Release 4.7 drivers/tty/serial/8250/8250_core.c

/*
 *  Universal/legacy driver for 8250/16550-type serial ports
 *
 *  Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
 *
 *  Copyright (C) 2001 Russell King.
 *
 *  Supports: ISA-compatible 8250/16550 ports
 *            PNP 8250/16550 ports
 *            early_serial_setup() ports
 *            userspace-configurable "phantom" ports
 *            "serial8250" platform devices
 *            serial8250_register_8250_port() ports
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/tty.h>
#include <linux/ratelimit.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/serial_8250.h>
#include <linux/nmi.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/pm_runtime.h>
#include <linux/io.h>
#ifdef CONFIG_SPARC
#include <linux/sunserialcore.h>
#endif

#include <asm/irq.h>

#include "8250.h"

/*
 * Configuration:
 *   share_irqs - whether we pass IRQF_SHARED to request_irq().  This option
 *                is unsafe when used on edge-triggered interrupts.
 */

static unsigned int share_irqs = SERIAL8250_SHARE_IRQS;


static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS;


static struct uart_driver serial8250_reg;


static unsigned int skip_txen_test; 
/* force skip of txen test at init time */


#define PASS_LIMIT	512

#include <asm/serial.h>
/*
 * SERIAL_PORT_DFNS tells us about built-in ports that have no
 * standard enumeration mechanism.   Platforms that can find all
 * serial ports via mechanisms like ACPI or PCI need not supply it.
 */
#ifndef SERIAL_PORT_DFNS

#define SERIAL_PORT_DFNS
#endif


static const struct old_serial_port old_serial_port[] = {
	SERIAL_PORT_DFNS /* defined in asm/serial.h */
};


#define UART_NR	CONFIG_SERIAL_8250_NR_UARTS

#ifdef CONFIG_SERIAL_8250_RSA


#define PORT_RSA_MAX 4

static unsigned long probe_rsa[PORT_RSA_MAX];

static unsigned int probe_rsa_count;
#endif /* CONFIG_SERIAL_8250_RSA  */


struct irq_info {
	
struct			hlist_node node;
	
int			irq;
	
spinlock_t		lock;	/* Protects list not the hash */
	
struct list_head	*head;
};


#define NR_IRQ_HASH		32	
/* Can be adjusted later */

static struct hlist_head irq_lists[NR_IRQ_HASH];
static DEFINE_MUTEX(hash_mutex);	/* Used to walk the hash */

/*
 * This is the serial driver's interrupt routine.
 *
 * Arjan thinks the old way was overly complex, so it got simplified.
 * Alan disagrees, saying that need the complexity to handle the weird
 * nature of ISA shared interrupts.  (This is a special exception.)
 *
 * In order to handle ISA shared interrupts properly, we need to check
 * that all ports have been serviced, and therefore the ISA interrupt
 * line has been de-asserted.
 *
 * This means we need to loop through all ports. checking that they
 * don't have an interrupt pending.
 */


static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
{
	struct irq_info *i = dev_id;
	struct list_head *l, *end = NULL;
	int pass_counter = 0, handled = 0;

	DEBUG_INTR("serial8250_interrupt(%d)...", irq);

	spin_lock(&i->lock);

	l = i->head;
	do {
		struct uart_8250_port *up;
		struct uart_port *port;

		up = list_entry(l, struct uart_8250_port, list);
		port = &up->port;

		if (port->handle_irq(port)) {
			handled = 1;
			end = NULL;
		} else if (end == NULL)
			end = l;

		l = l->next;

		if (l == i->head && pass_counter++ > PASS_LIMIT) {
			/* If we hit this, we're dead. */
			printk_ratelimited(KERN_ERR
				"serial8250: too much work for irq%d\n", irq);
			break;
		}
	} while (l != end);

	spin_unlock(&i->lock);

	DEBUG_INTR("end.\n");

	return IRQ_RETVAL(handled);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
148
82.68%
1
20.00%
yoshihiro yunomae
yoshihiro yunomae
17
9.50%
1
20.00%
russell king
russell king
14
7.82%
3
60.00%
Total
179
100.00%
5
100.00%

/*
 * To support ISA shared interrupts, we need to have one interrupt
 * handler that ensures that the IRQ line has been deasserted
 * before returning.  Failing to do this will result in the IRQ
 * line being stuck active, and, since ISA irqs are edge triggered,
 * no more IRQs will be seen.
 */


static void serial_do_unlink(struct irq_info *i, struct uart_8250_port *up)
{
	spin_lock_irq(&i->lock);

	if (!list_empty(i->head)) {
		if (i->head == &up->list)
			i->head = i->head->next;
		list_del(&up->list);
	} else {
		BUG_ON(i->head != &up->list);
		i->head = NULL;
	}
	spin_unlock_irq(&i->lock);
	/* List empty so throw away the hash node */
	if (i->head == NULL) {
		hlist_del(&i->node);
		kfree(i);
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
88
74.58%
1
50.00%
yoshihiro yunomae
yoshihiro yunomae
30
25.42%
1
50.00%
Total
118
100.00%
2
100.00%



static int serial_link_irq_chain(struct uart_8250_port *up)
{
	struct hlist_head *h;
	struct hlist_node *n;
	struct irq_info *i;
	int ret, irq_flags = up->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;

	mutex_lock(&hash_mutex);

	h = &irq_lists[up->port.irq % NR_IRQ_HASH];

	hlist_for_each(n, h) {
		i = hlist_entry(n, struct irq_info, node);
		if (i->irq == up->port.irq)
			break;
	}

	if (n == NULL) {
		i = kzalloc(sizeof(struct irq_info), GFP_KERNEL);
		if (i == NULL) {
			mutex_unlock(&hash_mutex);
			return -ENOMEM;
		}
		spin_lock_init(&i->lock);
		i->irq = up->port.irq;
		hlist_add_head(&i->node, h);
	}
	mutex_unlock(&hash_mutex);

	spin_lock_irq(&i->lock);

	if (i->head) {
		list_add(&up->list, i->head);
		spin_unlock_irq(&i->lock);

		ret = 0;
	} else {
		INIT_LIST_HEAD(&up->list);
		i->head = &up->list;
		spin_unlock_irq(&i->lock);
		irq_flags |= up->port.irqflags;
		ret = request_irq(up->port.irq, serial8250_interrupt,
				  irq_flags, "serial", i);
		if (ret < 0)
			serial_do_unlink(i, up);
	}

