Release 4.7 drivers/scsi/eata.c
/*
* eata.c - Low-level driver for EATA/DMA SCSI host adapters.
*
* 03 Jun 2003 Rev. 8.10 for linux-2.5.70
* + Update for new IRQ API.
* + Use "goto" when appropriate.
* + Drop eata.h.
* + Update for new module_param API.
* + Module parameters can now be specified only in the
* same format as the kernel boot options.
*
* boot option old module param
* ----------- ------------------
* addr,... io_port=addr,...
* lc:[y|n] linked_comm=[1|0]
* mq:xx max_queue_depth=xx
* tm:[0|1|2] tag_mode=[0|1|2]
* et:[y|n] ext_tran=[1|0]
* rs:[y|n] rev_scan=[1|0]
* ip:[y|n] isa_probe=[1|0]
* ep:[y|n] eisa_probe=[1|0]
* pp:[y|n] pci_probe=[1|0]
*
* A valid example using the new parameter format is:
* modprobe eata "eata=0x7410,0x230,lc:y,tm:0,mq:4,ep:n"
*
* which is equivalent to the old format:
* modprobe eata io_port=0x7410,0x230 linked_comm=1 tag_mode=0 \
* max_queue_depth=4 eisa_probe=0
*
* 12 Feb 2003 Rev. 8.04 for linux 2.5.60
* + Release irq before calling scsi_register.
*
* 12 Nov 2002 Rev. 8.02 for linux 2.5.47
* + Release driver_lock before calling scsi_register.
*
* 11 Nov 2002 Rev. 8.01 for linux 2.5.47
* + Fixed bios_param and scsicam_bios_param calling parameters.
*
* 28 Oct 2002 Rev. 8.00 for linux 2.5.44-ac4
* + Use new tcq and adjust_queue_depth api.
* + New command line option (tm:[0-2]) to choose the type of tags:
* 0 -> disable tagging ; 1 -> simple tags ; 2 -> ordered tags.
* Default is tm:0 (tagged commands disabled).
* For compatibility the "tc:" option is an alias of the "tm:"
* option; tc:n is equivalent to tm:0 and tc:y is equivalent to
* tm:1.
* + The tagged_comm module parameter has been removed, use tag_mode
* instead, equivalent to the "tm:" boot option.
*
* 10 Oct 2002 Rev. 7.70 for linux 2.5.42
* + Foreport from revision 6.70.
*
* 25 Jun 2002 Rev. 6.70 for linux 2.4.19
* + This release is the first one tested on a Big Endian platform:
* fixed endian-ness problem due to bitfields;
* fixed endian-ness problem in read_pio.
* + Added new options for selectively probing ISA, EISA and PCI bus:
*
* Boot option Parameter name Default according to
*
* ip:[y|n] isa_probe=[1|0] CONFIG_ISA defined
* ep:[y|n] eisa_probe=[1|0] CONFIG_EISA defined
* pp:[y|n] pci_probe=[1|0] CONFIG_PCI defined
*
* The default action is to perform probing if the corresponding
* bus is configured and to skip probing otherwise.
*
* + If pci_probe is in effect and a list of I/O ports is specified
* as parameter or boot option, pci_enable_device() is performed
* on all pci devices matching PCI_CLASS_STORAGE_SCSI.
*
* 21 Feb 2002 Rev. 6.52 for linux 2.4.18
* + Backport from rev. 7.22 (use io_request_lock).
*
* 20 Feb 2002 Rev. 7.22 for linux 2.5.5
* + Remove any reference to virt_to_bus().
* + Fix pio hang while detecting multiple HBAs.
* + Fixed a board detection bug: in a system with
* multiple ISA/EISA boards, all but the first one
* were erroneously detected as PCI.
*
* 01 Jan 2002 Rev. 7.20 for linux 2.5.1
* + Use the dynamic DMA mapping API.
*
* 19 Dec 2001 Rev. 7.02 for linux 2.5.1
* + Use SCpnt->sc_data_direction if set.
* + Use sglist.page instead of sglist.address.
*
* 11 Dec 2001 Rev. 7.00 for linux 2.5.1
* + Use host->host_lock instead of io_request_lock.
*
* 1 May 2001 Rev. 6.05 for linux 2.4.4
* + Clean up all pci related routines.
* + Fix data transfer direction for opcode SEND_CUE_SHEET (0x5d)
*
* 30 Jan 2001 Rev. 6.04 for linux 2.4.1
* + Call pci_resource_start after pci_enable_device.
*
* 25 Jan 2001 Rev. 6.03 for linux 2.4.0
* + "check_region" call replaced by "request_region".
*
* 22 Nov 2000 Rev. 6.02 for linux 2.4.0-test11
* + Return code checked when calling pci_enable_device.
* + Removed old scsi error handling support.
* + The obsolete boot option flag eh:n is silently ignored.
* + Removed error messages while a disk drive is powered up at
* boot time.
* + Improved boot messages: all tagged capable device are
* indicated as "tagged" or "soft-tagged" :
* - "soft-tagged" means that the driver is trying to do its
* own tagging (i.e. the tc:y option is in effect);
* - "tagged" means that the device supports tagged commands,
* but the driver lets the HBA be responsible for tagging
* support.
*
* 16 Sep 1999 Rev. 5.11 for linux 2.2.12 and 2.3.18
* + Updated to the new __setup interface for boot command line options.
* + When loaded as a module, accepts the new parameter boot_options
* which value is a string with the same format of the kernel boot
* command line options. A valid example is:
* modprobe eata 'boot_options="0x7410,0x230,lc:y,tc:n,mq:4"'
*
* 9 Sep 1999 Rev. 5.10 for linux 2.2.12 and 2.3.17
* + 64bit cleanup for Linux/Alpha platform support
* (contribution from H.J. Lu).
*
* 22 Jul 1999 Rev. 5.00 for linux 2.2.10 and 2.3.11
* + Removed pre-2.2 source code compatibility.
* + Added call to pci_set_master.
*
* 26 Jul 1998 Rev. 4.33 for linux 2.0.35 and 2.1.111
* + Added command line option (rs:[y|n]) to reverse the scan order
* of PCI boards. The default is rs:y, which reverses the BIOS order
* while registering PCI boards. The default value rs:y generates
* the same order of all previous revisions of this driver.
* Pls. note that "BIOS order" might have been reversed itself
* after the 2.1.9x PCI modifications in the linux kernel.
* The rs value is ignored when the explicit list of addresses
* is used by the "eata=port0,port1,..." command line option.
* + Added command line option (et:[y|n]) to force use of extended
* translation (255 heads, 63 sectors) as disk geometry.
* The default is et:n, which uses the disk geometry returned
* by scsicam_bios_param. The default value et:n is compatible with
* all previous revisions of this driver.
*
* 28 May 1998 Rev. 4.32 for linux 2.0.33 and 2.1.104
* Increased busy timeout from 10 msec. to 200 msec. while
* processing interrupts.
*
* 16 May 1998 Rev. 4.31 for linux 2.0.33 and 2.1.102
* Improved abort handling during the eh recovery process.
*
* 13 May 1998 Rev. 4.30 for linux 2.0.33 and 2.1.101
* The driver is now fully SMP safe, including the
* abort and reset routines.
* Added command line options (eh:[y|n]) to choose between
* new_eh_code and the old scsi code.
* If linux version >= 2.1.101 the default is eh:y, while the eh
* option is ignored for previous releases and the old scsi code
* is used.
*
* 18 Apr 1998 Rev. 4.20 for linux 2.0.33 and 2.1.97
* Reworked interrupt handler.
*
* 11 Apr 1998 rev. 4.05 for linux 2.0.33 and 2.1.95
* Major reliability improvement: when a batch with overlapping
* requests is detected, requests are queued one at a time
* eliminating any possible board or drive reordering.
*
* 10 Apr 1998 rev. 4.04 for linux 2.0.33 and 2.1.95
* Improved SMP support (if linux version >= 2.1.95).
*
* 9 Apr 1998 rev. 4.03 for linux 2.0.33 and 2.1.94
* Added support for new PCI code and IO-APIC remapping of irqs.
* Performance improvement: when sequential i/o is detected,
* always use direct sort instead of reverse sort.
*
* 4 Apr 1998 rev. 4.02 for linux 2.0.33 and 2.1.92
* io_port is now unsigned long.
*
* 17 Mar 1998 rev. 4.01 for linux 2.0.33 and 2.1.88
* Use new scsi error handling code (if linux version >= 2.1.88).
* Use new interrupt code.
*
* 12 Sep 1997 rev. 3.11 for linux 2.0.30 and 2.1.55
* Use of udelay inside the wait loops to avoid timeout
* problems with fast cpus.
* Removed check about useless calls to the interrupt service
* routine (reported on SMP systems only).
* At initialization time "sorted/unsorted" is displayed instead
* of "linked/unlinked" to reinforce the fact that "linking" is
* nothing but "elevator sorting" in the actual implementation.
*
* 17 May 1997 rev. 3.10 for linux 2.0.30 and 2.1.38
* Use of serial_number_at_timeout in abort and reset processing.
* Use of the __initfunc and __initdata macro in setup code.
* Minor cleanups in the list_statistics code.
* Increased controller busy timeout in order to better support
* slow SCSI devices.
*
* 24 Feb 1997 rev. 3.00 for linux 2.0.29 and 2.1.26
* When loading as a module, parameter passing is now supported
* both in 2.0 and in 2.1 style.
* Fixed data transfer direction for some SCSI opcodes.
* Immediate acknowledge to request sense commands.
* Linked commands to each disk device are now reordered by elevator
* sorting. Rare cases in which reordering of write requests could
* cause wrong results are managed.
* Fixed spurious timeouts caused by long simple queue tag sequences.
* New command line option (tm:[0-3]) to choose the type of tags:
* 0 -> mixed (default); 1 -> simple; 2 -> head; 3 -> ordered.
*
* 18 Jan 1997 rev. 2.60 for linux 2.1.21 and 2.0.28
* Added command line options to enable/disable linked commands
* (lc:[y|n]), tagged commands (tc:[y|n]) and to set the max queue
* depth (mq:xx). Default is "eata=lc:n,tc:n,mq:16".
* Improved command linking.
* Documented how to setup RAID-0 with DPT SmartRAID boards.
*
* 8 Jan 1997 rev. 2.50 for linux 2.1.20 and 2.0.27
* Added linked command support.
* Improved detection of PCI boards using ISA base addresses.
*
* 3 Dec 1996 rev. 2.40 for linux 2.1.14 and 2.0.27
* Added support for tagged commands and queue depth adjustment.
*
* 22 Nov 1996 rev. 2.30 for linux 2.1.12 and 2.0.26
* When CONFIG_PCI is defined, BIOS32 is used to include in the
* list of i/o ports to be probed all the PCI SCSI controllers.
* The list of i/o ports to be probed can be overwritten by the
* "eata=port0,port1,...." boot command line option.
* Scatter/gather lists are now allocated by a number of kmalloc
* calls, in order to avoid the previous size limit of 64Kb.
*
* 16 Nov 1996 rev. 2.20 for linux 2.1.10 and 2.0.25
* Added support for EATA 2.0C, PCI, multichannel and wide SCSI.
*
* 27 Sep 1996 rev. 2.12 for linux 2.1.0
* Portability cleanups (virtual/bus addressing, little/big endian
* support).
*
* 09 Jul 1996 rev. 2.11 for linux 2.0.4
* Number of internal retries is now limited.
*
* 16 Apr 1996 rev. 2.10 for linux 1.3.90
* New argument "reset_flags" to the reset routine.
*
* 6 Jul 1995 rev. 2.01 for linux 1.3.7
* Update required by the new /proc/scsi support.
*
* 11 Mar 1995 rev. 2.00 for linux 1.2.0
* Fixed a bug which prevented media change detection for removable
* disk drives.
*
* 23 Feb 1995 rev. 1.18 for linux 1.1.94
* Added a check for scsi_register returning NULL.
*
* 11 Feb 1995 rev. 1.17 for linux 1.1.91
* Now DEBUG_RESET is disabled by default.
* Register a board even if it does not assert DMA protocol support
* (DPT SK2011B does not report correctly the dmasup bit).
*
* 9 Feb 1995 rev. 1.16 for linux 1.1.90
* Use host->wish_block instead of host->block.
* New list of Data Out SCSI commands.
*
* 8 Feb 1995 rev. 1.15 for linux 1.1.89
* Cleared target_time_out counter while performing a reset.
* All external symbols renamed to avoid possible name conflicts.
*
* 28 Jan 1995 rev. 1.14 for linux 1.1.86
* Added module support.
* Log and do a retry when a disk drive returns a target status
* different from zero on a recovered error.
*
* 24 Jan 1995 rev. 1.13 for linux 1.1.85
* Use optimized board configuration, with a measured performance
* increase in the range 10%-20% on i/o throughput.
*
* 16 Jan 1995 rev. 1.12 for linux 1.1.81
* Fix mscp structure comments (no functional change).
