cregit-Linux how code gets into the kernel

Release 4.7 drivers/media/usb/usbvision/usbvision.h

/*
 * USBVISION.H
 *  usbvision header file
 *
 * Copyright (c) 1999-2005 Joerg Heckenbach <joerg@heckenbach-aw.de>
 *                         Dwaine Garden <dwainegarden@rogers.com>
 *
 *
 * Report problems to v4l MailingList: linux-media@vger.kernel.org
 *
 * This module is part of usbvision driver project.
 * Updates to driver completed by Dwaine P. Garden
 * v4l2 conversion by Thierry Merle <thierry.merle@free.fr>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */


#ifndef __LINUX_USBVISION_H

#define __LINUX_USBVISION_H

#include <linux/list.h>
#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
#include <media/tuner.h>
#include <linux/videodev2.h>


#define USBVISION_DEBUG		
/* Turn on debug messages */


#define USBVISION_PWR_REG		0x00
	
#define USBVISION_SSPND_EN		(1 << 1)
	
#define USBVISION_RES2			(1 << 2)
	
#define USBVISION_PWR_VID		(1 << 5)
	
#define USBVISION_E2_EN			(1 << 7)

#define USBVISION_CONFIG_REG		0x01

#define USBVISION_ADRS_REG		0x02

#define USBVISION_ALTER_REG		0x03

#define USBVISION_FORCE_ALTER_REG	0x04

#define USBVISION_STATUS_REG		0x05

#define USBVISION_IOPIN_REG		0x06
	
#define USBVISION_IO_1			(1 << 0)
	
#define USBVISION_IO_2			(1 << 1)
	
#define USBVISION_AUDIO_IN		0
	
#define USBVISION_AUDIO_TV		1
	
#define USBVISION_AUDIO_RADIO		2
	
#define USBVISION_AUDIO_MUTE		3

#define USBVISION_SER_MODE		0x07
	
#define USBVISION_CLK_OUT		(1 << 0)
	
#define USBVISION_DAT_IO		(1 << 1)
	
#define USBVISION_SENS_OUT		(1 << 2)
	
#define USBVISION_SER_MODE_SOFT		(0 << 4)
	
#define USBVISION_SER_MODE_SIO		(1 << 4)

#define USBVISION_SER_ADRS		0x08

#define USBVISION_SER_CONT		0x09

#define USBVISION_SER_DAT1		0x0A

#define USBVISION_SER_DAT2		0x0B

#define USBVISION_SER_DAT3		0x0C

#define USBVISION_SER_DAT4		0x0D

#define USBVISION_EE_DATA		0x0E

#define USBVISION_EE_LSBAD		0x0F

#define USBVISION_EE_CONT		0x10

#define USBVISION_DRM_CONT			0x12
	
#define USBVISION_REF			(1 << 0)
	
#define USBVISION_RES_UR		(1 << 2)
	
#define USBVISION_RES_FDL		(1 << 3)
	
#define USBVISION_RES_VDW		(1 << 4)

#define USBVISION_DRM_PRM1		0x13

#define USBVISION_DRM_PRM2		0x14

#define USBVISION_DRM_PRM3		0x15

#define USBVISION_DRM_PRM4		0x16

#define USBVISION_DRM_PRM5		0x17

#define USBVISION_DRM_PRM6		0x18

#define USBVISION_DRM_PRM7		0x19

#define USBVISION_DRM_PRM8		0x1A

#define USBVISION_VIN_REG1		0x1B
	
#define USBVISION_8_422_SYNC		0x01
	
#define USBVISION_16_422_SYNC		0x02
	
#define USBVISION_VSNC_POL		(1 << 3)
	
#define USBVISION_HSNC_POL		(1 << 4)
	
#define USBVISION_FID_POL		(1 << 5)
	
#define USBVISION_HVALID_PO		(1 << 6)
	
#define USBVISION_VCLK_POL		(1 << 7)

#define USBVISION_VIN_REG2		0x1C
	
#define USBVISION_AUTO_FID		(1 << 0)
	
