cregit-Linux how code gets into the kernel

Release 4.7 drivers/misc/mei/hw.h

Directory: drivers/misc/mei
/*
 *
 * Intel Management Engine Interface (Intel MEI) Linux driver
 * Copyright (c) 2003-2012, Intel Corporation.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms and conditions of the GNU General Public License,
 * version 2, as published by the Free Software Foundation.
 *
 * This program is distributed in the hope it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
 * more details.
 *
 */

#ifndef _MEI_HW_TYPES_H_

#define _MEI_HW_TYPES_H_

#include <linux/uuid.h>

/*
 * Timeouts in Seconds
 */

#define MEI_HW_READY_TIMEOUT        2  
/* Timeout on ready message */

#define MEI_CONNECT_TIMEOUT         3  
/* HPS: at least 2 seconds */


#define MEI_CL_CONNECT_TIMEOUT     15  
/* HPS: Client Connect Timeout */

#define MEI_CLIENTS_INIT_TIMEOUT   15  
/* HPS: Clients Enumeration Timeout */


#define MEI_IAMTHIF_STALL_TIMER    12  
/* HPS */


#define MEI_PGI_TIMEOUT             1  
/* PG Isolation time response 1 sec */

#define MEI_D0I3_TIMEOUT            5  
/* D0i3 set/unset max response time */

#define MEI_HBM_TIMEOUT             1  
/* 1 second */

/*
 * MEI Version
 */

#define HBM_MINOR_VERSION                   0

#define HBM_MAJOR_VERSION                   2

/*
 * MEI version with PGI support
 */

#define HBM_MINOR_VERSION_PGI               1

#define HBM_MAJOR_VERSION_PGI               1

/*
 * MEI version with Dynamic clients support
 */

#define HBM_MINOR_VERSION_DC               0

#define HBM_MAJOR_VERSION_DC               2

/*
 * MEI version with immediate reply to enum request support
 */

#define HBM_MINOR_VERSION_IE               0

#define HBM_MAJOR_VERSION_IE               2

/*
 * MEI version with disconnect on connection timeout support
 */

#define HBM_MINOR_VERSION_DOT              0

#define HBM_MAJOR_VERSION_DOT              2

/*
 * MEI version with notifcation support
 */

#define HBM_MINOR_VERSION_EV               0

#define HBM_MAJOR_VERSION_EV               2

/*
 * MEI version with fixed address client support
 */

#define HBM_MINOR_VERSION_FA               0

#define HBM_MAJOR_VERSION_FA               2

/* Host bus message command opcode */

#define MEI_HBM_CMD_OP_MSK                  0x7f
/* Host bus message command RESPONSE */

#define MEI_HBM_CMD_RES_MSK                 0x80

/*
 * MEI Bus Message Command IDs
 */

#define HOST_START_REQ_CMD                  0x01

#define HOST_START_RES_CMD                  0x81


#define HOST_STOP_REQ_CMD                   0x02

#define HOST_STOP_RES_CMD                   0x82


#define ME_STOP_REQ_CMD                     0x03


#define HOST_ENUM_REQ_CMD                   0x04

#define HOST_ENUM_RES_CMD                   0x84


#define HOST_CLIENT_PROPERTIES_REQ_CMD      0x05

#define HOST_CLIENT_PROPERTIES_RES_CMD      0x85


#define CLIENT_CONNECT_REQ_CMD              0x06

#define CLIENT_CONNECT_RES_CMD              0x86


#define CLIENT_DISCONNECT_REQ_CMD           0x07

#define CLIENT_DISCONNECT_RES_CMD           0x87


#define MEI_FLOW_CONTROL_CMD                0x08


#define MEI_PG_ISOLATION_ENTRY_REQ_CMD      0x0a

#define MEI_PG_ISOLATION_ENTRY_RES_CMD      0x8a

#define MEI_PG_ISOLATION_EXIT_REQ_CMD       0x0b

#define MEI_PG_ISOLATION_EXIT_RES_CMD       0x8b


#define MEI_HBM_ADD_CLIENT_REQ_CMD          0x0f

#define MEI_HBM_ADD_CLIENT_RES_CMD          0x8f


#define MEI_HBM_NOTIFY_REQ_CMD              0x10

#define MEI_HBM_NOTIFY_RES_CMD              0x90

#define MEI_HBM_NOTIFICATION_CMD            0x11

/*
 * MEI Stop Reason
 * used by hbm_host_stop_request.reason
 */

enum mei_stop_reason_types {
	
DRIVER_STOP_REQUEST = 0x00,
	
DEVICE_D1_ENTRY = 0x01,
	
DEVICE_D2_ENTRY = 0x02,
	
DEVICE_D3_ENTRY = 0x03,
	
SYSTEM_S1_ENTRY = 0x04,
	
SYSTEM_S2_ENTRY = 0x05,
	
SYSTEM_S3_ENTRY = 0x06,
	
SYSTEM_S4_ENTRY = 0x07,
	
SYSTEM_S5_ENTRY = 0x08
};


