Release 4.7 drivers/media/usb/b2c2/flexcop-usb.h

/*
 * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
 * flexcop-usb.h - header file for the USB part
 * see flexcop.c for copyright information
 */
#ifndef __FLEXCOP_USB_H_INCLUDED__

#define __FLEXCOP_USB_H_INCLUDED__

#include <linux/usb.h>

/* transfer parameters */

#define B2C2_USB_FRAMES_PER_ISO 4

#define B2C2_USB_NUM_ISO_URB 4


#define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev, 0)

#define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev, 0)

#define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev, 0x81)


struct flexcop_usb {
	
struct usb_device *udev;
	
struct usb_interface *uintf;

	
u8 *iso_buffer;
	
int buffer_size;
	
dma_addr_t dma_addr;

	
struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
	
struct flexcop_device *fc_dev;

	
u8 tmp_buffer[1023+190];
	
int tmp_buffer_length;
};

#if 0
/* request types TODO What is its use?*/
typedef enum {

} flexcop_usb_request_type_t;
#endif

/* request */
typedef enum {
	
B2C2_USB_WRITE_V8_MEM = 0x04,
	
B2C2_USB_READ_V8_MEM  = 0x05,
	
B2C2_USB_READ_REG     = 0x08,
	
B2C2_USB_WRITE_REG    = 0x0A,
	
B2C2_USB_WRITEREGHI   = 0x0B,
	
B2C2_USB_FLASH_BLOCK  = 0x10,
	
B2C2_USB_I2C_REQUEST  = 0x11,
	
B2C2_USB_UTILITY      = 0x12,
} 
flexcop_usb_request_t;

/* function definition for I2C_REQUEST */
typedef enum {
	
USB_FUNC_I2C_WRITE       = 0x01,
	
USB_FUNC_I2C_MULTIWRITE  = 0x02,
	
USB_FUNC_I2C_READ        = 0x03,
	
USB_FUNC_I2C_REPEATWRITE = 0x04,
	
USB_FUNC_GET_DESCRIPTOR  = 0x05,
	
USB_FUNC_I2C_REPEATREAD  = 0x06,
	/* DKT 020208 - add this to support special case of DiSEqC */
	
USB_FUNC_I2C_CHECKWRITE  = 0x07,
	
USB_FUNC_I2C_CHECKRESULT = 0x08,
} 
flexcop_usb_i2c_function_t;

/* function definition for UTILITY request 0x12
 * DKT 020304 - new utility function */
typedef enum {
	
UTILITY_SET_FILTER          = 0x01,
	
UTILITY_DATA_ENABLE         = 0x02,
	
UTILITY_FLEX_MULTIWRITE     = 0x03,
	
UTILITY_SET_BUFFER_SIZE     = 0x04,
	
UTILITY_FLEX_OPERATOR       = 0x05,
	
UTILITY_FLEX_RESET300_START = 0x06,
	
UTILITY_FLEX_RESET300_STOP  = 0x07,
	
UTILITY_FLEX_RESET300       = 0x08,
	
UTILITY_SET_ISO_SIZE        = 0x09,
	
UTILITY_DATA_RESET          = 0x0A,
	
UTILITY_GET_DATA_STATUS     = 0x10,
	
UTILITY_GET_V8_REG          = 0x11,
	/* DKT 020326 - add function for v1.14 */
	
UTILITY_SRAM_WRITE          = 0x12,
	
UTILITY_SRAM_READ           = 0x13,
	
UTILITY_SRAM_TESTFILL       = 0x14,
	
UTILITY_SRAM_TESTSET        = 0x15,
	
UTILITY_SRAM_TESTVERIFY     = 0x16,
} 
flexcop_usb_utility_function_t;


#define B2C2_WAIT_FOR_OPERATION_RW (1*HZ)

#define B2C2_WAIT_FOR_OPERATION_RDW (3*HZ)

#define B2C2_WAIT_FOR_OPERATION_WDW (1*HZ)


#define B2C2_WAIT_FOR_OPERATION_V8READ (3*HZ)

#define B2C2_WAIT_FOR_OPERATION_V8WRITE (3*HZ)

#define B2C2_WAIT_FOR_OPERATION_V8FLASH (3*HZ)

typedef enum {
	
V8_MEMORY_PAGE_DVB_CI = 0x20,
	
V8_MEMORY_PAGE_DVB_DS = 0x40,
	
V8_MEMORY_PAGE_MULTI2 = 0x60,
	
V8_MEMORY_PAGE_FLASH  = 0x80
} 
flexcop_usb_mem_page_t;


#define V8_MEMORY_EXTENDED (1 << 15)

#define USB_MEM_READ_MAX   32

#define USB_MEM_WRITE_MAX   1

#define USB_FLASH_MAX       8

#define V8_MEMORY_PAGE_SIZE 0x8000 
/* 32K */

#define V8_MEMORY_PAGE_MASK 0x7FFF

#endif
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
johannes stezenbach
johannes stezenbach
298
95.82%
2
66.67%
uwe bugla
uwe bugla
13
4.18%
1
33.33%
Total
311
100.00%
3
100.00%
  
Directory: drivers/media/usb/b2c2

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.