* Display a message if check_region detects a port address
* already in use.
*
* 17 Dec 1994 rev. 1.11 for linux 1.1.74
* Use the scsicam_bios_param routine. This allows an easy
* migration path from disk partition tables created using
* different SCSI drivers and non optimal disk geometry.
*
* 15 Dec 1994 rev. 1.10 for linux 1.1.74
* Added support for ISA EATA boards (DPT PM2011, DPT PM2021).
* The host->block flag is set for all the detected ISA boards.
* The detect routine no longer enforces LEVEL triggering
* for EISA boards, it just prints a warning message.
*
* 30 Nov 1994 rev. 1.09 for linux 1.1.68
* Redo i/o on target status CHECK_CONDITION for TYPE_DISK only.
* Added optional support for using a single board at a time.
*
* 18 Nov 1994 rev. 1.08 for linux 1.1.64
* Forces sg_tablesize = 64 and can_queue = 64 if these
* values are not correctly detected (DPT PM2012).
*
* 14 Nov 1994 rev. 1.07 for linux 1.1.63 Final BETA release.
* 04 Aug 1994 rev. 1.00 for linux 1.1.39 First BETA release.
*
*
* This driver is based on the CAM (Common Access Method Committee)
* EATA (Enhanced AT Bus Attachment) rev. 2.0A, using DMA protocol.
*
* Copyright (C) 1994-2003 Dario Ballabio (ballabio_dario@emc.com)
*
* Alternate email: dario.ballabio@inwind.it, dario.ballabio@tiscalinet.it
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that redistributions of source
* code retain the above copyright notice and this comment without
* modification.
*
*/
/*
*
* Here is a brief description of the DPT SCSI host adapters.
* All these boards provide an EATA/DMA compatible programming interface
* and are fully supported by this driver in any configuration, including
* multiple SCSI channels:
*
* PM2011B/9X - Entry Level ISA
* PM2021A/9X - High Performance ISA
* PM2012A Old EISA
* PM2012B Old EISA
* PM2022A/9X - Entry Level EISA
* PM2122A/9X - High Performance EISA
* PM2322A/9X - Extra High Performance EISA
* PM3021 - SmartRAID Adapter for ISA
* PM3222 - SmartRAID Adapter for EISA (PM3222W is 16-bit wide SCSI)
* PM3224 - SmartRAID Adapter for PCI (PM3224W is 16-bit wide SCSI)
* PM33340UW - SmartRAID Adapter for PCI ultra wide multichannel
*
* The above list is just an indication: as a matter of fact all DPT
* boards using the EATA/DMA protocol are supported by this driver,
* since they use exactely the same programming interface.
*
* The DPT PM2001 provides only the EATA/PIO interface and hence is not
* supported by this driver.
*
* This code has been tested with up to 3 Distributed Processing Technology
* PM2122A/9X (DPT SCSI BIOS v002.D1, firmware v05E.0) EISA controllers,
* in any combination of private and shared IRQ.
* PCI support has been tested using up to 2 DPT PM3224W (DPT SCSI BIOS
* v003.D0, firmware v07G.0).
*
* DPT SmartRAID boards support "Hardware Array" - a group of disk drives
* which are all members of the same RAID-0, RAID-1 or RAID-5 array implemented
* in host adapter hardware. Hardware Arrays are fully compatible with this
* driver, since they look to it as a single disk drive.
*
* WARNING: to create a RAID-0 "Hardware Array" you must select "Other Unix"
* as the current OS in the DPTMGR "Initial System Installation" menu.
* Otherwise RAID-0 is generated as an "Array Group" (i.e. software RAID-0),
* which is not supported by the actual SCSI subsystem.
* To get the "Array Group" functionality, the Linux MD driver must be used
* instead of the DPT "Array Group" feature.
*
* Multiple ISA, EISA and PCI boards can be configured in the same system.
* It is suggested to put all the EISA boards on the same IRQ level, all
* the PCI boards on another IRQ level, while ISA boards cannot share
* interrupts.
*
* If you configure multiple boards on the same IRQ, the interrupt must
* be _level_ triggered (not _edge_ triggered).
*
* This driver detects EATA boards by probes at fixed port addresses,
* so no BIOS32 or PCI BIOS support is required.
* The suggested way to detect a generic EATA PCI board is to force on it
* any unused EISA address, even if there are other controllers on the EISA
* bus, or even if you system has no EISA bus at all.
* Do not force any ISA address on EATA PCI boards.
*
* If PCI bios support is configured into the kernel, BIOS32 is used to
* include in the list of i/o ports to be probed all the PCI SCSI controllers.
*
* Due to a DPT BIOS "feature", it might not be possible to force an EISA
* address on more than a single DPT PCI board, so in this case you have to
* let the PCI BIOS assign the addresses.
*
* The sequence of detection probes is:
*
* - ISA 0x1F0;
* - PCI SCSI controllers (only if BIOS32 is available);
* - EISA/PCI 0x1C88 through 0xFC88 (corresponding to EISA slots 1 to 15);
* - ISA 0x170, 0x230, 0x330.
*
* The above list of detection probes can be totally replaced by the
* boot command line option: "eata=port0,port1,port2,...", where the
* port0, port1... arguments are ISA/EISA/PCI addresses to be probed.
* For example using "eata=0x7410,0x7450,0x230", the driver probes
* only the two PCI addresses 0x7410 and 0x7450 and the ISA address 0x230,
* in this order; "eata=0" totally disables this driver.
*
* After the optional list of detection probes, other possible command line
* options are:
*
* et:y force use of extended translation (255 heads, 63 sectors);
* et:n use disk geometry detected by scsicam_bios_param;
* rs:y reverse scan order while detecting PCI boards;
* rs:n use BIOS order while detecting PCI boards;
* lc:y enables linked commands;
* lc:n disables linked commands;
* tm:0 disables tagged commands (same as tc:n);
* tm:1 use simple queue tags (same as tc:y);
* tm:2 use ordered queue tags (same as tc:2);
* mq:xx set the max queue depth to the value xx (2 <= xx <= 32).
*
* The default value is: "eata=lc:n,mq:16,tm:0,et:n,rs:n".
* An example using the list of detection probes could be:
* "eata=0x7410,0x230,lc:y,tm:2,mq:4,et:n".
*
* When loading as a module, parameters can be specified as well.
* The above example would be (use 1 in place of y and 0 in place of n):
*
* modprobe eata io_port=0x7410,0x230 linked_comm=1 \
* max_queue_depth=4 ext_tran=0 tag_mode=2 \
* rev_scan=1
*
* ----------------------------------------------------------------------------
* In this implementation, linked commands are designed to work with any DISK
* or CD-ROM, since this linking has only the intent of clustering (time-wise)
* and reordering by elevator sorting commands directed to each device,
* without any relation with the actual SCSI protocol between the controller
* and the device.
* If Q is the queue depth reported at boot time for each device (also named
* cmds/lun) and Q > 2, whenever there is already an active command to the
* device all other commands to the same device (up to Q-1) are kept waiting
* in the elevator sorting queue. When the active command completes, the
* commands in this queue are sorted by sector address. The sort is chosen
* between increasing or decreasing by minimizing the seek distance between
* the sector of the commands just completed and the sector of the first
* command in the list to be sorted.
* Trivial math assures that the unsorted average seek distance when doing
* random seeks over S sectors is S/3.
* When (Q-1) requests are uniformly distributed over S sectors, the average
* distance between two adjacent requests is S/((Q-1) + 1), so the sorted
* average seek distance for (Q-1) random requests over S sectors is S/Q.
* The elevator sorting hence divides the seek distance by a factor Q/3.
* The above pure geometric remarks are valid in all cases and the
* driver effectively reduces the seek distance by the predicted factor
* when there are Q concurrent read i/o operations on the device, but this
* does not necessarily results in a noticeable performance improvement:
* your mileage may vary....
*
* Note: command reordering inside a batch of queued commands could cause
* wrong results only if there is at least one write request and the
* intersection (sector-wise) of all requests is not empty.
* When the driver detects a batch including overlapping requests
* (a really rare event) strict serial (pid) order is enforced.
* ----------------------------------------------------------------------------
* The extended translation option (et:y) is useful when using large physical
* disks/arrays. It could also be useful when switching between Adaptec boards
* and DPT boards without reformatting the disk.
* When a boot disk is partitioned with extended translation, in order to
* be able to boot it with a DPT board is could be necessary to add to
* lilo.conf additional commands as in the following example:
*
* fix-table
* disk=/dev/sda bios=0x80 sectors=63 heads=128 cylindres=546
*
* where the above geometry should be replaced with the one reported at
* power up by the DPT controller.
* ----------------------------------------------------------------------------
*
* The boards are named EATA0, EATA1,... according to the detection order.
*
* In order to support multiple ISA boards in a reliable way,
* the driver sets host->wish_block = 1 for all ISA boards.
*/
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/proc_fs.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/stat.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/ctype.h>
#include <linux/spinlock.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <asm/byteorder.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
static int eata2x_detect(struct scsi_host_template *);
static int eata2x_release(struct Scsi_Host *);
static int eata2x_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
static int eata2x_eh_abort(struct scsi_cmnd *);
static int eata2x_eh_host_reset(struct scsi_cmnd *);
static int eata2x_bios_param(struct scsi_device *, struct block_device *,
sector_t, int *);
static int eata2x_slave_configure(struct scsi_device *);
static struct scsi_host_template driver_template = {
.name = "EATA/DMA 2.0x rev. 8.10.00 ",
.detect = eata2x_detect,
.release = eata2x_release,
.queuecommand = eata2x_queuecommand,
.eh_abort_handler = eata2x_eh_abort,
.eh_host_reset_handler = eata2x_eh_host_reset,
.bios_param = eata2x_bios_param,
.slave_configure = eata2x_slave_configure,
.this_id = 7,
.unchecked_isa_dma = 1,
.use_clustering = ENABLE_CLUSTERING,
};
#if !defined(__BIG_ENDIAN_BITFIELD) && !defined(__LITTLE_ENDIAN_BITFIELD)
#error "Adjust your <asm/byteorder.h> defines"
#endif
/* Subversion values */
#define ISA 0
#define ESA 1
#undef FORCE_CONFIG
#undef DEBUG_LINKED_COMMANDS
#undef DEBUG_DETECT
#undef DEBUG_PCI_DETECT
#undef DEBUG_INTERRUPT
#undef DEBUG_RESET
#undef DEBUG_GENERATE_ERRORS
#undef DEBUG_GENERATE_ABORTS
#undef DEBUG_GEOMETRY
#define MAX_ISA 4
#define MAX_VESA 0
#define MAX_EISA 15
