#ifndef __CARD_DDCB_H__ #define __CARD_DDCB_H__ /** * IBM Accelerator Family 'GenWQE' * * (C) Copyright IBM Corp. 2013 * * Author: Frank Haverkamp <haver@linux.vnet.ibm.com> * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com> * Author: Michael Jung <mijung@gmx.net> * Author: Michael Ruettger <michael@ibmra.de> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include <linux/types.h> #include <asm/byteorder.h> #include "genwqe_driver.h" #include "card_base.h" /** * struct ddcb - Device Driver Control Block DDCB * @hsi: Hardware software interlock * @shi: Software hardware interlock. Hsi and shi are used to interlock * software and hardware activities. We are using a compare and * swap operation to ensure that there are no races when * activating new DDCBs on the queue, or when we need to * purge a DDCB from a running queue. * @acfunc: Accelerator function addresses a unit within the chip * @cmd: Command to work on * @cmdopts_16: Options for the command * @asiv: Input data * @asv: Output data * * The DDCB data format is big endian. Multiple consequtive DDBCs form * a DDCB queue. */ #define ASIV_LENGTH 104 /* Old specification without ATS field */ #define ASIV_LENGTH_ATS 96 /* New specification with ATS field */ #define ASV_LENGTH 64 struct ddcb { union { __be32 icrc_hsi_shi_32; /* iCRC, Hardware/SW interlock */ struct { __be16 icrc_16; u8 hsi; u8 shi; }; }; u8 pre; /* Preamble */ u8 xdir; /* Execution Directives */ __be16 seqnum_16; /* Sequence Number */ u8 acfunc; /* Accelerator Function.. */ u8 cmd; /* Command. */ __be16 cmdopts_16; /* Command Options */ u8 sur; /* Status Update Rate */ u8 psp; /* Protection Section Pointer */ __be16 rsvd_0e_16; /* Reserved invariant */ __be64 fwiv_64; /* Firmware Invariant. */ union { struct { __be64 ats_64; /* Address Translation Spec */ u8 asiv[ASIV_LENGTH_ATS]; /* New ASIV */ } n; u8 __asiv[ASIV_LENGTH]; /* obsolete */ }; u8 asv[ASV_LENGTH]; /* Appl Spec Variant */ __be16 rsvd_c0_16; /* Reserved Variant */ __be16 vcrc_16; /* Variant CRC */ __be32 rsvd_32; /* Reserved unprotected */ __be64 deque_ts_64; /* Deque Time Stamp. */ __be16 retc_16; /* Return Code */ __be16 attn_16; /* Attention/Extended Error Codes */ __be32 progress_32; /* Progress indicator. */ __be64 cmplt_ts_64; /* Completion Time Stamp. */ /* The following layout matches the new service layer format */ __be32 ibdc_32; /* Inbound Data Count (* 256) */ __be32 obdc_32; /* Outbound Data Count (* 256) */ __be64 rsvd_SLH_64; /* Reserved for hardware */ union { /* private data for driver */ u8 priv[8]; __be64 priv_64; }; __be64 disp_ts_64; /* Dispatch TimeStamp */ } __attribute__((__packed__)); /* CRC polynomials for DDCB */ #define CRC16_POLYNOMIAL 0x1021 /* * SHI: Software to Hardware Interlock * This 1 byte field is written by software to interlock the * movement of one queue entry to another with the hardware in the * chip. */ #define DDCB_SHI_INTR 0x04 /* Bit 2 */ #define DDCB_SHI_PURGE 0x02 /* Bit 1 */ #define DDCB_SHI_NEXT 0x01 /* Bit 0 */ /* * HSI: Hardware to Software interlock * This 1 byte field is written by hardware to interlock the movement * of one queue entry to another with the software in the chip. */ #define DDCB_HSI_COMPLETED 0x40 /* Bit 6 */ #define DDCB_HSI_FETCHED 0x04 /* Bit 2 */ /* * Accessing HSI/SHI is done 32-bit wide * Normally 16-bit access would work too, but on some platforms the * 16 compare and swap operation is not supported. Therefore * switching to 32-bit such that those platforms will work too. * * iCRC HSI/SHI */ #define DDCB_INTR_BE32 cpu_to_be32(0x00000004) #define DDCB_PURGE_BE32 cpu_to_be32(0x00000002) #define DDCB_NEXT_BE32 cpu_to_be32(0x00000001) #define DDCB_COMPLETED_BE32 cpu_to_be32(0x00004000) #define DDCB_FETCHED_BE32 cpu_to_be32(0x00000400) /* Definitions of DDCB presets */ #define DDCB_PRESET_PRE 0x80 #define ICRC_LENGTH(n) ((n) + 8 + 8 + 8) /* used ASIV + hdr fields */ #define VCRC_LENGTH(n) ((n)) /* used ASV */ /* * Genwqe Scatter Gather list * Each element has up to 8 entries. * The chaining element is element 0 cause of prefetching needs. */ /* * 0b0110 Chained descriptor. The descriptor is describing the next * descriptor list. */ #define SG_CHAINED (0x6) /* * 0b0010 First entry of a descriptor list. Start from a Buffer-Empty * condition. */ #define SG_DATA (0x2) /* * 0b0000 Early terminator. This is the last entry on the list * irregardless of the length indicated. */ #define SG_END_LIST (0x0) /** * struct sglist - Scatter gather list * @target_addr: Either a dma addr of memory to work on or a * dma addr or a subsequent sglist block. * @len: Length of the data block. * @flags: See above. * * Depending on the command the GenWQE card can use a scatter gather * list to describe the memory it works on. Always 8 sg_entry's form * a block. */ struct sg_entry { __be64 target_addr; __be32 len; __be32 flags; }; #endif /* __CARD_DDCB_H__ */Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp | |
| frank haverkamp | frank haverkamp | 311 | 100.00% | 2 | 100.00% |
| Total | 311 | 100.00% | 2 | 100.00% |