	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
192
68.57%
1
11.11%
yoshihiro yunomae
yoshihiro yunomae
51
18.21%
1
11.11%
russell king
russell king
25
8.93%
2
22.22%
matt schulte
matt schulte
5
1.79%
2
22.22%
paul gortmaker
paul gortmaker
3
1.07%
1
11.11%
manuel lauss
manuel lauss
2
0.71%
1
11.11%
stephen warren
stephen warren
2
0.71%
1
11.11%
Total
280
100.00%
9
100.00%



static void serial_unlink_irq_chain(struct uart_8250_port *up)
{
	/*
         * yes, some broken gcc emit "warning: 'i' may be used uninitialized"
         * but no, we are not going to take a patch that assigns NULL below.
         */
	struct irq_info *i;
	struct hlist_node *n;
	struct hlist_head *h;

	mutex_lock(&hash_mutex);

	h = &irq_lists[up->port.irq % NR_IRQ_HASH];

	hlist_for_each(n, h) {
		i = hlist_entry(n, struct irq_info, node);
		if (i->irq == up->port.irq)
			break;
	}

	BUG_ON(n == NULL);
	BUG_ON(i->head == NULL);

	if (list_empty(i->head))
		free_irq(up->port.irq, i);

	serial_do_unlink(i, up);
	mutex_unlock(&hash_mutex);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
117
90.70%
1
50.00%
sebastian andrzej siewior
sebastian andrzej siewior
12
9.30%
1
50.00%
Total
129
100.00%
2
100.00%

/*
 * This function is used to handle ports that do not have an
 * interrupt.  This doesn't work very well for 16450's, but gives
 * barely passable results for a 16550A.  (Although at the expense
 * of much CPU overhead).
 */


static void serial8250_timeout(unsigned long data)
{
	struct uart_8250_port *up = (struct uart_8250_port *)data;

	up->port.handle_irq(&up->port);
	mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port));
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
46
88.46%
1
50.00%
alan cox
alan cox
6
11.54%
1
50.00%
Total
52
100.00%
2
100.00%



static void serial8250_backup_timeout(unsigned long data)
{
	struct uart_8250_port *up = (struct uart_8250_port *)data;
	unsigned int iir, ier = 0, lsr;
	unsigned long flags;

	spin_lock_irqsave(&up->port.lock, flags);

	/*
         * Must disable interrupts or else we risk racing with the interrupt
         * based handler.
         */
	if (up->port.irq) {
		ier = serial_in(up, UART_IER);
		serial_out(up, UART_IER, 0);
	}

	iir = serial_in(up, UART_IIR);

	/*
         * This should be a safe test for anyone who doesn't trust the
         * IIR bits on their UART, but it's specifically designed for
         * the "Diva" UART used on the management processor on many HP
         * ia64 and parisc boxes.
         */
	lsr = serial_in(up, UART_LSR);
	up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
	if ((iir & UART_IIR_NO_INT) && (up->ier & UART_IER_THRI) &&
	    (!uart_circ_empty(&up->port.state->xmit) || up->port.x_char) &&
	    (lsr & UART_LSR_THRE)) {
		iir &= ~(UART_IIR_ID | UART_IIR_NO_INT);
		iir |= UART_IIR_THRI;
	}

	if (!(iir & UART_IIR_NO_INT))
		serial8250_tx_chars(up);

	if (up->port.irq)
		serial_out(up, UART_IER, ier);

	spin_unlock_irqrestore(&up->port.lock, flags);

	/* Standard timer interval plus 0.2s to keep the port running */
	mod_timer(&up->timer,
		jiffies + uart_poll_timeout(&up->port) + HZ / 5);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
215
94.30%
2
66.67%
alan cox
alan cox
13
5.70%
1
33.33%
Total
228
100.00%
3
100.00%



static int univ8250_setup_irq(struct uart_8250_port *up)
{
	struct uart_port *port = &up->port;
	int retval = 0;

	/*
         * The above check will only give an accurate result the first time
         * the port is opened so this value needs to be preserved.
         */
	if (up->bugs & UART_BUG_THRE) {
		pr_debug("ttyS%d - using backup timer\n", serial_index(port));

		up->timer.function = serial8250_backup_timeout;
		up->timer.data = (unsigned long)up;
		mod_timer(&up->timer, jiffies +
			  uart_poll_timeout(port) + HZ / 5);
	}

	/*
         * If the "interrupt" for this port doesn't correspond with any
         * hardware interrupt, we use a timer-based system.  The original
         * driver used to do this with IRQ0.
         */
	if (!port->irq) {
		up->timer.data = (unsigned long)up;
		mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
	} else
		retval = serial_link_irq_chain(up);

	return retval;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
134
100.00%
4
100.00%
Total
134
100.00%
4
100.00%



static void univ8250_release_irq(struct uart_8250_port *up)
{
	struct uart_port *port = &up->port;

	del_timer_sync(&up->timer);
	up->timer.function = serial8250_timeout;
	if (port->irq)
		serial_unlink_irq_chain(up);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
48
100.00%
2
100.00%
Total
48
100.00%
2
100.00%

#ifdef CONFIG_SERIAL_8250_RSA


static int serial8250_request_rsa_resource(struct uart_8250_port *up)
{
	unsigned long start = UART_RSA_BASE << up->port.regshift;
	unsigned int size = 8 << up->port.regshift;
	struct uart_port *port = &up->port;
	int ret = -EINVAL;

	switch (port->iotype) {
	case UPIO_HUB6:
	case UPIO_PORT:
		start += port->iobase;
		if (request_region(start, size, "serial-rsa"))
			ret = 0;
		else
			ret = -EBUSY;
		break;
	}

	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
96
100.00%
2
100.00%
Total
96
100.00%
2
100.00%



static void serial8250_release_rsa_resource(struct uart_8250_port *up)
{
	unsigned long offset = UART_RSA_BASE << up->port.regshift;
	unsigned int size = 8 << up->port.regshift;
	struct uart_port *port = &up->port;

	switch (port->iotype) {
	case UPIO_HUB6:
	case UPIO_PORT:
		release_region(port->iobase + offset, size);
		break;
	}
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
71
100.00%
2
100.00%
Total
71
100.00%
2
100.00%

#endif


static const struct uart_ops *base_ops;

static struct uart_ops univ8250_port_ops;


static const struct uart_8250_ops univ8250_driver_ops = {
	.setup_irq	= univ8250_setup_irq,
	.release_irq	= univ8250_release_irq,
};


static struct uart_8250_port serial8250_ports[UART_NR];

