cregit-Linux how code gets into the kernel

Release 4.7 drivers/usb/core/otg_whitelist.h

Directory: drivers/usb/core
/*
 * drivers/usb/core/otg_whitelist.h
 *
 * Copyright (C) 2004 Texas Instruments
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

/*
 * This OTG and Embedded Host Whitelist is "Targeted Peripheral List".
 * It should mostly use of USB_DEVICE() or USB_DEVICE_VER() entries..
 *
 * YOU _SHOULD_ CHANGE THIS LIST TO MATCH YOUR PRODUCT AND ITS TESTING!
 */


static struct usb_device_id whitelist_table[] = {

/* hubs are optional in OTG, but very handy ... */
{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), },
{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), },

#ifdef	CONFIG_USB_PRINTER		/* ignoring nonstatic linkage! */
/* FIXME actually, printers are NOT supposed to use device classes;
 * they're supposed to use interface classes...
 */
{ USB_DEVICE_INFO(7, 1, 1) },
{ USB_DEVICE_INFO(7, 1, 2) },
{ USB_DEVICE_INFO(7, 1, 3) },
#endif

#ifdef	CONFIG_USB_NET_CDCETHER
/* Linux-USB CDC Ethernet gadget */
{ USB_DEVICE(0x0525, 0xa4a1), },
/* Linux-USB CDC Ethernet + RNDIS gadget */
{ USB_DEVICE(0x0525, 0xa4a2), },
#endif

#if	defined(CONFIG_USB_TEST) || defined(CONFIG_USB_TEST_MODULE)
/* gadget zero, for testing */
{ USB_DEVICE(0x0525, 0xa4a0), },
#endif

{ }	/* Terminating entry */
};


static int is_targeted(struct usb_device *dev) { struct usb_device_id *id = whitelist_table; /* HNP test device is _never_ targeted (see OTG spec 6.6.6) */ if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a && le16_to_cpu(dev->descriptor.idProduct) == 0xbadd)) return 0; /* OTG PET device is always targeted (see OTG 2.0 ECN 6.4.2) */ if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a && le16_to_cpu(dev->descriptor.idProduct) == 0x0200)) return 1; /* NOTE: can't use usb_match_id() since interface caches * aren't set up yet. this is cut/paste from that code. */ for (id = whitelist_table; id->match_flags; id++) { if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) && id->idVendor != le16_to_cpu(dev->descriptor.idVendor)) continue; if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) && id->idProduct != le16_to_cpu(dev->descriptor.idProduct)) continue; /* No need to test id->bcdDevice_lo != 0, since 0 is never greater than any unsigned number. */ if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) && (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice))) continue; if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) && (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice))) continue; if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) && (id->bDeviceClass != dev->descriptor.bDeviceClass)) continue; if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) && (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass)) continue; if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) && (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol)) continue; return 1; } /* add other match criteria here ... */ /* OTG MESSAGE: report errors here, customize to match your product */ dev_err(&dev->dev, "device v%04x p%04x is not supported\n", le16_to_cpu(dev->descriptor.idVendor), le16_to_cpu(dev->descriptor.idProduct)); return 0; }

Contributors

PersonTokensPropCommitsCommitProp
david brownelldavid brownell24481.33%133.33%
macpaul linmacpaul lin3010.00%133.33%
greg kroah-hartmangreg kroah-hartman268.67%133.33%
Total300100.00%3100.00%


Overall Contributors

PersonTokensPropCommitsCommitProp
david brownelldavid brownell36686.32%120.00%
macpaul linmacpaul lin307.08%120.00%
greg kroah-hartmangreg kroah-hartman266.13%120.00%
robert p. j. dayrobert p. j. day10.24%120.00%
peter chenpeter chen10.24%120.00%
Total424100.00%5100.00%
Directory: drivers/usb/core
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}