cregit-Linux how code gets into the kernel

Release 4.7 drivers/media/dvb-frontends/au8522_common.c

Directory: drivers/media/dvb-frontends
/*
    Auvitek AU8522 QAM/8VSB demodulator driver

    Copyright (C) 2008 Steven Toth <stoth@linuxtv.org>
    Copyright (C) 2008 Devin Heitmueller <dheitmueller@linuxtv.org>
    Copyright (C) 2005-2008 Auvitek International, Ltd.
    Copyright (C) 2012 Michael Krufky <mkrufky@linuxtv.org>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

*/

#include <linux/i2c.h>
#include "dvb_frontend.h"
#include "au8522_priv.h"


static int debug;


#define dprintk(arg...)\
  do { if (debug)\
         printk(arg);\
  } while (0)

/* Despite the name "hybrid_tuner", the framework works just as well for
   hybrid demodulators as well... */
static LIST_HEAD(hybrid_tuner_instance_list);
static DEFINE_MUTEX(au8522_list_mutex);

/* 16 bit registers, 8 bit values */



int au8522_writereg(struct au8522_state *state, u16 reg, u8 data)
{
	int ret;
	u8 buf[] = { (reg >> 8) | 0x80, reg & 0xff, data };

	struct i2c_msg msg = { .addr = state->config.demod_address,
			       .flags = 0, .buf = buf, .len = 3 };

	ret = i2c_transfer(state->i2c, &msg, 1);

	if (ret != 1)
		printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, "
		       "ret == %i)\n", __func__, reg, data, ret);

	return (ret != 1) ? -1 : 0;
}

Contributors
PersonTokensPropCommitsCommitProp
michael krufkymichael krufky11499.13%150.00%


mauro carvalho chehabmauro carvalho chehab10.87%150.00%


Total115100.00%2100.00%




EXPORT_SYMBOL(au8522_writereg);




u8 au8522_readreg(struct au8522_state *state, u16 reg)
{
	int ret;
	u8 b0[] = { (reg >> 8) | 0x40, reg & 0xff };
	u8 b1[] = { 0 };

	struct i2c_msg msg[] = {
		{ .addr = state->config.demod_address, .flags = 0,
		  .buf = b0, .len = 2 },
		{ .addr = state->config.demod_address, .flags = I2C_M_RD,
		  .buf = b1, .len = 1 } };

	ret = i2c_transfer(state->i2c, msg, 2);

	if (ret != 2)
		printk(KERN_ERR "%s: readreg error (ret == %i)\n",
		       __func__, ret);
	return b1[0];
}

Contributors
PersonTokensPropCommitsCommitProp
michael krufkymichael krufky13498.53%150.00%


mauro carvalho chehabmauro carvalho chehab21.47%150.00%


Total136100.00%2100.00%




EXPORT_SYMBOL(au8522_readreg);




int au8522_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
{
	struct au8522_state *state = fe->demodulator_priv;

	dprintk("%s(%d)\n", __func__, enable);

	if (state->operational_mode == AU8522_ANALOG_MODE) {
		/* We're being asked to manage the gate even though we're
                   not in digital mode.  This can occur if we get switched
                   over to analog mode before the dvb_frontend kernel thread
                   has completely shutdown */
		return 0;
	}

	if (enable)
		return au8522_writereg(state, 0x106, 1);
	else
		return au8522_writereg(state, 0x106, 0);
}

Contributors
PersonTokensPropCommitsCommitProp
michael krufkymichael krufky70100.00%1100.00%


Total70100.00%1100.00%




EXPORT_SYMBOL(au8522_i2c_gate_ctrl);




int au8522_analog_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
{
	struct au8522_state *state = fe->demodulator_priv;

	dprintk("%s(%d)\n", __func__, enable);

	if (enable)
		return au8522_writereg(state, 0x106, 1);
	else
		return au8522_writereg(state, 0x106, 0);
}

Contributors
PersonTokensPropCommitsCommitProp
devin heitmuellerdevin heitmueller56100.00%1100.00%


Total56100.00%1100.00%




EXPORT_SYMBOL(au8522_analog_i2c_gate_ctrl);

/* Reset the demod hardware and reset all of the configuration registers
   to a default state. */



int au8522_get_state(struct au8522_state **state, struct i2c_adapter *i2c,
		     u8 client_address)
{
	int ret;

	mutex_lock(&au8522_list_mutex);
	ret = hybrid_tuner_request_state(struct au8522_state, (*state),
					 hybrid_tuner_instance_list,
					 i2c, client_address, "au8522");
	mutex_unlock(&au8522_list_mutex);

	return ret;
}

Contributors
PersonTokensPropCommitsCommitProp
michael krufkymichael krufky58100.00%1100.00%


Total58100.00%1100.00%




EXPORT_SYMBOL(au8522_get_state);




void au8522_release_state(struct au8522_state *state)
{
	mutex_lock(&au8522_list_mutex);
	if (state != NULL)
		hybrid_tuner_release_state(state);
	mutex_unlock(&au8522_list_mutex);
}

Contributors
PersonTokensPropCommitsCommitProp
michael krufkymichael krufky33100.00%1100.00%