#define USBVISION_NONE_INTER		(1 << 1)
	
#define USBVISION_NOHVALID		(1 << 2)
	
#define USBVISION_UV_ID			(1 << 3)
	
#define USBVISION_FIX_2C		(1 << 4)
	
#define USBVISION_SEND_FID		(1 << 5)
	
#define USBVISION_KEEP_BLANK		(1 << 7)

#define USBVISION_LXSIZE_I		0x1D

#define USBVISION_MXSIZE_I		0x1E

#define USBVISION_LYSIZE_I		0x1F

#define USBVISION_MYSIZE_I		0x20

#define USBVISION_LX_OFFST		0x21

#define USBVISION_MX_OFFST		0x22

#define USBVISION_LY_OFFST		0x23

#define USBVISION_MY_OFFST		0x24

#define USBVISION_FRM_RATE		0x25

#define USBVISION_LXSIZE_O		0x26

#define USBVISION_MXSIZE_O		0x27

#define USBVISION_LYSIZE_O		0x28

#define USBVISION_MYSIZE_O		0x29

#define USBVISION_FILT_CONT		0x2A

#define USBVISION_VO_MODE		0x2B

#define USBVISION_INTRA_CYC		0x2C

#define USBVISION_STRIP_SZ		0x2D

#define USBVISION_FORCE_INTRA		0x2E

#define USBVISION_FORCE_UP		0x2F

#define USBVISION_BUF_THR		0x30

#define USBVISION_DVI_YUV		0x31

#define USBVISION_AUDIO_CONT		0x32

#define USBVISION_AUD_PK_LEN		0x33

#define USBVISION_BLK_PK_LEN		0x34

#define USBVISION_PCM_THR1		0x38

#define USBVISION_PCM_THR2		0x39

#define USBVISION_DIST_THR_L		0x3A

#define USBVISION_DIST_THR_H		0x3B

#define USBVISION_MAX_DIST_L		0x3C

#define USBVISION_MAX_DIST_H		0x3D

#define USBVISION_OP_CODE		0x33


#define MAX_BYTES_PER_PIXEL		4


#define MIN_FRAME_WIDTH			64

#define MAX_USB_WIDTH			320  
/* 384 */

#define MAX_FRAME_WIDTH			320  
/* 384 */			
/* streching sometimes causes crashes*/


#define MIN_FRAME_HEIGHT		48

#define MAX_USB_HEIGHT			240  
/* 288 */

#define MAX_FRAME_HEIGHT		240  
/* 288 */			
/* Streching sometimes causes crashes*/


#define MAX_FRAME_SIZE			(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT * MAX_BYTES_PER_PIXEL)

#define USBVISION_CLIPMASK_SIZE		(MAX_FRAME_WIDTH * MAX_FRAME_HEIGHT / 8) 
/* bytesize of clipmask */


#define USBVISION_URB_FRAMES		32


#define USBVISION_NUM_HEADERMARKER	20

#define USBVISION_NUMFRAMES		3  
/* Maximum number of frames an application can get */

#define USBVISION_NUMSBUF		2 
/* Dimensioning the USB S buffering */


#define USBVISION_POWEROFF_TIME		(3 * HZ)		
/* 3 seconds */



#define FRAMERATE_MIN	0

#define FRAMERATE_MAX	31

enum {
	
ISOC_MODE_YUV422 = 0x03,
	
ISOC_MODE_YUV420 = 0x14,
	
ISOC_MODE_COMPRESS = 0x60,
};

/* This macro restricts an int variable to an inclusive range */

#define RESTRICT_TO_RANGE(v, mi, ma) \
	{ if (((int)v) < (mi)) (v) = (mi); else if ((v) > (ma)) (v) = (ma); }