/**
 * serial8250_get_port - retrieve struct uart_8250_port
 * @line: serial line number
 *
 * This function retrieves struct uart_8250_port for the specific line.
 * This struct *must* *not* be used to perform a 8250 or serial core operation
 * which is not accessible otherwise. Its only purpose is to make the struct
 * accessible to the runtime-pm callbacks for context suspend/restore.
 * The lock assumption made here is none because runtime-pm suspend/resume
 * callbacks should not be invoked if there is any operation performed on the
 * port.
 */


struct uart_8250_port *serial8250_get_port(int line)
{
	return &serial8250_ports[line];
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
13
76.47%
1
33.33%
paul gortmaker
paul gortmaker
3
17.65%
1
33.33%
russell king
russell king
1
5.88%
1
33.33%
Total
17
100.00%
3
100.00%


EXPORT_SYMBOL_GPL(serial8250_get_port);


static void (*serial8250_isa_config)(int port, struct uart_port *up,
	unsigned short *capabilities);



void serial8250_set_isa_configurator(
	void (*v)(int port, struct uart_port *up, unsigned short *capabilities))
{
	serial8250_isa_config = v;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
25
86.21%
1
50.00%
russell king
russell king
4
13.79%
1
50.00%
Total
29
100.00%
2
100.00%


EXPORT_SYMBOL(serial8250_set_isa_configurator);

#ifdef CONFIG_SERIAL_8250_RSA



static void univ8250_config_port(struct uart_port *port, int flags)
{
	struct uart_8250_port *up = up_to_u8250p(port);

	up->probe &= ~UART_PROBE_RSA;
	if (port->type == PORT_RSA) {
		if (serial8250_request_rsa_resource(up) == 0)
			up->probe |= UART_PROBE_RSA;
	} else if (flags & UART_CONFIG_TYPE) {
		int i;

		for (i = 0; i < probe_rsa_count; i++) {
			if (probe_rsa[i] == up->port.iobase) {
				if (serial8250_request_rsa_resource(up) == 0)
					up->probe |= UART_PROBE_RSA;
				break;
			}
		}
	}

	base_ops->config_port(port, flags);

	if (port->type != PORT_RSA && up->probe & UART_PROBE_RSA)
		serial8250_release_rsa_resource(up);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
103
72.54%
2
22.22%
russell king
russell king
21
14.79%
4
44.44%
alan cox
alan cox
9
6.34%
1
11.11%
paul gortmaker
paul gortmaker
7
4.93%
1
11.11%
david daney
david daney
2
1.41%
1
11.11%
Total
142
100.00%
9
100.00%



static int univ8250_request_port(struct uart_port *port)
{
	struct uart_8250_port *up = up_to_u8250p(port);
	int ret;

	ret = base_ops->request_port(port);
	if (ret == 0 && port->type == PORT_RSA) {
		ret = serial8250_request_rsa_resource(up);
		if (ret < 0)
			base_ops->release_port(port);
	}

	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
44
62.86%
2
25.00%
russell king
russell king
15
21.43%
3
37.50%
alan cox
alan cox
6
8.57%
1
12.50%
sean young
sean young
3
4.29%
1
12.50%
shmulik ladkani
shmulik ladkani
2
2.86%
1
12.50%
Total
70
100.00%
8
100.00%



static void univ8250_release_port(struct uart_port *port)
{
	struct uart_8250_port *up = up_to_u8250p(port);

	if (port->type == PORT_RSA)
		serial8250_release_rsa_resource(up);
	base_ops->release_port(port);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
russell king
russell king
23
56.10%
1
20.00%
peter hurley
peter hurley
13
31.71%
1
20.00%
jamie iles
jamie iles
3
7.32%
1
20.00%
paul gortmaker
paul gortmaker
1
2.44%
1
20.00%
andy shevchenko
andy shevchenko
1
2.44%
1
20.00%
Total
41
100.00%
5
100.00%



static void univ8250_rsa_support(struct uart_ops *ops)
{
	ops->config_port  = univ8250_config_port;
	ops->request_port = univ8250_request_port;
	ops->release_port = univ8250_release_port;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
29
100.00%
1
100.00%
Total
29
100.00%
1
100.00%

#else

#define univ8250_rsa_support(x)		do { } while (0)
#endif /* CONFIG_SERIAL_8250_RSA */



static void __init serial8250_isa_init_ports(void)
{
	struct uart_8250_port *up;
	static int first = 1;
	int i, irqflag = 0;

	if (!first)
		return;
	first = 0;

	if (nr_uarts > UART_NR)
		nr_uarts = UART_NR;

	for (i = 0; i < nr_uarts; i++) {
		struct uart_8250_port *up = &serial8250_ports[i];
		struct uart_port *port = &up->port;

		port->line = i;
		serial8250_init_port(up);
		if (!base_ops)
			base_ops = port->ops;
		port->ops = &univ8250_port_ops;

		init_timer(&up->timer);
		up->timer.function = serial8250_timeout;

		up->ops = &univ8250_driver_ops;

		/*
                 * ALPHA_KLUDGE_MCR needs to be killed.
                 */
		up->mcr_mask = ~ALPHA_KLUDGE_MCR;
		up->mcr_force = ALPHA_KLUDGE_MCR;
	}

	/* chain base port ops to support Remote Supervisor Adapter */
	univ8250_port_ops = *base_ops;
	univ8250_rsa_support(&univ8250_port_ops);

	if (share_irqs)
		irqflag = IRQF_SHARED;

	for (i = 0, up = serial8250_ports;
	     i < ARRAY_SIZE(old_serial_port) && i < nr_uarts;
	     i++, up++) {
		struct uart_port *port = &up->port;

		port->iobase   = old_serial_port[i].port;
		port->irq      = irq_canonicalize(old_serial_port[i].irq);
		port->irqflags = old_serial_port[i].irqflags;
		port->uartclk  = old_serial_port[i].baud_base * 16;
		port->flags    = old_serial_port[i].flags;
		port->hub6     = old_serial_port[i].hub6;
		port->membase  = old_serial_port[i].iomem_base;
		port->iotype   = old_serial_port[i].io_type;
		port->regshift = old_serial_port[i].iomem_reg_shift;
		serial8250_set_defaults(up);

		port->irqflags |= irqflag;
		if (serial8250_isa_config != NULL)
			serial8250_isa_config(i, &up->port, &up->capabilities);
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
291
84.59%
3
23.08%
russell king
russell king
26
7.56%
2
15.38%
paul gortmaker
paul gortmaker
12
3.49%
2
15.38%
sebastian andrzej siewior
sebastian andrzej siewior
4
1.16%
1
7.69%
deepak saxena
deepak saxena
4
1.16%
1
7.69%
andrew morton
andrew morton
3
0.87%
2
15.38%
rabin vincent
rabin vincent
3
0.87%
1
7.69%
alan cox
alan cox
1
0.29%
1
7.69%
Total
344
100.00%
13
100.00%


