Release 4.7 drivers/media/platform/exynos-gsc/gsc-core.h
/*
* Copyright (c) 2011 - 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* header file for Samsung EXYNOS5 SoC series G-Scaler driver
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef GSC_CORE_H_
#define GSC_CORE_H_
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <linux/videodev2.h>
#include <linux/io.h>
#include <linux/pm_runtime.h>
#include <media/videobuf2-v4l2.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-mem2mem.h>
#include <media/v4l2-mediabus.h>
#include <media/videobuf2-dma-contig.h>
#include "gsc-regs.h"
#define CONFIG_VB2_GSC_DMA_CONTIG 1
#define GSC_MODULE_NAME "exynos-gsc"
#define GSC_SHUTDOWN_TIMEOUT ((100*HZ)/1000)
#define GSC_MAX_DEVS 4
#define GSC_M2M_BUF_NUM 0
#define GSC_MAX_CTRL_NUM 10
#define GSC_SC_ALIGN_4 4
#define GSC_SC_ALIGN_2 2
#define DEFAULT_CSC_EQ 1
#define DEFAULT_CSC_RANGE 1
#define GSC_PARAMS (1 << 0)
#define GSC_SRC_FMT (1 << 1)
#define GSC_DST_FMT (1 << 2)
#define GSC_CTX_M2M (1 << 3)
#define GSC_CTX_STOP_REQ (1 << 6)
#define GSC_CTX_ABORT (1 << 7)
enum gsc_dev_flags {
/* for global */
ST_SUSPEND,
/* for m2m node */
ST_M2M_OPEN,
ST_M2M_RUN,
ST_M2M_PEND,
ST_M2M_SUSPENDED,
ST_M2M_SUSPENDING,
};
enum gsc_irq {
GSC_IRQ_DONE,
GSC_IRQ_OVERRUN
};
/**
* enum gsc_datapath - the path of data used for G-Scaler
* @GSC_CAMERA: from camera
* @GSC_DMA: from/to DMA
* @GSC_LOCAL: to local path
* @GSC_WRITEBACK: from FIMD
*/
enum gsc_datapath {
GSC_CAMERA = 0x1,
GSC_DMA,
GSC_MIXER,
GSC_FIMD,
GSC_WRITEBACK,
};
enum gsc_color_fmt {
GSC_RGB = 0x1,
GSC_YUV420 = 0x2,
GSC_YUV422 = 0x4,
GSC_YUV444 = 0x8,
};
enum gsc_yuv_fmt {
GSC_LSB_Y = 0x10,
GSC_LSB_C,
GSC_CBCR = 0x20,
GSC_CRCB,
};
#define fh_to_ctx(__fh) container_of(__fh, struct gsc_ctx, fh)
#define is_rgb(x) (!!((x) & 0x1))
#define is_yuv420(x) (!!((x) & 0x2))
#define is_yuv422(x) (!!((x) & 0x4))
#define gsc_m2m_active(dev) test_bit(ST_M2M_RUN, &(dev)->state)
#define gsc_m2m_pending(dev) test_bit(ST_M2M_PEND, &(dev)->state)
#define gsc_m2m_opened(dev) test_bit(ST_M2M_OPEN, &(dev)->state)
#define ctrl_to_ctx(__ctrl) \
container_of((__ctrl)->handler, struct gsc_ctx, ctrl_handler)
/**
* struct gsc_fmt - the driver's internal color format data
* @mbus_code: Media Bus pixel code, -1 if not applicable
* @name: format description
* @pixelformat: the fourcc code for this format, 0 if not applicable
* @yorder: Y/C order
* @corder: Chrominance order control
* @num_planes: number of physically non-contiguous data planes
* @nr_comp: number of physically contiguous data planes
* @depth: per plane driver's private 'number of bits per pixel'
* @flags: flags indicating which operation mode format applies to
*/
struct gsc_fmt {
u32 mbus_code;
char *name;
u32 pixelformat;
u32 color;
u32 yorder;
u32 corder;
u16 num_planes;
u16 num_comp;
u8 depth[VIDEO_MAX_PLANES];
u32 flags;
};
/**
* struct gsc_input_buf - the driver's video buffer
* @vb: videobuf2 buffer
* @list : linked list structure for buffer queue
* @idx : index of G-Scaler input buffer
*/
struct gsc_input_buf {
struct vb2_v4l2_buffer vb;
struct list_head list;
int idx;
};
/**
* struct gsc_addr - the G-Scaler physical address set