/*
 * We use macros to do YUV -> RGB conversion because this is
 * very important for speed and totally unimportant for size.
 *
 * YUV -> RGB Conversion
 * ---------------------
 *
 * B = 1.164*(Y-16)                 + 2.018*(V-128)
 * G = 1.164*(Y-16) - 0.813*(U-128) - 0.391*(V-128)
 * R = 1.164*(Y-16) + 1.596*(U-128)
 *
 * If you fancy integer arithmetics (as you should), hear this:
 *
 * 65536*B = 76284*(Y-16)                 + 132252*(V-128)
 * 65536*G = 76284*(Y-16) -  53281*(U-128) -  25625*(V-128)
 * 65536*R = 76284*(Y-16) + 104595*(U-128)
 *
 * Make sure the output values are within [0..255] range.
 */

#define LIMIT_RGB(x) (((x) < 0) ? 0 : (((x) > 255) ? 255 : (x)))

#define YUV_TO_RGB_BY_THE_BOOK(my, mu, mv, mr, mg, mb) { \
        int mm_y, mm_yc, mm_u, mm_v, mm_r, mm_g, mm_b; \
        mm_y = (my) - 16; \
        mm_u = (mu) - 128; \
        mm_v = (mv) - 128; \
        mm_yc = mm_y * 76284; \
        mm_b = (mm_yc + 132252 * mm_v) >> 16; \
        mm_g = (mm_yc - 53281 * mm_u - 25625 * mm_v) >> 16; \
        mm_r = (mm_yc + 104595 * mm_u) >> 16; \
        mb = LIMIT_RGB(mm_b); \
        mg = LIMIT_RGB(mm_g); \
        mr = LIMIT_RGB(mm_r); \
}

/*
 * This macro checks if usbvision is still operational. The 'usbvision'
 * pointer must be valid, usbvision->dev must be valid, we are not
 * removing the device and the device has not erred on us.
 */

#define USBVISION_IS_OPERATIONAL(udevice) (\
        (udevice != NULL) && \
        ((udevice)->dev != NULL) && \
        ((udevice)->last_error == 0) && \
        (!(udevice)->remove_pending))


#define I2C_USB_ADAP_MAX	16


#define USBVISION_NORMS (V4L2_STD_PAL | V4L2_STD_NTSC | V4L2_STD_SECAM | V4L2_STD_PAL_M)

/* ----------------------------------------------------------------- */
/* usbvision video structures                                        */
/* ----------------------------------------------------------------- */

enum scan_state {
	
scan_state_scanning,	/* Scanning for header */
	
scan_state_lines	/* Parsing lines */
};

/* Completion states of the data parser */

enum parse_state {
	
parse_state_continue,	/* Just parse next item */
	
parse_state_next_frame,	/* Frame done, send it to V4L */
	
parse_state_out,	/* Not enough data for frame */
	
parse_state_end_parse	/* End parsing */
};


enum frame_state {
	
frame_state_unused,	/* Unused (no MCAPTURE) */
	
frame_state_ready,	/* Ready to start grabbing */
	
frame_state_grabbing,	/* In the process of being grabbed into */
	
frame_state_done,	/* Finished grabbing, but not been synced yet */
	
frame_state_done_hold,	/* Are syncing or reading */
	
frame_state_error,	/* Something bad happened while processing */
};

/* stream states */

enum stream_state {
	
stream_off,		/* Driver streaming is completely OFF */
	
stream_idle,		/* Driver streaming is ready to be put ON by the application */
	
stream_interrupt,	/* Driver streaming must be interrupted */
	
stream_on,		/* Driver streaming is put ON by the application */
};


enum isoc_state {
	
isoc_state_in_frame,	/* Isoc packet is member of frame */
	
isoc_state_no_frame,	/* Isoc packet is not member of any frame */
};

struct usb_device;


struct usbvision_sbuf {
	
char *data;
	
struct urb *urb;
};


#define USBVISION_MAGIC_1			0x55

#define USBVISION_MAGIC_2			0xAA

#define USBVISION_HEADER_LENGTH			0x0c

#define USBVISION_SAA7111_ADDR			0x48

#define USBVISION_SAA7113_ADDR			0x4a

#define USBVISION_IIC_LRACK			0x20

#define USBVISION_IIC_LRNACK			0x30

#define USBVISION_FRAME_FORMAT_PARAM_INTRA	(1<<7)


struct usbvision_v4l2_format_st {
	
int		supported;
	
int		bytes_per_pixel;
	
int		depth;
	
int		format;
	
char		*desc;
};