#define MAX_PCI 16
#define MAX_BOARDS (MAX_ISA + MAX_VESA + MAX_EISA + MAX_PCI)
#define MAX_CHANNEL 4
#define MAX_LUN 32
#define MAX_TARGET 32
#define MAX_MAILBOXES 64
#define MAX_SGLIST 64
#define MAX_LARGE_SGLIST 122
#define MAX_INTERNAL_RETRIES 64
#define MAX_CMD_PER_LUN 2
#define MAX_TAGGED_CMD_PER_LUN (MAX_MAILBOXES - MAX_CMD_PER_LUN)
#define SKIP ULONG_MAX
#define FREE 0
#define IN_USE 1
#define LOCKED 2
#define IN_RESET 3
#define IGNORE 4
#define READY 5
#define ABORTING 6
#define NO_DMA 0xff
#define MAXLOOP 10000
#define TAG_DISABLED 0
#define TAG_SIMPLE 1
#define TAG_ORDERED 2
#define REG_CMD 7
#define REG_STATUS 7
#define REG_AUX_STATUS 8
#define REG_DATA 0
#define REG_DATA2 1
#define REG_SEE 6
#define REG_LOW 2
#define REG_LM 3
#define REG_MID 4
#define REG_MSB 5
#define REGION_SIZE 9UL
#define MAX_ISA_ADDR 0x03ff
#define MIN_EISA_ADDR 0x1c88
#define MAX_EISA_ADDR 0xfc88
#define BSY_ASSERTED 0x80
#define DRQ_ASSERTED 0x08
#define ABSY_ASSERTED 0x01
#define IRQ_ASSERTED 0x02
#define READ_CONFIG_PIO 0xf0
#define SET_CONFIG_PIO 0xf1
#define SEND_CP_PIO 0xf2
#define RECEIVE_SP_PIO 0xf3
#define TRUNCATE_XFR_PIO 0xf4
#define RESET_PIO 0xf9
#define READ_CONFIG_DMA 0xfd
#define SET_CONFIG_DMA 0xfe
#define SEND_CP_DMA 0xff
#define ASOK 0x00
#define ASST 0x01
#define YESNO(a) ((a) ? 'y' : 'n')
#define TLDEV(type) ((type) == TYPE_DISK || (type) == TYPE_ROM)
/* "EATA", in Big Endian format */
#define EATA_SIG_BE 0x45415441
/* Number of valid bytes in the board config structure for EATA 2.0x */
#define EATA_2_0A_SIZE 28
#define EATA_2_0B_SIZE 30
#define EATA_2_0C_SIZE 34
/* Board info structure */
struct eata_info {
u_int32_t data_len; /* Number of valid bytes after this field */
u_int32_t sign; /* ASCII "EATA" signature */
#if defined(__BIG_ENDIAN_BITFIELD)
unchar version : 4,
: 4;
unchar haaval : 1,
ata : 1,
drqvld : 1,
dmasup : 1,
morsup : 1,
trnxfr : 1,
tarsup : 1,
ocsena : 1;
#else
unchar : 4, /* unused low nibble */
version : 4; /* EATA version, should be 0x1 */
unchar ocsena : 1, /* Overlap Command Support Enabled */
tarsup : 1, /* Target Mode Supported */
trnxfr : 1, /* Truncate Transfer Cmd NOT Necessary */
morsup : 1, /* More Supported */
dmasup : 1, /* DMA Supported */
drqvld : 1, /* DRQ Index (DRQX) is valid */
ata : 1, /* This is an ATA device */
haaval : 1; /* Host Adapter Address Valid */
#endif
ushort cp_pad_len; /* Number of pad bytes after cp_len */
unchar host_addr[4]; /* Host Adapter SCSI ID for channels 3, 2, 1, 0 */
u_int32_t cp_len; /* Number of valid bytes in cp */
u_int32_t sp_len; /* Number of valid bytes in sp */
ushort queue_size; /* Max number of cp that can be queued */
ushort unused;
ushort scatt_size; /* Max number of entries in scatter/gather table */
#if defined(__BIG_ENDIAN_BITFIELD)
unchar drqx : 2,
second : 1,
irq_tr : 1,
irq : 4;
unchar sync;
unchar : 4,
res1 : 1,
large_sg : 1,
forcaddr : 1,
isaena : 1;
unchar max_chan : 3,
max_id : 5;
unchar max_lun;
unchar eisa : 1,
pci : 1,
idquest : 1,
m1 : 1,
: 4;
#else
unchar irq : 4, /* Interrupt Request assigned to this controller */
irq_tr : 1, /* 0 for edge triggered, 1 for level triggered */
second : 1, /* 1 if this is a secondary (not primary) controller */
drqx : 2; /* DRQ Index (0=DMA0, 1=DMA7, 2=DMA6, 3=DMA5) */
unchar sync; /* 1 if scsi target id 7...0 is running sync scsi */
/* Structure extension defined in EATA 2.0B */
unchar isaena : 1, /* ISA i/o addressing is disabled/enabled */
forcaddr : 1, /* Port address has been forced */
large_sg : 1, /* 1 if large SG lists are supported */
res1 : 1,
: 4;
unchar max_id : 5, /* Max SCSI target ID number */
max_chan : 3; /* Max SCSI channel number on this board */
/* Structure extension defined in EATA 2.0C */
unchar max_lun; /* Max SCSI LUN number */
unchar
: 4,
m1 : 1, /* This is a PCI with an M1 chip installed */
idquest : 1, /* RAIDNUM returned is questionable */
pci : 1, /* This board is PCI */
eisa : 1; /* This board is EISA */
#endif
unchar raidnum; /* Uniquely identifies this HBA in a system */
unchar notused;
ushort ipad[247];
};
/* Board config structure */
struct eata_config {
ushort len; /* Number of bytes following this field */
#if defined(__BIG_ENDIAN_BITFIELD)
unchar : 4,
tarena : 1,
mdpena : 1,
ocena : 1,
edis : 1;
#else
unchar edis : 1, /* Disable EATA interface after config command */
ocena : 1, /* Overlapped Commands Enabled */
mdpena : 1, /* Transfer all Modified Data Pointer Messages */
tarena : 1, /* Target Mode Enabled for this controller */
: 4;
#endif
unchar cpad[511];
};
/* Returned status packet structure */
struct mssp {
#if defined(__BIG_ENDIAN_BITFIELD)
unchar eoc : 1,
adapter_status : 7;
#else
unchar adapter_status : 7, /* State related to current command */
eoc : 1; /* End Of Command (1 = command completed) */
#endif
unchar target_status; /* SCSI status received after data transfer */
unchar unused[2];
u_int32_t inv_res_len; /* Number of bytes not transferred */
u_int32_t cpp_index; /* Index of address set in cp */
char mess[12];
};
struct sg_list {
unsigned int address; /* Segment Address */
unsigned int num_bytes; /* Segment Length */
};
/* MailBox SCSI Command Packet */
struct mscp {
#if defined(__BIG_ENDIAN_BITFIELD)
unchar din : 1,
dout : 1,
interp : 1,
: 1,
sg : 1,
reqsen :1,
init : 1,
sreset : 1;
unchar sense_len;
unchar unused[3];
unchar : 7,
fwnest : 1;
unchar : 5,
hbaci : 1,
iat : 1,
phsunit : 1;
unchar channel : 3,
target : 5;
unchar one : 1,
dispri : 1,
luntar : 1,
lun : 5;
#else
unchar sreset :1, /* SCSI Bus Reset Signal should be asserted */
init :1, /* Re-initialize controller and self test */
reqsen :1, /* Transfer Request Sense Data to addr using DMA */
sg :1, /* Use Scatter/Gather */
:1,
interp :1, /* The controller interprets cp, not the target */
dout :1, /* Direction of Transfer is Out (Host to Target) */
din :1; /* Direction of Transfer is In (Target to Host) */
unchar sense_len; /* Request Sense Length */
unchar unused[3];
unchar fwnest : 1, /* Send command to a component of an Array Group */
: 7;
unchar phsunit : 1, /* Send to Target Physical Unit (bypass RAID) */
iat : 1, /* Inhibit Address Translation */
hbaci : 1, /* Inhibit HBA Caching for this command */
: 5;
unchar target : 5, /* SCSI target ID */
channel : 3; /* SCSI channel number */
unchar lun : 5, /* SCSI logical unit number */
luntar : 1, /* This cp is for Target (not LUN) */
dispri : 1, /* Disconnect Privilege granted */
one : 1; /* 1 */
#endif
unchar mess[3]; /* Massage to/from Target */
unchar cdb[12]; /* Command Descriptor Block */
u_int32_t data_len; /* If sg=0 Data Length, if sg=1 sglist length */
u_int32_t cpp_index; /* Index of address to be returned in sp */
u_int32_t data_address; /* If sg=0 Data Address, if sg=1 sglist address */
u_int32_t sp_dma_addr; /* Address where sp is DMA'ed when cp completes */
u_int32_t sense_addr; /* Address where Sense Data is DMA'ed on error */
/* Additional fields begin here. */
struct scsi_cmnd *SCpnt;
/* All the cp structure is zero filled by queuecommand except the
following CP_TAIL_SIZE bytes, initialized by detect */
dma_addr_t cp_dma_addr; /* dma handle for this cp structure */
struct sg_list *sglist; /* pointer to the allocated SG list */
};
#define CP_TAIL_SIZE (sizeof(struct sglist *) + sizeof(dma_addr_t))
struct hostdata {
struct mscp cp[MAX_MAILBOXES]; /* Mailboxes for this board */
unsigned int cp_stat[MAX_MAILBOXES]; /* FREE, IN_USE, LOCKED, IN_RESET */
unsigned int last_cp_used; /* Index of last mailbox used */
unsigned int iocount; /* Total i/o done for this board */
int board_number; /* Number of this board */
char board_name[16]; /* Name of this board */
int in_reset; /* True if board is doing a reset */
int target_to[MAX_TARGET][MAX_CHANNEL]; /* N. of timeout errors on target */
int target_redo[MAX_TARGET][MAX_CHANNEL]; /* If 1 redo i/o on target */
unsigned int retries; /* Number of internal retries */
unsigned long last_retried_pid; /* Pid of last retried command */
unsigned char subversion; /* Bus type, either ISA or EISA/PCI */
unsigned char protocol_rev; /* EATA 2.0 rev., 'A' or 'B' or 'C' */
unsigned char is_pci; /* 1 is bus type is PCI */
struct pci_dev *pdev; /* pdev for PCI bus, NULL otherwise */
struct mssp *sp_cpu_addr; /* cpu addr for DMA buffer sp */
dma_addr_t sp_dma_addr; /* dma handle for DMA buffer sp */
struct mssp sp; /* Local copy of sp buffer */
};
static struct Scsi_Host *sh[MAX_BOARDS];
static const char *driver_name = "EATA";
static char sha[MAX_BOARDS];
/* Initialize num_boards so that ihdlr can work while detect is in progress */
static unsigned int num_boards = MAX_BOARDS;
static unsigned long io_port[] = {
/* Space for MAX_INT_PARAM ports usable while loading as a module */
SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP,
SKIP, SKIP,
/* First ISA */
0x1f0,
/* Space for MAX_PCI ports possibly reported by PCI_BIOS */
SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP,
SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP, SKIP,
/* MAX_EISA ports */
0x1c88, 0x2c88, 0x3c88, 0x4c88, 0x5c88, 0x6c88, 0x7c88, 0x8c88,
0x9c88, 0xac88, 0xbc88, 0xcc88, 0xdc88, 0xec88, 0xfc88,
/* Other (MAX_ISA - 1) ports */
0x170, 0x230, 0x330,
/* End of list */
0x0
};
/* Device is Big Endian */
#define H2DEV(x) cpu_to_be32(x)
#define DEV2H(x) be32_to_cpu(x)
#define H2DEV16(x) cpu_to_be16(x)
#define DEV2H16(x) be16_to_cpu(x)
/* But transfer orientation from the 16 bit data register is Little Endian */
#define REG2H(x) le16_to_cpu(x)
static irqreturn_t do_interrupt_handler(int, void *);
static void flush_dev(struct scsi_device *, unsigned long, struct hostdata *,
unsigned int);
static int do_trace = 0;
static int setup_done = 0;
static int link_statistics;
static int ext_tran = 0;
static int rev_scan = 1;
#if defined(CONFIG_SCSI_EATA_TAGGED_QUEUE)
static int tag_mode = TAG_SIMPLE;
#else
static int tag_mode = TAG_DISABLED;
#endif
#if defined(CONFIG_SCSI_EATA_LINKED_COMMANDS)
static int linked_comm = 1;
#else
static int linked_comm = 0;
#endif
#if defined(CONFIG_SCSI_EATA_MAX_TAGS)
static int max_queue_depth = CONFIG_SCSI_EATA_MAX_TAGS;
#else
static int max_queue_depth = MAX_CMD_PER_LUN;
#endif
#if defined(CONFIG_ISA)
static int isa_probe = 1;
#else
static int isa_probe = 0;
#endif
#if defined(CONFIG_EISA)
static int eisa_probe = 1;
#else
static int eisa_probe = 0;
#endif
#if defined(CONFIG_PCI)
static int pci_probe = 1;
#else
static int pci_probe = 0;
#endif
#define MAX_INT_PARAM 10
#define MAX_BOOT_OPTIONS_SIZE 256
static char boot_options[MAX_BOOT_OPTIONS_SIZE];
#if defined(MODULE)
#include <linux/module.h>
#include <linux/moduleparam.h>
module_param_string(eata, boot_options, MAX_BOOT_OPTIONS_SIZE, 0);
MODULE_PARM_DESC(eata, " equivalent to the \"eata=...\" kernel boot option."
