cregit-Linux how code gets into the kernel

Release 4.7 drivers/tty/serial/8250/8250_of.c

/*
 *  Serial Port driver for Open Firmware platform devices
 *
 *    Copyright (C) 2006 Arnd Bergmann <arnd@arndb.de>, IBM Corp.
 *
 *  This program is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU General Public License
 *  as published by the Free Software Foundation; either version
 *  2 of the License, or (at your option) any later version.
 *
 */
#include <linux/console.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk.h>

#include "8250.h"


struct of_serial_info {
	
struct clk *clk;
	
int type;
	
int line;
};

#ifdef CONFIG_ARCH_TEGRA

static void tegra_serial_handle_break(struct uart_port *p) { unsigned int status, tmout = 10000; do { status = p->serial_in(p, UART_LSR); if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS)) status = p->serial_in(p, UART_RX); else break; if (--tmout == 0) break; udelay(1); } while (1); }

Contributors

PersonTokensPropCommitsCommitProp
dan williamsdan williams7398.65%150.00%
thierry redingthierry reding11.35%150.00%
Total74100.00%2100.00%

#else
static inline void tegra_serial_handle_break(struct uart_port *port) { }

Contributors

PersonTokensPropCommitsCommitProp
stephen warrenstephen warren1090.91%150.00%
dan williamsdan williams19.09%150.00%
Total11100.00%2100.00%

#endif /* * Fill a struct uart_port for a given device node */
static int of_platform_serial_setup(struct platform_device *ofdev, int type, struct uart_port *port, struct of_serial_info *info) { struct resource resource; struct device_node *np = ofdev->dev.of_node; u32 clk, spd, prop; int ret; memset(port, 0, sizeof *port); if (of_property_read_u32(np, "clock-frequency", &clk)) { /* Get clk rate through clk driver if present */ info->clk = devm_clk_get(&ofdev->dev, NULL); if (IS_ERR(info->clk)) { dev_warn(&ofdev->dev, "clk or clock-frequency not defined\n"); return PTR_ERR(info->clk); } ret = clk_prepare_enable(info->clk); if (ret < 0) return ret; clk = clk_get_rate(info->clk); } /* If current-speed was set, then try not to change it. */ if (of_property_read_u32(np, "current-speed", &spd) == 0) port->custom_divisor = clk / (16 * spd); ret = of_address_to_resource(np, 0, &resource); if (ret) { dev_warn(&ofdev->dev, "invalid address\n"); goto out; } spin_lock_init(&port->lock); port->mapbase = resource.start; port->mapsize = resource_size(&resource); /* Check for shifted address mapping */ if (of_property_read_u32(np, "reg-offset", &prop) == 0) port->mapbase += prop; /* Check for registers offset within the devices address range */ if (of_property_read_u32(np, "reg-shift", &prop) == 0) port->regshift = prop; /* Check for fifo size */ if (of_property_read_u32(np, "fifo-size", &prop) == 0) port->fifosize = prop; /* Check for a fixed line number */ ret = of_alias_get_id(np, "serial"); if (ret >= 0) port->line = ret; port->irq = irq_of_parse_and_map(np, 0); port->iotype = UPIO_MEM; if (of_property_read_u32(np, "reg-io-width", &prop) == 0) { switch (prop) { case 1: port->iotype = UPIO_MEM; break; case 2: port->iotype = UPIO_MEM16; break; case 4: port->iotype = of_device_is_big_endian(np) ? UPIO_MEM32BE : UPIO_MEM32; break; default: dev_warn(&ofdev->dev, "unsupported reg-io-width (%d)\n", prop); ret = -EINVAL; goto out; } } port->type = type; port->uartclk = clk; port->flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_FIXED_PORT | UPF_FIXED_TYPE; if (of_find_property(np, "no-loopback-test", NULL)) port->flags |= UPF_SKIP_TEST; port->dev = &ofdev->dev; switch (type) { case PORT_TEGRA: port->handle_break = tegra_serial_handle_break; break; case PORT_RT2880: port->iotype = UPIO_AU; break; } if (IS_ENABLED(CONFIG_SERIAL_8250_FSL) && (of_device_is_compatible(np, "fsl,ns16550") || of_device_is_compatible(np, "fsl,16550-FIFO64"))) port->handle_irq = fsl8250_handle_irq; return 0; out: if (info->clk) clk_disable_unprepare(info->clk); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
arnd bergmannarnd bergmann16230.06%14.76%
murali karicherimurali karicheri7113.17%14.76%
grant likelygrant likely5410.02%314.29%
jamie ilesjamie iles519.46%14.76%
john linnjohn linn346.31%14.76%
scott woodscott wood295.38%14.76%
lucas stachlucas stach224.08%14.76%
masahiro yamadamasahiro yamada224.08%314.29%
heikki krogerusheikki krogerus213.90%14.76%
john crispinjohn crispin173.15%14.76%
gabor juhosgabor juhos173.15%14.76%
mans rullgardmans rullgard101.86%14.76%
wei yongjunwei yongjun91.67%14.76%
dan williamsdan williams91.67%14.76%
kevin cernekeekevin cernekee71.30%14.76%
david gibsondavid gibson20.37%14.76%
dave mitchelldave mitchell20.37%14.76%
Total539100.00%21100.00%