#define USBVISION_SUPPORTED_PALETTES ARRAY_SIZE(usbvision_v4l2_format)


struct usbvision_frame_header {
	
unsigned char magic_1;				/* 0 magic */
	
unsigned char magic_2;				/* 1  magic */
	
unsigned char header_length;			/* 2 */
	
unsigned char frame_num;			/* 3 */
	
unsigned char frame_phase;			/* 4 */
	
unsigned char frame_latency;			/* 5 */
	
unsigned char data_format;			/* 6 */
	
unsigned char format_param;			/* 7 */
	
unsigned char frame_width_lo;			/* 8 */
	
unsigned char frame_width_hi;			/* 9 */
	
unsigned char frame_height_lo;			/* 10 */
	
unsigned char frame_height_hi;			/* 11 */
	
__u16 frame_width;				/* 8 - 9 after endian correction*/
	
__u16 frame_height;				/* 10 - 11 after endian correction*/
};


struct usbvision_frame {
	
char *data;					/* Frame buffer */
	
struct usbvision_frame_header isoc_header;	/* Header from stream */

	
int width;					/* Width application is expecting */
	
int height;					/* Height */
	
int index;					/* Frame index */
	
int frmwidth;					/* Width the frame actually is */
	
int frmheight;					/* Height */

	
volatile int grabstate;				/* State of grabbing */
	
int scanstate;					/* State of scanning */

	
struct list_head frame;

	
int curline;					/* Line of frame we're working on */

	
long scanlength;				/* uncompressed, raw data length of frame */
	
long bytes_read;				/* amount of scanlength that has been read from data */
	
struct usbvision_v4l2_format_st v4l2_format;	/* format the user needs*/
	
int v4l2_linesize;				/* bytes for one videoline*/
	
struct timeval timestamp;
	
int sequence;					/* How many video frames we send to user */
};


#define CODEC_SAA7113	7113

#define CODEC_SAA7111	7111

#define CODEC_WEBCAM	3000

#define BRIDGE_NT1003	1003

#define BRIDGE_NT1004	1004

#define BRIDGE_NT1005   1005


struct usbvision_device_data_st {
	
__u64 video_norm;
	
const char *model_string;
	
int interface; /* to handle special interface number like BELKIN and Hauppauge WinTV-USB II */
	
__u16 codec;
	
unsigned video_channels:3;
	
unsigned audio_channels:2;
	
unsigned radio:1;
	
unsigned vbi:1;
	
unsigned tuner:1;
	
unsigned vin_reg1_override:1;	/* Override default value with */
	
unsigned vin_reg2_override:1;   /* vin_reg1, vin_reg2, etc. */
	
unsigned dvi_yuv_override:1;
	
__u8 vin_reg1;
	
__u8 vin_reg2;
	
__u8 dvi_yuv;
	
__u8 tuner_type;
	
__s16 x_offset;
	
__s16 y_offset;
};

/* Declared on usbvision-cards.c */
extern struct usbvision_device_data_st usbvision_device_data[];
extern struct usb_device_id usbvision_table[];


struct usb_usbvision {
	
struct v4l2_device v4l2_dev;
	
struct v4l2_ctrl_handler hdl;
	
struct video_device vdev;					/* Video Device */
	
struct video_device rdev;					/* Radio Device */

	/* i2c Declaration Section*/
	
struct i2c_adapter i2c_adap;
	
int registered_i2c;

	
struct urb *ctrl_urb;
	
unsigned char ctrl_urb_buffer[8];
	
int ctrl_urb_busy;
	
struct usb_ctrlrequest ctrl_urb_setup;
	
wait_queue_head_t ctrl_urb_wq;					/* Processes waiting */

	/* configuration part */
	
int have_tuner;
	