static void __init

serial8250_register_ports(struct uart_driver *drv, struct device *dev)
{
	int i;

	for (i = 0; i < nr_uarts; i++) {
		struct uart_8250_port *up = &serial8250_ports[i];

		if (up->port.type == PORT_8250_CIR)
			continue;

		if (up->port.dev)
			continue;

		up->port.dev = dev;

		if (skip_txen_test)
			up->port.flags |= UPF_NO_TXEN_TEST;

		uart_add_one_port(drv, &up->port);
	}
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
67
69.79%
1
14.29%
maciej s. szmigiero
maciej s. szmigiero
11
11.46%
1
14.29%
corey minyard
corey minyard
7
7.29%
1
14.29%
russell king
russell king
6
6.25%
2
28.57%
sebastian andrzej siewior
sebastian andrzej siewior
4
4.17%
1
14.29%
paul gortmaker
paul gortmaker
1
1.04%
1
14.29%
Total
96
100.00%
7
100.00%

#ifdef CONFIG_SERIAL_8250_CONSOLE



static void univ8250_console_write(struct console *co, const char *s,
				   unsigned int count)
{
	struct uart_8250_port *up = &serial8250_ports[co->index];

	serial8250_console_write(up, s, count);
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
42
100.00%
1
100.00%
Total
42
100.00%
1
100.00%



static int univ8250_console_setup(struct console *co, char *options)
{
	struct uart_port *port;
	int retval;

	/*
         * Check whether an invalid uart number has been specified, and
         * if so, search for the first available port that does have
         * console support.
         */
	if (co->index >= nr_uarts)
		co->index = 0;
	port = &serial8250_ports[co->index].port;
	/* link port to console */
	port->cons = co;

	retval = serial8250_console_setup(port, options, false);
	if (retval != 0)
		port->cons = NULL;
	return retval;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
83
100.00%
3
100.00%
Total
83
100.00%
3
100.00%

/**
 *      univ8250_console_match - non-standard console matching
 *      @co:      registering console
 *      @name:    name from console command line
 *      @idx:     index from console command line
 *      @options: ptr to option string from console command line
 *
 *      Only attempts to match console command lines of the form:
 *          console=uart[8250],io|mmio|mmio16|mmio32,<addr>[,<options>]
 *          console=uart[8250],0x<addr>[,<options>]
 *      This form is used to register an initial earlycon boot console and
 *      replace it with the serial8250_console at 8250 driver init.
 *
 *      Performs console setup for a match (as required by interface)
 *      If no <options> are specified, then assume the h/w is already setup.
 *
 *      Returns 0 if console matches; otherwise non-zero to use default matching
 */


static int univ8250_console_match(struct console *co, char *name, int idx,
				  char *options)
{
	char match[] = "uart";	/* 8250-specific earlycon name */
	unsigned char iotype;
	unsigned long addr;
	int i;

	if (strncmp(name, match, 4) != 0)
		return -ENODEV;

	if (uart_parse_earlycon(options, &iotype, &addr, &options))
		return -ENODEV;

	/* try to match the port specified on the command line */
	for (i = 0; i < nr_uarts; i++) {
		struct uart_port *port = &serial8250_ports[i].port;

		if (port->iotype != iotype)
			continue;
		if ((iotype == UPIO_MEM || iotype == UPIO_MEM16 ||
		     iotype == UPIO_MEM32 || iotype == UPIO_MEM32BE)
		    && (port->mapbase != addr))
			continue;
		if (iotype == UPIO_PORT && port->iobase != addr)
			continue;

		co->index = i;
		port->cons = co;
		return serial8250_console_setup(port, options, true);
	}

	return -ENODEV;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
167
91.26%
3
60.00%
yinghai lu
yinghai lu
8
4.37%
1
20.00%
masahiro yamada
masahiro yamada
8
4.37%
1
20.00%
Total
183
100.00%
5
100.00%


static struct console univ8250_console = {
	.name		= "ttyS",
	.write		= univ8250_console_write,
	.device		= uart_console_device,
	.setup		= univ8250_console_setup,
	.match		= univ8250_console_match,
	.flags		= CON_PRINTBUFFER | CON_ANYTIME,
	.index		= -1,
	.data		= &serial8250_reg,
};



static int __init univ8250_console_init(void)
{
	if (nr_uarts == 0)
		return -ENODEV;

	serial8250_isa_init_ports();
	register_console(&univ8250_console);
	return 0;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
russell king
russell king
14
45.16%
1
20.00%
jan kiszka
jan kiszka
10
32.26%
1
20.00%
andrew morton
andrew morton
4
12.90%
1
20.00%
peter hurley
peter hurley
2
6.45%
1
20.00%
alan cox
alan cox
1
3.23%
1
20.00%
Total
31
100.00%
5
100.00%


console_initcall(univ8250_console_init);


#define SERIAL8250_CONSOLE	(&univ8250_console)
#else

#define SERIAL8250_CONSOLE	NULL
#endif


static struct uart_driver serial8250_reg = {
	.owner			= THIS_MODULE,
	.driver_name		= "serial",
	.dev_name		= "ttyS",
	.major			= TTY_MAJOR,
	.minor			= 64,
	.cons			= SERIAL8250_CONSOLE,
};

/*
 * early_serial_setup - early registration for 8250 ports
 *
 * Setup an 8250 port structure prior to console initialisation.  Use
 * after console initialisation will cause undefined behaviour.
 */


int __init early_serial_setup(struct uart_port *port)
{
	struct uart_port *p;

	if (port->line >= ARRAY_SIZE(serial8250_ports) || nr_uarts == 0)
		return -ENODEV;

	serial8250_isa_init_ports();
	p = &serial8250_ports[port->line].port;
	p->iobase       = port->iobase;
	p->membase      = port->membase;
	p->irq          = port->irq;
	p->irqflags     = port->irqflags;
	p->uartclk      = port->uartclk;
	p->fifosize     = port->fifosize;
	p->regshift     = port->regshift;
	p->iotype       = port->iotype;
	p->flags        = port->flags;
	p->mapbase      = port->mapbase;
	p->mapsize      = port->mapsize;
	p->private_data = port->private_data;
	p->type		= port->type;
	p->line		= port->line;

	serial8250_set_defaults(up_to_u8250p(p));

	if (port->serial_in)
		p->serial_in = port->serial_in;
	if (port->serial_out)
		p->serial_out = port->serial_out;
	if (port->handle_irq)
		p->handle_irq = port->handle_irq;