" Example: modprobe eata \"eata=0x7410,0x230,lc:y,tm:0,mq:4,ep:n\"");
MODULE_AUTHOR("Dario Ballabio");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("EATA/DMA SCSI Driver");
#endif
static int eata2x_slave_configure(struct scsi_device *dev)
{
int tqd, utqd;
char *tag_suffix, *link_suffix;
utqd = MAX_CMD_PER_LUN;
tqd = max_queue_depth;
if (TLDEV(dev->type) && dev->tagged_supported) {
if (tag_mode == TAG_SIMPLE) {
tag_suffix = ", simple tags";
} else if (tag_mode == TAG_ORDERED) {
tag_suffix = ", ordered tags";
} else {
tag_suffix = ", no tags";
}
scsi_change_queue_depth(dev, tqd);
} else if (TLDEV(dev->type) && linked_comm) {
scsi_change_queue_depth(dev, tqd);
tag_suffix = ", untagged";
} else {
scsi_change_queue_depth(dev, utqd);
tag_suffix = "";
}
if (TLDEV(dev->type) && linked_comm && dev->queue_depth > 2)
link_suffix = ", sorted";
else if (TLDEV(dev->type))
link_suffix = ", unsorted";
else
link_suffix = "";
sdev_printk(KERN_INFO, dev,
"cmds/lun %d%s%s.\n",
dev->queue_depth, link_suffix, tag_suffix);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| alan cox | alan cox | 71 | 38.59% | 1 | 9.09% |
| pre-git | pre-git | 71 | 38.59% | 2 | 18.18% |
| doug ledford | doug ledford | 24 | 13.04% | 2 | 18.18% |
| christoph hellwig | christoph hellwig | 15 | 8.15% | 5 | 45.45% |
| jeff garzik | jeff garzik | 3 | 1.63% | 1 | 9.09% |
| Total | 184 | 100.00% | 11 | 100.00% |
static int wait_on_busy(unsigned long iobase, unsigned int loop)
{
while (inb(iobase + REG_AUX_STATUS) & ABSY_ASSERTED) {
udelay(1L);
if (--loop == 0)
return 1;
}
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 43 | 95.56% | 5 | 83.33% |
| christoph hellwig | christoph hellwig | 2 | 4.44% | 1 | 16.67% |
| Total | 45 | 100.00% | 6 | 100.00% |
static int do_dma(unsigned long iobase, unsigned long addr, unchar cmd)
{
unsigned char *byaddr;
unsigned long devaddr;
if (wait_on_busy(iobase, (addr ? MAXLOOP * 100 : MAXLOOP)))
return 1;
if (addr) {
devaddr = H2DEV(addr);
byaddr = (unsigned char *)&devaddr;
outb(byaddr[3], iobase + REG_LOW);
outb(byaddr[2], iobase + REG_LM);
outb(byaddr[1], iobase + REG_MID);
outb(byaddr[0], iobase + REG_MSB);
}
outb(cmd, iobase + REG_CMD);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 88 | 68.22% | 6 | 66.67% |
| alan cox | alan cox | 38 | 29.46% | 1 | 11.11% |
| christoph hellwig | christoph hellwig | 2 | 1.55% | 1 | 11.11% |
| dario ballabio | dario ballabio | 1 | 0.78% | 1 | 11.11% |
| Total | 129 | 100.00% | 9 | 100.00% |
static int read_pio(unsigned long iobase, ushort * start, ushort * end)
{
unsigned int loop = MAXLOOP;
ushort *p;
for (p = start; p <= end; p++) {
while (!(inb(iobase + REG_STATUS) & DRQ_ASSERTED)) {
udelay(1L);
if (--loop == 0)
return 1;
}
loop = MAXLOOP;
*p = REG2H(inw(iobase));
}
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 87 | 94.57% | 4 | 66.67% |
| dario ballabio | dario ballabio | 3 | 3.26% | 1 | 16.67% |
| christoph hellwig | christoph hellwig | 2 | 2.17% | 1 | 16.67% |
| Total | 92 | 100.00% | 6 | 100.00% |
static struct pci_dev *get_pci_dev(unsigned long port_base)
{
#if defined(CONFIG_PCI)
unsigned int addr;
struct pci_dev *dev = NULL;
while ((dev = pci_get_class(PCI_CLASS_STORAGE_SCSI << 8, dev))) {
addr = pci_resource_start(dev, 0);
#if defined(DEBUG_PCI_DETECT)
printk("%s: get_pci_dev, bus %d, devfn 0x%x, addr 0x%x.\n",
driver_name, dev->bus->number, dev->devfn, addr);
#endif
/* we are in so much trouble for a pci hotplug system with this driver
* anyway, so doing this at least lets people unload the driver and not
* cause memory problems, but in general this is a bad thing to do (this
* driver needs to be converted to the proper PCI api someday... */
pci_dev_put(dev);
if (addr + PCI_BASE_ADDRESS_0 == port_base)
return dev;
}
#endif /* end CONFIG_PCI */
return NULL;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 89 | 84.76% | 3 | 50.00% |
| linus torvalds | linus torvalds | 9 | 8.57% | 1 | 16.67% |
| greg kroah-hartman | greg kroah-hartman | 6 | 5.71% | 1 | 16.67% |
| christoph hellwig | christoph hellwig | 1 | 0.95% | 1 | 16.67% |
| Total | 105 | 100.00% | 6 | 100.00% |
static void enable_pci_ports(void)
{
#if defined(CONFIG_PCI)
struct pci_dev *dev = NULL;
while ((dev = pci_get_class(PCI_CLASS_STORAGE_SCSI << 8, dev))) {
#if defined(DEBUG_PCI_DETECT)
printk("%s: enable_pci_ports, bus %d, devfn 0x%x.\n",
driver_name, dev->bus->number, dev->devfn);
#endif
if (pci_enable_device(dev))
printk
("%s: warning, pci_enable_device failed, bus %d devfn 0x%x.\n",
driver_name, dev->bus->number, dev->devfn);
}
#endif /* end CONFIG_PCI */
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| alan cox | alan cox | 89 | 98.89% | 1 | 50.00% |
| greg kroah-hartman | greg kroah-hartman | 1 | 1.11% | 1 | 50.00% |
| Total | 90 | 100.00% | 2 | 100.00% |
static int port_detect(unsigned long port_base, unsigned int j,
struct scsi_host_template *tpnt)
{
unsigned char irq, dma_channel, subversion, i, is_pci = 0;
unsigned char protocol_rev;
struct eata_info info;
char *bus_type, dma_name[16];
struct pci_dev *pdev;
/* Allowed DMA channels for ISA (0 indicates reserved) */
unsigned char dma_channel_table[4] = { 5, 6, 7, 0 };
struct Scsi_Host *shost;
struct hostdata *ha;
char name[16];
sprintf(name, "%s%d", driver_name, j);
if (!request_region(port_base, REGION_SIZE, driver_name)) {
#if defined(DEBUG_DETECT)
printk("%s: address 0x%03lx in use, skipping probe.\n", name,
port_base);
#endif
goto fail;
}
if (do_dma(port_base, 0, READ_CONFIG_PIO)) {
#if defined(DEBUG_DETECT)
printk("%s: detect, do_dma failed at 0x%03lx.\n", name,
port_base);
#endif
goto freelock;
}
/* Read the info structure */
if (read_pio(port_base, (ushort *) & info, (ushort *) & info.ipad[0])) {
#if defined(DEBUG_DETECT)
printk("%s: detect, read_pio failed at 0x%03lx.\n", name,
port_base);
#endif
goto freelock;
}
info.data_len = DEV2H(info.data_len);
info.sign = DEV2H(info.sign);
info.cp_pad_len = DEV2H16(info.cp_pad_len);
info.cp_len = DEV2H(info.cp_len);
info.sp_len = DEV2H(info.sp_len);
info.scatt_size = DEV2H16(info.scatt_size);
info.queue_size = DEV2H16(info.queue_size);
/* Check the controller "EATA" signature */
if (info.sign != EATA_SIG_BE) {
#if defined(DEBUG_DETECT)
printk("%s: signature 0x%04x discarded.\n", name, info.sign);
#endif
goto freelock;
}
if (info.data_len < EATA_2_0A_SIZE) {
printk
("%s: config structure size (%d bytes) too short, detaching.\n",
name, info.data_len);
goto freelock;
} else if (info.data_len == EATA_2_0A_SIZE)
protocol_rev = 'A';
else if (info.data_len == EATA_2_0B_SIZE)
protocol_rev = 'B';
else
protocol_rev = 'C';
if (protocol_rev != 'A' && info.forcaddr) {
printk("%s: warning, port address has been forced.\n", name);
bus_type = "PCI";
is_pci = 1;
subversion = ESA;
} else if (port_base > MAX_EISA_ADDR
|| (protocol_rev == 'C' && info.pci)) {
bus_type = "PCI";
is_pci = 1;
subversion = ESA;
} else if (port_base >= MIN_EISA_ADDR
|| (protocol_rev == 'C' && info.eisa)) {
bus_type = "EISA";
subversion = ESA;
} else if (protocol_rev == 'C' && !info.eisa && !info.pci) {
bus_type = "ISA";
subversion = ISA;
} else if (port_base > MAX_ISA_ADDR) {
bus_type = "PCI";
is_pci = 1;
subversion = ESA;
} else {
bus_type = "ISA";
subversion = ISA;
}
if (!info.haaval || info.ata) {
printk
("%s: address 0x%03lx, unusable %s board (%d%d), detaching.\n",
name, port_base, bus_type, info.haaval, info.ata);
goto freelock;
}
if (info.drqvld) {
if (subversion == ESA)
printk("%s: warning, weird %s board using DMA.\n", name,
bus_type);
subversion = ISA;
dma_channel = dma_channel_table[3 - info.drqx];
} else {
if (subversion == ISA)
printk("%s: warning, weird %s board not using DMA.\n",
name, bus_type);
subversion = ESA;
dma_channel = NO_DMA;
}
if (!info.dmasup)
printk("%s: warning, DMA protocol support not asserted.\n",
name);
irq = info.irq;
if (subversion == ESA && !info.irq_tr)
printk
("%s: warning, LEVEL triggering is suggested for IRQ %u.\n",
name, irq);
if (is_pci) {
pdev = get_pci_dev(port_base);
if (!pdev)
printk
("%s: warning, failed to get pci_dev structure.\n",
name);
} else
pdev = NULL;
if (pdev && (irq != pdev->irq)) {
printk("%s: IRQ %u mapped to IO-APIC IRQ %u.\n", name, irq,
pdev->irq);
irq = pdev->irq;
}
/* Board detected, allocate its IRQ */
if (request_irq(irq, do_interrupt_handler,
(subversion == ESA) ? IRQF_SHARED : 0,
driver_name, (void *)&sha[j])) {
printk("%s: unable to allocate IRQ %u, detaching.\n", name,
irq);
goto freelock;
}
if (subversion == ISA && request_dma(dma_channel, driver_name)) {
printk("%s: unable to allocate DMA channel %u, detaching.\n",
name, dma_channel);
goto freeirq;
}
#if defined(FORCE_CONFIG)
{
struct eata_config *cf;
dma_addr_t cf_dma_addr;
cf = pci_zalloc_consistent(pdev, sizeof(struct eata_config),
&cf_dma_addr);
if (!cf) {
printk
("%s: config, pci_alloc_consistent failed, detaching.\n",
name);
goto freedma;
}
/* Set board configuration */
cf->len = (ushort) H2DEV16((ushort) 510);
cf->ocena = 1;
if (do_dma(port_base, cf_dma_addr, SET_CONFIG_DMA)) {
printk
("%s: busy timeout sending configuration, detaching.\n",
name);
pci_free_consistent(pdev, sizeof(struct eata_config),
cf, cf_dma_addr);
goto freedma;
}
}
#endif
sh[j] = shost = scsi_register(tpnt, sizeof(struct hostdata));
if (shost == NULL) {
printk("%s: unable to register host, detaching.\n", name);
goto freedma;
}
shost->io_port = port_base;
shost->unique_id = port_base;
shost->n_io_port = REGION_SIZE;
shost->dma_channel = dma_channel;
shost->irq = irq;
shost->sg_tablesize = (ushort) info.scatt_size;
shost->this_id = (ushort) info.host_addr[3];
shost->can_queue = (ushort) info.queue_size;
shost->cmd_per_lun = MAX_CMD_PER_LUN;
ha = (struct hostdata *)shost->hostdata;