/**
 * enum mei_hbm_status  - mei host bus messages return values
 *
 * @MEI_HBMS_SUCCESS           : status success
 * @MEI_HBMS_CLIENT_NOT_FOUND  : client not found
 * @MEI_HBMS_ALREADY_EXISTS    : connection already established
 * @MEI_HBMS_REJECTED          : connection is rejected
 * @MEI_HBMS_INVALID_PARAMETER : invalid parameter
 * @MEI_HBMS_NOT_ALLOWED       : operation not allowed
 * @MEI_HBMS_ALREADY_STARTED   : system is already started
 * @MEI_HBMS_NOT_STARTED       : system not started
 *
 * @MEI_HBMS_MAX               : sentinel
 */

enum mei_hbm_status {
	
MEI_HBMS_SUCCESS           = 0,
	
MEI_HBMS_CLIENT_NOT_FOUND  = 1,
	
MEI_HBMS_ALREADY_EXISTS    = 2,
	
MEI_HBMS_REJECTED          = 3,
	
MEI_HBMS_INVALID_PARAMETER = 4,
	
MEI_HBMS_NOT_ALLOWED       = 5,
	
MEI_HBMS_ALREADY_STARTED   = 6,
	
MEI_HBMS_NOT_STARTED       = 7,

	
MEI_HBMS_MAX
};


/*
 * Client Connect Status
 * used by hbm_client_connect_response.status
 */

enum mei_cl_connect_status {
	
MEI_CL_CONN_SUCCESS          = MEI_HBMS_SUCCESS,
	
MEI_CL_CONN_NOT_FOUND        = MEI_HBMS_CLIENT_NOT_FOUND,
	
MEI_CL_CONN_ALREADY_STARTED  = MEI_HBMS_ALREADY_EXISTS,
	
MEI_CL_CONN_OUT_OF_RESOURCES = MEI_HBMS_REJECTED,
	
MEI_CL_CONN_MESSAGE_SMALL    = MEI_HBMS_INVALID_PARAMETER,
	
MEI_CL_CONN_NOT_ALLOWED      = MEI_HBMS_NOT_ALLOWED,
};

/*
 * Client Disconnect Status
 */

enum  mei_cl_disconnect_status {
	
MEI_CL_DISCONN_SUCCESS = MEI_HBMS_SUCCESS
};

/*
 *  MEI BUS Interface Section
 */

struct mei_msg_hdr {
	
u32 me_addr:8;
	
u32 host_addr:8;
	
u32 length:9;
	
u32 reserved:5;
	
u32 internal:1;
	
u32 msg_complete:1;
} 
__packed;



struct mei_bus_message {
	
u8 hbm_cmd;
	
u8 data[0];
} 
__packed;

/**
 * struct hbm_cl_cmd - client specific host bus command
 *      CONNECT, DISCONNECT, and FlOW CONTROL
 *
 * @hbm_cmd: bus message command header
 * @me_addr: address of the client in ME
 * @host_addr: address of the client in the driver
 * @data: generic data
 */

struct mei_hbm_cl_cmd {
	
u8 hbm_cmd;
	
u8 me_addr;
	
u8 host_addr;
	
u8 data;
};


struct hbm_version {
	
u8 minor_version;
	
u8 major_version;
} 
__packed;


struct hbm_host_version_request {
	
u8 hbm_cmd;
	
u8 reserved;
	
struct hbm_version host_version;
} 
__packed;


struct hbm_host_version_response {
	
u8 hbm_cmd;
	
u8 host_version_supported;
	
struct hbm_version me_max_version;
} 
__packed;


struct hbm_host_stop_request {
	
u8 hbm_cmd;
	
u8 reason;
	
u8 reserved[2];
} 
__packed;


struct hbm_host_stop_response {
	
u8 hbm_cmd;
	
u8 reserved[3];
} 
__packed;


struct hbm_me_stop_request {
	
u8 hbm_cmd;
	
u8 reason;
	
u8 reserved[2];
} 
__packed;

/**
 * enum hbm_host_enum_flags - enumeration request flags (HBM version >= 2.0)
 *
 * @MEI_HBM_ENUM_F_ALLOW_ADD: allow dynamic clients add
 * @MEI_HBM_ENUM_F_IMMEDIATE_ENUM: allow FW to send answer immediately
 */

enum hbm_host_enum_flags {
	
MEI_HBM_ENUM_F_ALLOW_ADD = BIT(0),
	
MEI_HBM_ENUM_F_IMMEDIATE_ENUM = BIT(1),
};

/**
 * struct hbm_host_enum_request - enumeration request from host to fw
 *
 * @hbm_cmd : bus message command header
 * @flags   : request flags
 * @reserved: reserved
 */

struct hbm_host_enum_request {
	
u8 hbm_cmd;
	
u8 flags;
	
u8 reserved[2];
} 
__packed;


struct hbm_host_enum_response {
	
u8 hbm_cmd;
	
u8 reserved[3];
	
u8 valid_addresses[32];
} 
__packed;


struct mei_client_properties {
	
uuid_le protocol_name;
	
u8 protocol_version;
	
u8 max_number_of_connections;
	
u8 fixed_address;
	
u8 single_recv_buf;
	
u32 max_msg_length;
} 
__packed;


struct hbm_props_request {
	
u8 hbm_cmd;
	
u8 me_addr;
	
u8 reserved[2];
} 
__packed;


struct hbm_props_response {
	
u8 hbm_cmd;
	
u8 me_addr;
	
u8 status;
	
u8 reserved[1];
	
struct mei_client_properties client_properties;
} 
__packed;

