/* * Copyright (C) 2011 Marvell International Ltd. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, * version 2, as published by the Free Software Foundation. */ #ifndef __MV_U3D_H #define __MV_U3D_H #define MV_U3D_EP_CONTEXT_ALIGNMENT 32 #define MV_U3D_TRB_ALIGNMENT 16 #define MV_U3D_DMA_BOUNDARY 4096 #define MV_U3D_EP0_MAX_PKT_SIZE 512 /* ep0 transfer state */ #define MV_U3D_WAIT_FOR_SETUP 0 #define MV_U3D_DATA_STATE_XMIT 1 #define MV_U3D_DATA_STATE_NEED_ZLP 2 #define MV_U3D_WAIT_FOR_OUT_STATUS 3 #define MV_U3D_DATA_STATE_RECV 4 #define MV_U3D_STATUS_STAGE 5 #define MV_U3D_EP_MAX_LENGTH_TRANSFER 0x10000 /* USB3 Interrupt Status */ #define MV_U3D_USBINT_SETUP 0x00000001 #define MV_U3D_USBINT_RX_COMPLETE 0x00000002 #define MV_U3D_USBINT_TX_COMPLETE 0x00000004 #define MV_U3D_USBINT_UNDER_RUN 0x00000008 #define MV_U3D_USBINT_RXDESC_ERR 0x00000010 #define MV_U3D_USBINT_TXDESC_ERR 0x00000020 #define MV_U3D_USBINT_RX_TRB_COMPLETE 0x00000040 #define MV_U3D_USBINT_TX_TRB_COMPLETE 0x00000080 #define MV_U3D_USBINT_VBUS_VALID 0x00010000 #define MV_U3D_USBINT_STORAGE_CMD_FULL 0x00020000 #define MV_U3D_USBINT_LINK_CHG 0x01000000 /* USB3 Interrupt Enable */ #define MV_U3D_INTR_ENABLE_SETUP 0x00000001 #define MV_U3D_INTR_ENABLE_RX_COMPLETE 0x00000002 #define MV_U3D_INTR_ENABLE_TX_COMPLETE 0x00000004 #define MV_U3D_INTR_ENABLE_UNDER_RUN 0x00000008 #define MV_U3D_INTR_ENABLE_RXDESC_ERR 0x00000010 #define MV_U3D_INTR_ENABLE_TXDESC_ERR 0x00000020 #define MV_U3D_INTR_ENABLE_RX_TRB_COMPLETE 0x00000040 #define MV_U3D_INTR_ENABLE_TX_TRB_COMPLETE 0x00000080 #define MV_U3D_INTR_ENABLE_RX_BUFFER_ERR 0x00000100 #define MV_U3D_INTR_ENABLE_VBUS_VALID 0x00010000 #define MV_U3D_INTR_ENABLE_STORAGE_CMD_FULL 0x00020000 #define MV_U3D_INTR_ENABLE_LINK_CHG 0x01000000 #define MV_U3D_INTR_ENABLE_PRIME_STATUS 0x02000000 /* USB3 Link Change */ #define MV_U3D_LINK_CHANGE_LINK_UP 0x00000001 #define MV_U3D_LINK_CHANGE_SUSPEND 0x00000002 #define MV_U3D_LINK_CHANGE_RESUME 0x00000004 #define MV_U3D_LINK_CHANGE_WRESET 0x00000008 #define MV_U3D_LINK_CHANGE_HRESET 0x00000010 #define MV_U3D_LINK_CHANGE_VBUS_INVALID 0x00000020 #define MV_U3D_LINK_CHANGE_INACT 0x00000040 #define MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0 0x00000080 #define MV_U3D_LINK_CHANGE_U1 0x00000100 #define MV_U3D_LINK_CHANGE_U2 0x00000200 #define MV_U3D_LINK_CHANGE_U3 0x00000400 /* bridge setting */ #define MV_U3D_BRIDGE_SETTING_VBUS_VALID (1 << 16) /* Command Register Bit Masks */ #define MV_U3D_CMD_RUN_STOP 0x00000001 #define MV_U3D_CMD_CTRL_RESET 0x00000002 /* ep control register */ #define MV_U3D_EPXCR_EP_TYPE_CONTROL 0 #define MV_U3D_EPXCR_EP_TYPE_ISOC 1 #define MV_U3D_EPXCR_EP_TYPE_BULK 2 #define MV_U3D_EPXCR_EP_TYPE_INT 3 #define MV_U3D_EPXCR_EP_ENABLE_SHIFT 4 #define MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT 12 #define MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT 16 #define MV_U3D_USB_BULK_BURST_OUT 6 #define MV_U3D_USB_BULK_BURST_IN 14 #define MV_U3D_EPXCR_EP_FLUSH (1 << 7) #define MV_U3D_EPXCR_EP_HALT (1 << 1) #define MV_U3D_EPXCR_EP_INIT (1) /* TX/RX Status Register */ #define MV_U3D_XFERSTATUS_COMPLETE_SHIFT 24 #define MV_U3D_COMPLETE_INVALID 0 #define MV_U3D_COMPLETE_SUCCESS 1 #define MV_U3D_COMPLETE_BUFF_ERR 2 #define MV_U3D_COMPLETE_SHORT_PACKET 3 #define