cregit-Linux how code gets into the kernel

Release 4.7 drivers/mmc/host/dw_mmc-k3.c

Directory: drivers/mmc/host
/*
 * Copyright (c) 2013 Linaro Ltd.
 * Copyright (c) 2013 Hisilicon Limited.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#include <linux/clk.h>
#include <linux/mfd/syscon.h>
#include <linux/mmc/host.h>
#include <linux/mmc/dw_mmc.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>

#include "dw_mmc.h"
#include "dw_mmc-pltfm.h"

/*
 * hi6220 sd only support io voltage 1.8v and 3v
 * Also need config AO_SCTRL_SEL18 accordingly
 */

#define AO_SCTRL_SEL18		BIT(10)

#define AO_SCTRL_CTRL3		0x40C


struct k3_priv {
	
struct regmap	*reg;
};


static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios) { int ret; ret = clk_set_rate(host->ciu_clk, ios->clock); if (ret) dev_warn(host->dev, "failed to set rate %uHz\n", ios->clock); host->bus_hz = clk_get_rate(host->ciu_clk); }

Contributors

PersonTokensPropCommitsCommitProp
zhangfei gaozhangfei gao60100.00%2100.00%
Total60100.00%2100.00%

static const struct dw_mci_drv_data k3_drv_data = { .set_ios = dw_mci_k3_set_ios, };
static int dw_mci_hi6220_parse_dt(struct dw_mci *host) { struct k3_priv *priv; priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; priv->reg = syscon_regmap_lookup_by_phandle(host->dev->of_node, "hisilicon,peripheral-syscon"); if (IS_ERR(priv->reg)) priv->reg = NULL; host->priv = priv; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
zhangfei gaozhangfei gao81100.00%1100.00%
Total81100.00%1100.00%


static int dw_mci_hi6220_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios) { struct dw_mci_slot *slot = mmc_priv(mmc); struct k3_priv *priv; struct dw_mci *host; int min_uv, max_uv; int ret; host = slot->host; priv = host->priv; if (!priv || !priv->reg) return 0; if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) { ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3, AO_SCTRL_SEL18, 0); min_uv = 3000000; max_uv = 3000000; } else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) { ret = regmap_update_bits(priv->reg, AO_SCTRL_CTRL3, AO_SCTRL_SEL18, AO_SCTRL_SEL18); min_uv = 1800000; max_uv = 1800000; } else { dev_dbg(host->dev, "voltage not supported\n"); return -EINVAL; } if (ret) { dev_dbg(host->dev, "switch voltage failed\n"); return ret; } if (IS_ERR_OR_NULL(mmc->supply.vqmmc)) return 0; ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv); if (ret) { dev_dbg(host->dev, "Regulator set error %d: %d - %d\n", ret, min_uv, max_uv); return ret; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
zhangfei gaozhangfei gao226100.00%1100.00%
Total226100.00%1100.00%


static void dw_mci_hi6220_set_ios(struct dw_mci *host, struct mmc_ios *ios) { int ret; unsigned int clock; clock = (ios->clock <= 25000000) ? 25000000 : ios->clock; ret = clk_set_rate(host->biu_clk, clock); if (ret) dev_warn(host->dev, "failed to set rate %uHz\n", clock); host->bus_hz = clk_get_rate(host->biu_clk); }

Contributors

PersonTokensPropCommitsCommitProp
zhangfei gaozhangfei gao76100.00%1100.00%
Total76100.00%1100.00%

static const struct dw_mci_drv_data hi6220_data = { .switch_voltage = dw_mci_hi6220_switch_voltage, .set_ios = dw_mci_hi6220_set_ios, .parse_dt = dw_mci_hi6220_parse_dt, }; static const struct of_device_id dw_mci_k3_match[] = { { .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, }, { .compatible = "hisilicon,hi6220-dw-mshc", .data = &hi6220_data, }, {}, }; MODULE_DEVICE_TABLE(of, dw_mci_k3_match);
static int dw_mci_k3_probe(struct platform_device *pdev) { const struct dw_mci_drv_data *drv_data; const struct of_device_id *match; match = of_match_node(dw_mci_k3_match, pdev->dev.of_node); drv_data = match->data; return dw_mci_pltfm_register(pdev, drv_data); }

Contributors

PersonTokensPropCommitsCommitProp
zhangfei gaozhangfei gao50100.00%1100.00%
Total50100.00%1100.00%

#ifdef CONFIG_PM_SLEEP
static int dw_mci_k3_suspend(struct device *dev) { struct dw_mci *host = dev_get_drvdata(dev); int ret; ret = dw_mci_suspend(host); if (!ret) clk_disable_unprepare(host->ciu_clk); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
zhangfei gaozhangfei gao46100.00%1100.00%
Total46100.00%1100.00%


static int dw_mci_k3_resume(struct device *dev) { struct dw_mci *host = dev_get_drvdata(dev); int ret; ret = clk_prepare_enable(host->ciu_clk); if (ret) { dev_err(host->dev, "failed to enable ciu clock\n"); return ret; } return dw_mci_resume(host); }

Contributors

PersonTokensPropCommitsCommitProp
zhangfei gaozhangfei gao57100.00%1100.00%
Total57100.00%1100.00%

#endif /* CONFIG_PM_SLEEP */ static SIMPLE_DEV_PM_OPS(dw_mci_k3_pmops, dw_mci_k3_suspend, dw_mci_k3_resume); static struct platform_driver dw_mci_k3_pltfm_driver = { .probe = dw_mci_k3_probe, .remove = dw_mci_pltfm_remove, .driver = { .name = "dwmmc_k3", .of_match_table = dw_mci_k3_match, .pm = &dw_mci_k3_pmops, }, }; module_platform_driver(dw_mci_k3_pltfm_driver); MODULE_DESCRIPTION("K3 Specific DW-MSHC Driver Extension"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:dwmmc_k3");

Overall Contributors

PersonTokensPropCommitsCommitProp
zhangfei gaozhangfei gao79699.13%466.67%
felipe balbifelipe balbi60.75%116.67%
wei yongjunwei yongjun10.12%116.67%
Total803100.00%6100.00%
Directory: drivers/mmc/host
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}