Total33100.00%1100.00%




EXPORT_SYMBOL(au8522_release_state);




static int au8522_led_gpio_enable(struct au8522_state *state, int onoff)
{
	struct au8522_led_config *led_config = state->config.led_cfg;
	u8 val;

	/* bail out if we can't control an LED */
	if (!led_config || !led_config->gpio_output ||
	    !led_config->gpio_output_enable || !led_config->gpio_output_disable)
		return 0;

	val = au8522_readreg(state, 0x4000 |
			     (led_config->gpio_output & ~0xc000));
	if (onoff) {
		/* enable GPIO output */
		val &= ~((led_config->gpio_output_enable >> 8) & 0xff);
		val |=  (led_config->gpio_output_enable & 0xff);
	} else {
		/* disable GPIO output */
		val &= ~((led_config->gpio_output_disable >> 8) & 0xff);
		val |=  (led_config->gpio_output_disable & 0xff);
	}
	return au8522_writereg(state, 0x8000 |
			       (led_config->gpio_output & ~0xc000), val);
}


Contributors
PersonTokensPropCommitsCommitProp
michael krufkymichael krufky14999.33%266.67%


mauro carvalho chehabmauro carvalho chehab10.67%133.33%


Total150100.00%3100.00%



/* led = 0 | off
 * led = 1 | signal ok
 * led = 2 | signal strong
 * led < 0 | only light led if leds are currently off
 */



int au8522_led_ctrl(struct au8522_state *state, int led)
{
	struct au8522_led_config *led_config = state->config.led_cfg;
	int i, ret = 0;

	/* bail out if we can't control an LED */
	if (!led_config || !led_config->gpio_leds ||
	    !led_config->num_led_states || !led_config->led_states)
		return 0;

	if (led < 0) {
		/* if LED is already lit, then leave it as-is */
		if (state->led_state)
			return 0;
		else
			led *= -1;
	}

	/* toggle LED if changing state */
	if (state->led_state != led) {
		u8 val;

		dprintk("%s: %d\n", __func__, led);

		au8522_led_gpio_enable(state, 1);

		val = au8522_readreg(state, 0x4000 |
				     (led_config->gpio_leds & ~0xc000));

		/* start with all leds off */
		for (i = 0; i < led_config->num_led_states; i++)
			val &= ~led_config->led_states[i];

		/* set selected LED state */
		if (led < led_config->num_led_states)
			val |= led_config->led_states[led];
		else if (led_config->num_led_states)
			val |=
			led_config->led_states[led_config->num_led_states - 1];

		ret = au8522_writereg(state, 0x8000 |
				      (led_config->gpio_leds & ~0xc000), val);
		if (ret < 0)
			return ret;

		state->led_state = led;

		if (led == 0)
			au8522_led_gpio_enable(state, 0);
	}

	return 0;
}

Contributors
PersonTokensPropCommitsCommitProp
michael krufkymichael krufky24199.59%150.00%


mauro carvalho chehabmauro carvalho chehab10.41%150.00%


Total242100.00%2100.00%




EXPORT_SYMBOL(au8522_led_ctrl);




int au8522_init(struct dvb_frontend *fe)
{
	struct au8522_state *state = fe->demodulator_priv;
	dprintk("%s()\n", __func__);

	state->operational_mode = AU8522_DIGITAL_MODE;

	/* Clear out any state associated with the digital side of the
           chip, so that when it gets powered back up it won't think
           that it is already tuned */
	state->current_frequency = 0;

	au8522_writereg(state, 0xa4, 1 << 5);

	au8522_i2c_gate_ctrl(fe, 1);

	return 0;
}

Contributors
PersonTokensPropCommitsCommitProp
michael krufkymichael krufky60100.00%1100.00%


Total60100.00%1100.00%




EXPORT_SYMBOL(au8522_init);




int au8522_sleep(struct dvb_frontend *fe)
{
	struct au8522_state *state = fe->demodulator_priv;
	dprintk("%s()\n", __func__);

	/* Only power down if the digital side is currently using the chip */
	if (state->operational_mode == AU8522_ANALOG_MODE) {
		/* We're not in one of the expected power modes, which means
                   that the DVB thread is probably telling us to go to sleep
                   even though the analog frontend has already started using
                   the chip.  So ignore the request */
		return 0;
	}

	/* turn off led */
	au8522_led_ctrl(state, 0);

	/* Power down the chip */
	au8522_writereg(state, 0xa4, 1 << 5);

	state->current_frequency = 0;

	return 0;
}

Contributors
PersonTokensPropCommitsCommitProp
michael krufkymichael krufky70100.00%1100.00%


Total70100.00%1100.00%




EXPORT_SYMBOL(au8522_sleep);

module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Enable verbose debug messages");

MODULE_DESCRIPTION("Auvitek AU8522 QAM-B/ATSC Demodulator driver");
MODULE_AUTHOR("Steven Toth");
MODULE_LICENSE("GPL");

Overall Contributors
PersonTokensPropCommitsCommitProp
michael krufkymichael krufky100891.22%240.00%


devin heitmuellerdevin heitmueller928.33%240.00%


mauro carvalho chehabmauro carvalho chehab50.45%120.00%


Total1105100.00%5100.00%

  
Directory: drivers/media/dvb-frontends



Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}