MV_U3D_COMPLETE_TRB_ERR 5 #define MV_U3D_XFERSTATUS_TRB_LENGTH_MASK (0xFFFFFF) #define MV_U3D_USB_LINK_BYPASS_VBUS 0x8 #define MV_U3D_LTSSM_PHY_INIT_DONE 0x80000000 #define MV_U3D_LTSSM_NEVER_GO_COMPLIANCE 0x40000000 #define MV_U3D_USB3_OP_REGS_OFFSET 0x100 #define MV_U3D_USB3_PHY_OFFSET 0xB800 #define DCS_ENABLE 0x1 /* timeout */ #define MV_U3D_RESET_TIMEOUT 10000 #define MV_U3D_FLUSH_TIMEOUT 100000 #define MV_U3D_OWN_TIMEOUT 10000 #define LOOPS_USEC_SHIFT 4 #define LOOPS_USEC (1 << LOOPS_USEC_SHIFT) #define LOOPS(timeout) ((timeout) >> LOOPS_USEC_SHIFT) /* ep direction */ #define MV_U3D_EP_DIR_IN 1 #define MV_U3D_EP_DIR_OUT 0 #define mv_u3d_ep_dir(ep) (((ep)->ep_num == 0) ? \ ((ep)->u3d->ep0_dir) : ((ep)->direction)) /* usb capability registers */ struct mv_u3d_cap_regs { u32 rsvd[5]; u32 dboff; /* doorbell register offset */ u32 rtsoff; /* runtime register offset */ u32 vuoff; /* vendor unique register offset */ }; /* operation registers */ struct mv_u3d_op_regs { u32 usbcmd; /* Command register */ u32 rsvd1[11]; u32 dcbaapl; /* Device Context Base Address low register */ u32 dcbaaph; /* Device Context Base Address high register */ u32 rsvd2[243]; u32 portsc; /* port status and control register*/ u32 portlinkinfo; /* port link info register*/ u32 rsvd3[9917]; u32 doorbell; /* doorbell register */ }; /* control enpoint enable registers */ struct epxcr { u32 epxoutcr0; /* ep out control 0 register */ u32 epxoutcr1; /* ep out control 1 register */ u32 epxincr0; /* ep in control 0 register */ u32 epxincr1; /* ep in control 1 register */ }; /* transfer status registers */ struct xferstatus { u32 curdeqlo; /* current TRB pointer low */ u32 curdeqhi; /* current TRB pointer high */ u32 statuslo; /* transfer status low */ u32 statushi; /* transfer status high */ }; /* vendor unique control registers */ struct mv_u3d_vuc_regs { u32 ctrlepenable; /* control endpoint enable register */ u32 setuplock; /* setup lock register */ u32 endcomplete; /* endpoint transfer complete register */ u32 intrcause; /* interrupt cause register */ u32 intrenable; /* interrupt enable register */ u32 trbcomplete; /* TRB complete register */ u32 linkchange; /* link change register */ u32 rsvd1[5]; u32 trbunderrun; /* TRB underrun register */ u32 rsvd2[43]; u32 bridgesetting; /* bridge setting register */ u32 rsvd3[7]; struct xferstatus txst[16]; /* TX status register */ struct xferstatus rxst[16]; /* RX status register */ u32 ltssm; /* LTSSM control register */ u32 pipe; /* PIPE control register */ u32 linkcr0; /* link control 0 register */ u32 linkcr1; /* link control 1 register */ u32 rsvd6[60]; u32 mib0; /* MIB0 counter register */ u32 usblink; /* usb link control register */ u32 ltssmstate; /* LTSSM state register */ u32 linkerrorcause; /* link error cause register */ u32 rsvd7[60]; u32 devaddrtiebrkr; /* device address and tie breaker */ u32 itpinfo0; /* ITP info 0 register */ u32 itpinfo1; /* ITP info 1 register */ u32 rsvd8[61]; struct epxcr epcr[16]; /* ep control register */ u32 rsvd9[64]; u32 phyaddr; /* PHY address register */ u32 phydata; /* PHY data register */ }; /* Endpoint context structure */ struct mv_u3d_ep_context { u32 rsvd0; u32 rsvd1; u32 trb_addr_lo; /* TRB address low 32 bit */ u32 trb_addr_hi; /* TRB address high 32 bit */ u32 rsvd2; u32 rsvd3; struct usb_ctrlrequest setup_buffer; /* setup data buffer */ }; /* TRB control data structure */ struct mv_u3d_trb_ctrl { u32 own:1; /* owner of TRB */ u32 rsvd1:3; u32 chain:1; /* associate this TRB with the next TRB on the Ring */ u32 ioc:1; /* interrupt on complete */ u32 rsvd2:4; u32 type:6; /* TRB type */ #define TYPE_NORMAL 1 #define TYPE_DATA 3 #define TYPE_LINK 6 u32 dir:1; /* Working at data stage of control endpoint operation. 