cregit-Linux how code gets into the kernel

Release 4.7 drivers/tty/serial/8250/8250_moxa.c

/*
 * 8250_moxa.c - MOXA Smartio/Industio MUE multiport serial driver.
 *
 * Author: Mathieu OTHACEHE <m.othacehe@gmail.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#include <linux/module.h>
#include <linux/pci.h>

#include "8250.h"


#define	PCI_DEVICE_ID_MOXA_CP102E	0x1024

#define	PCI_DEVICE_ID_MOXA_CP102EL	0x1025

#define	PCI_DEVICE_ID_MOXA_CP104EL_A	0x1045

#define	PCI_DEVICE_ID_MOXA_CP114EL	0x1144

#define	PCI_DEVICE_ID_MOXA_CP116E_A_A	0x1160

#define	PCI_DEVICE_ID_MOXA_CP116E_A_B	0x1161

#define	PCI_DEVICE_ID_MOXA_CP118EL_A	0x1182

#define	PCI_DEVICE_ID_MOXA_CP118E_A_I	0x1183

#define	PCI_DEVICE_ID_MOXA_CP132EL	0x1322

#define	PCI_DEVICE_ID_MOXA_CP134EL_A	0x1342

#define	PCI_DEVICE_ID_MOXA_CP138E_A	0x1381

#define	PCI_DEVICE_ID_MOXA_CP168EL_A	0x1683


#define MOXA_BASE_BAUD 921600

#define MOXA_UART_OFFSET 0x200

#define MOXA_BASE_BAR 1


struct moxa8250_board {
	
unsigned int num_ports;
	
int line[0];
};

enum {
	
moxa8250_2p = 0,
	
moxa8250_4p,
	
moxa8250_8p
};


static struct moxa8250_board moxa8250_boards[] = {
	[moxa8250_2p] = { .num_ports = 2},
	[moxa8250_4p] = { .num_ports = 4},
	[moxa8250_8p] = { .num_ports = 8},
};


static int moxa8250_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct uart_8250_port uart; struct moxa8250_board *brd; void __iomem *ioaddr; resource_size_t baseaddr; unsigned int i, nr_ports; unsigned int offset; int ret; brd = &moxa8250_boards[id->driver_data]; nr_ports = brd->num_ports; ret = pcim_enable_device(pdev); if (ret) return ret; brd = devm_kzalloc(&pdev->dev, sizeof(struct moxa8250_board) + sizeof(unsigned int) * nr_ports, GFP_KERNEL); if (!brd) return -ENOMEM; memset(&uart, 0, sizeof(struct uart_8250_port)); uart.port.dev = &pdev->dev; uart.port.irq = pdev->irq; uart.port.uartclk = MOXA_BASE_BAUD * 16; uart.port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; baseaddr = pci_resource_start(pdev, MOXA_BASE_BAR); ioaddr = pcim_iomap(pdev, MOXA_BASE_BAR, 0); if (!ioaddr) return -ENOMEM; for (i = 0; i < nr_ports; i++) { /* * MOXA Smartio MUE boards with 4 ports have * a different offset for port #3 */ if (nr_ports == 4 && i == 3) offset = 7 * MOXA_UART_OFFSET; else offset = i * MOXA_UART_OFFSET; uart.port.iotype = UPIO_MEM; uart.port.iobase = 0; uart.port.mapbase = baseaddr + offset; uart.port.membase = ioaddr + offset; uart.port.regshift = 0; dev_dbg(&pdev->dev, "Setup PCI port: port %lx, irq %d, type %d\n", uart.port.iobase, uart.port.irq, uart.port.iotype); brd->line[i] = serial8250_register_8250_port(&uart); if (brd->line[i] < 0) { dev_err(&pdev->dev, "Couldn't register serial port %lx, irq %d, type %d, error %d\n", uart.port.iobase, uart.port.irq, uart.port.iotype, brd->line[i]); break; } } pci_set_drvdata(pdev, brd); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
mathieu othacehemathieu othacehe381100.00%1100.00%
Total381100.00%1100.00%


static void moxa8250_remove(struct pci_dev *pdev) { struct moxa8250_board *brd = pci_get_drvdata(pdev); unsigned int i; for (i = 0; i < brd->num_ports; i++) serial8250_unregister_port(brd->line[i]); }

Contributors

PersonTokensPropCommitsCommitProp
mathieu othacehemathieu othacehe50100.00%1100.00%
Total50100.00%1100.00%

#define MOXA_DEVICE(id, data) { PCI_VDEVICE(MOXA, id), (kernel_ulong_t)data } static const struct pci_device_id pci_ids[] = { MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP102E, moxa8250_2p), MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP102EL, moxa8250_2p), MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP104EL_A, moxa8250_4p), MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP114EL, moxa8250_4p), MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP116E_A_A, moxa8250_8p), MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP116E_A_B, moxa8250_8p), MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP118EL_A, moxa8250_8p), MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP118E_A_I, moxa8250_8p), MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP132EL, moxa8250_2p), MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP134EL_A, moxa8250_4p), MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP138E_A, moxa8250_8p), MOXA_DEVICE(PCI_DEVICE_ID_MOXA_CP168EL_A, moxa8250_8p), {0} }; MODULE_DEVICE_TABLE(pci, pci_ids); static struct pci_driver moxa8250_pci_driver = { .name = "8250_moxa", .id_table = pci_ids, .probe = moxa8250_probe, .remove = moxa8250_remove, }; module_pci_driver(moxa8250_pci_driver); MODULE_AUTHOR("Mathieu OTHACEHE"); MODULE_DESCRIPTION("MOXA SmartIO MUE driver"); MODULE_LICENSE("GPL v2");

Overall Contributors

PersonTokensPropCommitsCommitProp
mathieu othacehemathieu othacehe728100.00%1100.00%
Total728100.00%1100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}