#ifndef __HD64570_H #define __HD64570_H /* SCA HD64570 register definitions - all addresses for mode 0 (8086 MPU) and 1 (64180 MPU). For modes 2 and 3, XOR the address with 0x01. Source: HD64570 SCA User's Manual */ /* SCA Control Registers */ #define LPR 0x00 /* Low Power */ /* Wait controller registers */ #define PABR0 0x02 /* Physical Address Boundary 0 */ #define PABR1 0x03 /* Physical Address Boundary 1 */ #define WCRL 0x04 /* Wait Control L */ #define WCRM 0x05 /* Wait Control M */ #define WCRH 0x06 /* Wait Control H */ #define PCR 0x08 /* DMA Priority Control */ #define DMER 0x09 /* DMA Master Enable */ /* Interrupt registers */ #define ISR0 0x10 /* Interrupt Status 0 */ #define ISR1 0x11 /* Interrupt Status 1 */ #define ISR2 0x12 /* Interrupt Status 2 */ #define IER0 0x14 /* Interrupt Enable 0 */ #define IER1 0x15 /* Interrupt Enable 1 */ #define IER2 0x16 /* Interrupt Enable 2 */ #define ITCR 0x18 /* Interrupt Control */ #define IVR 0x1A /* Interrupt Vector */ #define IMVR 0x1C /* Interrupt Modified Vector */ /* MSCI channel (port) 0 registers - offset 0x20 MSCI channel (port) 1 registers - offset 0x40 */ #define MSCI0_OFFSET 0x20 #define MSCI1_OFFSET 0x40 #define TRBL 0x00 /* TX/RX buffer L */ #define TRBH 0x01 /* TX/RX buffer H */ #define ST0 0x02 /* Status 0 */ #define ST1 0x03 /* Status 1 */ #define ST2 0x04 /* Status 2 */ #define ST3 0x05 /* Status 3 */ #define FST 0x06 /* Frame Status */ #define IE0 0x08 /* Interrupt Enable 0 */ #define IE1 0x09 /* Interrupt Enable 1 */ #define IE2 0x0A /* Interrupt Enable 2 */ #define FIE 0x0B /* Frame Interrupt Enable */ #define CMD 0x0C /* Command */ #define MD0 0x0E /* Mode 0 */ #define MD1 0x0F /* Mode 1 */ #define MD2 0x10 /* Mode 2 */ #define CTL 0x11 /* Control */ #define SA0 0x12 /* Sync/Address 0 */ #define SA1 0x13 /* Sync/Address 1 */ #define IDL 0x14 /* Idle Pattern */ #define TMC 0x15 /* Time Constant */ #define RXS 0x16 /* RX Clock Source */ #define TXS 0x17 /* TX Clock Source */ #define TRC0 0x18 /* TX Ready Control 0 */ #define TRC1 0x19 /* TX Ready Control 1 */ #define RRC 0x1A /* RX Ready Control */ #define CST0 0x1C /* Current Status 0 */ #define CST1 0x1D /* Current Status 1 */ /* Timer channel 0 (port 0 RX) registers - offset 0x60 Timer channel 1 (port 0 TX) registers - offset 0x68 Timer channel 2 (port 1 RX) registers - offset 0x70 Timer channel 3 (port 1 TX) registers - offset 0x78 */ #define TIMER0RX_OFFSET 0x60 #define TIMER0TX_OFFSET 0x68 #define TIMER1RX_OFFSET 0x70 #define TIMER1TX_OFFSET 0x78 #define TCNTL 0x00 /* Up-counter L */ #define TCNTH 0x01 /* Up-counter H */ #define TCONRL 0x02 /* Constant L */ #define TCONRH 0x03 /* Constant H */ #define TCSR 0x04 /* Control/Status */ #define TEPR 0x05 /* Expand Prescale */ /* DMA channel 0 (port 0 RX) registers - offset 0x80 DMA channel 1 (port 0 TX) registers - offset 0xA0 DMA channel 2 (port 1 RX) registers - offset 0xC0 DMA channel 3 (port 1 TX) registers - offset 0xE0 */ #define DMAC0RX_OFFSET 0x80 #define DMAC0TX_OFFSET 0xA0 #define DMAC1RX_OFFSET 0xC0 #define DMAC1TX_OFFSET 0xE0 #define BARL 0x00 /* Buffer Address L (chained block) */ #define BARH 0x01 /* Buffer Address H (chained block) */ #define BARB 0x02 /* Buffer Address B (chained block) */ #define DARL 0x00 /* RX Destination Addr L (single block) */ #define DARH 0x01 /* RX Destination Addr H (single block) */ #define DARB 0x02 /* RX Destination Addr B (single block) */ #define SARL 0x04 /* TX Source Address L (single block) */ #define SARH 0x05 /* TX Source Address H (single block) */ #define SARB 0x06 /* TX Source Address B (single block) */ #define CPB 0x06 /* Chain Pointer Base (chained block) */ #define CDAL 0x08 /* Current Descriptor Addr L (chained block) */ #define CDAH 0x09 /* Current Descriptor Addr H (chained block) */ #define EDAL 0x0A /* Error Descriptor Addr L (chained block) */ #define EDAH 0x0B /* Error Descriptor Addr H (chained block) */ #define BFLL 0x0C /* RX Receive Buffer Length L (chained block)*/ #define BFLH 0x0D /* RX Receive Buffer Length H (chained block)*/ #define BCRL 0x0E /* Byte Count L */ #define BCRH 0x0F /* Byte Count H */ #define DSR 0x10 /* DMA Status */ #define DSR_RX(node) (DSR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) #define DSR_TX(node) (DSR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) #define