cregit-Linux how code gets into the kernel

Release 4.7 drivers/usb/dwc3/dwc3-pci.c

Directory: drivers/usb/dwc3
/**
 * dwc3-pci.c - PCI Specific glue layer
 *
 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
 *
 * Authors: Felipe Balbi <balbi@ti.com>,
 *          Sebastian Andrzej Siewior <bigeasy@linutronix.de>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2  of
 * the License as published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/gpio/consumer.h>
#include <linux/acpi.h>

#include "platform_data.h"


#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3		0xabcd

#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI	0xabce

#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31	0xabcf

#define PCI_DEVICE_ID_INTEL_BYT			0x0f37

#define PCI_DEVICE_ID_INTEL_MRFLD		0x119e

#define PCI_DEVICE_ID_INTEL_BSW			0x22b7

#define PCI_DEVICE_ID_INTEL_SPTLP		0x9d30

#define PCI_DEVICE_ID_INTEL_SPTH		0xa130

#define PCI_DEVICE_ID_INTEL_BXT			0x0aaa

#define PCI_DEVICE_ID_INTEL_BXT_M		0x1aaa

#define PCI_DEVICE_ID_INTEL_APL			0x5aaa


static const struct acpi_gpio_params reset_gpios = { 0, 0, false };

static const struct acpi_gpio_params cs_gpios = { 1, 0, false };


static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = {
	{ "reset-gpios", &reset_gpios, 1 },
	{ "cs-gpios", &cs_gpios, 1 },
	{ },
};


static int dwc3_pci_quirks(struct pci_dev *pdev, struct platform_device *dwc3) { if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == PCI_DEVICE_ID_AMD_NL_USB) { struct dwc3_platform_data pdata; memset(&pdata, 0, sizeof(pdata)); pdata.has_lpm_erratum = true; pdata.lpm_nyet_threshold = 0xf; pdata.u2exit_lfps_quirk = true; pdata.u2ss_inp3_quirk = true; pdata.req_p1p2p3_quirk = true; pdata.del_p1p2p3_quirk = true; pdata.del_phy_power_chg_quirk = true; pdata.lfps_filter_quirk = true; pdata.rx_detect_poll_quirk = true; pdata.tx_de_emphasis_quirk = true; pdata.tx_de_emphasis = 1; /* * FIXME these quirks should be removed when AMD NL * taps out */ pdata.disable_scramble_quirk = true; pdata.dis_u3_susphy_quirk = true; pdata.dis_u2_susphy_quirk = true; return platform_device_add_data(dwc3, &pdata, sizeof(pdata)); } if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_BYT) { struct gpio_desc *gpio; acpi_dev_add_driver_gpios(ACPI_COMPANION(&pdev->dev), acpi_dwc3_byt_gpios); /* * These GPIOs will turn on the USB2 PHY. Note that we have to * put the gpio descriptors again here because the phy driver * might want to grab them, too. */ gpio = gpiod_get_optional(&pdev->dev, "cs", GPIOD_OUT_LOW); if (IS_ERR(gpio)) return PTR_ERR(gpio); gpiod_set_value_cansleep(gpio, 1); gpiod_put(gpio); gpio = gpiod_get_optional(&pdev->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(gpio)) return PTR_ERR(gpio); if (gpio) { gpiod_set_value_cansleep(gpio, 1); gpiod_put(gpio); usleep_range(10000, 11000); } } if (pdev->vendor == PCI_VENDOR_ID_SYNOPSYS && (pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 || pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI || pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31)) { struct dwc3_platform_data pdata; memset(&pdata, 0, sizeof(pdata)); pdata.usb3_lpm_capable = true; pdata.has_lpm_erratum = true; pdata.dis_enblslpm_quirk = true; return platform_device_add_data(dwc3, &pdata, sizeof(pdata)); } return 0; }

