap.algo_data = NULL; fc->fc_i2c_adap[0].i2c_adap.dev.parent = fc->fc_i2c_adap[1].i2c_adap.dev.parent = fc->fc_i2c_adap[2].i2c_adap.dev.parent = fc->dev; ret = i2c_add_adapter(&fc->fc_i2c_adap[0].i2c_adap); if (ret < 0) return ret; ret = i2c_add_adapter(&fc->fc_i2c_adap[1].i2c_adap); if (ret < 0) goto adap_1_failed; ret = i2c_add_adapter(&fc->fc_i2c_adap[2].i2c_adap); if (ret < 0) goto adap_2_failed; fc->init_state |= FC_STATE_I2C_INIT; return 0; adap_2_failed: i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap); adap_1_failed: i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
patrick boettcherpatrick boettcher31968.16%116.67%
johannes stezenbachjohannes stezenbach8618.38%116.67%
jean delvarejean delvare5411.54%233.33%
david brownelldavid brownell71.50%116.67%
ingo molnaringo molnar20.43%116.67%
Total468100.00%6100.00%


void flexcop_i2c_exit(struct flexcop_device *fc) { if (fc->init_state & FC_STATE_I2C_INIT) { i2c_del_adapter(&fc->fc_i2c_adap[2].i2c_adap); i2c_del_adapter(&fc->fc_i2c_adap[1].i2c_adap); i2c_del_adapter(&fc->fc_i2c_adap[0].i2c_adap); } fc->init_state &= ~FC_STATE_I2C_INIT; }

Contributors

PersonTokensPropCommitsCommitProp
patrick boettcherpatrick boettcher3350.00%150.00%
johannes stezenbachjohannes stezenbach3350.00%150.00%
Total66100.00%2100.00%


Overall Contributors

PersonTokensPropCommitsCommitProp
johannes stezenbachjohannes stezenbach92357.22%216.67%
patrick boettcherpatrick boettcher56635.09%216.67%
jean delvarejean delvare543.35%216.67%
trent piephotrent piepho281.74%18.33%
antti seppalaantti seppala251.55%18.33%
david brownelldavid brownell70.43%18.33%
ingo molnaringo molnar60.37%18.33%
uwe buglauwe bugla30.19%18.33%
matthias schwarzottmatthias schwarzott10.06%18.33%
Total1613100.00%12100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}