DMR 0x11 /* DMA Mode */ #define DMR_RX(node) (DMR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) #define DMR_TX(node) (DMR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) #define FCT 0x13 /* Frame End Interrupt Counter */ #define FCT_RX(node) (FCT + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) #define FCT_TX(node) (FCT + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) #define DIR 0x14 /* DMA Interrupt Enable */ #define DIR_RX(node) (DIR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) #define DIR_TX(node) (DIR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) #define DCR 0x15 /* DMA Command */ #define DCR_RX(node) (DCR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) #define DCR_TX(node) (DCR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) /* Descriptor Structure */ typedef struct { u16 cp; /* Chain Pointer */ u32 bp; /* Buffer Pointer (24 bits) */ u16 len; /* Data Length */ u8 stat; /* Status */ u8 unused; /* pads to 2-byte boundary */ } __packed pkt_desc; /* Packet Descriptor Status bits */ #define ST_TX_EOM 0x80 /* End of frame */ #define ST_TX_EOT 0x01 /* End of transmission */ #define ST_RX_EOM 0x80 /* End of frame */ #define ST_RX_SHORT 0x40 /* Short frame */ #define ST_RX_ABORT 0x20 /* Abort */ #define ST_RX_RESBIT 0x10 /* Residual bit */ #define ST_RX_OVERRUN 0x08 /* Overrun */ #define ST_RX_CRC 0x04 /* CRC */ #define ST_ERROR_MASK 0x7C #define DIR_EOTE 0x80 /* Transfer completed */ #define DIR_EOME 0x40 /* Frame Transfer Completed (chained-block) */ #define DIR_BOFE 0x20 /* Buffer Overflow/Underflow (chained-block)*/ #define DIR_COFE 0x10 /* Counter Overflow (chained-block) */ #define DSR_EOT 0x80 /* Transfer completed */ #define DSR_EOM 0x40 /* Frame Transfer Completed (chained-block) */ #define DSR_BOF 0x20 /* Buffer Overflow/Underflow (chained-block)*/ #define DSR_COF 0x10 /* Counter Overflow (chained-block) */ #define DSR_DE 0x02 /* DMA Enable */ #define DSR_DWE 0x01 /* DMA Write Disable */ /* DMA Master Enable Register (DMER) bits */ #define DMER_DME 0x80 /* DMA Master Enable */ #define CMD_RESET 0x21 /* Reset Channel */ #define CMD_TX_ENABLE 0x02 /* Start transmitter */ #define CMD_RX_ENABLE 0x12 /* Start receiver */ #define MD0_HDLC 0x80 /* Bit-sync HDLC mode */ #define MD0_CRC_ENA 0x04 /* Enable CRC code calculation */ #define MD0_CRC_CCITT 0x02 /* CCITT CRC instead of CRC-16 */ #define MD0_CRC_PR1 0x01 /* Initial all-ones instead of all-zeros */ #define MD0_CRC_NONE 0x00 #define MD0_CRC_16_0 0x04 #define MD0_CRC_16 0x05 #define MD0_CRC_ITU_0 0x06 #define MD0_CRC_ITU 0x07 #define MD2_NRZ 0x00 #define MD2_NRZI 0x20 #define MD2_MANCHESTER 0x80 #define MD2_FM_MARK 0xA0 #define MD2_FM_SPACE 0xC0 #define MD2_LOOPBACK 0x03 /* Local data Loopback */ #define CTL_NORTS 0x01 #define CTL_IDLE 0x10 /* Transmit an idle pattern */ #define CTL_UDRNC 0x20 /* Idle after CRC or FCS+flag transmission */ #define ST0_TXRDY 0x02 /* TX ready */ #define ST0_RXRDY 0x01 /* RX ready */ #define ST1_UDRN 0x80 /* MSCI TX underrun */ #define ST1_CDCD 0x04 /* DCD level changed */ #define ST3_CTS 0x08 /* modem input - /CTS */ #define ST3_DCD 0x04 /* modem input - /DCD */ #define IE0_TXINT 0x80 /* TX INT MSCI interrupt enable */ #define IE0_RXINTA 0x40 /* RX INT A MSCI interrupt enable */ #define IE1_UDRN 0x80 /* TX underrun MSCI interrupt enable */ #define IE1_CDCD 0x04 /* DCD level changed */ #define DCR_ABORT 0x01 /* Software abort command */ #define DCR_CLEAR_EOF 0x02 /* Clear EOF interrupt */ /* TX and RX Clock Source - RXS and TXS */ #define CLK_BRG_MASK 0x0F #define CLK_LINE_RX 0x00 /* TX/RX clock line input */ #define CLK_LINE_TX 0x00 /* TX/RX line input */ #define CLK_BRG_RX 0x40 /* internal baud rate generator */ #define CLK_BRG_TX 0x40 /* internal baud rate generator */ #define CLK_RXCLK_TX 0x60 /* TX clock from RX clock */ #endifOverall Contributors
| Person | Tokens | Prop | Commits | CommitProp | |
| linus torvalds | linus torvalds | 767 | 95.52% | 1 | 20.00% |
| francois romieu | francois romieu | 18 | 2.24% | 1 | 20.00% |
| krzysztof halasa | krzysztof halasa | 15 | 1.87% | 1 | 20.00% |
| geert uytterhoeven | geert uytterhoeven | 2 | 0.25% | 1 | 20.00% |
| eric dumazet | eric dumazet | 1 | 0.12% | 1 | 20.00% |
| Total | 803 | 100.00% | 5 | 100.00% |