* @y: luminance plane address
* @cb: Cb plane address
* @cr: Cr plane address
*/
struct gsc_addr {
dma_addr_t y;
dma_addr_t cb;
dma_addr_t cr;
};
/* struct gsc_ctrls - the G-Scaler control set
* @rotate: rotation degree
* @hflip: horizontal flip
* @vflip: vertical flip
* @global_alpha: the alpha value of current frame
*/
struct gsc_ctrls {
struct v4l2_ctrl *rotate;
struct v4l2_ctrl *hflip;
struct v4l2_ctrl *vflip;
struct v4l2_ctrl *global_alpha;
};
/**
* struct gsc_scaler - the configuration data for G-Scaler inetrnal scaler
* @pre_shfactor: pre sclaer shift factor
* @pre_hratio: horizontal ratio of the prescaler
* @pre_vratio: vertical ratio of the prescaler
* @main_hratio: the main scaler's horizontal ratio
* @main_vratio: the main scaler's vertical ratio
*/
struct gsc_scaler {
u32 pre_shfactor;
u32 pre_hratio;
u32 pre_vratio;
u32 main_hratio;
u32 main_vratio;
};
struct gsc_dev;
struct gsc_ctx;
/**
* struct gsc_frame - source/target frame properties
* @f_width: SRC : SRCIMG_WIDTH, DST : OUTPUTDMA_WHOLE_IMG_WIDTH
* @f_height: SRC : SRCIMG_HEIGHT, DST : OUTPUTDMA_WHOLE_IMG_HEIGHT
* @crop: cropped(source)/scaled(destination) size
* @payload: image size in bytes (w x h x bpp)
* @addr: image frame buffer physical addresses
* @fmt: G-Scaler color format pointer
* @colorspace: value indicating v4l2_colorspace
* @alpha: frame's alpha value
*/
struct gsc_frame {
u32 f_width;
u32 f_height;
struct v4l2_rect crop;
unsigned long payload[VIDEO_MAX_PLANES];
struct gsc_addr addr;
const struct gsc_fmt *fmt;
u32 colorspace;
u8 alpha;
};
/**
* struct gsc_m2m_device - v4l2 memory-to-memory device data
* @vfd: the video device node for v4l2 m2m mode
* @m2m_dev: v4l2 memory-to-memory device data
* @ctx: hardware context data
* @refcnt: the reference counter
*/
struct gsc_m2m_device {
struct video_device *vfd;
struct v4l2_m2m_dev *m2m_dev;
struct gsc_ctx *ctx;
int refcnt;
};
/**
* struct gsc_pix_max - image pixel size limits in various IP configurations
*
* @org_scaler_bypass_w: max pixel width when the scaler is disabled
* @org_scaler_bypass_h: max pixel height when the scaler is disabled
* @org_scaler_input_w: max pixel width when the scaler is enabled
* @org_scaler_input_h: max pixel height when the scaler is enabled
* @real_rot_dis_w: max pixel src cropped height with the rotator is off
* @real_rot_dis_h: max pixel src croppped width with the rotator is off
* @real_rot_en_w: max pixel src cropped width with the rotator is on
* @real_rot_en_h: max pixel src cropped height with the rotator is on
* @target_rot_dis_w: max pixel dst scaled width with the rotator is off
* @target_rot_dis_h: max pixel dst scaled height with the rotator is off
* @target_rot_en_w: max pixel dst scaled width with the rotator is on
* @target_rot_en_h: max pixel dst scaled height with the rotator is on
*/
struct gsc_pix_max {
u16 org_scaler_bypass_w;
u16 org_scaler_bypass_h;
u16 org_scaler_input_w;
u16 org_scaler_input_h;
u16 real_rot_dis_w;
u16 real_rot_dis_h;
u16 real_rot_en_w;
u16 real_rot_en_h;
u16 target_rot_dis_w;
u16 target_rot_dis_h;
u16 target_rot_en_w;
u16 target_rot_en_h;
};
/**
* struct gsc_pix_min - image pixel size limits in various IP configurations
*
