cregit-Linux how code gets into the kernel

Release 4.7 drivers/media/pci/bt8xx/bttv-audio-hook.c

/*
 * Handlers for board audio hooks, splitted from bttv-cards
 *
 * Copyright (c) 2006 Mauro Carvalho Chehab (mchehab@infradead.org)
 * This code is placed under the terms of the GNU General Public License
 */

#include "bttv-audio-hook.h"

#include <linux/delay.h>

/* ----------------------------------------------------------------------- */
/* winview                                                                 */


void winview_volume(struct bttv *btv, __u16 volume) { /* PT2254A programming Jon Tombs, jon@gte.esi.us.es */ int bits_out, loops, vol, data; /* 32 levels logarithmic */ vol = 32 - ((volume>>11)); /* units */ bits_out = (PT2254_DBS_IN_2>>(vol%5)); /* tens */ bits_out |= (PT2254_DBS_IN_10>>(vol/5)); bits_out |= PT2254_L_CHANNEL | PT2254_R_CHANNEL; data = gpio_read(); data &= ~(WINVIEW_PT2254_CLK| WINVIEW_PT2254_DATA| WINVIEW_PT2254_STROBE); for (loops = 17; loops >= 0 ; loops--) { if (bits_out & (1<<loops)) data |= WINVIEW_PT2254_DATA; else data &= ~WINVIEW_PT2254_DATA; gpio_write(data); udelay(5); data |= WINVIEW_PT2254_CLK; gpio_write(data); udelay(5); data &= ~WINVIEW_PT2254_CLK; gpio_write(data); } data |= WINVIEW_PT2254_STROBE; data &= ~WINVIEW_PT2254_DATA; gpio_write(data); udelay(10); data &= ~WINVIEW_PT2254_STROBE; gpio_write(data); }

Contributors

PersonTokensPropCommitsCommitProp
mauro carvalho chehabmauro carvalho chehab17998.35%150.00%
nickolay v. shmyrevnickolay v. shmyrev31.65%150.00%
Total182100.00%2100.00%

/* ----------------------------------------------------------------------- */ /* mono/stereo control for various cards (which don't use i2c chips but */ /* connect something to the GPIO pins */
void gvbctv3pci_audio(struct bttv *btv, struct v4l2_tuner *t, int set) { unsigned int con; if (!set) { /* Not much to do here */ t->audmode = V4L2_TUNER_MODE_LANG1; t->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; return; } gpio_inout(0x300, 0x300); switch (t->audmode) { case V4L2_TUNER_MODE_LANG1: default: con = 0x000; break; case V4L2_TUNER_MODE_LANG2: con = 0x300; break; case V4L2_TUNER_MODE_STEREO: con = 0x200; break; } gpio_bits(0x300, con); }

Contributors

PersonTokensPropCommitsCommitProp
mauro carvalho chehabmauro carvalho chehab8992.71%266.67%
nickolay v. shmyrevnickolay v. shmyrev77.29%133.33%
Total96100.00%3100.00%


void gvbctv5pci_audio(struct bttv *btv, struct v4l2_tuner *t, int set) { unsigned int val, con; if (btv->radio_user) return; val = gpio_read(); if (set) { switch (t->audmode) { case V4L2_TUNER_MODE_LANG2: con = 0x300; break; case V4L2_TUNER_MODE_LANG1_LANG2: con = 0x100; break; default: con = 0x000; break; } if (con != (val & 0x300)) { gpio_bits(0x300, con); if (bttv_gpio) bttv_gpio_tracking(btv, "gvbctv5pci"); } } else { switch (val & 0x70) { case 0x10: t->rxsubchans = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; t->audmode = V4L2_TUNER_MODE_LANG1_LANG2; break; case 0x30: t->rxsubchans = V4L2_TUNER_SUB_LANG2; t->audmode = V4L2_TUNER_MODE_LANG1_LANG2; break; case 0x50: t->rxsubchans = V4L2_TUNER_SUB_LANG1; t->audmode = V4L2_TUNER_MODE_LANG1_LANG2; break; case 0x60: t->rxsubchans = V4L2_TUNER_SUB_STEREO; t->audmode = V4L2_TUNER_MODE_STEREO; break; case 0x70: t->rxsubchans = V4L2_TUNER_SUB_MONO; t->audmode = V4L2_TUNER_MODE_MONO; break; default: t->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; t->audmode = V4L2_TUNER_MODE_LANG1; } } }

Contributors

PersonTokensPropCommitsCommitProp
mauro carvalho chehabmauro carvalho chehab17983.64%250.00%
nickolay v. shmyrevnickolay v. shmyrev3516.36%250.00%
Total214100.00%4100.00%

