cregit-Linux how code gets into the kernel

Release 4.7 drivers/staging/rtl8712/rtl871x_led.h

/******************************************************************************
 *
 * Copyright(c) 2007 - 2010 Realtek Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but WITHOUT
 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
 * more details.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
 *
 * Modifications for inclusion into the Linux staging tree are
 * Copyright(c) 2010 Larry Finger. All rights reserved.
 *
 * Contact information:
 * WLAN FAE <wlanfae@realtek.com>
 * Larry Finger <Larry.Finger@lwfinger.net>
 *
 ******************************************************************************/
#ifndef __RTL8712_LED_H

#define __RTL8712_LED_H

#include "osdep_service.h"
#include "drv_types.h"

/*===========================================================================
 * LED customization.
 *===========================================================================
 */

enum LED_CTL_MODE {
	
LED_CTL_POWER_ON = 1,
	
LED_CTL_LINK = 2,
	
LED_CTL_NO_LINK = 3,
	
LED_CTL_TX = 4,
	
LED_CTL_RX = 5,
	
LED_CTL_SITE_SURVEY = 6,
	
LED_CTL_POWER_OFF = 7,
	
LED_CTL_START_TO_LINK = 8,
	
LED_CTL_START_WPS = 9,
	
LED_CTL_STOP_WPS = 10,
	
LED_CTL_START_WPS_BOTTON = 11,
	
LED_CTL_STOP_WPS_FAIL = 12,
	
LED_CTL_STOP_WPS_FAIL_OVERLAP = 13,
};


#define IS_LED_WPS_BLINKING(_LED_871x)	\
	(((struct LED_871x *)_LED_871x)->CurrLedState == LED_BLINK_WPS \
        || ((struct LED_871x *)_LED_871x)->CurrLedState == LED_BLINK_WPS_STOP \
        || ((struct LED_871x *)_LED_871x)->bLedWPSBlinkInProgress)


#define IS_LED_BLINKING(_LED_871x)	\
		(((struct LED_871x *)_LED_871x)->bLedWPSBlinkInProgress \
                || ((struct LED_871x *)_LED_871x)->bLedScanBlinkInProgress)


enum LED_PIN_871x {
	
LED_PIN_GPIO0,
	
LED_PIN_LED0,
	
LED_PIN_LED1
};

/*===========================================================================
 * LED customization.
 *===========================================================================
 */

enum LED_STRATEGY_871x {
	
SW_LED_MODE0, /* SW control 1 LED via GPIO0. It is default option. */
	
SW_LED_MODE1, /* 2 LEDs, through LED0 and LED1. For ALPHA. */
	
SW_LED_MODE2, /* SW control 1 LED via GPIO0,
                       * custom for AzWave 8187 minicard. */
	
SW_LED_MODE3, /* SW control 1 LED via GPIO0,
                       *  customized for Sercomm Printer Server case.*/
	
SW_LED_MODE4, /*for Edimax / Belkin*/
	
SW_LED_MODE5, /*for Sercomm / Belkin*/
	
SW_LED_MODE6, /*for WNC / Corega*/
	
HW_LED, /* HW control 2 LEDs, LED0 and LED1 (there are 4 different
                 * control modes, see MAC.CONFIG1 for details.)*/
};


struct LED_871x {
	
struct _adapter		*padapter;
	
enum LED_PIN_871x	LedPin;	/* Implementation for this SW led. */
	
u32			CurrLedState; /* Current LED state. */
	
u8			bLedOn; /* true if LED is ON */
	
u8			bSWLedCtrl;
	
u8			bLedBlinkInProgress; /*true if blinking */
	
u8			bLedNoLinkBlinkInProgress;
	
u8			bLedLinkBlinkInProgress;
	
u8			bLedStartToLinkBlinkInProgress;
	
u8			bLedScanBlinkInProgress;
	
u8			bLedWPSBlinkInProgress;
	
u32			BlinkTimes; /* No. times to toggle for blink.*/
	
u32			BlinkingLedState; /* Next state for blinking,
                                                   * either LED_ON or OFF.*/

	
struct timer_list	BlinkTimer; /* Timer object for led blinking.*/
	
struct work_struct	BlinkWorkItem; /* Workitem used by BlinkTimer */
};


struct led_priv {
	/* add for led control */
	
struct LED_871x		SwLed0;
	
struct LED_871x		SwLed1;
	
enum LED_STRATEGY_871x	LedStrategy;
	
u8			bRegUseLed;
	
void (*LedControlHandler)(struct _adapter *padapter,
				  enum LED_CTL_MODE LedAction);
	/* add for led control */
};

/*===========================================================================
 * Interface to manipulate LED objects.
 *===========================================================================*/
void r8712_InitSwLeds(struct _adapter *padapter);
void r8712_DeInitSwLeds(struct _adapter *padapter);
void LedControl871x(struct _adapter *padapter, enum LED_CTL_MODE LedAction);

#endif


Overall Contributors

PersonTokensPropCommitsCommitProp
larry fingerlarry finger25698.08%125.00%
lucas de marchilucas de marchi20.77%125.00%
james a shacklefordjames a shackleford20.77%125.00%
ali baharali bahar10.38%125.00%
Total261100.00%4100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}