* @org_w: minimum source pixel width
* @org_h: minimum source pixel height
* @real_w: minimum input crop pixel width
* @real_h: minimum input crop pixel height
* @target_rot_dis_w: minimum output scaled pixel height when rotator is off
* @target_rot_dis_h: minimum output scaled pixel height when rotator is off
* @target_rot_en_w: minimum output scaled pixel height when rotator is on
* @target_rot_en_h: minimum output scaled pixel height when rotator is on
*/
struct gsc_pix_min {
u16 org_w;
u16 org_h;
u16 real_w;
u16 real_h;
u16 target_rot_dis_w;
u16 target_rot_dis_h;
u16 target_rot_en_w;
u16 target_rot_en_h;
};
struct gsc_pix_align {
u16 org_h;
u16 org_w;
u16 offset_h;
u16 real_w;
u16 real_h;
u16 target_w;
u16 target_h;
};
/**
* struct gsc_variant - G-Scaler variant information
*/
struct gsc_variant {
struct gsc_pix_max *pix_max;
struct gsc_pix_min *pix_min;
struct gsc_pix_align *pix_align;
u16 in_buf_cnt;
u16 out_buf_cnt;
u16 sc_up_max;
u16 sc_down_max;
u16 poly_sc_down_max;
u16 pre_sc_down_max;
u16 local_sc_down;
};
/**
* struct gsc_driverdata - per device type driver data for init time.
*
* @variant: the variant information for this driver.
* @lclk_frequency: G-Scaler clock frequency
* @num_entities: the number of g-scalers
*/
struct gsc_driverdata {
struct gsc_variant *variant[GSC_MAX_DEVS];
unsigned long lclk_frequency;
int num_entities;
};
/**
* struct gsc_dev - abstraction for G-Scaler entity
* @slock: the spinlock protecting this data structure
* @lock: the mutex protecting this data structure
* @pdev: pointer to the G-Scaler platform device
* @variant: the IP variant information
* @id: G-Scaler device index (0..GSC_MAX_DEVS)
* @clock: clocks required for G-Scaler operation
* @regs: the mapped hardware registers
* @irq_queue: interrupt handler waitqueue
* @m2m: memory-to-memory V4L2 device information
* @state: flags used to synchronize m2m and capture mode operation
* @alloc_ctx: videobuf2 memory allocator context
* @vdev: video device for G-Scaler instance
*/
struct gsc_dev {
spinlock_t slock;
struct mutex lock;
struct platform_device *pdev;
struct gsc_variant *variant;
u16 id;
struct clk *clock;
void __iomem *regs;
wait_queue_head_t irq_queue;
struct gsc_m2m_device m2m;
unsigned long state;
struct vb2_alloc_ctx *alloc_ctx;
struct video_device vdev;
struct v4l2_device v4l2_dev;
};
/**
* gsc_ctx - the device context data
* @s_frame: source frame properties
* @d_frame: destination frame properties
* @in_path: input mode (DMA or camera)
* @out_path: output mode (DMA or FIFO)
* @scaler: image scaler properties
* @flags: additional flags for image conversion
* @state: flags to keep track of user configuration
* @gsc_dev: the G-Scaler device this context applies to
* @m2m_ctx: memory-to-memory device context
* @fh: v4l2 file handle
* @ctrl_handler: v4l2 controls handler
* @gsc_ctrls G-Scaler control set
* @ctrls_rdy: true if the control handler is initialized
*/
struct gsc_ctx {
struct gsc_frame s_frame;
struct gsc_frame d_frame;
enum gsc_datapath in_path;
enum gsc_datapath out_path;
struct gsc_scaler scaler;
u32 flags;
u32 state;
int rotation;
unsigned int hflip:1;
unsigned int vflip:1;
struct gsc_dev *gsc_dev;
struct v4l2_m2m_ctx *m2m_ctx;