memset(ha, 0, sizeof(struct hostdata));
ha->subversion = subversion;
ha->protocol_rev = protocol_rev;
ha->is_pci = is_pci;
ha->pdev = pdev;
ha->board_number = j;
if (ha->subversion == ESA)
shost->unchecked_isa_dma = 0;
else {
unsigned long flags;
shost->unchecked_isa_dma = 1;
flags = claim_dma_lock();
disable_dma(dma_channel);
clear_dma_ff(dma_channel);
set_dma_mode(dma_channel, DMA_MODE_CASCADE);
enable_dma(dma_channel);
release_dma_lock(flags);
}
strcpy(ha->board_name, name);
/* DPT PM2012 does not allow to detect sg_tablesize correctly */
if (shost->sg_tablesize > MAX_SGLIST || shost->sg_tablesize < 2) {
printk("%s: detect, wrong n. of SG lists %d, fixed.\n",
ha->board_name, shost->sg_tablesize);
shost->sg_tablesize = MAX_SGLIST;
}
/* DPT PM2012 does not allow to detect can_queue correctly */
if (shost->can_queue > MAX_MAILBOXES || shost->can_queue < 2) {
printk("%s: detect, wrong n. of mbox %d, fixed.\n",
ha->board_name, shost->can_queue);
shost->can_queue = MAX_MAILBOXES;
}
if (protocol_rev != 'A') {
if (info.max_chan > 0 && info.max_chan < MAX_CHANNEL)
shost->max_channel = info.max_chan;
if (info.max_id > 7 && info.max_id < MAX_TARGET)
shost->max_id = info.max_id + 1;
if (info.large_sg && shost->sg_tablesize == MAX_SGLIST)
shost->sg_tablesize = MAX_LARGE_SGLIST;
}
if (protocol_rev == 'C') {
if (info.max_lun > 7 && info.max_lun < MAX_LUN)
shost->max_lun = info.max_lun + 1;
}
if (dma_channel == NO_DMA)
sprintf(dma_name, "%s", "BMST");
else
sprintf(dma_name, "DMA %u", dma_channel);
for (i = 0; i < shost->can_queue; i++)
ha->cp[i].cp_dma_addr = pci_map_single(ha->pdev,
&ha->cp[i],
sizeof(struct mscp),
PCI_DMA_BIDIRECTIONAL);
for (i = 0; i < shost->can_queue; i++) {
size_t sz = shost->sg_tablesize *sizeof(struct sg_list);
gfp_t gfp_mask = (shost->unchecked_isa_dma ? GFP_DMA : 0) | GFP_ATOMIC;
ha->cp[i].sglist = kmalloc(sz, gfp_mask);
if (!ha->cp[i].sglist) {
printk
("%s: kmalloc SGlist failed, mbox %d, detaching.\n",
ha->board_name, i);
goto release;
}
}
if (!(ha->sp_cpu_addr = pci_alloc_consistent(ha->pdev,
sizeof(struct mssp),
&ha->sp_dma_addr))) {
printk("%s: pci_alloc_consistent failed, detaching.\n", ha->board_name);
goto release;
}
if (max_queue_depth > MAX_TAGGED_CMD_PER_LUN)
max_queue_depth = MAX_TAGGED_CMD_PER_LUN;
if (max_queue_depth < MAX_CMD_PER_LUN)
max_queue_depth = MAX_CMD_PER_LUN;
if (tag_mode != TAG_DISABLED && tag_mode != TAG_SIMPLE)
tag_mode = TAG_ORDERED;
if (j == 0) {
printk
("EATA/DMA 2.0x: Copyright (C) 1994-2003 Dario Ballabio.\n");
printk
("%s config options -> tm:%d, lc:%c, mq:%d, rs:%c, et:%c, "
"ip:%c, ep:%c, pp:%c.\n", driver_name, tag_mode,
YESNO(linked_comm), max_queue_depth, YESNO(rev_scan),
YESNO(ext_tran), YESNO(isa_probe), YESNO(eisa_probe),
YESNO(pci_probe));
}
printk("%s: 2.0%c, %s 0x%03lx, IRQ %u, %s, SG %d, MB %d.\n",
ha->board_name, ha->protocol_rev, bus_type,
(unsigned long)shost->io_port, shost->irq, dma_name,
shost->sg_tablesize, shost->can_queue);
if (shost->max_id > 8 || shost->max_lun > 8)
printk
("%s: wide SCSI support enabled, max_id %u, max_lun %llu.\n",
ha->board_name, shost->max_id, shost->max_lun);
for (i = 0; i <= shost->max_channel; i++)
printk("%s: SCSI channel %u enabled, host target ID %d.\n",
ha->board_name, i, info.host_addr[3 - i]);
#if defined(DEBUG_DETECT)
printk("%s: Vers. 0x%x, ocs %u, tar %u, trnxfr %u, more %u, SYNC 0x%x, "
"sec. %u, infol %d, cpl %d spl %d.\n", name, info.version,
info.ocsena, info.tarsup, info.trnxfr, info.morsup, info.sync,
info.second, info.data_len, info.cp_len, info.sp_len);
if (protocol_rev == 'B' || protocol_rev == 'C')
printk("%s: isaena %u, forcaddr %u, max_id %u, max_chan %u, "
"large_sg %u, res1 %u.\n", name, info.isaena,
info.forcaddr, info.max_id, info.max_chan, info.large_sg,
info.res1);
if (protocol_rev == 'C')
printk("%s: max_lun %u, m1 %u, idquest %u, pci %u, eisa %u, "
"raidnum %u.\n", name, info.max_lun, info.m1,
info.idquest, info.pci, info.eisa, info.raidnum);
#endif
if (ha->pdev) {
pci_set_master(ha->pdev);
if (pci_set_dma_mask(ha->pdev, DMA_BIT_MASK(32)))
printk("%s: warning, pci_set_dma_mask failed.\n",
ha->board_name);
}
return 1;
freedma:
if (subversion == ISA)
free_dma(dma_channel);
freeirq:
free_irq(irq, &sha[j]);
freelock:
release_region(port_base, REGION_SIZE);
fail:
return 0;
release:
eata2x_release(shost);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 1257 | 64.73% | 24 | 60.00% |
| dario ballabio | dario ballabio | 356 | 18.33% | 3 | 7.50% |
| linus torvalds | linus torvalds | 139 | 7.16% | 3 | 7.50% |
| james bottomley | james bottomley | 110 | 5.66% | 1 | 2.50% |
| christoph hellwig | christoph hellwig | 44 | 2.27% | 2 | 5.00% |
| alan cox | alan cox | 28 | 1.44% | 2 | 5.00% |
| yang hongyang | yang hongyang | 4 | 0.21% | 1 | 2.50% |
| joe perches | joe perches | 1 | 0.05% | 1 | 2.50% |
| hannes reinecke | hannes reinecke | 1 | 0.05% | 1 | 2.50% |
| al viro | al viro | 1 | 0.05% | 1 | 2.50% |
| thomas gleixner | thomas gleixner | 1 | 0.05% | 1 | 2.50% |
| Total | 1942 | 100.00% | 40 | 100.00% |
static void internal_setup(char *str, int *ints)
{
int i, argc = ints[0];
char *cur = str, *pc;
if (argc > 0) {
if (argc > MAX_INT_PARAM)
argc = MAX_INT_PARAM;
for (i = 0; i < argc; i++)
io_port[i] = ints[i + 1];
io_port[i] = 0;
setup_done = 1;
}
while (cur && (pc = strchr(cur, ':'))) {
int val = 0, c = *++pc;
if (c == 'n' || c == 'N')
val = 0;
else if (c == 'y' || c == 'Y')
val = 1;
else
val = (int)simple_strtoul(pc, NULL, 0);
if (!strncmp(cur, "lc:", 3))
linked_comm = val;
else if (!strncmp(cur, "tm:", 3))
tag_mode = val;
else if (!strncmp(cur, "tc:", 3))
tag_mode = val;
else if (!strncmp(cur, "mq:", 3))
max_queue_depth = val;
else if (!strncmp(cur, "ls:", 3))
link_statistics = val;
else if (!strncmp(cur, "et:", 3))
ext_tran = val;
else if (!strncmp(cur, "rs:", 3))
rev_scan = val;
else if (!strncmp(cur, "ip:", 3))
isa_probe = val;
else if (!strncmp(cur, "ep:", 3))
eisa_probe = val;
else if (!strncmp(cur, "pp:", 3))
pci_probe = val;
if ((cur = strchr(cur, ',')))
++cur;
}
return;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 288 | 83.48% | 6 | 66.67% |
| dario ballabio | dario ballabio | 51 | 14.78% | 1 | 11.11% |
| alan cox | alan cox | 3 | 0.87% | 1 | 11.11% |
| christoph hellwig | christoph hellwig | 3 | 0.87% | 1 | 11.11% |
| Total | 345 | 100.00% | 9 | 100.00% |
static int option_setup(char *str)
{
int ints[MAX_INT_PARAM];
char *cur = str;
int i = 1;
while (cur && isdigit(*cur) && i < MAX_INT_PARAM) {
ints[i++] = simple_strtoul(cur, NULL, 0);
if ((cur = strchr(cur, ',')) != NULL)
cur++;
}
ints[0] = i - 1;
internal_setup(cur, ints);
return 1;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 94 | 98.95% | 5 | 83.33% |
| roel kluin | roel kluin | 1 | 1.05% | 1 | 16.67% |
| Total | 95 | 100.00% | 6 | 100.00% |
static void add_pci_ports(void)
{
#if defined(CONFIG_PCI)
unsigned int addr, k;
struct pci_dev *dev = NULL;
for (k = 0; k < MAX_PCI; k++) {
if (!(dev = pci_get_class(PCI_CLASS_STORAGE_SCSI << 8, dev)))
break;
if (pci_enable_device(dev)) {
#if defined(DEBUG_PCI_DETECT)
printk
("%s: detect, bus %d, devfn 0x%x, pci_enable_device failed.\n",
driver_name, dev->bus->number, dev->devfn);
#endif
continue;
}
addr = pci_resource_start(dev, 0);
#if defined(DEBUG_PCI_DETECT)
printk("%s: detect, seq. %d, bus %d, devfn 0x%x, addr 0x%x.\n",
driver_name, k, dev->bus->number, dev->devfn, addr);
#endif
/* Order addresses according to rev_scan value */
io_port[MAX_INT_PARAM + (rev_scan ? (MAX_PCI - k) : (1 + k))] =
addr + PCI_BASE_ADDRESS_0;
}
pci_dev_put(dev);
#endif /* end CONFIG_PCI */
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 124 | 74.70% | 8 | 80.00% |
| linus torvalds | linus torvalds | 36 | 21.69% | 1 | 10.00% |
| greg kroah-hartman | greg kroah-hartman | 6 | 3.61% | 1 | 10.00% |
| Total | 166 | 100.00% | 10 | 100.00% |
static int eata2x_detect(struct scsi_host_template *tpnt)
{
unsigned int j = 0, k;
tpnt->proc_name = "eata2x";
if (strlen(boot_options))
option_setup(boot_options);
#if defined(MODULE)
/* io_port could have been modified when loading as a module */
if (io_port[0] != SKIP) {
setup_done = 1;
io_port[MAX_INT_PARAM] = 0;
}
#endif
for (k = MAX_INT_PARAM; io_port[k]; k++)
if (io_port[k] == SKIP)
continue;
else if (io_port[k] <= MAX_ISA_ADDR) {
if (!isa_probe)
io_port[k] = SKIP;
} else if (io_port[k] >= MIN_EISA_ADDR
&& io_port[k] <= MAX_EISA_ADDR) {
if (!eisa_probe)
io_port[k] = SKIP;
}
if (pci_probe) {
if (!setup_done)
add_pci_ports();
else
enable_pci_ports();
}
for (k = 0; io_port[k]; k++) {
if (io_port[k] == SKIP)
continue;
if (j < MAX_BOARDS && port_detect(io_port[k], j, tpnt))
j++;
}
num_boards = j;
return j;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 127 | 57.99% | 8 | 66.67% |
| dario ballabio | dario ballabio | 88 | 40.18% | 2 | 16.67% |
| christoph hellwig | christoph hellwig | 3 | 1.37% | 1 | 8.33% |
| alan cox | alan cox | 1 | 0.46% | 1 | 8.33% |
| Total | 219 | 100.00% | 12 | 100.00% |
static void map_dma(unsigned int i, struct hostdata *ha)
{
unsigned int k, pci_dir;
int count;
struct scatterlist *sg;
struct mscp *cpp;
struct scsi_cmnd *SCpnt;
cpp = &ha->cp[i];
SCpnt = cpp->SCpnt;
pci_dir = SCpnt->sc_data_direction;
if (SCpnt->sense_buffer)
cpp->sense_addr =
H2DEV(pci_map_single(ha->pdev, SCpnt->sense_buffer,
SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE));
cpp->sense_len = SCSI_SENSE_BUFFERSIZE;
if (!scsi_sg_count(SCpnt)) {
cpp->data_len = 0;
return;
}
count = pci_map_sg(ha->pdev, scsi_sglist(SCpnt), scsi_sg_count(SCpnt),
pci_dir);
BUG_ON(!count);
scsi_for_each_sg(SCpnt, sg, count, k) {
cpp->sglist[k].address = H2DEV(sg_dma_address(sg));
cpp->sglist[k].num_bytes = H2DEV(sg_dma_len(sg));
