cregit-Linux how code gets into the kernel

Release 4.7 drivers/media/rc/img-ir/img-ir-sanyo.c

/*
 * ImgTec IR Decoder setup for Sanyo protocol.
 *
 * Copyright 2012-2014 Imagination Technologies Ltd.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2 of the License, or (at your
 * option) any later version.
 *
 * From ir-sanyo-decoder.c:
 *
 * This protocol uses the NEC protocol timings. However, data is formatted as:
 *      13 bits Custom Code
 *      13 bits NOT(Custom Code)
 *      8 bits Key data
 *      8 bits NOT(Key data)
 *
 * According with LIRC, this protocol is used on Sanyo, Aiwa and Chinon
 * Information for this protocol is available at the Sanyo LC7461 datasheet.
 */

#include "img-ir-hw.h"

/* Convert Sanyo data to a scancode */

static int img_ir_sanyo_scancode(int len, u64 raw, u64 enabled_protocols, struct img_ir_scancode_req *request) { unsigned int addr, addr_inv, data, data_inv; /* a repeat code has no data */ if (!len) return IMG_IR_REPEATCODE; if (len != 42) return -EINVAL; addr = (raw >> 0) & 0x1fff; addr_inv = (raw >> 13) & 0x1fff; data = (raw >> 26) & 0xff; data_inv = (raw >> 34) & 0xff; /* Validate data */ if ((data_inv ^ data) != 0xff) return -EINVAL; /* Validate address */ if ((addr_inv ^ addr) != 0x1fff) return -EINVAL; /* Normal Sanyo */ request->protocol = RC_TYPE_SANYO; request->scancode = addr << 8 | data; return IMG_IR_SCANCODE; }

Contributors

PersonTokensPropCommitsCommitProp
james hoganjames hogan12589.93%133.33%
sifan naeemsifan naeem96.47%133.33%
david hardemandavid hardeman53.60%133.33%
Total139100.00%3100.00%

/* Convert Sanyo scancode to Sanyo data filter */
static int img_ir_sanyo_filter(const struct rc_scancode_filter *in, struct img_ir_filter *out, u64 protocols) { unsigned int addr, addr_inv, data, data_inv; unsigned int addr_m, data_m; data = in->data & 0xff; data_m = in->mask & 0xff; data_inv = data ^ 0xff; if (in->data & 0xff700000) return -EINVAL; addr = (in->data >> 8) & 0x1fff; addr_m = (in->mask >> 8) & 0x1fff; addr_inv = addr ^ 0x1fff; out->data = (u64)data_inv << 34 | (u64)data << 26 | addr_inv << 13 | addr; out->mask = (u64)data_m << 34 | (u64)data_m << 26 | addr_m << 13 | addr_m; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
james hoganjames hogan151100.00%1100.00%
Total151100.00%1100.00%

/* Sanyo decoder */ struct img_ir_decoder img_ir_sanyo = { .type = RC_BIT_SANYO, .control = { .decoden = 1, .code_type = IMG_IR_CODETYPE_PULSEDIST, }, /* main timings */ .unit = 562500, /* 562.5 us */ .timings = { /* leader symbol */ .ldr = { .pulse = { 16 /* 9ms */ }, .space = { 8 /* 4.5ms */ }, }, /* 0 symbol */ .s00 = { .pulse = { 1 /* 562.5 us */ }, .space = { 1 /* 562.5 us */ }, }, /* 1 symbol */ .s01 = { .pulse = { 1 /* 562.5 us */ }, .space = { 3 /* 1687.5 us */ }, }, /* free time */ .ft = { .minlen = 42, .maxlen = 42, .ft_min = 10, /* 5.625 ms */ }, }, /* repeat codes */ .repeat = 108, /* 108 ms */ .rtimings = { /* leader symbol */ .ldr = { .space = { 4 /* 2.25 ms */ }, }, /* free time */ .ft = { .minlen = 0, /* repeat code has no data */ .maxlen = 0, }, }, /* scancode logic */ .scancode = img_ir_sanyo_scancode, .filter = img_ir_sanyo_filter, };

Overall Contributors

PersonTokensPropCommitsCommitProp
james hoganjames hogan46497.07%250.00%
sifan naeemsifan naeem91.88%125.00%
david hardemandavid hardeman51.05%125.00%
Total478100.00%4100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}