struct v4l2_fh fh;
struct v4l2_ctrl_handler ctrl_handler;
struct gsc_ctrls gsc_ctrls;
bool ctrls_rdy;
};
void gsc_set_prefbuf(struct gsc_dev *gsc, struct gsc_frame *frm);
int gsc_register_m2m_device(struct gsc_dev *gsc);
void gsc_unregister_m2m_device(struct gsc_dev *gsc);
void gsc_m2m_job_finish(struct gsc_ctx *ctx, int vb_state);
u32 get_plane_size(struct gsc_frame *fr, unsigned int plane);
const struct gsc_fmt *get_format(int index);
const struct gsc_fmt *find_fmt(u32 *pixelformat, u32 *mbus_code, u32 index);
int gsc_enum_fmt_mplane(struct v4l2_fmtdesc *f);
int gsc_try_fmt_mplane(struct gsc_ctx *ctx, struct v4l2_format *f);
void gsc_set_frame_size(struct gsc_frame *frame, int width, int height);
int gsc_g_fmt_mplane(struct gsc_ctx *ctx, struct v4l2_format *f);
void gsc_check_crop_change(u32 tmp_w, u32 tmp_h, u32 *w, u32 *h);
int gsc_g_crop(struct gsc_ctx *ctx, struct v4l2_crop *cr);
int gsc_try_crop(struct gsc_ctx *ctx, struct v4l2_crop *cr);
int gsc_cal_prescaler_ratio(struct gsc_variant *var, u32 src, u32 dst,
u32 *ratio);
void gsc_get_prescaler_shfactor(u32 hratio, u32 vratio, u32 *sh);
void gsc_check_src_scale_info(struct gsc_variant *var,
struct gsc_frame *s_frame,
u32 *wratio, u32 tx, u32 ty, u32 *hratio);
int gsc_check_scaler_ratio(struct gsc_variant *var, int sw, int sh, int dw,
int dh, int rot, int out_path);
int gsc_set_scaler_info(struct gsc_ctx *ctx);
int gsc_ctrls_create(struct gsc_ctx *ctx);
void gsc_ctrls_delete(struct gsc_ctx *ctx);
int gsc_prepare_addr(struct gsc_ctx *ctx, struct vb2_buffer *vb,
struct gsc_frame *frame, struct gsc_addr *addr);
static inline void gsc_ctx_state_lock_set(u32 state, struct gsc_ctx *ctx)
{
unsigned long flags;
spin_lock_irqsave(&ctx->gsc_dev->slock, flags);
ctx->state |= state;
spin_unlock_irqrestore(&ctx->gsc_dev->slock, flags);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
sungchun kang | sungchun kang | 49 | 100.00% | 1 | 100.00% |
| Total | 49 | 100.00% | 1 | 100.00% |
static inline void gsc_ctx_state_lock_clear(u32 state, struct gsc_ctx *ctx)
{
unsigned long flags;
spin_lock_irqsave(&ctx->gsc_dev->slock, flags);
ctx->state &= ~state;
spin_unlock_irqrestore(&ctx->gsc_dev->slock, flags);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
sungchun kang | sungchun kang | 50 | 100.00% | 1 | 100.00% |
| Total | 50 | 100.00% | 1 | 100.00% |
static inline int is_tiled(const struct gsc_fmt *fmt)
{
return fmt->pixelformat == V4L2_PIX_FMT_NV12MT_16X16;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
shaik ameer basha | shaik ameer basha | 20 | 100.00% | 1 | 100.00% |
| Total | 20 | 100.00% | 1 | 100.00% |
static inline void gsc_hw_enable_control(struct gsc_dev *dev, bool on)
{
u32 cfg = readl(dev->regs + GSC_ENABLE);
if (on)
cfg |= GSC_ENABLE_ON;
else
cfg &= ~GSC_ENABLE_ON;
writel(cfg, dev->regs + GSC_ENABLE);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
sungchun kang | sungchun kang | 52 | 100.00% | 1 | 100.00% |
| Total | 52 | 100.00% | 1 | 100.00% |
static inline int gsc_hw_get_irq_status(struct gsc_dev *dev)
{
u32 cfg = readl(dev->regs + GSC_IRQ);
if (cfg & GSC_IRQ_STATUS_OR_IRQ)
return GSC_IRQ_OVERRUN;
else
return GSC_IRQ_DONE;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