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
david daney
david daney
113
52.56%
2
18.18%
christoph hellwig
christoph hellwig
18
8.37%
1
9.09%
helge deller
helge deller
16
7.44%
1
9.09%
russell king
russell king
15
6.98%
1
9.09%
andrew morton
andrew morton
15
6.98%
1
9.09%
jamie iles
jamie iles
14
6.51%
1
9.09%
vikram pandita
vikram pandita
8
3.72%
1
9.09%
mans rullgard
mans rullgard
8
3.72%
1
9.09%
jan kiszka
jan kiszka
4
1.86%
1
9.09%
peter hurley
peter hurley
4
1.86%
1
9.09%
Total
215
100.00%
11
100.00%

/**
 *      serial8250_suspend_port - suspend one serial port
 *      @line:  serial line number
 *
 *      Suspend one serial port.
 */


void serial8250_suspend_port(int line)
{
	struct uart_8250_port *up = &serial8250_ports[line];
	struct uart_port *port = &up->port;

	if (!console_suspend_enabled && uart_console(port) &&
	    port->type != PORT_8250) {
		unsigned char canary = 0xa5;
		serial_out(up, UART_SCR, canary);
		if (serial_in(up, UART_SCR) == canary)
			up->canary = canary;
	}

	uart_suspend_port(&serial8250_reg, port);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
71
81.61%
2
66.67%
russell king
russell king
16
18.39%
1
33.33%
Total
87
100.00%
3
100.00%


EXPORT_SYMBOL(serial8250_suspend_port);

/**
 *      serial8250_resume_port - resume one serial port
 *      @line:  serial line number
 *
 *      Resume one serial port.
 */


void serial8250_resume_port(int line)
{
	struct uart_8250_port *up = &serial8250_ports[line];
	struct uart_port *port = &up->port;

	up->canary = 0;

	if (up->capabilities & UART_NATSEMI) {
		/* Ensure it's still in high speed mode */
		serial_port_out(port, UART_LCR, 0xE0);

		ns16550a_goto_highspeed(up);

		serial_port_out(port, UART_LCR, 0);
		port->uartclk = 921600*16;
	}
	uart_resume_port(&serial8250_reg, port);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
david woodhouse
david woodhouse
40
47.06%
1
14.29%
russell king
russell king
16
18.82%
1
14.29%
paul gortmaker
paul gortmaker
15
17.65%
2
28.57%
yin kangkai
yin kangkai
8
9.41%
2
28.57%
peter hurley
peter hurley
6
7.06%
1
14.29%
Total
85
100.00%
7
100.00%


EXPORT_SYMBOL(serial8250_resume_port);

/*
 * Register a set of serial devices attached to a platform device.  The
 * list is terminated with a zero flags entry, which means we expect
 * all entries to have at least UPF_BOOT_AUTOCONF set.
 */


static int serial8250_probe(struct platform_device *dev)
{
	struct plat_serial8250_port *p = dev_get_platdata(&dev->dev);
	struct uart_8250_port uart;
	int ret, i, irqflag = 0;

	memset(&uart, 0, sizeof(uart));

	if (share_irqs)
		irqflag = IRQF_SHARED;

	for (i = 0; p && p->flags != 0; p++, i++) {
		uart.port.iobase	= p->iobase;
		uart.port.membase	= p->membase;
		uart.port.irq		= p->irq;
		uart.port.irqflags	= p->irqflags;
		uart.port.uartclk	= p->uartclk;
		uart.port.regshift	= p->regshift;
		uart.port.iotype	= p->iotype;
		uart.port.flags		= p->flags;
		uart.port.mapbase	= p->mapbase;
		uart.port.hub6		= p->hub6;
		uart.port.private_data	= p->private_data;
		uart.port.type		= p->type;
		uart.port.serial_in	= p->serial_in;
		uart.port.serial_out	= p->serial_out;
		uart.port.handle_irq	= p->handle_irq;
		uart.port.handle_break	= p->handle_break;
		uart.port.set_termios	= p->set_termios;
		uart.port.get_mctrl	= p->get_mctrl;
		uart.port.pm		= p->pm;
		uart.port.dev		= &dev->dev;
		uart.port.irqflags	|= irqflag;
		ret = serial8250_register_8250_port(&uart);
		if (ret < 0) {
			dev_err(&dev->dev, "unable to register port at index %d "
				"(IO%lx MEM%llx IRQ%d): %d\n", i,
				p->iobase, (unsigned long long)p->mapbase,
				p->irq, ret);
		}
	}
	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
russell king
russell king
188
55.29%
3
18.75%
alan cox
alan cox
46
13.53%
1
6.25%
david daney
david daney
24
7.06%
2
12.50%
andre goddard rosa
andre goddard rosa
13
3.82%
1
6.25%
wan ahmad zainie
wan ahmad zainie
10
2.94%
1
6.25%
vikram pandita
vikram pandita
9
2.65%
1
6.25%
manuel lauss
manuel lauss
8
2.35%
1
6.25%
will newton
will newton
8
2.35%
1
6.25%
philippe langlais
philippe langlais
8
2.35%
1
6.25%
dan williams
dan williams
8
2.35%
1
6.25%
jamie iles
jamie iles
8
2.35%
1
6.25%
josh boyer
josh boyer
6
1.76%
1
6.25%
jingoo han
jingoo han
4
1.18%
1
6.25%
Total
340
100.00%
16
100.00%

/*
 * Remove serial ports registered against a platform device.
 */


static int serial8250_remove(struct platform_device *dev)
{
	int i;

	for (i = 0; i < nr_uarts; i++) {
		struct uart_8250_port *up = &serial8250_ports[i];

		if (up->port.dev == &dev->dev)
			serial8250_unregister_port(i);
	}
	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
russell king
russell king
60
98.36%
2
66.67%
kyle mcmartin
kyle mcmartin
1
1.64%
1
33.33%
Total
61
100.00%
3
100.00%



static int serial8250_suspend(struct platform_device *dev, pm_message_t state)
{
	int i;

	for (i = 0; i < UART_NR; i++) {
		struct uart_8250_port *up = &serial8250_ports[i];

		if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
			uart_suspend_port(&serial8250_reg, &up->port);
	}