/* * Try to register a serial port */ static const struct of_device_id of_platform_serial_table[];
static int of_platform_serial_probe(struct platform_device *ofdev) { const struct of_device_id *match; struct of_serial_info *info; struct uart_port port; int port_type; int ret; match = of_match_device(of_platform_serial_table, &ofdev->dev); if (!match) return -EINVAL; if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL)) return -EBUSY; info = kzalloc(sizeof(*info), GFP_KERNEL); if (info == NULL) return -ENOMEM; port_type = (unsigned long)match->data; ret = of_platform_serial_setup(ofdev, port_type, &port, info); if (ret) goto out; switch (port_type) { case PORT_8250 ... PORT_MAX_8250: { struct uart_8250_port port8250; memset(&port8250, 0, sizeof(port8250)); port8250.port = port; if (port.fifosize) port8250.capabilities = UART_CAP_FIFO; if (of_property_read_bool(ofdev->dev.of_node, "auto-flow-control")) port8250.capabilities |= UART_CAP_AFE; ret = serial8250_register_8250_port(&port8250); break; } default: /* need to add code for these */ case PORT_UNKNOWN: dev_info(&ofdev->dev, "Unknown serial port found, ignored\n"); ret = -ENODEV; break; } if (ret < 0) goto out; info->type = port_type; info->line = ret; platform_set_drvdata(ofdev, info); return 0; out: kfree(info); irq_dispose_mapping(port.irq); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
arnd bergmannarnd bergmann11442.07%17.69%
kou ishizakikou ishizaki5821.40%215.38%
grant likelygrant likely3412.55%430.77%
heikki krogerusheikki krogerus3111.44%17.69%
alan coxalan cox279.96%17.69%
greg kroah-hartmangreg kroah-hartman31.11%17.69%
murali karicherimurali karicheri20.74%17.69%
jingchang lujingchang lu10.37%17.69%
jingoo hanjingoo han10.37%17.69%
Total271100.00%13100.00%

/* * Release a line */
static int of_platform_serial_remove(struct platform_device *ofdev) { struct of_serial_info *info = platform_get_drvdata(ofdev); switch (info->type) { case PORT_8250 ... PORT_MAX_8250: serial8250_unregister_port(info->line); break; default: /* need to add code for these */ break; } if (info->clk) clk_disable_unprepare(info->clk); kfree(info); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
kou ishizakikou ishizaki2842.42%116.67%
arnd bergmannarnd bergmann2131.82%116.67%
murali karicherimurali karicheri1319.70%116.67%
greg kroah-hartmangreg kroah-hartman23.03%116.67%
jingoo hanjingoo han11.52%116.67%
grant likelygrant likely11.52%116.67%
Total66100.00%6100.00%

#ifdef CONFIG_PM_SLEEP
static void of_serial_suspend_8250(struct of_serial_info *info) { struct uart_8250_port *port8250 = serial8250_get_port(info->line); struct uart_port *port = &port8250->port; serial8250_suspend_port(info->line); if (info->clk && (!uart_console(port) || console_suspend_enabled)) clk_disable_unprepare(info->clk); }

Contributors

PersonTokensPropCommitsCommitProp
jingchang lujingchang lu63100.00%1100.00%
Total63100.00%1100.00%


static void of_serial_resume_8250(struct of_serial_info *info) { struct uart_8250_port *port8250 = serial8250_get_port(info->line); struct uart_port *port = &port8250->port; if (info->clk && (!uart_console(port) || console_suspend_enabled)) clk_prepare_enable(info->clk); serial8250_resume_port(info->line); }

