cregit-Linux how code gets into the kernel

Release 4.7 drivers/tty/serial/cpm_uart/cpm_uart_cpm2.c

/*
 *  Driver for CPM (SCC/SMC) serial ports; CPM2 definitions
 *
 *  Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2)
 *              Pantelis Antoniou (panto@intracom.gr) (CPM1)
 *
 *  Copyright (C) 2004 Freescale Semiconductor, Inc.
 *            (C) 2004 Intracom, S.A.
 *            (C) 2006 MontaVista Software, Inc.
 *              Vitaly Bordug <vbordug@ru.mvista.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 */

#include <linux/module.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/serial.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/device.h>
#include <linux/bootmem.h>
#include <linux/dma-mapping.h>

#include <asm/io.h>
#include <asm/irq.h>
#include <asm/fs_pd.h>
#include <asm/prom.h>

#include <linux/serial_core.h>
#include <linux/kernel.h>

#include "cpm_uart.h"

/**************************************************************/


void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd) { cpm_command(port->command, cmd); }

Contributors

PersonTokensPropCommitsCommitProp
scott woodscott wood1672.73%133.33%
david woodhousedavid woodhouse418.18%133.33%
jochen friedrichjochen friedrich29.09%133.33%
Total22100.00%3100.00%


void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, struct device_node *np) { void __iomem *pram; unsigned long offset; struct resource res; resource_size_t len; /* Don't remap parameter RAM if it has already been initialized * during console setup. */ if (IS_SMC(port) && port->smcup) return port->smcup; else if (!IS_SMC(port) && port->sccup) return port->sccup; if (of_address_to_resource(np, 1, &res)) return NULL; len = resource_size(&res); pram = ioremap(res.start, len); if (!pram) return NULL; if (!IS_SMC(port)) return pram; if (len != 2) { printk(KERN_WARNING "cpm_uart[%d]: device tree references " "SMC pram, using boot loader/wrapper pram mapping. " "Please fix your device tree to reference the pram " "base register instead.\n", port->port.line); return pram; } offset = cpm_dpalloc(PROFF_SMC_SIZE, 64); out_be16(pram, offset); iounmap(pram); return cpm_muram_addr(offset); }

Contributors

PersonTokensPropCommitsCommitProp
laurent pinchartlaurent pinchart16997.13%150.00%
tobias klausertobias klauser52.87%150.00%
Total174100.00%2100.00%


void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram) { if (!IS_SMC(port)) iounmap(pram); }

Contributors

PersonTokensPropCommitsCommitProp
laurent pinchartlaurent pinchart28100.00%1100.00%
Total28100.00%1100.00%

/* * Allocate DP-Ram and memory buffers. We need to allocate a transmit and * receive buffer descriptors from dual port ram, and a character * buffer area from host mem. If we are allocating for the console we need * to do it from bootmem */
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con) { int dpmemsz, memsz; u8 __iomem *dp_mem; unsigned long dp_offset; u8 *mem_addr; dma_addr_t dma_addr = 0; pr_debug("CPM uart[%d]:allocbuf\n", pinfo->port.line); dpmemsz = sizeof(cbd_t) * (pinfo->rx_nrfifos + pinfo->tx_nrfifos); dp_offset = cpm_dpalloc(dpmemsz, 8); if (IS_ERR_VALUE(dp_offset)) { printk(KERN_ERR "cpm_uart_cpm.c: could not allocate buffer descriptors\n"); return -ENOMEM; } dp_mem = cpm_dpram_addr(dp_offset); memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize); if (is_con) { mem_addr = kzalloc(memsz, GFP_NOWAIT); dma_addr = virt_to_bus(mem_addr); } else mem_addr = dma_alloc_coherent(pinfo->port.dev, memsz, &dma_addr, GFP_KERNEL); if (mem_addr == NULL) { cpm_dpfree(dp_offset); printk(KERN_ERR "cpm_uart_cpm.c: could not allocate coherent memory\n"); return -ENOMEM; } pinfo->dp_addr = dp_offset; pinfo->mem_addr = mem_addr; pinfo->dma_addr = dma_addr; pinfo->mem_size = memsz; pinfo->rx_buf = mem_addr; pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize); pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem; pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos; return 0; }

Contributors

PersonTokensPropCommitsCommitProp
kumar galakumar gala16964.26%116.67%
david woodhousedavid woodhouse6625.10%116.67%
vitaly bordugvitaly bordug145.32%116.67%
scott woodscott wood62.28%116.67%
becky brucebecky bruce51.90%116.67%
mark waremark ware31.14%116.67%
Total263100.00%6100.00%


void cpm_uart_freebuf(struct uart_cpm_port *pinfo) { dma_free_coherent(pinfo->port.dev, L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) + L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize), (void __force *)pinfo->mem_addr, pinfo->dma_addr); cpm_dpfree(pinfo->dp_addr); }

Contributors

PersonTokensPropCommitsCommitProp
david woodhousedavid woodhouse2744.26%125.00%
kumar galakumar gala2439.34%125.00%
vitaly bordugvitaly bordug58.20%125.00%
becky brucebecky bruce58.20%125.00%
Total61100.00%4100.00%


Overall Contributors

PersonTokensPropCommitsCommitProp
laurent pinchartlaurent pinchart20033.22%18.33%
kumar galakumar gala19432.23%18.33%
david woodhousedavid woodhouse14023.26%18.33%
scott woodscott wood223.65%18.33%
vitaly bordugvitaly bordug223.65%216.67%
becky brucebecky bruce101.66%18.33%
tobias klausertobias klauser50.83%18.33%
tejun heotejun heo30.50%18.33%
mark waremark ware30.50%18.33%
jochen friedrichjochen friedrich20.33%18.33%
jovi zhangjovi zhang10.17%18.33%
Total602100.00%12100.00%
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}