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
russell king
russell king
77
98.72%
3
75.00%
pavel machek
pavel machek
1
1.28%
1
25.00%
Total
78
100.00%
4
100.00%



static int serial8250_resume(struct platform_device *dev)
{
	int i;

	for (i = 0; i < UART_NR; i++) {
		struct uart_8250_port *up = &serial8250_ports[i];

		if (up->port.type != PORT_UNKNOWN && up->port.dev == &dev->dev)
			serial8250_resume_port(i);
	}

	return 0;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
russell king
russell king
67
97.10%
2
66.67%
david woodhouse
david woodhouse
2
2.90%
1
33.33%
Total
69
100.00%
3
100.00%


static struct platform_driver serial8250_isa_driver = {
	.probe		= serial8250_probe,
	.remove		= serial8250_remove,
	.suspend	= serial8250_suspend,
	.resume		= serial8250_resume,
	.driver		= {
		.name	= "serial8250",
        },
};

/*
 * This "device" covers _all_ ISA 8250-compatible serial devices listed
 * in the table in include/asm/serial.h
 */

static struct platform_device *serial8250_isa_devs;

/*
 * serial8250_register_8250_port and serial8250_unregister_port allows for
 * 16x50 serial ports to be configured at run-time, to support PCMCIA
 * modems and PCI multiport cards.
 */
static DEFINE_MUTEX(serial_mutex);



static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port *port)
{
	int i;

	/*
         * First, find a port entry which matches.
         */
	for (i = 0; i < nr_uarts; i++)
		if (uart_match_port(&serial8250_ports[i].port, port))
			return &serial8250_ports[i];

	/* try line number first if still available */
	i = port->line;
	if (i < nr_uarts && serial8250_ports[i].port.type == PORT_UNKNOWN &&
			serial8250_ports[i].port.iobase == 0)
		return &serial8250_ports[i];
	/*
         * We didn't find a matching entry, so look for the first
         * free entry.  We look for one which hasn't been previously
         * used (indicated by zero iobase).
         */
	for (i = 0; i < nr_uarts; i++)
		if (serial8250_ports[i].port.type == PORT_UNKNOWN &&
		    serial8250_ports[i].port.iobase == 0)
			return &serial8250_ports[i];

	/*
         * That also failed.  Last resort is to find any entry which
         * doesn't have a real port associated with it.
         */
	for (i = 0; i < nr_uarts; i++)
		if (serial8250_ports[i].port.type == PORT_UNKNOWN)
			return &serial8250_ports[i];

	return NULL;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
russell king
russell king
131
74.43%
1
33.33%
sebastian andrzej siewior
sebastian andrzej siewior
42
23.86%
1
33.33%
kyle mcmartin
kyle mcmartin
3
1.70%
1
33.33%
Total
176
100.00%
3
100.00%

/**
 *      serial8250_register_8250_port - register a serial port
 *      @up: serial port template
 *
 *      Configure the serial port specified by the request. If the
 *      port exists and is in use, it is hung up and unregistered
 *      first.
 *
 *      The port is then probed and if necessary the IRQ is autodetected
 *      If this fails an error is returned.
 *
 *      On success the port is ready to use and the line number is returned.
 */


int serial8250_register_8250_port(struct uart_8250_port *up)
{
	struct uart_8250_port *uart;
	int ret = -ENOSPC;

	if (up->port.uartclk == 0)
		return -EINVAL;

	mutex_lock(&serial_mutex);

	uart = serial8250_find_match_or_unused(&up->port);
	if (uart && uart->port.type != PORT_8250_CIR) {
		if (uart->port.dev)
			uart_remove_one_port(&serial8250_reg, &uart->port);

		uart->port.iobase       = up->port.iobase;
		uart->port.membase      = up->port.membase;
		uart->port.irq          = up->port.irq;
		uart->port.irqflags     = up->port.irqflags;
		uart->port.uartclk      = up->port.uartclk;
		uart->port.fifosize     = up->port.fifosize;
		uart->port.regshift     = up->port.regshift;
		uart->port.iotype       = up->port.iotype;
		uart->port.flags        = up->port.flags | UPF_BOOT_AUTOCONF;
		uart->bugs		= up->bugs;
		uart->port.mapbase      = up->port.mapbase;
		uart->port.mapsize      = up->port.mapsize;
		uart->port.private_data = up->port.private_data;
		uart->tx_loadsz		= up->tx_loadsz;
		uart->capabilities	= up->capabilities;
		uart->port.throttle	= up->port.throttle;
		uart->port.unthrottle	= up->port.unthrottle;
		uart->port.rs485_config	= up->port.rs485_config;
		uart->port.rs485	= up->port.rs485;
		uart->dma		= up->dma;

		/* Take tx_loadsz from fifosize if it wasn't set separately */
		if (uart->port.fifosize && !uart->tx_loadsz)
			uart->tx_loadsz = uart->port.fifosize;

		if (up->port.dev)
			uart->port.dev = up->port.dev;

		if (skip_txen_test)
			uart->port.flags |= UPF_NO_TXEN_TEST;

		if (up->port.flags & UPF_FIXED_TYPE)
			uart->port.type = up->port.type;

		serial8250_set_defaults(uart);

		/* Possibly override default I/O functions.  */
		if (up->port.serial_in)
			uart->port.serial_in = up->port.serial_in;
		if (up->port.serial_out)
			uart->port.serial_out = up->port.serial_out;
		if (up->port.handle_irq)
			uart->port.handle_irq = up->port.handle_irq;
		/*  Possibly override set_termios call */
		if (up->port.set_termios)
			uart->port.set_termios = up->port.set_termios;
		if (up->port.get_mctrl)
			uart->port.get_mctrl = up->port.get_mctrl;
		if (up->port.set_mctrl)
			uart->port.set_mctrl = up->port.set_mctrl;
		if (up->port.startup)
			uart->port.startup = up->port.startup;
		if (up->port.shutdown)
			uart->port.shutdown = up->port.shutdown;
		if (up->port.pm)
			uart->port.pm = up->port.pm;
		if (up->port.handle_break)
			uart->port.handle_break = up->port.handle_break;
		if (up->dl_read)
			uart->dl_read = up->dl_read;
		if (up->dl_write)
			uart->dl_write = up->dl_write;

		if (uart->port.type != PORT_8250_CIR) {
			if (serial8250_isa_config != NULL)
				serial8250_isa_config(0, &uart->port,
						&uart->capabilities);

			ret = uart_add_one_port(&serial8250_reg,
						&uart->port);
			if (ret == 0)
				ret = uart->port.line;
		} else {
			dev_info(uart->port.dev,
				"skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
				uart->port.iobase,
				(unsigned long long)uart->port.mapbase,
				uart->port.irq);