int tuner_type;
	
int bridge_type;						/* NT1003, NT1004, NT1005 */
	
int radio;
	
int video_inputs;						/* # of inputs */
	
unsigned long radio_freq;
	
unsigned long tv_freq;
	
int audio_mute;
	
int audio_channel;
	
int isoc_mode;							/* format of video data for the usb isoc-transfer */
	
unsigned int nr;						/* Number of the device */

	/* Device structure */
	
struct usb_device *dev;
	/* usb transfer */
	
int num_alt;		/* Number of alternative settings */
	
unsigned int *alt_max_pkt_size;	/* array of max_packet_size */
	
unsigned char iface;						/* Video interface number */
	
unsigned char iface_alt;					/* Alt settings */
	
unsigned char vin_reg2_preset;
	
struct mutex v4l2_lock;
	
int power;							/* is the device powered on? */
	
int user;							/* user count for exclusive use */
	
int initialized;						/* Had we already sent init sequence? */
	
int dev_model;							/* What type of USBVISION device we got? */
	
enum stream_state streaming;					/* Are we streaming Isochronous? */
	
int last_error;							/* What calamity struck us? */
	
int curwidth;							/* width of the frame the device is currently set to*/
	
int curheight;							/* height of the frame the device is currently set to*/
	
int stretch_width;						/* stretch-factor for frame width (from usb to screen)*/
	
int stretch_height;						/* stretch-factor for frame height (from usb to screen)*/
	
char *fbuf;							/* Videodev buffer area for mmap*/
	
int max_frame_size;						/* Bytes in one video frame */
	
int fbuf_size;							/* Videodev buffer size */
	
spinlock_t queue_lock;						/* spinlock for protecting mods on inqueue and outqueue */
	

struct list_head inqueue, outqueue;                             /* queued frame list and ready to dequeue frame list */
	
wait_queue_head_t wait_frame;					/* Processes waiting */
	
wait_queue_head_t wait_stream;					/* Processes waiting */
	
struct usbvision_frame *cur_frame;				/* pointer to current frame, set by usbvision_find_header */
	
struct usbvision_frame frame[USBVISION_NUMFRAMES];		/* frame buffer */
	
int num_frames;							/* number of frames allocated */
	
struct usbvision_sbuf sbuf[USBVISION_NUMSBUF];			/* S buffering */
	
volatile int remove_pending;					/* If set then about to exit */

	/* Scratch space from the Isochronous Pipe.*/
	
unsigned char *scratch;
	
int scratch_read_ptr;
	
int scratch_write_ptr;
	
int scratch_headermarker[USBVISION_NUM_HEADERMARKER];
	
int scratch_headermarker_read_ptr;
	
int scratch_headermarker_write_ptr;
	
enum isoc_state isocstate;
	
struct usbvision_v4l2_format_st palette;

	
struct v4l2_capability vcap;					/* Video capabilities */
	
unsigned int ctl_input;						/* selected input */
	
v4l2_std_id tvnorm_id;						/* selected tv norm */
	
unsigned char video_endp;					/* 0x82 for USBVISION devices based */

	/* Decompression stuff: */
	
unsigned char *intra_frame_buffer;				/* Buffer for reference frame */
	
int block_pos;							/* for test only */
	
int request_intra;						/* 0 = normal; 1 = intra frame is requested; */
	
int last_isoc_frame_num;					/* check for lost isoc frames */
	
int isoc_packet_size;						/* need to calculate used_bandwidth */
	
int used_bandwidth;						/* used bandwidth 0-100%, need to set compr_level */
	
int compr_level;						/* How strong (100) or weak (0) is compression */
	
int last_compr_level;						/* How strong (100) or weak (0) was compression */
	
int usb_bandwidth;						/* Mbit/s */

	/* Statistics that can be overlayed on the screen */
	
unsigned long isoc_urb_count;			/* How many URBs we received so far */
	
unsigned long urb_length;			/* Length of last URB */
	
unsigned long isoc_data_count;			/* How many bytes we received */
	
unsigned long header_count;			/* How many frame headers we found */
	
unsigned long scratch_ovf_count;		/* How many times we overflowed scratch */
	
unsigned long isoc_skip_count;			/* How many empty ISO packets received */
	
unsigned long isoc_err_count;			/* How many bad ISO packets received */
	
unsigned long isoc_packet_count;		/* How many packets we totally got */
	
unsigned long time_in_irq;			/* How long do we need for interrupt */
	
int isoc_measure_bandwidth_count;
	