0 is OUT and 1 is IN. */ u32 rsvd3:15; }; /* TRB data structure * For multiple TRB, all the TRBs' physical address should be continuous. */ struct mv_u3d_trb_hw { u32 buf_addr_lo; /* data buffer address low 32 bit */ u32 buf_addr_hi; /* data buffer address high 32 bit */ u32 trb_len; /* transfer length */ struct mv_u3d_trb_ctrl ctrl; /* TRB control data */ }; /* TRB structure */ struct mv_u3d_trb { struct mv_u3d_trb_hw *trb_hw; /* point to the trb_hw structure */ dma_addr_t trb_dma; /* dma address for this trb_hw */ struct list_head trb_list; /* trb list */ }; /* device data structure */ struct mv_u3d { struct usb_gadget gadget; struct usb_gadget_driver *driver; spinlock_t lock; /* device lock */ struct completion *done; struct device *dev; int irq; /* usb controller registers */ struct mv_u3d_cap_regs __iomem *cap_regs; struct mv_u3d_op_regs __iomem *op_regs; struct mv_u3d_vuc_regs __iomem *vuc_regs; void __iomem *phy_regs; unsigned int max_eps; struct mv_u3d_ep_context *ep_context; size_t ep_context_size; dma_addr_t ep_context_dma; struct dma_pool *trb_pool; /* for TRB data structure */ struct mv_u3d_ep *eps; struct mv_u3d_req *status_req; /* ep0 status request */ struct usb_ctrlrequest local_setup_buff; /* store setup data*/ unsigned int resume_state; /* USB state to resume */ unsigned int usb_state; /* USB current state */ unsigned int ep0_state; /* Endpoint zero state */ unsigned int ep0_dir; unsigned int dev_addr; /* device address */ unsigned int errors; unsigned softconnect:1; unsigned vbus_active:1; /* vbus is active or not */ unsigned remote_wakeup:1; /* support remote wakeup */ unsigned clock_gating:1; /* clock gating or not */ unsigned active:1; /* udc is active or not */ unsigned vbus_valid_detect:1; /* udc vbus detection */ struct mv_usb_addon_irq *vbus; unsigned int power; struct clk *clk; }; /* endpoint data structure */ struct mv_u3d_ep { struct usb_ep ep; struct mv_u3d *u3d; struct list_head queue; /* ep request queued hardware */ struct list_head req_list; /* list of ep request */ struct mv_u3d_ep_context *ep_context; /* ep context */ u32 direction; char name[14]; u32 processing; /* there is ep request queued on haredware */ spinlock_t req_lock; /* ep lock */ unsigned wedge:1; unsigned enabled:1; unsigned ep_type:2; unsigned ep_num:8; }; /* request data structure */ struct mv_u3d_req { struct usb_request req; struct mv_u3d_ep *ep; struct list_head queue; /* ep requst queued on hardware */ struct list_head list; /* ep request list */ struct list_head trb_list; /* trb list of a request */ struct mv_u3d_trb *trb_head; /* point to first trb of a request */ unsigned trb_count; /* TRB number in the chain */ unsigned chain; /* TRB chain or not */ }; #endifOverall Contributors
| Person | Tokens | Prop | Commits | CommitProp | |
| yu xu | yu xu | 1053 | 100.00% | 1 | 100.00% |
| Total | 1053 | 100.00% | 1 | 100.00% |