			ret = 0;
		}
	}
	mutex_unlock(&serial_mutex);

	return ret;
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
russell king
russell king
188
25.65%
2
6.67%
magnus damm
magnus damm
118
16.10%
1
3.33%
sebastian andrzej siewior
sebastian andrzej siewior
62
8.46%
2
6.67%
maciej s. szmigiero
maciej s. szmigiero
53
7.23%
1
3.33%
peter hurley
peter hurley
46
6.28%
5
16.67%
david daney
david daney
44
6.00%
2
6.67%
heikki krogerus
heikki krogerus
40
5.46%
2
6.67%
alan cox
alan cox
29
3.96%
2
6.67%
ricardo ribalda
ricardo ribalda
26
3.55%
2
6.67%
wan ahmad zainie
wan ahmad zainie
20
2.73%
1
3.33%
sean young
sean young
16
2.18%
2
6.67%
philippe langlais
philippe langlais
15
2.05%
1
3.33%
jamie iles
jamie iles
14
1.91%
1
3.33%
dan williams
dan williams
14
1.91%
1
3.33%
manuel lauss
manuel lauss
14
1.91%
1
3.33%
mans rullgard
mans rullgard
12
1.64%
1
3.33%
vikram pandita
vikram pandita
9
1.23%
1
3.33%
will newton
will newton
9
1.23%
1
3.33%
arjan van de ven
arjan van de ven
4
0.55%
1
3.33%
Total
733
100.00%
30
100.00%


EXPORT_SYMBOL(serial8250_register_8250_port);

/**
 *      serial8250_unregister_port - remove a 16x50 serial port at runtime
 *      @line: serial line number
 *
 *      Remove one serial port.  This may not be called from interrupt
 *      context.  We hand the port back to the our control.
 */


void serial8250_unregister_port(int line)
{
	struct uart_8250_port *uart = &serial8250_ports[line];

	mutex_lock(&serial_mutex);

	if (uart->em485) {
		unsigned long flags;

		spin_lock_irqsave(&uart->port.lock, flags);
		serial8250_em485_destroy(uart);
		spin_unlock_irqrestore(&uart->port.lock, flags);
	}

	uart_remove_one_port(&serial8250_reg, &uart->port);
	if (serial8250_isa_devs) {
		uart->port.flags &= ~UPF_BOOT_AUTOCONF;
		if (skip_txen_test)
			uart->port.flags |= UPF_NO_TXEN_TEST;
		uart->port.type = PORT_UNKNOWN;
		uart->port.dev = &serial8250_isa_devs->dev;
		uart->capabilities = 0;
		uart_add_one_port(&serial8250_reg, &uart->port);
	} else {
		uart->port.dev = NULL;
	}
	mutex_unlock(&serial_mutex);
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
russell king
russell king
94
59.87%
3
37.50%
matwey v. kornilov
matwey v. kornilov
41
26.11%
1
12.50%
peter hurley
peter hurley
13
8.28%
2
25.00%
breno leitao
breno leitao
5
3.18%
1
12.50%
arjan van de ven
arjan van de ven
4
2.55%
1
12.50%
Total
157
100.00%
8
100.00%


EXPORT_SYMBOL(serial8250_unregister_port);



static int __init serial8250_init(void)
{
	int ret;

	if (nr_uarts == 0)
		return -ENODEV;

	serial8250_isa_init_ports();

	pr_info("Serial: 8250/16550 driver, %d ports, IRQ sharing %sabled\n",
		nr_uarts, share_irqs ? "en" : "dis");

#ifdef CONFIG_SPARC
	ret = sunserial_register_minors(&serial8250_reg, UART_NR);
#else
	serial8250_reg.nr = UART_NR;
	ret = uart_register_driver(&serial8250_reg);
#endif
	if (ret)
		goto out;

	ret = serial8250_pnp_init();
	if (ret)
		goto unreg_uart_drv;

	serial8250_isa_devs = platform_device_alloc("serial8250",
						    PLAT8250_DEV_LEGACY);
	if (!serial8250_isa_devs) {
		ret = -ENOMEM;
		goto unreg_pnp;
	}

	ret = platform_device_add(serial8250_isa_devs);
	if (ret)
		goto put_dev;

	serial8250_register_ports(&serial8250_reg, &serial8250_isa_devs->dev);

	ret = platform_driver_register(&serial8250_isa_driver);
	if (ret == 0)
		goto out;

	platform_device_del(serial8250_isa_devs);
put_dev:
	platform_device_put(serial8250_isa_devs);
unreg_pnp:
	serial8250_pnp_exit();
unreg_uart_drv:
#ifdef CONFIG_SPARC
	sunserial_unregister_minors(&serial8250_reg, UART_NR);
#else
	uart_unregister_driver(&serial8250_reg);
#endif
out:
	return ret;
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
russell king
russell king
111
55.78%
7
53.85%
david s. miller
david s. miller
33
16.58%
1
7.69%
dmitry torokhov
dmitry torokhov
21
10.55%
1
7.69%
sean young
sean young
20
10.05%
1
7.69%
jan kiszka
jan kiszka
10
5.03%
1
7.69%
dave jones
dave jones
2
1.01%
1
7.69%
phillip raffeck
phillip raffeck
2
1.01%
1
7.69%
Total
199
100.00%
13
100.00%



static void __exit serial8250_exit(void)
{
	struct platform_device *isa_dev = serial8250_isa_devs;

	/*
         * This tells serial8250_unregister_port() not to re-register
         * the ports (thereby making serial8250_isa_driver permanently
         * in use.)
         */
	serial8250_isa_devs = NULL;

	platform_driver_unregister(&serial8250_isa_driver);
	platform_device_unregister(isa_dev);

	serial8250_pnp_exit();

#ifdef CONFIG_SPARC
	sunserial_unregister_minors(&serial8250_reg, UART_NR);
#else
	uart_unregister_driver(&serial8250_reg);
#endif
}

Contributors
Person
Tokens
Prop
Commits
CommitProp
russell king
russell king
38
67.86%
4
66.67%
david s. miller
david s. miller
15
26.79%
1
16.67%
sean young
sean young
3
5.36%
1
16.67%
Total
56
100.00%
6
100.00%


module_init(serial8250_init);

module_exit(serial8250_exit);