Contributors

PersonTokensPropCommitsCommitProp
jingchang lujingchang lu63100.00%1100.00%
Total63100.00%1100.00%


static int of_serial_suspend(struct device *dev) { struct of_serial_info *info = dev_get_drvdata(dev); switch (info->type) { case PORT_8250 ... PORT_MAX_8250: of_serial_suspend_8250(info); break; default: break; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
jingchang lujingchang lu45100.00%1100.00%
Total45100.00%1100.00%


static int of_serial_resume(struct device *dev) { struct of_serial_info *info = dev_get_drvdata(dev); switch (info->type) { case PORT_8250 ... PORT_MAX_8250: of_serial_resume_8250(info); break; default: break; } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
jingchang lujingchang lu45100.00%1100.00%
Total45100.00%1100.00%

#endif static SIMPLE_DEV_PM_OPS(of_serial_pm_ops, of_serial_suspend, of_serial_resume); /* * A few common types, add more as needed. */ static const struct of_device_id of_platform_serial_table[] = { { .compatible = "ns8250", .data = (void *)PORT_8250, }, { .compatible = "ns16450", .data = (void *)PORT_16450, }, { .compatible = "ns16550a", .data = (void *)PORT_16550A, }, { .compatible = "ns16550", .data = (void *)PORT_16550, }, { .compatible = "ns16750", .data = (void *)PORT_16750, }, { .compatible = "ns16850", .data = (void *)PORT_16850, }, { .compatible = "nvidia,tegra20-uart", .data = (void *)PORT_TEGRA, }, { .compatible = "nxp,lpc3220-uart", .data = (void *)PORT_LPC3220, }, { .compatible = "ralink,rt2880-uart", .data = (void *)PORT_RT2880, }, { .compatible = "altr,16550-FIFO32", .data = (void *)PORT_ALTR_16550_F32, }, { .compatible = "altr,16550-FIFO64", .data = (void *)PORT_ALTR_16550_F64, }, { .compatible = "altr,16550-FIFO128", .data = (void *)PORT_ALTR_16550_F128, }, { .compatible = "mrvl,mmp-uart", .data = (void *)PORT_XSCALE, }, { .compatible = "mrvl,pxa-uart", .data = (void *)PORT_XSCALE, }, { /* end of list */ }, }; MODULE_DEVICE_TABLE(of, of_platform_serial_table); static struct platform_driver of_platform_serial_driver = { .driver = { .name = "of_serial", .of_match_table = of_platform_serial_table, .pm = &of_serial_pm_ops, }, .probe = of_platform_serial_probe, .remove = of_platform_serial_remove, }; module_platform_driver(of_platform_serial_driver); MODULE_AUTHOR("Arnd Bergmann <arnd@arndb.de>"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Serial Port driver for Open Firmware platform devices");

Overall Contributors

PersonTokensPropCommitsCommitProp
arnd bergmannarnd bergmann42627.27%12.04%
jingchang lujingchang lu23515.04%24.08%
grant likelygrant likely1278.13%918.37%
kou ishizakikou ishizaki976.21%24.08%
dan williamsdan williams946.02%12.04%
murali karicherimurali karicheri925.89%12.04%
heikki krogerusheikki krogerus543.46%24.08%
jamie ilesjamie iles513.27%12.04%
ley foon tanley foon tan483.07%12.04%
rob herringrob herring352.24%24.08%
john linnjohn linn342.18%12.04%
john crispinjohn crispin332.11%12.04%
scott woodscott wood291.86%12.04%
alan coxalan cox271.73%12.04%
masahiro yamadamasahiro yamada221.41%36.12%
lucas stachlucas stach221.41%12.04%
gabor juhosgabor juhos171.09%12.04%
michal simekmichal simek161.02%12.04%
roland stiggeroland stigge161.02%12.04%
matthias fuchsmatthias fuchs161.02%12.04%
stephen warrenstephen warren120.77%12.04%
mans rullgardmans rullgard100.64%12.04%
wei yongjunwei yongjun90.58%12.04%
luis de bethencourtluis de bethencourt70.45%12.04%
kevin cernekeekevin cernekee70.45%12.04%
dongsheng wangdongsheng wang60.38%12.04%
greg kroah-hartmangreg kroah-hartman50.32%12.04%
tejun heotejun heo30.19%12.04%
david gibsondavid gibson20.13%12.04%
fabian frederickfabian frederick20.13%12.04%
jingoo hanjingoo han20.13%12.04%
dave mitchelldave mitchell20.13%12.04%
benjamin krillbenjamin krill20.13%12.04%
peter ujfalusipeter ujfalusi10.06%12.04%
thierry redingthierry reding10.06%12.04%
Total1562100.00%49100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}