}
cpp->sg = 1;
cpp->data_address = H2DEV(pci_map_single(ha->pdev, cpp->sglist,
scsi_sg_count(SCpnt) *
sizeof(struct sg_list),
pci_dir));
cpp->data_len = H2DEV((scsi_sg_count(SCpnt) * sizeof(struct sg_list)));
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| linus torvalds | linus torvalds | 126 | 52.07% | 1 | 11.11% |
| fujita tomonori | fujita tomonori | 55 | 22.73% | 3 | 33.33% |
| pre-git | pre-git | 33 | 13.64% | 2 | 22.22% |
| dario ballabio | dario ballabio | 18 | 7.44% | 1 | 11.11% |
| james bottomley | james bottomley | 7 | 2.89% | 1 | 11.11% |
| christoph hellwig | christoph hellwig | 3 | 1.24% | 1 | 11.11% |
| Total | 242 | 100.00% | 9 | 100.00% |
static void unmap_dma(unsigned int i, struct hostdata *ha)
{
unsigned int pci_dir;
struct mscp *cpp;
struct scsi_cmnd *SCpnt;
cpp = &ha->cp[i];
SCpnt = cpp->SCpnt;
pci_dir = SCpnt->sc_data_direction;
if (DEV2H(cpp->sense_addr))
pci_unmap_single(ha->pdev, DEV2H(cpp->sense_addr),
DEV2H(cpp->sense_len), PCI_DMA_FROMDEVICE);
if (scsi_sg_count(SCpnt))
pci_unmap_sg(ha->pdev, scsi_sglist(SCpnt), scsi_sg_count(SCpnt),
pci_dir);
if (!DEV2H(cpp->data_len))
pci_dir = PCI_DMA_BIDIRECTIONAL;
if (DEV2H(cpp->data_address))
pci_unmap_single(ha->pdev, DEV2H(cpp->data_address),
DEV2H(cpp->data_len), pci_dir);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| linus torvalds | linus torvalds | 114 | 73.55% | 1 | 20.00% |
| fujita tomonori | fujita tomonori | 22 | 14.19% | 1 | 20.00% |
| dario ballabio | dario ballabio | 10 | 6.45% | 1 | 20.00% |
| james bottomley | james bottomley | 7 | 4.52% | 1 | 20.00% |
| christoph hellwig | christoph hellwig | 2 | 1.29% | 1 | 20.00% |
| Total | 155 | 100.00% | 5 | 100.00% |
static void sync_dma(unsigned int i, struct hostdata *ha)
{
unsigned int pci_dir;
struct mscp *cpp;
struct scsi_cmnd *SCpnt;
cpp = &ha->cp[i];
SCpnt = cpp->SCpnt;
pci_dir = SCpnt->sc_data_direction;
if (DEV2H(cpp->sense_addr))
pci_dma_sync_single_for_cpu(ha->pdev, DEV2H(cpp->sense_addr),
DEV2H(cpp->sense_len),
PCI_DMA_FROMDEVICE);
if (scsi_sg_count(SCpnt))
pci_dma_sync_sg_for_cpu(ha->pdev, scsi_sglist(SCpnt),
scsi_sg_count(SCpnt), pci_dir);
if (!DEV2H(cpp->data_len))
pci_dir = PCI_DMA_BIDIRECTIONAL;
if (DEV2H(cpp->data_address))
pci_dma_sync_single_for_cpu(ha->pdev,
DEV2H(cpp->data_address),
DEV2H(cpp->data_len), pci_dir);
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| linus torvalds | linus torvalds | 123 | 79.35% | 1 | 16.67% |
| dario ballabio | dario ballabio | 10 | 6.45% | 1 | 16.67% |
| fujita tomonori | fujita tomonori | 9 | 5.81% | 1 | 16.67% |
| james bottomley | james bottomley | 8 | 5.16% | 1 | 16.67% |
| andrew morton | andrew morton | 3 | 1.94% | 1 | 16.67% |
| christoph hellwig | christoph hellwig | 2 | 1.29% | 1 | 16.67% |
| Total | 155 | 100.00% | 6 | 100.00% |
static void scsi_to_dev_dir(unsigned int i, struct hostdata *ha)
{
unsigned int k;
static const unsigned char data_out_cmds[] = {
0x0a, 0x2a, 0x15, 0x55, 0x04, 0x07, 0x18, 0x1d, 0x24, 0x2e,
0x30, 0x31, 0x32, 0x38, 0x39, 0x3a, 0x3b, 0x3d, 0x3f, 0x40,
0x41, 0x4c, 0xaa, 0xae, 0xb0, 0xb1, 0xb2, 0xb6, 0xea, 0x1b, 0x5d
};
static const unsigned char data_none_cmds[] = {
0x01, 0x0b, 0x10, 0x11, 0x13, 0x16, 0x17, 0x19, 0x2b, 0x1e,
0x2c, 0xac, 0x2f, 0xaf, 0x33, 0xb3, 0x35, 0x36, 0x45, 0x47,
0x48, 0x49, 0xa9, 0x4b, 0xa5, 0xa6, 0xb5, 0x00
};
struct mscp *cpp;
struct scsi_cmnd *SCpnt;
cpp = &ha->cp[i];
SCpnt = cpp->SCpnt;
if (SCpnt->sc_data_direction == DMA_FROM_DEVICE) {
cpp->din = 1;
cpp->dout = 0;
return;
} else if (SCpnt->sc_data_direction == DMA_TO_DEVICE) {
cpp->din = 0;
cpp->dout = 1;
return;
} else if (SCpnt->sc_data_direction == DMA_NONE) {
cpp->din = 0;
cpp->dout = 0;
return;
}
if (SCpnt->sc_data_direction != DMA_BIDIRECTIONAL)
panic("%s: qcomm, invalid SCpnt->sc_data_direction.\n",
ha->board_name);
for (k = 0; k < ARRAY_SIZE(data_out_cmds); k++)
if (SCpnt->cmnd[0] == data_out_cmds[k]) {
cpp->dout = 1;
break;
}
if ((cpp->din = !cpp->dout))
for (k = 0; k < ARRAY_SIZE(data_none_cmds); k++)
if (SCpnt->cmnd[0] == data_none_cmds[k]) {
cpp->din = 0;
break;
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| linus torvalds | linus torvalds | 336 | 93.33% | 1 | 25.00% |
| christoph hellwig | christoph hellwig | 14 | 3.89% | 1 | 25.00% |
| james bottomley | james bottomley | 8 | 2.22% | 1 | 25.00% |
| pre-git | pre-git | 2 | 0.56% | 1 | 25.00% |
| Total | 360 | 100.00% | 4 | 100.00% |
static int eata2x_queuecommand_lck(struct scsi_cmnd *SCpnt,
void (*done) (struct scsi_cmnd *))
{
struct Scsi_Host *shost = SCpnt->device->host;
struct hostdata *ha = (struct hostdata *)shost->hostdata;
unsigned int i, k;
struct mscp *cpp;
if (SCpnt->host_scribble)
panic("%s: qcomm, SCpnt %p already active.\n",
ha->board_name, SCpnt);
/* i is the mailbox number, look for the first free mailbox
starting from last_cp_used */
i = ha->last_cp_used + 1;
for (k = 0; k < shost->can_queue; k++, i++) {
if (i >= shost->can_queue)
i = 0;
if (ha->cp_stat[i] == FREE) {
ha->last_cp_used = i;
break;
}
}
if (k == shost->can_queue) {
printk("%s: qcomm, no free mailbox.\n", ha->board_name);
return 1;
}
/* Set pointer to control packet structure */
cpp = &ha->cp[i];
memset(cpp, 0, sizeof(struct mscp) - CP_TAIL_SIZE);
/* Set pointer to status packet structure, Big Endian format */
cpp->sp_dma_addr = H2DEV(ha->sp_dma_addr);
SCpnt->scsi_done = done;
cpp->cpp_index = i;
SCpnt->host_scribble = (unsigned char *)&cpp->cpp_index;
if (do_trace)
scmd_printk(KERN_INFO, SCpnt,
"qcomm, mbox %d.\n", i);
cpp->reqsen = 1;
cpp->dispri = 1;
#if 0
if (SCpnt->device->type == TYPE_TAPE)
cpp->hbaci = 1;
#endif
cpp->one = 1;
cpp->channel = SCpnt->device->channel;
cpp->target = SCpnt->device->id;
cpp->lun = SCpnt->device->lun;
cpp->SCpnt = SCpnt;
memcpy(cpp->cdb, SCpnt->cmnd, SCpnt->cmd_len);
/* Use data transfer direction SCpnt->sc_data_direction */
scsi_to_dev_dir(i, ha);
/* Map DMA buffers and SG list */
map_dma(i, ha);
if (linked_comm && SCpnt->device->queue_depth > 2
&& TLDEV(SCpnt->device->type)) {
ha->cp_stat[i] = READY;
flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 0);
return 0;
}
/* Send control packet to the board */
if (do_dma(shost->io_port, cpp->cp_dma_addr, SEND_CP_DMA)) {
unmap_dma(i, ha);
SCpnt->host_scribble = NULL;
scmd_printk(KERN_INFO, SCpnt, "qcomm, adapter busy.\n");
return 1;
}
ha->cp_stat[i] = IN_USE;
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 310 | 71.10% | 9 | 42.86% |
| james bottomley | james bottomley | 46 | 10.55% | 1 | 4.76% |
| linus torvalds | linus torvalds | 41 | 9.40% | 1 | 4.76% |
| christoph hellwig | christoph hellwig | 14 | 3.21% | 4 | 19.05% |
| luben tuikov | luben tuikov | 7 | 1.61% | 1 | 4.76% |
| alan cox | alan cox | 6 | 1.38% | 1 | 4.76% |
| jeff garzik | jeff garzik | 6 | 1.38% | 2 | 9.52% |
| tejun heo | tejun heo | 3 | 0.69% | 1 | 4.76% |
| dario ballabio | dario ballabio | 3 | 0.69% | 1 | 4.76% |
| Total | 436 | 100.00% | 21 | 100.00% |
static DEF_SCSI_QCMD(eata2x_queuecommand)
static int eata2x_eh_abort(struct scsi_cmnd *SCarg)
{
struct Scsi_Host *shost = SCarg->device->host;
struct hostdata *ha = (struct hostdata *)shost->hostdata;
unsigned int i;
if (SCarg->host_scribble == NULL) {
scmd_printk(KERN_INFO, SCarg, "abort, cmd inactive.\n");
return SUCCESS;
}
i = *(unsigned int *)SCarg->host_scribble;
scmd_printk(KERN_WARNING, SCarg, "abort, mbox %d.\n", i);
if (i >= shost->can_queue)
panic("%s: abort, invalid SCarg->host_scribble.\n", ha->board_name);
if (wait_on_busy(shost->io_port, MAXLOOP)) {
printk("%s: abort, timeout error.\n", ha->board_name);
return FAILED;
}
if (ha->cp_stat[i] == FREE) {
printk("%s: abort, mbox %d is free.\n", ha->board_name, i);
return SUCCESS;
}
if (ha->cp_stat[i] == IN_USE) {
printk("%s: abort, mbox %d is in use.\n", ha->board_name, i);
if (SCarg != ha->cp[i].SCpnt)
panic("%s: abort, mbox %d, SCarg %p, cp SCpnt %p.\n",
ha->board_name, i, SCarg, ha->cp[i].SCpnt);
if (inb(shost->io_port + REG_AUX_STATUS) & IRQ_ASSERTED)
printk("%s: abort, mbox %d, interrupt pending.\n",
ha->board_name, i);
return FAILED;
}
if (ha->cp_stat[i] == IN_RESET) {
printk("%s: abort, mbox %d is in reset.\n", ha->board_name, i);
return FAILED;
}
if (ha->cp_stat[i] == LOCKED) {
printk("%s: abort, mbox %d is locked.\n", ha->board_name, i);
return SUCCESS;
}
if (ha->cp_stat[i] == READY || ha->cp_stat[i] == ABORTING) {
unmap_dma(i, ha);
SCarg->result = DID_ABORT << 16;
SCarg->host_scribble = NULL;
ha->cp_stat[i] = FREE;
printk("%s, abort, mbox %d ready, DID_ABORT, done.\n",
ha->board_name, i);
SCarg->scsi_done(SCarg);
return SUCCESS;
}
panic("%s: abort, mbox %d, invalid cp_stat.\n", ha->board_name, i);
}
static
int eata2x_eh_host_reset(struct scsi_cmnd *SCarg)
{
unsigned int i, time, k, c, limit = 0;
int arg_done = 0;
struct scsi_cmnd *SCpnt;
struct Scsi_Host *shost = SCarg->device->host;
struct hostdata *ha = (struct hostdata *)shost->hostdata;
scmd_printk(KERN_INFO, SCarg, "reset, enter.\n");
spin_lock_irq(shost->host_lock);
if (SCarg->host_scribble == NULL)
printk("%s: reset, inactive.\n", ha->board_name);
if (ha->in_reset) {
printk("%s: reset, exit, already in reset.\n", ha->board_name);
spin_unlock_irq(shost->host_lock);
return FAILED;
}
if (wait_on_busy(shost->io_port, MAXLOOP)) {
printk("%s: reset, exit, timeout error.\n", ha->board_name);
spin_unlock_irq(shost->host_lock);
return FAILED;
}
ha->retries = 0;
for (c = 0; c <= shost->max_channel; c++)
for (k = 0; k < shost->max_id; k++) {
ha->target_redo[k][c] = 1;
ha->target_to[k][c] = 0;
}
for (i = 0; i < shost->can_queue; i++) {
if (ha->cp_stat[i] == FREE)
continue;
if (ha->cp_stat[i] == LOCKED) {
ha->cp_stat[i] = FREE;
printk("%s: reset, locked mbox %d forced free.\n",