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Generic 8250/16x50 serial driver");

module_param(share_irqs, uint, 0644);
MODULE_PARM_DESC(share_irqs, "Share IRQs with other non-8250/16x50 devices (unsafe)");

module_param(nr_uarts, uint, 0644);
MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");

module_param(skip_txen_test, uint, 0644);
MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time");

#ifdef CONFIG_SERIAL_8250_RSA
module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
#endif

MODULE_ALIAS_CHARDEV_MAJOR(TTY_MAJOR);

#ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS
#ifndef MODULE
/* This module was renamed to 8250_core in 3.7.  Keep the old "8250" name
 * working as well for the module options so we don't break people.  We
 * need to keep the names identical and the convenient macros will happily
 * refuse to let us do that by failing the build with redefinition errors
 * of global variables.  So we stick them inside a dummy function to avoid
 * those conflicts.  The options still get parsed, and the redefined
 * MODULE_PARAM_PREFIX lets us keep the "8250." syntax alive.
 *
 * This is hacky.  I'm sorry.
 */


static void __used s8250_options(void)
{

#undef MODULE_PARAM_PREFIX

#define MODULE_PARAM_PREFIX "8250_core."

	module_param_cb(share_irqs, &param_ops_uint, &share_irqs, 0644);
	module_param_cb(nr_uarts, &param_ops_uint, &nr_uarts, 0644);
	module_param_cb(skip_txen_test, &param_ops_uint, &skip_txen_test, 0644);
#ifdef CONFIG_SERIAL_8250_RSA
	__module_param_call(MODULE_PARAM_PREFIX, probe_rsa,
		&param_array_ops, .arr = &__param_arr_probe_rsa,
		0444, -1, 0);
#endif
}
Contributors
Person
Tokens
Prop
Commits
CommitProp
josh boyer
josh boyer
80
96.39%
1
33.33%
jani nikula
jani nikula
2
2.41%
1
33.33%
jiri slaby
jiri slaby
1
1.20%
1
33.33%
Total
83
100.00%
3
100.00%

#else
MODULE_ALIAS("8250_core");
#endif
#endif
Overall Contributors
Person
Tokens
Prop
Commits
CommitProp
peter hurley
peter hurley
2261
42.07%
15
10.56%
russell king
russell king
1466
27.27%
31
21.83%
david daney
david daney
183
3.40%
3
2.11%
alan cox
alan cox
138
2.57%
7
4.93%
sebastian andrzej siewior
sebastian andrzej siewior
127
2.36%
5
3.52%
magnus damm
magnus damm
123
2.29%
1
0.70%
josh boyer
josh boyer
98
1.82%
2
1.41%
yoshihiro yunomae
yoshihiro yunomae
98
1.82%
1
0.70%
maciej s. szmigiero
maciej s. szmigiero
64
1.19%
1
0.70%
david s. miller
david s. miller
55
1.02%
2
1.41%
paul gortmaker
paul gortmaker
50
0.93%
3
2.11%
sean young
sean young
43
0.80%
2
1.41%
david woodhouse
david woodhouse
42
0.78%
1
0.70%
matwey v. kornilov
matwey v. kornilov
41
0.76%
1
0.70%
heikki krogerus
heikki krogerus
40
0.74%
2
1.41%
jamie iles
jamie iles
39
0.73%
2
1.41%
dave jones
dave jones
30
0.56%
1
0.70%
wan ahmad zainie
wan ahmad zainie
30
0.56%
1
0.70%
ricardo ribalda
ricardo ribalda
29
0.54%
3
2.11%
vikram pandita
vikram pandita
26
0.48%
1
0.70%
andrew morton
andrew morton
25
0.47%
4
2.82%
dan williams
dan williams
25
0.47%
2
1.41%
manuel lauss
manuel lauss
24
0.45%
2
1.41%
jan kiszka
jan kiszka
24
0.45%
1
0.70%
philippe langlais
philippe langlais
23
0.43%
1
0.70%
chuck ebbert
chuck ebbert
22
0.41%
1
0.70%
dmitry torokhov
dmitry torokhov
21
0.39%
1
0.70%
mans rullgard
mans rullgard
20
0.37%
1
0.70%
christoph hellwig
christoph hellwig
18
0.33%
1
0.70%
will newton
will newton
17
0.32%
1
0.70%
helge deller
helge deller
16
0.30%
1
0.70%
arjan van de ven
arjan van de ven
14
0.26%
2
1.41%
andre goddard rosa
andre goddard rosa
13
0.24%
1
0.70%
anton wuerfel
anton wuerfel
12
0.22%
3
2.11%
yinghai lu
yinghai lu
11
0.20%
1
0.70%
masahiro yamada
masahiro yamada
9
0.17%
1
0.70%
bjorn helgaas
bjorn helgaas
9
0.17%
1
0.70%
jiri slaby
jiri slaby
8
0.15%
3
2.11%
al viro
al viro
8
0.15%
2
1.41%
yin kangkai
yin kangkai
8
0.15%
2
1.41%
corey minyard
corey minyard
7
0.13%
1
0.70%
breno leitao
breno leitao
5
0.09%
1
0.70%
matt schulte
matt schulte
5
0.09%
2
1.41%
steve youngs
steve youngs
5
0.09%
1
0.70%
deepak saxena
deepak saxena
4
0.07%
1
0.70%
kyle mcmartin
kyle mcmartin
4
0.07%
1
0.70%
jingoo han
jingoo han
4
0.07%
1
0.70%
tejun heo
tejun heo
3
0.06%
1
0.70%
rabin vincent
rabin vincent
3
0.06%
1
0.70%
daniel drake
daniel drake
3
0.06%
1
0.70%
bryan wu
bryan wu
3
0.06%
1
0.70%
peter zijlstra
peter zijlstra
2
0.04%
1
0.70%
shmulik ladkani
shmulik ladkani
2
0.04%
1
0.70%
phillip raffeck
phillip raffeck
2
0.04%
1
0.70%
sergei shtylyov
sergei shtylyov
2
0.04%
1
0.70%
jani nikula
jani nikula
2
0.04%
1
0.70%
adrian bunk
adrian bunk
2
0.04%
2
1.41%
stephen warren
stephen warren
2
0.04%
1
0.70%
thomas gleixner
thomas gleixner
1
0.02%
1
0.70%
andy shevchenko
andy shevchenko
1
0.02%
1
0.70%
pavel machek
pavel machek
1
0.02%
1
0.70%
rusty russell
rusty russell
1
0.02%
1
0.70%
randy dunlap
randy dunlap
1
0.02%
1
0.70%
Total
5375
100.00%
142
100.00%
  
Directory: drivers/tty/serial/8250

Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.