/**
 * struct hbm_add_client_request - request to add a client
 *     might be sent by fw after enumeration has already completed
 *
 * @hbm_cmd: bus message command header
 * @me_addr: address of the client in ME
 * @reserved: reserved
 * @client_properties: client properties
 */

struct hbm_add_client_request {
	
u8 hbm_cmd;
	
u8 me_addr;
	
u8 reserved[2];
	
struct mei_client_properties client_properties;
} 
__packed;

/**
 * struct hbm_add_client_response - response to add a client
 *     sent by the host to report client addition status to fw
 *
 * @hbm_cmd: bus message command header
 * @me_addr: address of the client in ME
 * @status: if HBMS_SUCCESS then the client can now accept connections.
 * @reserved: reserved
 */

struct hbm_add_client_response {
	
u8 hbm_cmd;
	
u8 me_addr;
	
u8 status;
	
u8 reserved[1];
} 
__packed;

/**
 * struct hbm_power_gate - power gate request/response
 *
 * @hbm_cmd: bus message command header
 * @reserved: reserved
 */

struct hbm_power_gate {
	
u8 hbm_cmd;
	
u8 reserved[3];
} 
__packed;

/**
 * struct hbm_client_connect_request - connect/disconnect request
 *
 * @hbm_cmd: bus message command header
 * @me_addr: address of the client in ME
 * @host_addr: address of the client in the driver
 * @reserved: reserved
 */

struct hbm_client_connect_request {
	
u8 hbm_cmd;
	
u8 me_addr;
	
u8 host_addr;
	
u8 reserved;
} 
__packed;

/**
 * struct hbm_client_connect_response - connect/disconnect response
 *
 * @hbm_cmd: bus message command header
 * @me_addr: address of the client in ME
 * @host_addr: address of the client in the driver
 * @status: status of the request
 */

struct hbm_client_connect_response {
	
u8 hbm_cmd;
	
u8 me_addr;
	
u8 host_addr;
	
u8 status;
} 
__packed;



#define MEI_FC_MESSAGE_RESERVED_LENGTH           5


struct hbm_flow_control {
	
u8 hbm_cmd;
	
u8 me_addr;
	
u8 host_addr;
	
u8 reserved[MEI_FC_MESSAGE_RESERVED_LENGTH];
} 
__packed;


#define MEI_HBM_NOTIFICATION_START 1

#define MEI_HBM_NOTIFICATION_STOP  0
/**
 * struct hbm_notification_request - start/stop notification request
 *
 * @hbm_cmd: bus message command header
 * @me_addr: address of the client in ME
 * @host_addr: address of the client in the driver
 * @start:  start = 1 or stop = 0 asynchronous notifications
 */

struct hbm_notification_request {
	
u8 hbm_cmd;
	
u8 me_addr;
	
u8 host_addr;
	
u8 start;
} 
__packed;

/**
 * struct hbm_notification_response - start/stop notification response
 *
 * @hbm_cmd: bus message command header
 * @me_addr: address of the client in ME
 * @host_addr: - address of the client in the driver
 * @status: (mei_hbm_status) response status for the request
 *  - MEI_HBMS_SUCCESS: successful stop/start
 *  - MEI_HBMS_CLIENT_NOT_FOUND: if the connection could not be found.
 *  - MEI_HBMS_ALREADY_STARTED: for start requests for a previously
 *                         started notification.
 *  - MEI_HBMS_NOT_STARTED: for stop request for a connected client for whom
 *                         asynchronous notifications are currently disabled.
 *
 * @start:  start = 1 or stop = 0 asynchronous notifications
 * @reserved: reserved
 */

struct hbm_notification_response {
	
u8 hbm_cmd;
	
u8 me_addr;
	
u8 host_addr;
	
u8 status;
	
u8 start;
	
u8 reserved[3];
} 
__packed;

/**
 * struct hbm_notification - notification event
 *
 * @hbm_cmd: bus message command header
 * @me_addr:  address of the client in ME
 * @host_addr:  address of the client in the driver
 * @reserved: reserved for alignment
 */

struct hbm_notification {
	
u8 hbm_cmd;
	
u8 me_addr;
	
u8 host_addr;
	
u8 reserved[1];
} 
__packed;

#endif

Overall Contributors

PersonTokensPropCommitsCommitProp
oren weiloren weil43452.35%14.00%
tomas winklertomas winkler32539.20%1664.00%
alexander usyskinalexander usyskin708.44%832.00%
Total829100.00%25100.00%
Directory: drivers/misc/mei
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}