ha->board_name, i);
continue;
}
if (!(SCpnt = ha->cp[i].SCpnt))
panic("%s: reset, mbox %d, SCpnt == NULL.\n", ha->board_name, i);
if (ha->cp_stat[i] == READY || ha->cp_stat[i] == ABORTING) {
ha->cp_stat[i] = ABORTING;
printk("%s: reset, mbox %d aborting.\n",
ha->board_name, i);
}
else {
ha->cp_stat[i] = IN_RESET;
printk("%s: reset, mbox %d in reset.\n",
ha->board_name, i);
}
if (SCpnt->host_scribble == NULL)
panic("%s: reset, mbox %d, garbled SCpnt.\n", ha->board_name, i);
if (*(unsigned int *)SCpnt->host_scribble != i)
panic("%s: reset, mbox %d, index mismatch.\n", ha->board_name, i);
if (SCpnt->scsi_done == NULL)
panic("%s: reset, mbox %d, SCpnt->scsi_done == NULL.\n",
ha->board_name, i);
if (SCpnt == SCarg)
arg_done = 1;
}
if (do_dma(shost->io_port, 0, RESET_PIO)) {
printk("%s: reset, cannot reset, timeout error.\n", ha->board_name);
spin_unlock_irq(shost->host_lock);
return FAILED;
}
printk("%s: reset, board reset done, enabling interrupts.\n", ha->board_name);
#if defined(DEBUG_RESET)
do_trace = 1;
#endif
ha->in_reset = 1;
spin_unlock_irq(shost->host_lock);
/* FIXME: use a sleep instead */
time = jiffies;
while ((jiffies - time) < (10 * HZ) && limit++ < 200000)
udelay(100L);
spin_lock_irq(shost->host_lock);
printk("%s: reset, interrupts disabled, loops %d.\n", ha->board_name, limit);
for (i = 0; i < shost->can_queue; i++) {
if (ha->cp_stat[i] == IN_RESET) {
SCpnt = ha->cp[i].SCpnt;
unmap_dma(i, ha);
SCpnt->result = DID_RESET << 16;
SCpnt->host_scribble = NULL;
/* This mailbox is still waiting for its interrupt */
ha->cp_stat[i] = LOCKED;
printk
("%s, reset, mbox %d locked, DID_RESET, done.\n",
ha->board_name, i);
}
else if (ha->cp_stat[i] == ABORTING) {
SCpnt = ha->cp[i].SCpnt;
unmap_dma(i, ha);
SCpnt->result = DID_RESET << 16;
SCpnt->host_scribble = NULL;
/* This mailbox was never queued to the adapter */
ha->cp_stat[i] = FREE;
printk
("%s, reset, mbox %d aborting, DID_RESET, done.\n",
ha->board_name, i);
}
else
/* Any other mailbox has already been set free by interrupt */
continue;
SCpnt->scsi_done(SCpnt);
}
ha->in_reset = 0;
do_trace = 0;
if (arg_done)
printk("%s: reset, exit, done.\n", ha->board_name);
else
printk("%s: reset, exit.\n", ha->board_name);
spin_unlock_irq(shost->host_lock);
return SUCCESS;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 575 | 75.66% | 12 | 54.55% |
| james bottomley | james bottomley | 98 | 12.89% | 1 | 4.55% |
| jeff garzik | jeff garzik | 39 | 5.13% | 3 | 13.64% |
| linus torvalds | linus torvalds | 27 | 3.55% | 2 | 9.09% |
| christoph hellwig | christoph hellwig | 18 | 2.37% | 2 | 9.09% |
| luben tuikov | luben tuikov | 2 | 0.26% | 1 | 4.55% |
| alan cox | alan cox | 1 | 0.13% | 1 | 4.55% |
| Total | 760 | 100.00% | 22 | 100.00% |
int eata2x_bios_param(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int *dkinfo)
{
unsigned int size = capacity;
if (ext_tran || (scsicam_bios_param(bdev, capacity, dkinfo) < 0)) {
dkinfo[0] = 255;
dkinfo[1] = 63;
dkinfo[2] = size / (dkinfo[0] * dkinfo[1]);
}
#if defined (DEBUG_GEOMETRY)
printk("%s: bios_param, head=%d, sec=%d, cyl=%d.\n", driver_name,
dkinfo[0], dkinfo[1], dkinfo[2]);
#endif
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 95 | 84.07% | 1 | 14.29% |
| christoph hellwig | christoph hellwig | 8 | 7.08% | 2 | 28.57% |
| alan cox | alan cox | 5 | 4.42% | 2 | 28.57% |
| al viro | al viro | 4 | 3.54% | 1 | 14.29% |
| dario ballabio | dario ballabio | 1 | 0.88% | 1 | 14.29% |
| Total | 113 | 100.00% | 7 | 100.00% |
static void sort(unsigned long sk[], unsigned int da[], unsigned int n,
unsigned int rev)
{
unsigned int i, j, k, y;
unsigned long x;
for (i = 0; i < n - 1; i++) {
k = i;
for (j = k + 1; j < n; j++)
if (rev) {
if (sk[j] > sk[k])
k = j;
} else {
if (sk[j] < sk[k])
k = j;
}
if (k != i) {
x = sk[k];
sk[k] = sk[i];
sk[i] = x;
y = da[k];
da[k] = da[i];
da[i] = y;
}
}
return;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 172 | 100.00% | 1 | 100.00% |
| Total | 172 | 100.00% | 1 | 100.00% |
static int reorder(struct hostdata *ha, unsigned long cursec,
unsigned int ihdlr, unsigned int il[], unsigned int n_ready)
{
struct scsi_cmnd *SCpnt;
struct mscp *cpp;
unsigned int k, n;
unsigned int rev = 0, s = 1, r = 1;
unsigned int input_only = 1, overlap = 0;
unsigned long sl[n_ready], pl[n_ready], ll[n_ready];
unsigned long maxsec = 0, minsec = ULONG_MAX, seek = 0, iseek = 0;
unsigned long ioseek = 0;
static unsigned int flushcount = 0, batchcount = 0, sortcount = 0;
static unsigned int readycount = 0, ovlcount = 0, inputcount = 0;
static unsigned int readysorted = 0, revcount = 0;
static unsigned long seeksorted = 0, seeknosort = 0;
if (link_statistics && !(++flushcount % link_statistics))
printk("fc %d bc %d ic %d oc %d rc %d rs %d sc %d re %d"
" av %ldK as %ldK.\n", flushcount, batchcount,
inputcount, ovlcount, readycount, readysorted, sortcount,
revcount, seeknosort / (readycount + 1),
seeksorted / (readycount + 1));
if (n_ready <= 1)
return 0;
for (n = 0; n < n_ready; n++) {
k = il[n];
cpp = &ha->cp[k];
SCpnt = cpp->SCpnt;
if (!cpp->din)
input_only = 0;
if (blk_rq_pos(SCpnt->request) < minsec)
minsec = blk_rq_pos(SCpnt->request);
if (blk_rq_pos(SCpnt->request) > maxsec)
maxsec = blk_rq_pos(SCpnt->request);
sl[n] = blk_rq_pos(SCpnt->request);
ioseek += blk_rq_sectors(SCpnt->request);
if (!n)
continue;
if (sl[n] < sl[n - 1])
s = 0;
if (sl[n] > sl[n - 1])
r = 0;
if (link_statistics) {
if (sl[n] > sl[n - 1])
seek += sl[n] - sl[n - 1];
else
seek += sl[n - 1] - sl[n];
}
}
if (link_statistics) {
if (cursec > sl[0])
seek += cursec - sl[0];
else
seek += sl[0] - cursec;
}
if (cursec > ((maxsec + minsec) / 2))
rev = 1;
if (ioseek > ((maxsec - minsec) / 2))
rev = 0;
if (!((rev && r) || (!rev && s)))
sort(sl, il, n_ready, rev);
if (!input_only)
for (n = 0; n < n_ready; n++) {
k = il[n];
cpp = &ha->cp[k];
SCpnt = cpp->SCpnt;
ll[n] = blk_rq_sectors(SCpnt->request);
pl[n] = SCpnt->serial_number;
if (!n)
continue;
if ((sl[n] == sl[n - 1])
|| (!rev && ((sl[n - 1] + ll[n - 1]) > sl[n]))
|| (rev && ((sl[n] + ll[n]) > sl[n - 1])))
overlap = 1;
}
if (overlap)
sort(pl, il, n_ready, 0);
if (link_statistics) {
if (cursec > sl[0])
iseek = cursec - sl[0];
else
iseek = sl[0] - cursec;
batchcount++;
readycount += n_ready;
seeknosort += seek / 1024;
if (input_only)
inputcount++;
if (overlap) {
ovlcount++;
seeksorted += iseek / 1024;
} else
seeksorted += (iseek + maxsec - minsec) / 1024;
if (rev && !r) {
revcount++;
readysorted += n_ready;
}
if (!rev && !s) {
sortcount++;
readysorted += n_ready;
}
}
#if defined(DEBUG_LINKED_COMMANDS)
if (link_statistics && (overlap || !(flushcount % link_statistics)))
for (n = 0; n < n_ready; n++) {
k = il[n];
cpp = &ha->cp[k];
SCpnt = cpp->SCpnt;
scmd_printk(KERN_INFO, SCpnt,
"%s mb %d fc %d nr %d sec %ld ns %u"
" cur %ld s:%c r:%c rev:%c in:%c ov:%c xd %d.\n",
(ihdlr ? "ihdlr" : "qcomm"),
k, flushcount,
n_ready, blk_rq_pos(SCpnt->request),
blk_rq_sectors(SCpnt->request), cursec, YESNO(s),
YESNO(r), YESNO(rev), YESNO(input_only),
YESNO(overlap), cpp->din);
}
#endif
return overlap;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 870 | 93.95% | 6 | 50.00% |
| tejun heo | tejun heo | 27 | 2.92% | 1 | 8.33% |
| christoph hellwig | christoph hellwig | 16 | 1.73% | 2 | 16.67% |
| james bottomley | james bottomley | 7 | 0.76% | 1 | 8.33% |
| jeff garzik | jeff garzik | 5 | 0.54% | 1 | 8.33% |
| matthew wilcox | matthew wilcox | 1 | 0.11% | 1 | 8.33% |
| Total | 926 | 100.00% | 12 | 100.00% |
static void flush_dev(struct scsi_device *dev, unsigned long cursec,
struct hostdata *ha, unsigned int ihdlr)
{
struct scsi_cmnd *SCpnt;
struct mscp *cpp;
unsigned int k, n, n_ready = 0, il[MAX_MAILBOXES];
for (k = 0; k < dev->host->can_queue; k++) {
if (ha->cp_stat[k] != READY && ha->cp_stat[k] != IN_USE)
continue;
cpp = &ha->cp[k];
SCpnt = cpp->SCpnt;
if (SCpnt->device != dev)
continue;
if (ha->cp_stat[k] == IN_USE)
return;
il[n_ready++] = k;
}
if (reorder(ha, cursec, ihdlr, il, n_ready))
n_ready = 1;
for (n = 0; n < n_ready; n++) {
k = il[n];
cpp = &ha->cp[k];
SCpnt = cpp->SCpnt;
if (do_dma(dev->host->io_port, cpp->cp_dma_addr, SEND_CP_DMA)) {
scmd_printk(KERN_INFO, SCpnt,
"%s, mbox %d, adapter"
" busy, will abort.\n",
(ihdlr ? "ihdlr" : "qcomm"),
k);
ha->cp_stat[k] = ABORTING;
continue;
}
ha->cp_stat[k] = IN_USE;
}
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 219 | 87.95% | 3 | 37.50% |
| james bottomley | james bottomley | 18 | 7.23% | 1 | 12.50% |
| christoph hellwig | christoph hellwig | 5 | 2.01% | 2 | 25.00% |
| jeff garzik | jeff garzik | 5 | 2.01% | 1 | 12.50% |
| dario ballabio | dario ballabio | 2 | 0.80% | 1 | 12.50% |
| Total | 249 | 100.00% | 8 | 100.00% |
static irqreturn_t ihdlr(struct Scsi_Host *shost)
{
struct scsi_cmnd *SCpnt;
unsigned int i, k, c, status, tstatus, reg;
struct mssp *spp;
struct mscp *cpp;
struct hostdata *ha = (struct hostdata *)shost->hostdata;
int irq = shost->irq;
/* Check if this board need to be serviced */
if (!(inb(shost->io_port + REG_AUX_STATUS) & IRQ_ASSERTED))
goto none;
ha->iocount++;
if (do_trace)
printk("%s: ihdlr, enter, irq %d, count %d.\n", ha->board_name, irq,
ha->iocount);
/* Check if this board is still busy */
if (wait_on_busy(shost->io_port, 20 * MAXLOOP)) {
reg = inb(shost->io_port + REG_STATUS);
printk
("%s: ihdlr, busy timeout error, irq %d, reg 0x%x, count %d.\n",
ha->board_name, irq, reg, ha->iocount);
goto none;
}
spp = &ha->sp;
/* Make a local copy just before clearing the interrupt indication */
memcpy(spp, ha->sp_cpu_addr, sizeof(struct mssp));
/* Clear the completion flag and cp pointer on the dynamic copy of sp */
memset(ha->sp_cpu_addr, 0, sizeof(struct mssp));