int frame_num;					/* How many video frames we send to user */
	
int max_strip_len;				/* How big is the biggest strip */
	
int comprblock_pos;
	
int strip_len_errors;				/* How many times was block_pos greater than strip_len */
	
int strip_magic_errors;
	
int strip_line_number_errors;
	
int compr_block_types[4];
};


static inline struct usb_usbvision *to_usbvision(struct v4l2_device *v4l2_dev) { return container_of(v4l2_dev, struct usb_usbvision, v4l2_dev); }

Contributors

PersonTokensPropCommitsCommitProp
hans verkuilhans verkuil25100.00%1100.00%
Total25100.00%1100.00%

#define call_all(usbvision, o, f, args...) \ v4l2_device_call_all(&usbvision->v4l2_dev, 0, o, f, ##args) /* --------------------------------------------------------------- */ /* defined in usbvision-i2c.c */ /* i2c-algo-usb declaration */ /* --------------------------------------------------------------- */ /* ----------------------------------------------------------------------- */ /* usbvision specific I2C functions */ /* ----------------------------------------------------------------------- */ int usbvision_i2c_register(struct usb_usbvision *usbvision); int usbvision_i2c_unregister(struct usb_usbvision *usbvision); /* defined in usbvision-core.c */ int usbvision_read_reg(struct usb_usbvision *usbvision, unsigned char reg); int usbvision_write_reg(struct usb_usbvision *usbvision, unsigned char reg, unsigned char value); int usbvision_frames_alloc(struct usb_usbvision *usbvision, int number_of_frames); void usbvision_frames_free(struct usb_usbvision *usbvision); int usbvision_scratch_alloc(struct usb_usbvision *usbvision); void usbvision_scratch_free(struct usb_usbvision *usbvision); int usbvision_decompress_alloc(struct usb_usbvision *usbvision); void usbvision_decompress_free(struct usb_usbvision *usbvision); int usbvision_setup(struct usb_usbvision *usbvision, int format); int usbvision_init_isoc(struct usb_usbvision *usbvision); int usbvision_restart_isoc(struct usb_usbvision *usbvision); void usbvision_stop_isoc(struct usb_usbvision *usbvision); int usbvision_set_alternate(struct usb_usbvision *dev); int usbvision_set_audio(struct usb_usbvision *usbvision, int audio_channel); int usbvision_audio_off(struct usb_usbvision *usbvision); int usbvision_begin_streaming(struct usb_usbvision *usbvision); void usbvision_empty_framequeues(struct usb_usbvision *dev); int usbvision_stream_interrupt(struct usb_usbvision *dev); int usbvision_muxsel(struct usb_usbvision *usbvision, int channel); int usbvision_set_input(struct usb_usbvision *usbvision); int usbvision_set_output(struct usb_usbvision *usbvision, int width, int height); int usbvision_power_off(struct usb_usbvision *usbvision); int usbvision_power_on(struct usb_usbvision *usbvision); #endif /* __LINUX_USBVISION_H */

Overall Contributors

PersonTokensPropCommitsCommitProp
mauro carvalho chehabmauro carvalho chehab104762.51%416.00%
thierry merlethierry merle37422.33%832.00%
hans verkuilhans verkuil19011.34%1040.00%
trent piephotrent piepho362.15%14.00%
ondrej zaryondrej zary241.43%14.00%
matthias kaehlckematthias kaehlcke40.24%14.00%
Total1675100.00%25100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}