/* * Mario Medina Nussbaum <medisoft@alohabbs.org.mx> * I discover that on BT848_GPIO_DATA address a byte 0xcce enable stereo, * 0xdde enables mono and 0xccd enables sap * * Petr Vandrovec <VANDROVE@vc.cvut.cz> * P.S.: At least mask in line above is wrong - GPIO pins 3,2 select * input/output sound connection, so both must be set for output mode. * * Looks like it's needed only for the "tvphone", the "tvphone 98" * handles this with a tda9840 * */
void avermedia_tvphone_audio(struct bttv *btv, struct v4l2_tuner *t, int set) { int val; if (!set) { /* Not much to do here */ t->audmode = V4L2_TUNER_MODE_LANG1; t->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; return; } switch (t->audmode) { case V4L2_TUNER_MODE_LANG2: /* SAP */ val = 0x02; break; case V4L2_TUNER_MODE_STEREO: val = 0x01; break; default: return; } gpio_bits(0x03, val); if (bttv_gpio) bttv_gpio_tracking(btv, "avermedia"); }

Contributors

PersonTokensPropCommitsCommitProp
mauro carvalho chehabmauro carvalho chehab8793.55%266.67%
nickolay v. shmyrevnickolay v. shmyrev66.45%133.33%
Total93100.00%3100.00%


void avermedia_tv_stereo_audio(struct bttv *btv, struct v4l2_tuner *t, int set) { int val = 0; if (!set) { /* Not much to do here */ t->audmode = V4L2_TUNER_MODE_LANG1; t->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; return; } switch (t->audmode) { case V4L2_TUNER_MODE_LANG2: /* SAP */ val = 0x01; break; case V4L2_TUNER_MODE_STEREO: val = 0x02; break; default: val = 0; break; } btaor(val, ~0x03, BT848_GPIO_DATA); if (bttv_gpio) bttv_gpio_tracking(btv, "avermedia"); }

Contributors

PersonTokensPropCommitsCommitProp
mauro carvalho chehabmauro carvalho chehab9694.12%266.67%
nickolay v. shmyrevnickolay v. shmyrev65.88%133.33%
Total102100.00%3100.00%

/* Lifetec 9415 handling */
void lt9415_audio(struct bttv *btv, struct v4l2_tuner *t, int set) { int val = 0; if (gpio_read() & 0x4000) { t->audmode = V4L2_TUNER_MODE_MONO; return; } if (!set) { /* Not much to do here */ t->audmode = V4L2_TUNER_MODE_LANG1; t->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; return; } switch (t->audmode) { case V4L2_TUNER_MODE_LANG2: /* A2 SAP */ val = 0x0080; break; case V4L2_TUNER_MODE_STEREO: /* A2 stereo */ val = 0x0880; break; default: val = 0; break; } gpio_bits(0x0880, val); if (bttv_gpio) bttv_gpio_tracking(btv, "lt9415"); }

Contributors

PersonTokensPropCommitsCommitProp
mauro carvalho chehabmauro carvalho chehab10792.24%266.67%
nickolay v. shmyrevnickolay v. shmyrev97.76%133.33%
Total116100.00%3100.00%

/* TDA9821 on TerraTV+ Bt848, Bt878 */
void terratv_audio(struct bttv *btv, struct v4l2_tuner *t, int set) { unsigned int con = 0; if (!set) { /* Not much to do here */ t->audmode = V4L2_TUNER_MODE_LANG1; t->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; return; } gpio_inout(0x180000, 0x180000); switch (t->audmode) { case V4L2_TUNER_MODE_LANG2: con = 0x080000; break; case V4L2_TUNER_MODE_STEREO: con = 0x180000; break; default: con = 0; break; } gpio_bits(0x180000, con); if (bttv_gpio) bttv_gpio_tracking(btv, "terratv"); }

Contributors

PersonTokensPropCommitsCommitProp
mauro carvalho chehabmauro carvalho chehab10094.34%266.67%
nickolay v. shmyrevnickolay v. shmyrev65.66%133.33%
Total106100.00%3100.00%


void winfast2000_audio(struct bttv *btv, struct v4l2_tuner *t, int set) { unsigned long val; if (!set) { /* Not much to do here */ t->audmode = V4L2_TUNER_MODE_LANG1; t->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; return; } /*btor (0xc32000, BT848_GPIO_OUT_EN);*/ switch (t->audmode) { case V4L2_TUNER_MODE_MONO: case V4L2_TUNER_MODE_LANG1: val = 0x420000; break; case V4L2_TUNER_MODE_LANG2: /* SAP */ val = 0x410000; break; case V4L2_TUNER_MODE_STEREO: val = 0x020000; break; default: return; } gpio_bits(0x430000, val); if (bttv_gpio) bttv_gpio_tracking(btv, "winfast2000"); }