/* Read the status register to clear the interrupt indication */
reg = inb(shost->io_port + REG_STATUS);
#if defined (DEBUG_INTERRUPT)
{
unsigned char *bytesp;
int cnt;
bytesp = (unsigned char *)spp;
if (ha->iocount < 200) {
printk("sp[] =");
for (cnt = 0; cnt < 15; cnt++)
printk(" 0x%x", bytesp[cnt]);
printk("\n");
}
}
#endif
/* Reject any sp with supspect data */
if (spp->eoc == 0 && ha->iocount > 1)
printk
("%s: ihdlr, spp->eoc == 0, irq %d, reg 0x%x, count %d.\n",
ha->board_name, irq, reg, ha->iocount);
if (spp->cpp_index < 0 || spp->cpp_index >= shost->can_queue)
printk
("%s: ihdlr, bad spp->cpp_index %d, irq %d, reg 0x%x, count %d.\n",
ha->board_name, spp->cpp_index, irq, reg, ha->iocount);
if (spp->eoc == 0 || spp->cpp_index < 0
|| spp->cpp_index >= shost->can_queue)
goto handled;
/* Find the mailbox to be serviced on this board */
i = spp->cpp_index;
cpp = &(ha->cp[i]);
#if defined(DEBUG_GENERATE_ABORTS)
if ((ha->iocount > 500) && ((ha->iocount % 500) < 3))
goto handled;
#endif
if (ha->cp_stat[i] == IGNORE) {
ha->cp_stat[i] = FREE;
goto handled;
} else if (ha->cp_stat[i] == LOCKED) {
ha->cp_stat[i] = FREE;
printk("%s: ihdlr, mbox %d unlocked, count %d.\n", ha->board_name, i,
ha->iocount);
goto handled;
} else if (ha->cp_stat[i] == FREE) {
printk("%s: ihdlr, mbox %d is free, count %d.\n", ha->board_name, i,
ha->iocount);
goto handled;
} else if (ha->cp_stat[i] == IN_RESET)
printk("%s: ihdlr, mbox %d is in reset.\n", ha->board_name, i);
else if (ha->cp_stat[i] != IN_USE)
panic("%s: ihdlr, mbox %d, invalid cp_stat: %d.\n",
ha->board_name, i, ha->cp_stat[i]);
ha->cp_stat[i] = FREE;
SCpnt = cpp->SCpnt;
if (SCpnt == NULL)
panic("%s: ihdlr, mbox %d, SCpnt == NULL.\n", ha->board_name, i);
if (SCpnt->host_scribble == NULL)
panic("%s: ihdlr, mbox %d, SCpnt %p garbled.\n", ha->board_name,
i, SCpnt);
if (*(unsigned int *)SCpnt->host_scribble != i)
panic("%s: ihdlr, mbox %d, index mismatch %d.\n",
ha->board_name, i,
*(unsigned int *)SCpnt->host_scribble);
sync_dma(i, ha);
if (linked_comm && SCpnt->device->queue_depth > 2
&& TLDEV(SCpnt->device->type))
flush_dev(SCpnt->device, blk_rq_pos(SCpnt->request), ha, 1);
tstatus = status_byte(spp->target_status);
#if defined(DEBUG_GENERATE_ERRORS)
if ((ha->iocount > 500) && ((ha->iocount % 200) < 2))
spp->adapter_status = 0x01;
#endif
switch (spp->adapter_status) {
case ASOK: /* status OK */
/* Forces a reset if a disk drive keeps returning BUSY */
if (tstatus == BUSY && SCpnt->device->type != TYPE_TAPE)
status = DID_ERROR << 16;
/* If there was a bus reset, redo operation on each target */
else if (tstatus != GOOD && SCpnt->device->type == TYPE_DISK
&& ha->target_redo[SCpnt->device->id][SCpnt->
device->
channel])
status = DID_BUS_BUSY << 16;
/* Works around a flaw in scsi.c */
else if (tstatus == CHECK_CONDITION
&& SCpnt->device->type == TYPE_DISK
&& (SCpnt->sense_buffer[2] & 0xf) == RECOVERED_ERROR)
status = DID_BUS_BUSY << 16;
else
status = DID_OK << 16;
if (tstatus == GOOD)
ha->target_redo[SCpnt->device->id][SCpnt->device->
channel] = 0;
if (spp->target_status && SCpnt->device->type == TYPE_DISK &&
(!(tstatus == CHECK_CONDITION && ha->iocount <= 1000 &&
(SCpnt->sense_buffer[2] & 0xf) == NOT_READY)))
printk("%s: ihdlr, target %d.%d:%d, "
"target_status 0x%x, sense key 0x%x.\n",
ha->board_name,
SCpnt->device->channel, SCpnt->device->id,
(u8)SCpnt->device->lun,
spp->target_status, SCpnt->sense_buffer[2]);
ha->target_to[SCpnt->device->id][SCpnt->device->channel] = 0;
if (ha->last_retried_pid == SCpnt->serial_number)
ha->retries = 0;
break;
case ASST: /* Selection Time Out */
case 0x02: /* Command Time Out */
if (ha->target_to[SCpnt->device->id][SCpnt->device->channel] > 1)
status = DID_ERROR << 16;
else {
status = DID_TIME_OUT << 16;
ha->target_to[SCpnt->device->id][SCpnt->device->
channel]++;
}
break;
/* Perform a limited number of internal retries */
case 0x03: /* SCSI Bus Reset Received */
case 0x04: /* Initial Controller Power-up */
for (c = 0; c <= shost->max_channel; c++)
for (k = 0; k < shost->max_id; k++)
ha->target_redo[k][c] = 1;
if (SCpnt->device->type != TYPE_TAPE
&& ha->retries < MAX_INTERNAL_RETRIES) {
#if defined(DID_SOFT_ERROR)
status = DID_SOFT_ERROR << 16;
#else
status = DID_BUS_BUSY << 16;
#endif
ha->retries++;
ha->last_retried_pid = SCpnt->serial_number;
} else
status = DID_ERROR << 16;
break;
case 0x05: /* Unexpected Bus Phase */
case 0x06: /* Unexpected Bus Free */
case 0x07: /* Bus Parity Error */
case 0x08: /* SCSI Hung */
case 0x09: /* Unexpected Message Reject */
case 0x0a: /* SCSI Bus Reset Stuck */
case 0x0b: /* Auto Request-Sense Failed */
case 0x0c: /* Controller Ram Parity Error */
default:
status = DID_ERROR << 16;
break;
}
SCpnt->result = status | spp->target_status;
#if defined(DEBUG_INTERRUPT)
if (SCpnt->result || do_trace)
#else
if ((spp->adapter_status != ASOK && ha->iocount > 1000) ||
(spp->adapter_status != ASOK &&
spp->adapter_status != ASST && ha->iocount <= 1000) ||
do_trace || msg_byte(spp->target_status))
#endif
scmd_printk(KERN_INFO, SCpnt, "ihdlr, mbox %2d, err 0x%x:%x,"
" reg 0x%x, count %d.\n",
i, spp->adapter_status, spp->target_status,
reg, ha->iocount);
unmap_dma(i, ha);
/* Set the command state to inactive */
SCpnt->host_scribble = NULL;
SCpnt->scsi_done(SCpnt);
if (do_trace)
printk("%s: ihdlr, exit, irq %d, count %d.\n", ha->board_name,
irq, ha->iocount);
handled:
return IRQ_HANDLED;
none:
return IRQ_NONE;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 1083 | 78.65% | 14 | 50.00% |
| james bottomley | james bottomley | 111 | 8.06% | 1 | 3.57% |
| alan cox | alan cox | 69 | 5.01% | 1 | 3.57% |
| dario ballabio | dario ballabio | 37 | 2.69% | 2 | 7.14% |
| luben tuikov | luben tuikov | 32 | 2.32% | 1 | 3.57% |
| linus torvalds | linus torvalds | 16 | 1.16% | 1 | 3.57% |
| christoph hellwig | christoph hellwig | 13 | 0.94% | 3 | 10.71% |
| jeff garzik | jeff garzik | 8 | 0.58% | 2 | 7.14% |
| hannes reinecke | hannes reinecke | 3 | 0.22% | 1 | 3.57% |
| tejun heo | tejun heo | 3 | 0.22% | 1 | 3.57% |
| matthew wilcox | matthew wilcox | 2 | 0.15% | 1 | 3.57% |
| Total | 1377 | 100.00% | 28 | 100.00% |
static irqreturn_t do_interrupt_handler(int dummy, void *shap)
{
struct Scsi_Host *shost;
unsigned int j;
unsigned long spin_flags;
irqreturn_t ret;
/* Check if the interrupt must be processed by this handler */
if ((j = (unsigned int)((char *)shap - sha)) >= num_boards)
return IRQ_NONE;
shost = sh[j];
spin_lock_irqsave(shost->host_lock, spin_flags);
ret = ihdlr(shost);
spin_unlock_irqrestore(shost->host_lock, spin_flags);
return ret;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 41 | 45.56% | 3 | 37.50% |
| linus torvalds | linus torvalds | 23 | 25.56% | 1 | 12.50% |
| james bottomley | james bottomley | 13 | 14.44% | 1 | 12.50% |
| dario ballabio | dario ballabio | 6 | 6.67% | 1 | 12.50% |
| andrew morton | andrew morton | 6 | 6.67% | 1 | 12.50% |
| jeff garzik | jeff garzik | 1 | 1.11% | 1 | 12.50% |
| Total | 90 | 100.00% | 8 | 100.00% |
static int eata2x_release(struct Scsi_Host *shost)
{
struct hostdata *ha = (struct hostdata *)shost->hostdata;
unsigned int i;
for (i = 0; i < shost->can_queue; i++)
kfree((&ha->cp[i])->sglist);
for (i = 0; i < shost->can_queue; i++)
pci_unmap_single(ha->pdev, ha->cp[i].cp_dma_addr,
sizeof(struct mscp), PCI_DMA_BIDIRECTIONAL);
if (ha->sp_cpu_addr)
pci_free_consistent(ha->pdev, sizeof(struct mssp),
ha->sp_cpu_addr, ha->sp_dma_addr);
free_irq(shost->irq, &sha[ha->board_number]);
if (shost->dma_channel != NO_DMA)
free_dma(shost->dma_channel);
release_region(shost->io_port, shost->n_io_port);
scsi_unregister(shost);
return 0;
}
Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 80 | 45.98% | 2 | 28.57% |
| dario ballabio | dario ballabio | 36 | 20.69% | 1 | 14.29% |
| james bottomley | james bottomley | 33 | 18.97% | 1 | 14.29% |
| linus torvalds | linus torvalds | 23 | 13.22% | 1 | 14.29% |
| alan cox | alan cox | 1 | 0.57% | 1 | 14.29% |
| christoph hellwig | christoph hellwig | 1 | 0.57% | 1 | 14.29% |
| Total | 174 | 100.00% | 7 | 100.00% |
#include "scsi_module.c"
#ifndef MODULE
__setup("eata=", option_setup);
#endif /* end MODULE */
Overall Contributors
| Person | Tokens | Prop | Commits | CommitProp |
| pre-git | pre-git | 7127 | 65.86% | 37 | 44.05% |
| dario ballabio | dario ballabio | 1174 | 10.85% | 3 | 3.57% |
| linus torvalds | linus torvalds | 1044 | 9.65% | 4 | 4.76% |
| james bottomley | james bottomley | 524 | 4.84% | 1 | 1.19% |
| alan cox | alan cox | 401 | 3.71% | 3 | 3.57% |
| christoph hellwig | christoph hellwig | 225 | 2.08% | 7 | 8.33% |
| jeff garzik | jeff garzik | 89 | 0.82% | 4 | 4.76% |
| fujita tomonori | fujita tomonori | 87 | 0.80% | 4 | 4.76% |
| luben tuikov | luben tuikov | 43 | 0.40% | 2 | 2.38% |
| tejun heo | tejun heo | 36 | 0.33% | 2 | 2.38% |
| doug ledford | doug ledford | 24 | 0.22% | 2 | 2.38% |
| greg kroah-hartman | greg kroah-hartman | 13 | 0.12% | 1 | 1.19% |
| andrew morton | andrew morton | 10 | 0.09% | 2 | 2.38% |
| al viro | al viro | 5 | 0.05% | 2 | 2.38% |
| hannes reinecke | hannes reinecke | 4 | 0.04% | 2 | 2.38% |
| yang hongyang | yang hongyang | 4 | 0.04% | 1 | 1.19% |
| matthew wilcox | matthew wilcox | 3 | 0.03% | 1 | 1.19% |
| matthias gehre | matthias gehre | 3 | 0.03% | 1 | 1.19% |
| thomas gleixner | thomas gleixner | 1 | 0.01% | 1 | 1.19% |
| roel kluin | roel kluin | 1 | 0.01% | 1 | 1.19% |
| joe perches | joe perches | 1 | 0.01% | 1 | 1.19% |
| arjan van de ven | arjan van de ven | 1 | 0.01% | 1 | 1.19% |
| lucas de marchi | lucas de marchi | 1 | 0.01% | 1 | 1.19% |
| Total | 10821 | 100.00% | 84 | 100.00% |
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.