Contributors

PersonTokensPropCommitsCommitProp
heikki krogerusheikki krogerus25571.63%342.86%
john younjohn youn7821.91%228.57%
uwe kleine-koeniguwe kleine-koenig185.06%114.29%
felipe balbifelipe balbi51.40%114.29%
Total356100.00%7100.00%


static int dwc3_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) { struct resource res[2]; struct platform_device *dwc3; int ret; struct device *dev = &pci->dev; ret = pcim_enable_device(pci); if (ret) { dev_err(dev, "failed to enable pci device\n"); return -ENODEV; } pci_set_master(pci); dwc3 = platform_device_alloc("dwc3", PLATFORM_DEVID_AUTO); if (!dwc3) { dev_err(dev, "couldn't allocate dwc3 device\n"); return -ENOMEM; } memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res)); res[0].start = pci_resource_start(pci, 0); res[0].end = pci_resource_end(pci, 0); res[0].name = "dwc_usb3"; res[0].flags = IORESOURCE_MEM; res[1].start = pci->irq; res[1].name = "dwc_usb3"; res[1].flags = IORESOURCE_IRQ; ret = platform_device_add_resources(dwc3, res, ARRAY_SIZE(res)); if (ret) { dev_err(dev, "couldn't add resources to dwc3 device\n"); return ret; } dwc3->dev.parent = dev; ACPI_COMPANION_SET(&dwc3->dev, ACPI_COMPANION(dev)); ret = dwc3_pci_quirks(pci, dwc3); if (ret) goto err; ret = platform_device_add(dwc3); if (ret) { dev_err(dev, "failed to register dwc3 device\n"); goto err; } pci_set_drvdata(pci, dwc3); return 0; err: platform_device_put(dwc3); return ret; }

Contributors

PersonTokensPropCommitsCommitProp
felipe balbifelipe balbi24280.40%330.00%
heikki krogerusheikki krogerus3812.62%440.00%
chanho parkchanho park144.65%110.00%
andy shevchenkoandy shevchenko61.99%110.00%
sebastian andrzej siewiorsebastian andrzej siewior10.33%110.00%
Total301100.00%10100.00%


static void dwc3_pci_remove(struct pci_dev *pci) { acpi_dev_remove_driver_gpios(ACPI_COMPANION(&pci->dev)); platform_device_unregister(pci_get_drvdata(pci)); }

Contributors

PersonTokensPropCommitsCommitProp
felipe balbifelipe balbi1756.67%250.00%
heikki krogerusheikki krogerus1343.33%250.00%
Total30100.00%4100.00%

static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3), }, { PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI), }, { PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS, PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTLP), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SPTH), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BXT_M), }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), }, { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), }, { } /* Terminating Entry */ }; MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table); static struct pci_driver dwc3_pci_driver = { .name = "dwc3-pci", .id_table = dwc3_pci_id_table, .probe = dwc3_pci_probe, .remove = dwc3_pci_remove, }; MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("DesignWare USB3 PCI Glue Layer"); module_pci_driver(dwc3_pci_driver);

Overall Contributors

PersonTokensPropCommitsCommitProp
heikki krogerusheikki krogerus44745.29%929.03%
felipe balbifelipe balbi35135.56%619.35%
john younjohn youn10510.64%516.13%
uwe kleine-koeniguwe kleine-koenig181.82%13.23%
chanho parkchanho park141.42%13.23%
david cohendavid cohen131.32%13.23%
alan coxalan cox121.22%13.23%
huang ruihuang rui101.01%26.45%
jingoo hanjingoo han60.61%13.23%
andy shevchenkoandy shevchenko60.61%13.23%
stephen rothwellstephen rothwell30.30%13.23%
greg kroah-hartmangreg kroah-hartman10.10%13.23%
sebastian andrzej siewiorsebastian andrzej siewior10.10%13.23%
Total987100.00%31100.00%
Directory: drivers/usb/dwc3
Information contained on this website is for historical information purposes only and does not indicate or represent copyright ownership.
{% endraw %}