Contributors

PersonTokensPropCommitsCommitProp
mauro carvalho chehabmauro carvalho chehab9791.51%266.67%
nickolay v. shmyrevnickolay v. shmyrev98.49%133.33%
Total106100.00%3100.00%

/* * Dariusz Kowalewski <darekk@automex.pl> * sound control for Prolink PV-BT878P+9B (PixelView PlayTV Pro FM+NICAM * revision 9B has on-board TDA9874A sound decoder). * * Note: There are card variants without tda9874a. Forcing the "stereo sound route" * will mute this cards. */
void pvbt878p9b_audio(struct bttv *btv, struct v4l2_tuner *t, int set) { unsigned int val = 0; if (btv->radio_user) return; if (!set) { /* Not much to do here */ t->audmode = V4L2_TUNER_MODE_LANG1; t->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; return; } switch (t->audmode) { case V4L2_TUNER_MODE_MONO: val = 0x01; break; case V4L2_TUNER_MODE_LANG1: case V4L2_TUNER_MODE_LANG2: case V4L2_TUNER_MODE_STEREO: val = 0x02; break; default: return; } gpio_bits(0x03, val); if (bttv_gpio) bttv_gpio_tracking(btv, "pvbt878p9b"); }

Contributors

PersonTokensPropCommitsCommitProp
mauro carvalho chehabmauro carvalho chehab9890.74%266.67%
nickolay v. shmyrevnickolay v. shmyrev109.26%133.33%
Total108100.00%3100.00%

/* * Dariusz Kowalewski <darekk@automex.pl> * sound control for FlyVideo 2000S (with tda9874 decoder) * based on pvbt878p9b_audio() - this is not tested, please fix!!! */
void fv2000s_audio(struct bttv *btv, struct v4l2_tuner *t, int set) { unsigned int val; if (btv->radio_user) return; if (!set) { /* Not much to do here */ t->audmode = V4L2_TUNER_MODE_LANG1; t->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; return; } switch (t->audmode) { case V4L2_TUNER_MODE_MONO: val = 0x0000; break; case V4L2_TUNER_MODE_LANG1: case V4L2_TUNER_MODE_LANG2: case V4L2_TUNER_MODE_STEREO: val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */ break; default: return; } gpio_bits(0x1800, val); if (bttv_gpio) bttv_gpio_tracking(btv, "fv2000s"); }

Contributors

PersonTokensPropCommitsCommitProp
mauro carvalho chehabmauro carvalho chehab9992.52%266.67%
nickolay v. shmyrevnickolay v. shmyrev87.48%133.33%
Total107100.00%3100.00%

/* * sound control for Canopus WinDVR PCI * Masaki Suzuki <masaki@btree.org> */
void windvr_audio(struct bttv *btv, struct v4l2_tuner *t, int set) { unsigned long val; if (!set) { /* Not much to do here */ t->audmode = V4L2_TUNER_MODE_LANG1; t->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; return; } switch (t->audmode) { case V4L2_TUNER_MODE_MONO: val = 0x040000; break; case V4L2_TUNER_MODE_LANG2: val = 0x100000; break; default: return; } gpio_bits(0x140000, val); if (bttv_gpio) bttv_gpio_tracking(btv, "windvr"); }

Contributors

PersonTokensPropCommitsCommitProp
mauro carvalho chehabmauro carvalho chehab8591.40%266.67%
nickolay v. shmyrevnickolay v. shmyrev88.60%133.33%
Total93100.00%3100.00%

/* * sound control for AD-TVK503 * Hiroshi Takekawa <sian@big.or.jp> */
void adtvk503_audio(struct bttv *btv, struct v4l2_tuner *t, int set) { unsigned int con = 0xffffff; /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */ if (!set) { /* Not much to do here */ t->audmode = V4L2_TUNER_MODE_LANG1; t->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO | V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; return; } /* btor(***, BT848_GPIO_OUT_EN); */ switch (t->audmode) { case V4L2_TUNER_MODE_LANG1: con = 0x00000000; break; case V4L2_TUNER_MODE_LANG2: con = 0x00180000; break; case V4L2_TUNER_MODE_STEREO: con = 0x00000000; break; case V4L2_TUNER_MODE_MONO: con = 0x00060000; break; default: return; } gpio_bits(0x1e0000, con); if (bttv_gpio) bttv_gpio_tracking(btv, "adtvk503"); }

Contributors

PersonTokensPropCommitsCommitProp
mauro carvalho chehabmauro carvalho chehab10391.15%266.67%
nickolay v. shmyrevnickolay v. shmyrev108.85%133.33%
Total113100.00%3100.00%


Overall Contributors

PersonTokensPropCommitsCommitProp
mauro carvalho chehabmauro carvalho chehab133291.55%240.00%
nickolay v. shmyrevnickolay v. shmyrev1238.45%360.00%
Total1455100.00%5100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}