cregit-Linux how code gets into the kernel

Release 4.7 drivers/media/dvb-frontends/lnbh25.c

/*
 * lnbh25.c
 *
 * Driver for LNB supply and control IC LNBH25
 *
 * Copyright (C) 2014 NetUP Inc.
 * Copyright (C) 2014 Sergey Kozlov <serjk@netup.ru>
 * Copyright (C) 2014 Abylay Ospan <aospan@netup.ru>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/module.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/slab.h>

#include "dvb_frontend.h"
#include "lnbh25.h"

/**
 * struct lnbh25_priv - LNBH25 driver private data
 * @i2c:                pointer to the I2C adapter structure
 * @i2c_address:        I2C address of LNBH25 SEC chip
 * @config:             Registers configuration:
 *                      offset 0: 1st register address, always 0x02 (DATA1)
 *                      offset 1: DATA1 register value
 *                      offset 2: DATA2 register value
 */

struct lnbh25_priv {
	
struct i2c_adapter	*i2c;
	
u8			i2c_address;
	
u8			config[3];
};


#define LNBH25_STATUS_OFL	0x1

#define LNBH25_STATUS_VMON	0x4

#define LNBH25_VSEL_13		0x03

#define LNBH25_VSEL_18		0x0a


static int lnbh25_read_vmon(struct lnbh25_priv *priv) { int i, ret; u8 addr = 0x00; u8 status[6]; struct i2c_msg msg[2] = { { .addr = priv->i2c_address, .flags = 0, .len = 1, .buf = &addr }, { .addr = priv->i2c_address, .flags = I2C_M_RD, .len = sizeof(status), .buf = status } }; for (i = 0; i < 2; i++) { ret = i2c_transfer(priv->i2c, &msg[i], 1); if (ret >= 0 && ret != 1) ret = -EIO; if (ret < 0) { dev_dbg(&priv->i2c->dev, "%s(): I2C transfer %d failed (%d)\n", __func__, i, ret); return ret; } } print_hex_dump_bytes("lnbh25_read_vmon: ", DUMP_PREFIX_OFFSET, status, sizeof(status)); if ((status[0] & (LNBH25_STATUS_OFL | LNBH25_STATUS_VMON)) != 0) { dev_err(&priv->i2c->dev, "%s(): voltage in failure state, status reg 0x%x\n", __func__, status[0]); return -EIO; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
kozlov sergeykozlov sergey223100.00%1100.00%
Total223100.00%1100.00%


static int lnbh25_set_voltage(struct dvb_frontend *fe, enum fe_sec_voltage voltage) { int ret; u8 data1_reg; const char *vsel; struct lnbh25_priv *priv = fe->sec_priv; struct i2c_msg msg = { .addr = priv->i2c_address, .flags = 0, .len = sizeof(priv->config), .buf = priv->config }; switch (voltage) { case SEC_VOLTAGE_OFF: data1_reg = 0x00; vsel = "Off"; break; case SEC_VOLTAGE_13: data1_reg = LNBH25_VSEL_13; vsel = "13V"; break; case SEC_VOLTAGE_18: data1_reg = LNBH25_VSEL_18; vsel = "18V"; break; default: return -EINVAL; } priv->config[1] = data1_reg; dev_dbg(&priv->i2c->dev, "%s(): %s, I2C 0x%x write [ %02x %02x %02x ]\n", __func__, vsel, priv->i2c_address, priv->config[0], priv->config[1], priv->config[2]); ret = i2c_transfer(priv->i2c, &msg, 1); if (ret >= 0 && ret != 1) ret = -EIO; if (ret < 0) { dev_err(&priv->i2c->dev, "%s(): I2C transfer error (%d)\n", __func__, ret); return ret; } if (voltage != SEC_VOLTAGE_OFF) { msleep(120); ret = lnbh25_read_vmon(priv); } else { msleep(20); ret = 0; } return ret; }

Contributors

PersonTokensPropCommitsCommitProp
kozlov sergeykozlov sergey258100.00%1100.00%
Total258100.00%1100.00%


static void lnbh25_release(struct dvb_frontend *fe) { struct lnbh25_priv *priv = fe->sec_priv; dev_dbg(&priv->i2c->dev, "%s()\n", __func__); lnbh25_set_voltage(fe, SEC_VOLTAGE_OFF); kfree(fe->sec_priv); fe->sec_priv = NULL; }

Contributors

PersonTokensPropCommitsCommitProp
kozlov sergeykozlov sergey54100.00%1100.00%
Total54100.00%1100.00%


struct dvb_frontend *lnbh25_attach(struct dvb_frontend *fe, struct lnbh25_config *cfg, struct i2c_adapter *i2c) { struct lnbh25_priv *priv; dev_dbg(&i2c->dev, "%s()\n", __func__); priv = kzalloc(sizeof(struct lnbh25_priv), GFP_KERNEL); if (!priv) return NULL; priv->i2c_address = (cfg->i2c_address >> 1); priv->i2c = i2c; priv->config[0] = 0x02; priv->config[1] = 0x00; priv->config[2] = cfg->data2_config; fe->sec_priv = priv; if (lnbh25_set_voltage(fe, SEC_VOLTAGE_OFF)) { dev_err(&i2c->dev, "%s(): no LNBH25 found at I2C addr 0x%02x\n", __func__, priv->i2c_address); kfree(priv); fe->sec_priv = NULL; return NULL; } fe->ops.release_sec = lnbh25_release; fe->ops.set_voltage = lnbh25_set_voltage; dev_err(&i2c->dev, "%s(): attached at I2C addr 0x%02x\n", __func__, priv->i2c_address); return fe; }

Contributors

PersonTokensPropCommitsCommitProp
kozlov sergeykozlov sergey189100.00%1100.00%
Total189100.00%1100.00%

EXPORT_SYMBOL(lnbh25_attach); MODULE_DESCRIPTION("ST LNBH25 driver"); MODULE_AUTHOR("info@netup.ru"); MODULE_LICENSE("GPL");

Overall Contributors

PersonTokensPropCommitsCommitProp
kozlov sergeykozlov sergey799100.00%1100.00%
Total799100.00%1100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}