sungchun kang | sungchun kang | 37 | 100.00% | 1 | 100.00% |
| Total | 37 | 100.00% | 1 | 100.00% |
static inline void gsc_hw_clear_irq(struct gsc_dev *dev, int irq)
{
u32 cfg = readl(dev->regs + GSC_IRQ);
if (irq == GSC_IRQ_OVERRUN)
cfg |= GSC_IRQ_STATUS_OR_IRQ;
else if (irq == GSC_IRQ_DONE)
cfg |= GSC_IRQ_STATUS_FRM_DONE_IRQ;
writel(cfg, dev->regs + GSC_IRQ);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
sungchun kang | sungchun kang | 59 | 100.00% | 1 | 100.00% |
| Total | 59 | 100.00% | 1 | 100.00% |
static inline bool gsc_ctx_state_is_set(u32 mask, struct gsc_ctx *ctx)
{
unsigned long flags;
bool ret;
spin_lock_irqsave(&ctx->gsc_dev->slock, flags);
ret = (ctx->state & mask) == mask;
spin_unlock_irqrestore(&ctx->gsc_dev->slock, flags);
return ret;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
sungchun kang | sungchun kang | 61 | 100.00% | 1 | 100.00% |
| Total | 61 | 100.00% | 1 | 100.00% |
static inline struct gsc_frame *ctx_get_frame(struct gsc_ctx *ctx,
enum v4l2_buf_type type)
{
struct gsc_frame *frame;
if (V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE == type) {
frame = &ctx->s_frame;
} else if (V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE == type) {
frame = &ctx->d_frame;
} else {
pr_err("Wrong buffer/video queue type (%d)", type);
return ERR_PTR(-EINVAL);
}
return frame;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
sungchun kang | sungchun kang | 74 | 100.00% | 1 | 100.00% |
| Total | 74 | 100.00% | 1 | 100.00% |
void gsc_hw_set_sw_reset(struct gsc_dev *dev);
int gsc_wait_reset(struct gsc_dev *dev);
void gsc_hw_set_frm_done_irq_mask(struct gsc_dev *dev, bool mask);
void gsc_hw_set_gsc_irq_enable(struct gsc_dev *dev, bool mask);
void gsc_hw_set_input_buf_masking(struct gsc_dev *dev, u32 shift, bool enable);
void gsc_hw_set_output_buf_masking(struct gsc_dev *dev, u32 shift, bool enable);
void gsc_hw_set_input_addr(struct gsc_dev *dev, struct gsc_addr *addr,
int index);
void gsc_hw_set_output_addr(struct gsc_dev *dev, struct gsc_addr *addr,
int index);
void gsc_hw_set_input_path(struct gsc_ctx *ctx);
void gsc_hw_set_in_size(struct gsc_ctx *ctx);
void gsc_hw_set_in_image_rgb(struct gsc_ctx *ctx);
void gsc_hw_set_in_image_format(struct gsc_ctx *ctx);
void gsc_hw_set_output_path(struct gsc_ctx *ctx);
void gsc_hw_set_out_size(struct gsc_ctx *ctx);
void gsc_hw_set_out_image_rgb(struct gsc_ctx *ctx);
void gsc_hw_set_out_image_format(struct gsc_ctx *ctx);
void gsc_hw_set_prescaler(struct gsc_ctx *ctx);
void gsc_hw_set_mainscaler(struct gsc_ctx *ctx);
void gsc_hw_set_rotation(struct gsc_ctx *ctx);
void gsc_hw_set_global_alpha(struct gsc_ctx *ctx);
void gsc_hw_set_sfr_update(struct gsc_ctx *ctx);
#endif /* GSC_CORE_H_ */
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
sungchun kang | sungchun kang | 1649 | 98.15% | 1 | 14.29% |
shaik ameer basha | shaik ameer basha | 24 | 1.43% | 2 | 28.57% |
arun kumar k | arun kumar k | 4 | 0.24% | 1 | 14.29% |
junghak sung | junghak sung | 2 | 0.12% | 2 | 28.57% |
boris brezillon | boris brezillon | 1 | 0.06% | 1 | 14.29% |
| Total | 1680 | 100.00% | 7 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.